#
# Bacula interface to virtual autoloader using disk storage
#
-# $Id$
+# Written by Kern Sibbald
+#
+# Copyright (C) 2000-2010 Free Software Foundation Europe e.V.
+#
+# The main author of Bacula is Kern Sibbald, with contributions from
+# many others, a complete list can be found in the file AUTHORS.
+# This program is Free Software; you can redistribute it and/or
+# modify it under the terms of version three of the GNU Affero General Public
+# License as published by the Free Software Foundation, which is
+# listed in the file LICENSE.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Affero General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# Bacula® is a registered trademark of Kern Sibbald.
+# The licensor of Bacula is the Free Software Foundation Europe
+# (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+# Switzerland, email:ftf@fsfeurope.org.
+#
#
# If you set in your Device resource
#
# you will have the following input to this script:
#
# So Bacula will always call with all the following arguments, even though
-# in come cases, not all are used.
+# in come cases, not all are used. Note, the Volume name is not always
+# included.
#
-# disk-changer "changer-device" "command" "slot" "archive-device" "drive-index"
-# $1 $2 $3 $4 $5
+# disk-changer "changer-device" "command" "slot" "archive-device" "drive-index" "volume"
+# $1 $2 $3 $4 $5 $6
#
# By default the autochanger has 10 Volumes and 1 Drive.
#
#
# changer-device is the name of a file that overrides the default
# volumes and drives. It may have:
-# maxslot=n where n is one based (default 10)
-# maxdrive=m where m is zero based (default 1 -- i.e. 2 drives)
+# maxslot=n where n is one based (default 10)
+# maxdrive=m where m is zero based (default 1 -- i.e. 2 drives)
#
# This code can also simulate barcodes. You simply put
# a list of the slots and barcodes in the "base" directory/barcodes.
# any other part of the directory name. These restrictions could be
# easily removed by any clever script jockey.
#
-# Full example: disk-changer /var/bacula/conf load 1 /var/bacula/drive0 0
+# Full example: disk-changer /var/bacula/conf load 1 /var/bacula/drive0 0 TestVol001
#
# The Volumes will be created with names slot1, slot2, slot3, ... maxslot in the
# base directory. In the above example the base directory is /var/bacula.
# /var/bacula/slot3, ...) this script will create a /var/bacula/loadedn
# file to keep track of what Slot is loaded. You should not change this file.
#
+# Modified 8 June 2010 to accept Volume names from the calling program as arg 6.
+# In this case, rather than storing the data in slotn, it is stored in the
+# Volume name. Note: for this to work, Volume names may not include spaces.
#
wd=@working_dir@
#
dbgfile="$wd/disk-changer.log"
debug() {
- if test -e $dbgfile; then
- echo "`date +\"%Y%m%d-%H:%M:%S\"` $*" >> $dbgfile
+ if test -f $dbgfile; then
+ echo "`date +\"%Y%m%d-%H:%M:%S\"` $*" >> $dbgfile
fi
}
if test x${TMPFILE} = x; then
TMPFILE="$wd/disk-changer.$$"
if test -f ${TMPFILE}; then
- echo "Temp file security problem on: ${TMPFILE}"
- exit 1
+ echo "Temp file security problem on: ${TMPFILE}"
+ exit 1
fi
fi
}
pCount=$1
pCountNeed=$2
if test $pCount -lt $pCountNeed; then
- echo "usage: disk-changer ctl-device command [slot archive-device drive-index]"
- echo " Insufficient number of arguments arguments given."
- if test $pCount -lt 2; then
- echo " Mimimum usage is first two arguments ..."
- else
- echo " Command expected $pCountNeed arguments"
- fi
- exit 1
+ echo "usage: disk-changer ctl-device command [slot archive-device drive-index]"
+ echo " Insufficient number of arguments arguments given."
+ if test $pCount -lt 2; then
+ echo " Mimimum usage is first two arguments ..."
+ else
+ echo " Command expected $pCountNeed arguments"
+ fi
+ exit 1
fi
}
bn=`basename $device`
dir=`echo "$device" | sed -e s%/$bn%%g`
if [ ! -d $dir ]; then
- echo "ERROR: Autochanger directory \"$dir\" does not exist.\n"
- echo " You must create it.\n"
+ echo "ERROR: Autochanger directory \"$dir\" does not exist."
+ echo " You must create it."
exit 1
fi
}
+#
+# Get the Volume name from the call line, or directly from
+# the volslotn information.
+#
+get_vol() {
+ havevol=0
+ debug "vol=$volume"
+ if test "x$volume" != x && test "x$volume" != "x*NONE*" ; then
+ debug "touching $dir/$volume"
+ touch $dir/$volume
+ echo "$volume" >$dir/volslot${slot}
+ havevol=1
+ elif [ -f $dir/volslot${slot} ]; then
+ volume=`cat $dir/volslot${slot}`
+ havevol=1
+ fi
+}
+
# Setup arguments
ctl=$1
slot=$3
device=$4
drive=$5
+volume=$6
# set defaults
maxdrive=1
# all others are a minimum of 5
#
case $2 in
- list)
- check_parm_count $# 2
- ;;
+ list|listall)
+ check_parm_count $# 2
+ ;;
slots)
- check_parm_count $# 2
- ;;
+ check_parm_count $# 2
+ ;;
+ transfer)
+ check_parm_count $# 4
+ if [ $slot -gt $maxslot ]; then
+ echo "Slot ($slot) out of range (1-$maxslot)"
+ exit 1
+ fi
+ ;;
*)
- check_parm_count $# 5
- if [ $drive -gt $maxdrive ]; then
- echo "Drive ($drive) out of range (0-$maxdrive)"
- exit 1
- fi
- if [ $slot -gt $maxslot ]; then
- echo "Slot ($slot) out of range (1-$maxslot)"
- exit 1
- fi
- ;;
+ check_parm_count $# 5
+ if [ $drive -gt $maxdrive ]; then
+ echo "Drive ($drive) out of range (0-$maxdrive)"
+ exit 1
+ fi
+ if [ $slot -gt $maxslot ]; then
+ echo "Slot ($slot) out of range (1-$maxslot)"
+ exit 1
+ fi
+ ;;
esac
-
-debug "Parms: $ctl $cmd $slot $device $drive"
+debug "Parms: $ctl $cmd $slot $device $drive $volume $havevol"
case $cmd in
unload)
- debug "Doing disk -f $ctl unload $slot $device $drive"
+ debug "Doing disk -f $ctl unload $slot $device $drive $volume"
get_dir
- ld=`cat $dir/loaded${drive}`
+ if [ -f $dir/loaded${drive} ]; then
+ ld=`cat $dir/loaded${drive}`
+ else
+ echo "Storage Element $slot is Already Full"
+ exit 1
+ fi
if [ $slot -eq $ld ]; then
- echo "0" >$dir/loaded${drive}
- unlink $device 2>/dev/null >/dev/null
- rm -f $device
+ echo "0" >$dir/loaded${drive}
+ unlink $device 2>/dev/null >/dev/null
+ rm -f $device
else
- echo "Storage Element $slot is Already Full"
- exit 1
+ echo "Storage Element $slot is Already Full"
+ exit 1
fi
;;
load)
- debug "Doing disk $ctl load $slot $device $drive"
+ debug "Doing disk $ctl load $slot $device $drive $volume"
get_dir
+ i=0
+ while [ $i -le $maxdrive ]; do
+ if [ -f $dir/loaded${i} ]; then
+ ld=`cat $dir/loaded${i}`
+ else
+ ld=0
+ fi
+ if [ $ld -eq $slot ]; then
+ echo "Drive ${i} Full (Storage element ${ld} loaded)"
+ exit 1
+ fi
+ i=`expr $i + 1`
+ done
+ # Check if we have a Volume name
+ get_vol
+ if [ $havevol -eq 0 ]; then
+ # check if slot exists
+ if [ ! -f $dir/slot${slot} ] ; then
+ echo "source Element Address $slot is Empty"
+ exit 1
+ fi
+ fi
if [ -f $dir/loaded${drive} ]; then
- ld=`cat $dir/loaded${drive}`
+ ld=`cat $dir/loaded${drive}`
else
- ld=0
+ ld=0
fi
- if [ $ld -eq 0 ]; then
- echo "0" >$dir/loaded${drive}
- unlink $device 2>/dev/null >/dev/null
- rm -f $device
- ln -s $dir/slot${slot} $device
- rtn=$?
- if [ $rtn -eq 0 ]; then
- echo $slot >$dir/loaded${drive}
- fi
- exit $rtn
+ if [ $ld -ne 0 ]; then
+ echo "Drive ${drive} Full (Storage element ${ld} loaded)"
+ exit 1
+ fi
+ echo "0" >$dir/loaded${drive}
+ unlink $device 2>/dev/null >/dev/null
+ rm -f $device
+ if [ $havevol -ne 0 ]; then
+ ln -s $dir/$volume $device
+ rtn=$?
else
- echo "Drive ${drive} Full (Storage element ${ld} loaded)"
- exit 1
+ ln -s $dir/slot${slot} $device
+ rtn=$?
+ fi
+ if [ $rtn -eq 0 ]; then
+ echo $slot >$dir/loaded${drive}
fi
+ exit $rtn
;;
list)
debug "Doing disk -f $ctl -- to list volumes"
get_dir
if [ -f $dir/barcodes ]; then
- cat $dir/barcodes
+ cat $dir/barcodes
else
- i=1
- while [ $i -le $maxslot ]; do
- echo "$i:"
- i=`expr $i + 1`
- done
+ i=1
+ while [ $i -le $maxslot ]; do
+ slot=$i
+ volume=
+ get_vol
+ if [ $havevol -eq 0 ]; then
+ echo "$i:"
+ else
+ echo "$i:$volume"
+ fi
+ i=`expr $i + 1`
+ done
fi
exit 0
;;
+ listall)
+ # ***FIXME*** must add new Volume stuff
+ make_temp_file
+ debug "Doing disk -f $ctl -- to list volumes"
+ get_dir
+ if [ ! -f $dir/barcodes ]; then
+ exit 0
+ fi
+
+ # we print drive content seen by autochanger
+ # and we also remove loaded media from the barcode list
+ i=0
+ while [ $i -le $maxdrive ]; do
+ if [ -f $dir/loaded${i} ]; then
+ ld=`cat $dir/loaded${i}`
+ v=`awk -F: "/^$ld:/"' { print $2 }' $dir/barcodes`
+ echo "D:$i:F:$ld:$v"
+ echo "^$ld:" >> $TMPFILE
+ fi
+ i=`expr $i + 1`
+ done
+
+ # Empty slots are not in barcodes file
+ # When we detect a gap, we print missing rows as empty
+ # At the end, we fill the gap between the last entry and maxslot
+ grep -v -f $TMPFILE $dir/barcodes | sort -n | \
+ perl -ne 'BEGIN { $cur=1 }
+ if (/(\d+):(.+)?/) {
+ if ($cur == $1) {
+ print "S:$1:F:$2\n"
+ } else {
+ while ($cur < $1) {
+ print "S:$cur:E\n";
+ $cur++;
+ }
+ }
+ $cur++;
+ }
+ END { while ($cur < '"$maxslot"') { print "S:$cur:E\n"; $cur++; } } '
+
+ rm -f $TMPFILE
+ exit 0
+ ;;
+ transfer)
+ # ***FIXME*** must add new Volume stuff
+ get_dir
+ make_temp_file
+ slotdest=$device
+ if [ -f $dir/slot{$slotdest} ]; then
+ echo "destination Element Address $slot is Full"
+ exit 1
+ fi
+ if [ ! -f $dir/slot${slot} ] ; then
+ echo "source Element Address $slot is Empty"
+ exit 1
+ fi
+
+ echo "Transfering $slot to $slotdest"
+ mv $dir/slot${slot} $dir/slot{$slotdest}
+
+ if [ -f $dir/barcodes ]; then
+ sed "s/^$slot:/$slotdest:/" > $TMPFILE
+ sort -n $TMPFILE > $dir/barcodes
+ fi
+ exit 0
+ ;;
loaded)
debug "Doing disk -f $ctl $drive -- to find what is loaded"
get_dir
if [ -f $dir/loaded${drive} ]; then
- cat $dir/loaded${drive}
+ cat $dir/loaded${drive}
else
- echo "0"
+ echo "0"
fi
exit
;;