General:
+Changes to 1.39.3:
+22Dec05
+- Simplify code in askdir.c that waits for creating an appendable
+ volume so that it can handle multiple returns from the wait
+ code.
+- Modify the wait code to permit multiple returns.
+- Return a zero when "autochanger drives" is called and
+ it is not an autochanger.
+- Make rewind_dev() a method taking a DCR as an argument.
+ This permits closing and reopening the drive if the
+ rewind fails as happens if the drive was loaded while the
+ file descriptor was open. This refreshes the file descriptor.
+- Remove the ST_OPENED flag and always rely on fd < 0 for knowing
+ if the device is open or not. This should eliminate
+ Arnos problem.
+- Return error if reserve cannot find at least one suitable device.
+- Make wait_for_sysop() return correct state information.
+- Fix Win32 state file problem. write was not using compat
+ code. This should fix bug #500.
+21Dec05
+- Modify gui on command to set only GUI mode and not batch.
+- Modify .messages command to always print messages regardless
+ of the mode.
+- If GUI mode is on, suppress automatic printing of
+ You have messages.
+- Delete old bnet packet code.
+- Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
+ wx-console.
+- Modify restore command in wx-console to set gui on and to use
+ only .messages instead of messages. Hopefully this fixes bug
+ #514.
+- Fix seg fault in exit of acquire when canceling a job --
+ reported by Wolfgang Denk
+- Pull in latest reservation system changes from 1.38
+- Make .messages command always print messages regardless
+ of the automessages flag.
+17Dec05
+- Fix seg fault if user labels a drive directory bug #513
+- Remove quotes around Version as it breaks things.
+16Dec05
+- Merge in Aleksandar Milivojevic's mods to the spec file.
+- Apply sparse code fix for raw drives and fifos. Bug 506
+- Thorsten fixed Unicode cd problem with wx-console bug 505.
+14Dec05
+- Correct reservation system to do a last ditch try
+ for any mounted volume, then anyone anywhere.
+- Add quotes around table Version because of
+ error in MySQL 4.1.15 -- bug report submitted.
+- Correct some minor problems with btape in the fill
+ command.
+- Updates to ssh-tunnel from Joshua Kugler.
+- Added a report.pl program from Jonas Bjorklund.
+- Simplify the O_NONBLOCK open() code for tape drives,
+ and always open nonblocking.
+- Do not wait for open() if EIO returned (shouldn't happen).
+- Eliminate 3 argument to tape open().
+- Correct the slot # edited in the 3995 Bad autochanger unload
+ message.
+- With -S on bscan (show progress) do not divide by zero.
+13Dec05
+- Make cancel pthread_cond_signal() pthread_cond_broadcast().
+- When dcr is freed, also broadcast dev->wait_next_vol signal.
+- Remove unused code in wait_for_device.
+- Make wait_for_device() always return after 60 seconds of wait.
+
+Changes to 1.39.2:
+13Dec05
+- Add stubs for non-crypto build.
+12Dec05
+- Use localhost if no network configured
+11Dec05
+- Eliminated duplicate MaxVolBytes in cat update -- bug 509.
+- Remove debug print.
+- Add bail_out in error during state file reading.
+10Dec05
+- Merge changes made to 1.38.3 into HEAD
+- Add stubs for pygtk-console code
+- Create Makefile.in for pygtk-console code
+09Dec05
+- Merge updates into 1.38 branch
+- Update specs to include mysql4 define.
+- Fix when attributes are sent, must be after binit().
+- Stop read_record() if status not ok in second loop.
+- Return rec->FileIndex in dcr->VolLastIndex for normal
+ and partial records in read_record(). This allows bscan
+ to get FileIndex at EOT correct.
+- Fix butil.c to correctly set dcr -- fixes seg fault in bls.
+08Dec05
+- Fix Win32 built to work with new crypto code.
+- Apply patch supplied by user (slightly modified) to fix
+ correct detection of holes in block devices and FIFOs.
+ Bug # 506.
+- Apply patch supplied by user (slightly modified)
+ to fix SD hang with multiple pools and bad client
+ IP. Fixes bug # 508.
+07Dec05
+- Add nagios plugin to the examples directory. Submitted by
+ Christian Masopust.
+- Remove warning message about multiple saves of hardlinked files
+ from find_one.c as it can generate too many warning messages.
+- Modify most restore error messages to be queued so that they
+ appear at the end of the job rather than mixted with the restore
+ listing where they could be "lost".
+06Dec05
+- Reset timeout values before select() per patch from
+ Frank Sweetser for problems with non-blocking sockets.
+- Unlink the state file if either reading or writing it gets
+ errors. Hopefully this will fix Win32 exit problems.
+- Add sanity check in append.c to ensure that dcr is not NULL.
+ This can happen if multiple drive autochanger SCSI control
+ channel and drive indicies do not correspond.
+05Dec05
+- Get next volume from Scratch pool before creating a volume.
+- Set new Pool defaults in Vol when moved from Scratch Pool.
+- Remove argument from create_bacula_database for SQLite as it
+ caused an error.
+- Add back index code so that two drive autochangers can get
+ a second tape.
+- Change a bunch of debug levels to aid debugging autochangers.
+- Fix reservation so that mutexes are properly applied.
+- Rework reservation algorithm so that two drives can be used
+ at the same time.
+04Dec05
+- Landon merged his data encription changes into the HEAD
+- Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
+ If this patch is applied, the number of days can be specified with
+ "list nextvol days=xx"
+ or
+ "status dir days=xx"
+ My use case is to be able to preview the next scheduled job (and the
+ next tape to be used) on fridays if there are no scheduled jobs during
+ the weekend.
+Changes to 1.39.1:
+03Dec05
+- Fix font code in gnome2 console user patch. Fixes bug #501.
+- Fix malformatted bnet error message that caused seg fault
+ fixes bug 502
+- Applied user patch to improve README.vc8 in src/win32.
+29Nov05
+- Add Migrate, Copy, Archive Job types (some where there)
+- Correct some more editing of JobId's (for 64 bit compatibility).
+- Ensure that StorageId is stored in Media record when ever possible.
+- Add Migration Job to Job.
+- Add Migration Time, Migration High Bytes, Migration Low Bytes
+ Next Pool to Pool resource.
+- Add more code to mac.c (migration archive copy).
+- Change Start Storage daemon job to require read and write storage
+ pointers.
+- Pass read storage data to SD as well as write storage data.
+- Remove old code from winservice.cpp
+- Break on error in scan.
+- Fix typo in signal.c
+- Separate read/write DCR in SD. Add jcr->read_dcr.
+- Cleanup how find_device() works.
+- Add read output to Status in SD.
Changes to 1.39.0:
+23Nov05
+- Add red-black btree routines
+21Nov05
+- Remove abs() in bfile.c so that it compiles on Solaris.
+ Bug #491.
+20Nov05
+- Fix crash in tray-monitor when daemon disconnects. Bug #479.
+- Fix bnet-server bug found on OpenBSD. Bug #486
+- Fix cancel failure bug. Bug #481
+- Fix failure when Pool name has spaces. Bug #487
+- Fix SD crash in autochanger code. Mutex failure. Bug #488
+- Fix a couple of free()s in src/filed/acl.c
+- Fix memory overrun in bfile.c in building OS X resource
+ fork filename. Bug #489
+- Add Pool name to SD status output.
+14Nov05
+- Apply SunOS patch for ACLs submitted by David Duchscher.
+- Make sure to set storage before trying to set drive.
+- Add bacula_mail_summary.sh to examples directory. It makes
+ a single email summary of any number of jobs. Submitted
+ by Adrew J. Millar.
+- Make sure when we do a mount to unblock the device even
+ if the drive could not be opened.
+13Nov05
+- Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
+ and correct a few minor problems to make it build on Linux.
+10Nov05
- Remove delete of CVS from all Makefiles
- Fix seg fault when clicking on Add button in wx-console
restore panel. Bug #470.
projects / bacula / bacula / blobdiff