#
# Written by Kern Sibbald
#
-# Copyright (C) 2000-2009 Free Software Foundation Europe e.V.
+# Bacula(R) - The Network Backup Solution
#
-# The main author of Bacula is Kern Sibbald, with contributions from
-# many others, a complete list can be found in the file AUTHORS.
-# This program is Free Software; you can redistribute it and/or
-# modify it under the terms of version two of the GNU General Public
-# License as published by the Free Software Foundation, which is
-# listed in the file LICENSE.
+# Copyright (C) 2000-2016 Kern Sibbald
#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
+# The original author of Bacula is Kern Sibbald, with contributions
+# from many others, a complete list can be found in the file AUTHORS.
#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# You may use this file and others of this release according to the
+# license defined in the LICENSE file, which includes the Affero General
+# Public License, v3.0 ("AGPLv3") and some additional permissions and
+# terms pursuant to its AGPLv3 Section 7.
#
-# Bacula® is a registered trademark of Kern Sibbald.
-# The licensor of Bacula is the Free Software Foundation Europe
-# (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
-# Switzerland, email:ftf@fsfeurope.org.
-#
-#
-# $Id$
+# This notice must be preserved when any source code is
+# conveyed and/or propagated.
#
+# Bacula(R) is a registered trademark of Kern Sibbald.
# If you set in your Device resource
#
# Changer Command = "path-to-this-script/disk-changer %c %o %S %a %d"
# you will have the following input to this script:
#
# So Bacula will always call with all the following arguments, even though
-# in come cases, not all are used.
+# in come cases, not all are used. Note, the Volume name is not always
+# included.
#
-# disk-changer "changer-device" "command" "slot" "archive-device" "drive-index"
-# $1 $2 $3 $4 $5
+# disk-changer "changer-device" "command" "slot" "archive-device" "drive-index" "volume"
+# $1 $2 $3 $4 $5 $6
#
# By default the autochanger has 10 Volumes and 1 Drive.
#
# any other part of the directory name. These restrictions could be
# easily removed by any clever script jockey.
#
-# Full example: disk-changer /var/bacula/conf load 1 /var/bacula/drive0 0
+# Full example: disk-changer /var/bacula/conf load 1 /var/bacula/drive0 0 TestVol001
#
# The Volumes will be created with names slot1, slot2, slot3, ... maxslot in the
# base directory. In the above example the base directory is /var/bacula.
# /var/bacula/slot3, ...) this script will create a /var/bacula/loadedn
# file to keep track of what Slot is loaded. You should not change this file.
#
+# Modified 8 June 2010 to accept Volume names from the calling program as arg 6.
+# In this case, rather than storing the data in slotn, it is stored in the
+# Volume name. Note: for this to work, Volume names may not include spaces.
#
wd=@working_dir@
bn=`basename $device`
dir=`echo "$device" | sed -e s%/$bn%%g`
if [ ! -d $dir ]; then
- echo "ERROR: Autochanger directory \"$dir\" does not exist.\n"
- echo " You must create it.\n"
+ echo "ERROR: Autochanger directory \"$dir\" does not exist."
+ echo " You must create it."
exit 1
fi
}
+#
+# Get the Volume name from the call line, or directly from
+# the volslotn information.
+#
+get_vol() {
+ havevol=0
+ debug "vol=$volume"
+ if test "x$volume" != x && test "x$volume" != "x*NONE*" ; then
+ debug "touching $dir/$volume"
+ touch $dir/$volume
+ echo "$volume" >$dir/volslot${slot}
+ havevol=1
+ elif [ -f $dir/volslot${slot} ]; then
+ volume=`cat $dir/volslot${slot}`
+ havevol=1
+ fi
+}
+
# Setup arguments
ctl=$1
slot=$3
device=$4
drive=$5
+volume=$6
# set defaults
maxdrive=1
check_parm_count $# 2
;;
transfer)
- check_parm_count $# 4
+ check_parm_count $# 4
if [ $slot -gt $maxslot ]; then
echo "Slot ($slot) out of range (1-$maxslot)"
+ debug "Error: Slot ($slot) out of range (1-$maxslot)"
exit 1
fi
- ;;
+ ;;
*)
check_parm_count $# 5
if [ $drive -gt $maxdrive ]; then
echo "Drive ($drive) out of range (0-$maxdrive)"
+ debug "Error: Drive ($drive) out of range (0-$maxdrive)"
exit 1
fi
if [ $slot -gt $maxslot ]; then
echo "Slot ($slot) out of range (1-$maxslot)"
+ debug "Error: Slot ($slot) out of range (1-$maxslot)"
exit 1
fi
;;
esac
-
-debug "Parms: $ctl $cmd $slot $device $drive"
+debug "Parms: $ctl $cmd $slot $device $drive $volume $havevol"
case $cmd in
unload)
- debug "Doing disk -f $ctl unload $slot $device $drive"
+ debug "Doing disk -f $ctl unload $slot $device $drive $volume"
get_dir
if [ -f $dir/loaded${drive} ]; then
ld=`cat $dir/loaded${drive}`
else
echo "Storage Element $slot is Already Full"
+ debug "Unload error: $dir/loaded${drive} is already unloaded"
exit 1
fi
if [ $slot -eq $ld ]; then
echo "0" >$dir/loaded${drive}
unlink $device 2>/dev/null >/dev/null
- rm -f $device
+ unlink ${device}.add 2>/dev/null >/dev/null
+ rm -f ${device} ${device}.add
else
echo "Storage Element $slot is Already Full"
+ debug "Unload error: $dir/loaded${drive} slot=$ld is already unloaded"
exit 1
fi
;;
load)
- debug "Doing disk $ctl load $slot $device $drive"
+ debug "Doing disk $ctl load $slot $device $drive $volume"
get_dir
i=0
+ # Check if slot already in a drive
while [ $i -le $maxdrive ]; do
if [ -f $dir/loaded${i} ]; then
ld=`cat $dir/loaded${i}`
fi
if [ $ld -eq $slot ]; then
echo "Drive ${i} Full (Storage element ${ld} loaded)"
+ debug "Load error: Cannot load Slot=${ld} in drive=$drive. Already in drive=${i}"
exit 1
fi
i=`expr $i + 1`
done
- # check if slot exists
- if [ ! -f $dir/slot${slot} ] ; then
- echo "source Element Address $slot is Empty"
- exit 1
+ # Check if we have a Volume name
+ get_vol
+ if [ $havevol -eq 0 ]; then
+ # check if slot exists
+ if [ ! -f $dir/slot${slot} ] ; then
+ echo "source Element Address $slot is Empty"
+ debug "Load error: source Element Address $slot is Empty"
+ exit 1
+ fi
fi
if [ -f $dir/loaded${drive} ]; then
ld=`cat $dir/loaded${drive}`
fi
if [ $ld -ne 0 ]; then
echo "Drive ${drive} Full (Storage element ${ld} loaded)"
+ echo "Load error: Drive ${drive} Full (Storage element ${ld} loaded)"
exit 1
fi
echo "0" >$dir/loaded${drive}
unlink $device 2>/dev/null >/dev/null
- rm -f $device
- ln -s $dir/slot${slot} $device
- rtn=$?
+ unlink ${device}.add 2>/dev/null >/dev/null
+ rm -f ${device} ${device}.add
+ if [ $havevol -ne 0 ]; then
+ ln -s $dir/$volume $device
+ ln -s $dir/${volume}.add ${device}.add
+ rtn=$?
+ else
+ ln -s $dir/slot${slot} $device
+ ln -s $dir/slot${slot}.add ${device}.add
+ rtn=$?
+ fi
if [ $rtn -eq 0 ]; then
echo $slot >$dir/loaded${drive}
fi
else
i=1
while [ $i -le $maxslot ]; do
- echo "$i:"
+ slot=$i
+ volume=
+ get_vol
+ if [ $havevol -eq 0 ]; then
+ echo "$i:"
+ else
+ echo "$i:$volume"
+ fi
i=`expr $i + 1`
done
fi
;;
listall)
+ # ***FIXME*** must add new Volume stuff
make_temp_file
debug "Doing disk -f $ctl -- to list volumes"
get_dir
if [ ! -f $dir/barcodes ]; then
- exit 0
+ exit 0
fi
# we print drive content seen by autochanger
# and we also remove loaded media from the barcode list
- for i in $dir/loaded*
- do
- d=${i##$dir/loaded}
- s=$(cat $i)
- v=$(awk -F: "/^$s:/"' { print $2 }' $dir/barcodes)
- echo "D:$d:F:$s:$v"
- echo "^$s:" >> $TMPFILE
+ i=0
+ while [ $i -le $maxdrive ]; do
+ if [ -f $dir/loaded${i} ]; then
+ ld=`cat $dir/loaded${i}`
+ v=`awk -F: "/^$ld:/"' { print $2 }' $dir/barcodes`
+ echo "D:$i:F:$ld:$v"
+ echo "^$ld:" >> $TMPFILE
+ fi
+ i=`expr $i + 1`
done
# Empty slots are not in barcodes file
# When we detect a gap, we print missing rows as empty
# At the end, we fill the gap between the last entry and maxslot
- grep -v -f $TMPFILE $dir/barcodes | \
+ grep -v -f $TMPFILE $dir/barcodes | sort -n | \
perl -ne 'BEGIN { $cur=1 }
if (/(\d+):(.+)?/) {
- if ($cur == $1) {
- print "S:$1:F:$2\n"
- } else {
- while ($cur < $1) {
- print "S:$cur:E\n";
- $cur++;
- }
- }
- $cur++;
+ if ($cur == $1) {
+ print "S:$1:F:$2\n"
+ } else {
+ while ($cur < $1) {
+ print "S:$cur:E\n";
+ $cur++;
+ }
+ }
+ $cur++;
}
END { while ($cur < '"$maxslot"') { print "S:$cur:E\n"; $cur++; } } '
exit 0
;;
transfer)
+ # ***FIXME*** must add new Volume stuff
get_dir
make_temp_file
slotdest=$device
echo "Transfering $slot to $slotdest"
mv $dir/slot${slot} $dir/slot{$slotdest}
+ mv $dir/slot${slot}.add $dir/slot{$slotdest}.add
if [ -f $dir/barcodes ]; then
- sed "s/^$slot:/$slotdest:/" > $TMPFILE
- sort -n $TMPFILE > $dir/barcodes
+ sed "s/^$slot:/$slotdest:/" > $TMPFILE
+ sort -n $TMPFILE > $dir/barcodes
fi
exit 0
;;
debug "Doing disk -f $ctl $drive -- to find what is loaded"
get_dir
if [ -f $dir/loaded${drive} ]; then
- cat $dir/loaded${drive}
+ a=`cat $dir/loaded${drive}`
else
- echo "0"
+ a="0"
fi
+ debug "Loaded: drive=$drive is $a"
+ echo $a
exit
;;
projects / bacula / bacula / blobdiff