/*
- Bacula® - The Network Backup Solution
-
- Copyright (C) 2000-2009 Free Software Foundation Europe e.V.
-
- The main author of Bacula is Kern Sibbald, with contributions from
- many others, a complete list can be found in the file AUTHORS.
- This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
- License as published by the Free Software Foundation and included
- in the file LICENSE.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA.
-
- Bacula® is a registered trademark of Kern Sibbald.
- The licensor of Bacula is the Free Software Foundation Europe
- (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
- Switzerland, email:ftf@fsfeurope.org.
+ Bacula(R) - The Network Backup Solution
+
+ Copyright (C) 2000-2017 Kern Sibbald
+
+ The original author of Bacula is Kern Sibbald, with contributions
+ from many others, a complete list can be found in the file AUTHORS.
+
+ You may use this file and others of this release according to the
+ license defined in the LICENSE file, which includes the Affero General
+ Public License, v3.0 ("AGPLv3") and some additional permissions and
+ terms pursuant to its AGPLv3 Section 7.
+
+ This notice must be preserved when any source code is
+ conveyed and/or propagated.
+
+ Bacula(R) is a registered trademark of Kern Sibbald.
*/
/*
- *
* Bacula Director -- backup.c -- responsible for doing backup jobs
*
* Kern Sibbald, March MM
* Open connection with File daemon and pass him commands
* to do the backup.
* When the File daemon finishes the job, update the DB.
- *
- * Version $Id$
*/
#include "bacula.h"
#include "ua.h"
/* Commands sent to File daemon */
-static char backupcmd[] = "backup\n";
+static char backupcmd[] = "backup FileIndex=%ld\n";
static char storaddr[] = "storage address=%s port=%d ssl=%d\n";
/* Responses received from File daemon */
static char OKbackup[] = "2000 OK backup\n";
static char OKstore[] = "2000 OK storage\n";
+/* After 17 Aug 2013 */
+static char newEndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
+ "ReadBytes=%llu JobBytes=%llu Errors=%u "
+ "VSS=%d Encrypt=%d "
+ "CommBytes=%lld CompressCommBytes=%lld\n";
+/* Pre 17 Aug 2013 */
static char EndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
- "ReadBytes=%llu JobBytes=%llu Errors=%u "
+ "ReadBytes=%llu JobBytes=%llu Errors=%u "
"VSS=%d Encrypt=%d\n";
/* Pre 1.39.29 (04Dec06) EndJob */
static char OldEndJob[] = "2800 End Job TermCode=%d JobFiles=%u "
"ReadBytes=%llu JobBytes=%llu Errors=%u\n";
-/*
+
+/* Commands sent to Storage daemon */
+static char clientaddr[] = "client address=%s port=%d ssl=%d\n";
+
+/* Commands received from Storage daemon */
+static char OKclient[] = "3000 OK client command\n";
+
+/*
* Called here before the job is run to do the job
* specific setup.
*/
bool do_backup_init(JCR *jcr)
{
+ /* Make local copy */
+ jcr->RescheduleIncompleteJobs = jcr->job->RescheduleIncompleteJobs;
- if (jcr->get_JobLevel() == L_VIRTUAL_FULL) {
+ if (jcr->is_JobLevel(L_VIRTUAL_FULL)) {
return do_vbackup_init(jcr);
}
free_rstorage(jcr); /* we don't read so release */
return false;
}
- /*
+ /*
* Get definitive Job level and since time
*/
get_level_since_time(jcr, jcr->since, sizeof(jcr->since));
/* Take all base jobs from job resource and find the
* last L_BASE jobid.
*/
-static bool get_base_jobids(JCR *jcr, POOLMEM *jobids)
+static bool get_base_jobids(JCR *jcr, db_list_ctx *jobids)
{
JOB_DBR jr;
JOB *job;
db_get_base_jobid(jcr, jcr->db, &jr, &id);
if (id) {
- if (jobids[0]) {
- pm_strcat(jobids, ",");
+ if (jobids->count) {
+ pm_strcat(jobids->list, ",");
}
- pm_strcat(jobids, edit_uint64(id, str_jobid));
+ pm_strcat(jobids->list, edit_uint64(id, str_jobid));
+ jobids->count++;
}
}
- return *jobids != '\0';
+ return jobids->count > 0;
}
/*
- * Foreach files in currrent list, send "/path/fname\0LStat" to FD
+ * Foreach files in currrent list, send "/path/fname\0LStat\0MD5\0Delta" to FD
+ * row[0]=Path, row[1]=Filename, row[2]=FileIndex
+ * row[3]=JobId row[4]=LStat row[5]=DeltaSeq row[6]=MD5
*/
static int accurate_list_handler(void *ctx, int num_fields, char **row)
{
if (job_canceled(jcr)) {
return 1;
}
-
- if (row[2] > 0) { /* discard when file_index == 0 */
- jcr->file_bsock->fsend("%s%s%c%s", row[0], row[1], 0, row[4]);
+
+ if (row[2][0] == '0') { /* discard when file_index == 0 */
+ return 0;
+ }
+
+ /* sending with checksum */
+ if (jcr->use_accurate_chksum
+ && num_fields == 7
+ && row[6][0] /* skip checksum = '0' */
+ && row[6][1])
+ {
+ jcr->file_bsock->fsend("%s%s%c%s%c%s%c%s",
+ row[0], row[1], 0, row[4], 0, row[6], 0, row[5]);
+ } else {
+ jcr->file_bsock->fsend("%s%s%c%s%c%c%s",
+ row[0], row[1], 0, row[4], 0, 0, row[5]);
}
return 0;
}
+/* In this procedure, we check if the current fileset is using checksum
+ * FileSet-> Include-> Options-> Accurate/Verify/BaseJob=checksum
+ * This procedure uses jcr->HasBase, so it must be call after the initialization
+ */
+static bool is_checksum_needed_by_fileset(JCR *jcr)
+{
+ FILESET *f;
+ INCEXE *inc;
+ FOPTS *fopts;
+ bool in_block=false;
+ bool have_basejob_option=false;
+ if (!jcr->job || !jcr->job->fileset) {
+ return false;
+ }
+
+ f = jcr->job->fileset;
+
+ for (int i=0; i < f->num_includes; i++) { /* Parse all Include {} */
+ inc = f->include_items[i];
+
+ for (int j=0; j < inc->num_opts; j++) { /* Parse all Options {} */
+ fopts = inc->opts_list[j];
+
+ for (char *k=fopts->opts; *k ; k++) { /* Try to find one request */
+ switch (*k) {
+ case 'V': /* verify */
+ in_block = (jcr->getJobType() == JT_VERIFY); /* not used now */
+ break;
+ case 'J': /* Basejob keyword */
+ have_basejob_option = in_block = jcr->HasBase;
+ break;
+ case 'C': /* Accurate keyword */
+ in_block = !jcr->is_JobLevel(L_FULL);
+ break;
+ case ':': /* End of keyword */
+ in_block = false;
+ break;
+ case '5': /* MD5 */
+ case '1': /* SHA1 */
+ if (in_block) {
+ Dmsg0(50, "Checksum will be sent to FD\n");
+ return true;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+
+ /* By default for BaseJobs, we send the checksum */
+ if (!have_basejob_option && jcr->HasBase) {
+ return true;
+ }
+
+ Dmsg0(50, "Checksum will be sent to FD\n");
+ return false;
+}
+
/*
* Send current file list to FD
* DIR -> FD : accurate files=xxxx
- * DIR -> FD : /path/to/file\0Lstat
- * DIR -> FD : /path/to/dir/\0Lstat
+ * DIR -> FD : /path/to/file\0Lstat\0MD5\0Delta
+ * DIR -> FD : /path/to/dir/\0Lstat\0MD5\0Delta
* ...
* DIR -> FD : EOD
*/
bool send_accurate_current_files(JCR *jcr)
{
POOL_MEM buf;
- bool ret=true;
+ db_list_ctx jobids;
+ db_list_ctx nb;
+ char ed1[50];
- if (!jcr->accurate || job_canceled(jcr)) {
+ /* In base level, no previous job is used and no restart incomplete jobs */
+ if (jcr->is_canceled() || jcr->is_JobLevel(L_BASE)) {
return true;
}
- /* In base level, no previous job is used */
- if (jcr->get_JobLevel() == L_BASE) {
+ if (!jcr->accurate && !jcr->rerunning) {
return true;
}
- POOLMEM *nb = get_pool_memory(PM_FNAME);
- POOLMEM *jobids = get_pool_memory(PM_FNAME);
- nb[0] = jobids[0] = '\0';
-
- if (jcr->get_JobLevel() == L_FULL) {
+ if (jcr->is_JobLevel(L_FULL)) {
/* On Full mode, if no previous base job, no accurate things */
- if (!get_base_jobids(jcr, jobids)) {
- goto bail_out;
+ if (get_base_jobids(jcr, &jobids)) {
+ jcr->HasBase = true;
+ Jmsg(jcr, M_INFO, 0, _("Using BaseJobId(s): %s\n"), jobids.list);
+ } else if (!jcr->rerunning) {
+ return true;
}
- jcr->HasBase = true;
- Jmsg(jcr, M_INFO, 0, _("Using BaseJobId(s): %s\n"), jobids);
+
+ } else if (jcr->is_JobLevel(L_VERIFY_DATA)) {
+ char ed1[50];
+ jobids.add(edit_uint64(jcr->previous_jr.JobId, ed1));
} else {
/* For Incr/Diff level, we search for older jobs */
- db_accurate_get_jobids(jcr, jcr->db, &jcr->jr, jobids);
+ db_get_accurate_jobids(jcr, jcr->db, &jcr->jr, &jobids);
/* We are in Incr/Diff, but no Full to build the accurate list... */
- if (*jobids == 0) {
- ret=false;
+ if (jobids.count == 0) {
Jmsg(jcr, M_FATAL, 0, _("Cannot find previous jobids.\n"));
- goto bail_out;
+ return false; /* fail */
}
}
+ /* For incomplete Jobs, we add our own id */
+ if (jcr->rerunning) {
+ edit_int64(jcr->JobId, ed1);
+ jobids.add(ed1);
+ }
+
+ /* Don't send and store the checksum if fileset doesn't require it */
+ jcr->use_accurate_chksum = is_checksum_needed_by_fileset(jcr);
+
if (jcr->JobId) { /* display the message only for real jobs */
- Jmsg(jcr, M_INFO, 0, _("Sending Accurate information.\n"));
+ Jmsg(jcr, M_INFO, 0, _("Sending Accurate information to the FD.\n"));
}
/* to be able to allocate the right size for htable */
- Mmsg(buf, "SELECT sum(JobFiles) FROM Job WHERE JobId IN (%s)",jobids);
- db_sql_query(jcr->db, buf.c_str(), db_get_int_handler, nb);
- Dmsg2(0, "jobids=%s nb=%s\n", jobids, nb);
- jcr->file_bsock->fsend("accurate files=%s\n", nb);
+ Mmsg(buf, "SELECT sum(JobFiles) FROM Job WHERE JobId IN (%s)", jobids.list);
+ db_sql_query(jcr->db, buf.c_str(), db_list_handler, &nb);
+ Dmsg2(200, "jobids=%s nb=%s\n", jobids.list, nb.list);
+ jcr->file_bsock->fsend("accurate files=%s\n", nb.list);
if (!db_open_batch_connexion(jcr, jcr->db)) {
- ret = false;
- Jmsg0(jcr, M_FATAL, 0, "Can't get dedicate sql connexion");
- goto bail_out;
+ Jmsg0(jcr, M_FATAL, 0, "Can't get batch sql connexion");
+ return false; /* Fail */
}
-
+
if (jcr->HasBase) {
- jcr->nb_base_files = str_to_int64(nb);
- db_create_base_file_list(jcr, jcr->db, jobids);
- db_get_base_file_list(jcr, jcr->db,
- accurate_list_handler, (void *)jcr);
+ jcr->nb_base_files = str_to_int64(nb.list);
+ if (!db_create_base_file_list(jcr, jcr->db, jobids.list)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ if (!db_get_base_file_list(jcr, jcr->db, jcr->use_accurate_chksum,
+ accurate_list_handler, (void *)jcr)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
} else {
- db_get_file_list(jcr, jcr->db_batch, jobids,
- accurate_list_handler, (void *)jcr);
- }
-
- /* TODO: close the batch connexion ? (can be used very soon) */
+ if (!db_get_file_list(jcr, jcr->db_batch,
+ jobids.list, jcr->use_accurate_chksum, false /* no delta */,
+ accurate_list_handler, (void *)jcr)) {
+ Jmsg1(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db_batch));
+ return false;
+ }
+ }
+ /* TODO: close the batch connection ? (can be used very soon) */
jcr->file_bsock->signal(BNET_EOD);
+ return true;
+}
-bail_out:
- free_pool_memory(jobids);
- free_pool_memory(nb);
+bool send_store_addr_to_fd(JCR *jcr, STORE *store,
+ char *store_address, uint32_t store_port)
+{
+ int tls_need = BNET_TLS_NONE;
+
+ /* TLS Requirement */
+ if (store->tls_enable) {
+ if (store->tls_require) {
+ tls_need = BNET_TLS_REQUIRED;
+ } else {
+ tls_need = BNET_TLS_OK;
+ }
+ }
- return ret;
+ /*
+ * Send Storage address to the FD
+ */
+ jcr->file_bsock->fsend(storaddr, store_address, store_port, tls_need);
+ if (!response(jcr, jcr->file_bsock, OKstore, "Storage", DISPLAY_ERROR)) {
+ return false;
+ }
+ return true;
+}
+
+bool send_client_addr_to_sd(JCR *jcr)
+{
+ int tls_need = BNET_TLS_NONE;
+ BSOCK *sd = jcr->store_bsock;
+ POOL_MEM buf;
+
+ /* TLS Requirement for the client */
+ if (jcr->client->tls_enable) {
+ if (jcr->client->tls_require) {
+ tls_need = BNET_TLS_REQUIRED;
+ } else {
+ tls_need = BNET_TLS_OK;
+ }
+ }
+ /*
+ * Send Client address to the SD
+ */
+ sd->fsend(clientaddr, jcr->client->address(buf.addr()), jcr->client->FDport, tls_need);
+ if (!response(jcr, sd, OKclient, "Client", DISPLAY_ERROR)) {
+ return false;
+ }
+ return true;
+}
+
+/*
+ * Allow to specify the address used by the Client to
+ * connect to the storage daemon in the Client resource
+ * or in the Storage resource.
+ */
+char *get_storage_address(CLIENT *client, STORE *store)
+{
+ char *store_address;
+
+ if (client && client->fd_storage_address) {
+ Dmsg0(10, "Using Client resource FD Storage Address to contact the Storage\n");
+ store_address = client->fd_storage_address;
+
+ } else if (store->fd_storage_address) {
+ Dmsg0(10, "Using Storage resource FD Storage Address to contact the Storage\n");
+ store_address = store->fd_storage_address;
+
+ } else {
+ Dmsg0(10, "Using default Storage address\n");
+ store_address = store->address;
+ }
+ return store_address;
+}
+
+bool run_storage_and_start_message_thread(JCR *jcr, BSOCK *sd)
+{
+ /*
+ * Start the job prior to starting the message thread below
+ * to avoid two threads from using the BSOCK structure at
+ * the same time.
+ */
+ if (!sd->fsend("run")) {
+ return false;
+ }
+
+ /*
+ * Now start a Storage daemon message thread. Note,
+ * this thread is used to provide the catalog services
+ * for the backup job, including inserting the attributes
+ * into the catalog. See catalog_update() in catreq.c
+ */
+ if (!start_storage_daemon_message_thread(jcr)) {
+ return false;
+ }
+ Dmsg0(150, "Storage daemon connection OK\n");
+ return true;
}
/*
bool do_backup(JCR *jcr)
{
int stat;
- int tls_need = BNET_TLS_NONE;
- BSOCK *fd;
+ BSOCK *fd, *sd;
STORE *store;
+ char *store_address;
+ uint32_t store_port;
char ed1[100];
+ db_int64_ctx job;
+ POOL_MEM buf;
- if (jcr->get_JobLevel() == L_VIRTUAL_FULL) {
+ if (jcr->is_JobLevel(L_VIRTUAL_FULL)) {
return do_vbackup(jcr);
}
/* Print Job Start message */
- Jmsg(jcr, M_INFO, 0, _("Start Backup JobId %s, Job=%s\n"),
- edit_uint64(jcr->JobId, ed1), jcr->Job);
+ if (jcr->rerunning) {
+ Jmsg(jcr, M_INFO, 0, _("Restart Incomplete Backup JobId %s, Job=%s\n"),
+ edit_uint64(jcr->JobId, ed1), jcr->Job);
+ } else {
+ Jmsg(jcr, M_INFO, 0, _("Start Backup JobId %s, Job=%s\n"),
+ edit_uint64(jcr->JobId, ed1), jcr->Job);
+ }
- set_jcr_job_status(jcr, JS_Running);
+ jcr->setJobStatus(JS_Running);
Dmsg2(100, "JobId=%d JobLevel=%c\n", jcr->jr.JobId, jcr->jr.JobLevel);
if (!db_update_job_start_record(jcr, jcr->db, &jcr->jr)) {
Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
return false;
}
+ /* For incomplete Jobs, we add our own id */
+ if (jcr->rerunning) {
+ edit_int64(jcr->JobId, ed1);
+ Mmsg(buf, "SELECT max(FileIndex) FROM File WHERE JobId=%s", ed1);
+ if (db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_INFO, 0, _("Found %ld files from prior incomplete Job.\n"),
+ (int32_t)job.value);
+ } else {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->JobFiles = job.value;
+ Dmsg1(100, "==== FI=%ld\n", jcr->JobFiles);
+ Mmsg(buf, "SELECT VolSessionId FROM Job WHERE JobId=%s", ed1);
+ if (!db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->VolSessionId = job.value;
+ Mmsg(buf, "SELECT VolSessionTime FROM Job WHERE JobId=%s", ed1);
+ if (!db_sql_query(jcr->db, buf.c_str(), db_int64_handler, &job)) {
+ Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ return false;
+ }
+ jcr->VolSessionTime = job.value;
+ Dmsg4(100, "JobId=%s JobFiles=%ld VolSessionId=%ld VolSessionTime=%ld\n", ed1,
+ jcr->JobFiles, jcr->VolSessionId, jcr->VolSessionTime);
+ }
+
/*
* Open a message channel connection with the Storage
* daemon. This is to let him know that our client
*
*/
Dmsg0(110, "Open connection with storage daemon\n");
- set_jcr_job_status(jcr, JS_WaitSD);
+ jcr->setJobStatus(JS_WaitSD);
/*
* Start conversation with Storage daemon
*/
if (!start_storage_daemon_job(jcr, NULL, jcr->wstorage)) {
return false;
}
-
- /*
- * Start the job prior to starting the message thread below
- * to avoid two threads from using the BSOCK structure at
- * the same time.
- */
- if (!bnet_fsend(jcr->store_bsock, "run")) {
- return false;
+ sd = jcr->store_bsock;
+ if (jcr->client) {
+ jcr->sd_calls_client = jcr->client->sd_calls_client;
}
-
/*
- * Now start a Storage daemon message thread. Note,
- * this thread is used to provide the catalog services
- * for the backup job, including inserting the attributes
- * into the catalog. See catalog_update() in catreq.c
+ * Note startup sequence of SD/FD is different depending on
+ * whether the SD listens (normal) or the SD calls the FD.
*/
- if (!start_storage_daemon_message_thread(jcr)) {
- return false;
+ if (!jcr->sd_calls_client) {
+ if (!run_storage_and_start_message_thread(jcr, sd)) {
+ goto bail_out;
+ }
}
- Dmsg0(150, "Storage daemon connection OK\n");
-
- set_jcr_job_status(jcr, JS_WaitFD);
+ jcr->setJobStatus(JS_WaitFD);
if (!connect_to_file_daemon(jcr, 10, FDConnectTimeout, 1)) {
goto bail_out;
}
- set_jcr_job_status(jcr, JS_Running);
+ jcr->setJobStatus(JS_Running);
fd = jcr->file_bsock;
+ if (!send_level_command(jcr)) {
+ goto bail_out;
+ }
+
if (!send_include_list(jcr)) {
goto bail_out;
}
goto bail_out;
}
- if (!send_level_command(jcr)) {
- goto bail_out;
+ /* TODO: See priority with bandwidth parameter */
+ if (jcr->job->max_bandwidth > 0) {
+ jcr->max_bandwidth = jcr->job->max_bandwidth;
+ } else if (jcr->client->max_bandwidth > 0) {
+ jcr->max_bandwidth = jcr->client->max_bandwidth;
}
- /*
- * send Storage daemon address to the File daemon
- */
- store = jcr->wstore;
- if (store->SDDport == 0) {
- store->SDDport = store->SDport;
+ if (jcr->max_bandwidth > 0) {
+ send_bwlimit(jcr, jcr->Job); /* Old clients don't have this command */
}
- /* TLS Requirement */
- if (store->tls_enable) {
- if (store->tls_require) {
- tls_need = BNET_TLS_REQUIRED;
- } else {
- tls_need = BNET_TLS_OK;
+ send_snapshot_retention(jcr, jcr->snapshot_retention);
+
+ store = jcr->wstore;
+
+ if (jcr->sd_calls_client) {
+ if (jcr->FDVersion < 10) {
+ Jmsg(jcr, M_FATAL, 0, _("The File daemon does not support SDCallsClient.\n"));
+ goto bail_out;
+ }
+ if (!send_client_addr_to_sd(jcr)) {
+ goto bail_out;
}
+
+ if (!run_storage_and_start_message_thread(jcr, sd)) {
+ goto bail_out;
+ }
+
+ store_address = jcr->wstore->address; /* dummy */
+ store_port = 0; /* flag that SD calls FD */
+ } else {
+ /*
+ * send Storage daemon address to the File daemon
+ */
+ if (store->SDDport == 0) {
+ store->SDDport = store->SDport;
+ }
+
+ store_address = get_storage_address(jcr->client, store);
+ store_port = store->SDDport;
}
- fd->fsend(storaddr, store->address, store->SDDport, tls_need);
- if (!response(jcr, fd, OKstore, "Storage", DISPLAY_ERROR)) {
+ if (!send_store_addr_to_fd(jcr, store, store_address, store_port)) {
goto bail_out;
}
+ /* Declare the job started to start the MaxRunTime check */
+ jcr->setJobStarted();
+
+ /* Send and run the RunBefore */
if (!send_runscripts_commands(jcr)) {
goto bail_out;
}
- /*
+ /*
* We re-update the job start record so that the start
- * time is set after the run before job. This avoids
+ * time is set after the run before job. This avoids
* that any files created by the run before job will
* be saved twice. They will be backed up in the current
* job, but not in the next one unless they are changed.
* Without this, they will be backed up in this job and
- * in the next job run because in that case, their date
+ * in the next job run because in that case, their date
* is after the start of this run.
*/
jcr->start_time = time(NULL);
* all files to FD.
*/
if (!send_accurate_current_files(jcr)) {
- goto bail_out;
+ goto bail_out; /* error */
}
/* Send backup command */
- fd->fsend(backupcmd);
+ fd->fsend(backupcmd, jcr->JobFiles);
+ Dmsg1(100, ">filed: %s", fd->msg);
if (!response(jcr, fd, OKbackup, "backup", DISPLAY_ERROR)) {
goto bail_out;
}
stat = wait_for_job_termination(jcr);
db_write_batch_file_records(jcr); /* used by bulk batch file insert */
- if (jcr->HasBase &&
- !db_commit_base_file_attributes_record(jcr, jcr->db))
- {
- Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
+ if (jcr->HasBase) {
+ db_commit_base_file_attributes_record(jcr, jcr->db);
+ /* Any error already printed */
}
- if (stat == JS_Terminated) {
+ if (!jcr->is_canceled() && stat == JS_Terminated) {
backup_cleanup(jcr, stat);
return true;
- }
+ }
return false;
/* Come here only after starting SD thread */
bail_out:
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ jcr->setJobStatus(JS_ErrorTerminated);
Dmsg1(400, "wait for sd. use=%d\n", jcr->use_count());
/* Cancel SD */
wait_for_job_termination(jcr, FDConnectTimeout);
uint32_t JobWarnings = 0;
uint64_t ReadBytes = 0;
uint64_t JobBytes = 0;
- int VSS = 0;
+ uint64_t CommBytes = 0;
+ uint64_t CommCompressedBytes = 0;
+ int VSS = 0; /* or Snapshot on Unix */
int Encrypt = 0;
btimer_t *tid=NULL;
- set_jcr_job_status(jcr, JS_Running);
-
if (fd) {
if (timeout) {
tid = start_bsock_timer(fd, timeout); /* TODO: New timeout directive??? */
}
/* Wait for Client to terminate */
while ((n = bget_dirmsg(fd)) >= 0) {
- if (!fd_ok &&
- (sscanf(fd->msg, EndJob, &jcr->FDJobStatus, &JobFiles,
+ if (!fd_ok &&
+ (sscanf(fd->msg, newEndJob, &jcr->FDJobStatus, &JobFiles,
+ &ReadBytes, &JobBytes, &JobErrors, &VSS, &Encrypt,
+ &CommBytes, &CommCompressedBytes) == 9 ||
+ sscanf(fd->msg, EndJob, &jcr->FDJobStatus, &JobFiles,
&ReadBytes, &JobBytes, &JobErrors, &VSS, &Encrypt) == 7 ||
sscanf(fd->msg, OldEndJob, &jcr->FDJobStatus, &JobFiles,
&ReadBytes, &JobBytes, &JobErrors) == 5)) {
fd_ok = true;
- set_jcr_job_status(jcr, jcr->FDJobStatus);
+ jcr->setJobStatus(jcr->FDJobStatus);
Dmsg1(100, "FDStatus=%c\n", (char)jcr->JobStatus);
} else {
Jmsg(jcr, M_WARNING, 0, _("Unexpected Client Job message: %s\n"),
stop_bsock_timer(tid);
}
- if (is_bnet_error(fd)) {
+ if (fd->is_error() && jcr->getJobStatus() != JS_Canceled) {
+ int i = 0;
Jmsg(jcr, M_FATAL, 0, _("Network error with FD during %s: ERR=%s\n"),
- job_type_to_str(jcr->get_JobType()), fd->bstrerror());
+ job_type_to_str(jcr->getJobType()), fd->bstrerror());
+ while (i++ < 20 && jcr->job->RescheduleIncompleteJobs && jcr->is_canceled()) {
+ bmicrosleep(3, 0);
+ }
}
fd->signal(BNET_TERMINATE); /* tell Client we are terminating */
}
- /* Force cancel in SD if failing */
- if (job_canceled(jcr) || !fd_ok) {
+ /*
+ * Force cancel in SD if failing, but not for Incomplete jobs
+ * so that we let the SD despool.
+ */
+ Dmsg5(100, "cancel=%d fd_ok=%d FDJS=%d JS=%d SDJS=%d\n", jcr->is_canceled(), fd_ok, jcr->FDJobStatus,
+ jcr->JobStatus, jcr->SDJobStatus);
+ if (jcr->is_canceled() || (!jcr->job->RescheduleIncompleteJobs && !fd_ok)) {
+ Dmsg4(100, "fd_ok=%d FDJS=%d JS=%d SDJS=%d\n", fd_ok, jcr->FDJobStatus,
+ jcr->JobStatus, jcr->SDJobStatus);
cancel_storage_daemon_job(jcr);
}
jcr->ReadBytes = ReadBytes;
jcr->JobBytes = JobBytes;
jcr->JobWarnings = JobWarnings;
- jcr->VSS = VSS;
+ jcr->CommBytes = CommBytes;
+ jcr->CommCompressedBytes = CommCompressedBytes;
+ jcr->Snapshot = VSS;
jcr->Encrypt = Encrypt;
- } else {
+ } else if (jcr->getJobStatus() != JS_Canceled) {
Jmsg(jcr, M_FATAL, 0, _("No Job status returned from FD.\n"));
}
-// Dmsg4(100, "fd_ok=%d FDJS=%d JS=%d SDJS=%d\n", fd_ok, jcr->FDJobStatus,
-// jcr->JobStatus, jcr->SDJobStatus);
-
/* Return the first error status we find Dir, FD, or SD */
- if (!fd_ok || is_bnet_error(fd)) { /* if fd not set, that use !fd_ok */
- jcr->FDJobStatus = JS_ErrorTerminated;
+ if (!fd_ok || fd->is_error()) { /* if fd not set, that use !fd_ok */
+ if (jcr->getJobStatus() == JS_Canceled) {
+ jcr->FDJobStatus = JS_Canceled;
+ } else {
+ jcr->FDJobStatus = JS_ErrorTerminated;
+ }
}
if (jcr->JobStatus != JS_Terminated) {
return jcr->JobStatus;
void backup_cleanup(JCR *jcr, int TermCode)
{
char sdt[50], edt[50], schedt[50];
- char ec1[30], ec2[30], ec3[30], ec4[30], ec5[30], compress[50];
- char ec6[30], ec7[30], ec8[30], elapsed[50];
- char term_code[100], fd_term_msg[100], sd_term_msg[100];
- const char *term_msg;
+ char ec1[30], ec2[30], ec3[30], ec4[30], ec5[30];
+ char ec6[30], ec7[30], ec8[30], ec9[30], ec10[30], elapsed[50];
+ char data_compress[200], comm_compress[200];
+ char fd_term_msg[100], sd_term_msg[100];
+ POOL_MEM term_msg;
int msg_type = M_INFO;
MEDIA_DBR mr;
CLIENT_DBR cr;
- double kbps, compression;
+ double kbps, compression, ratio;
utime_t RunTime;
+ POOL_MEM base_info;
+ POOL_MEM vol_info;
- if (jcr->get_JobLevel() == L_VIRTUAL_FULL) {
+ remove_dummy_jobmedia_records(jcr);
+
+ if (jcr->is_JobLevel(L_VIRTUAL_FULL)) {
vbackup_cleanup(jcr, TermCode);
return;
}
Dmsg2(100, "Enter backup_cleanup %d %c\n", TermCode, TermCode);
- memset(&mr, 0, sizeof(mr));
memset(&cr, 0, sizeof(cr));
+#ifdef xxxx
+ /* The current implementation of the JS_Warning status is not
+ * completed. SQL part looks to be ok, but the code is using
+ * JS_Terminated almost everywhere instead of (JS_Terminated || JS_Warning)
+ * as we do with is_canceled()
+ */
+ if (jcr->getJobStatus() == JS_Terminated &&
+ (jcr->JobErrors || jcr->SDErrors || jcr->JobWarnings)) {
+ TermCode = JS_Warnings;
+ }
+#endif
+
update_job_end(jcr, TermCode);
if (!db_get_job_record(jcr, jcr->db, &jcr->jr)) {
Jmsg(jcr, M_WARNING, 0, _("Error getting Job record for Job report: ERR=%s"),
db_strerror(jcr->db));
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ jcr->setJobStatus(JS_ErrorTerminated);
}
bstrncpy(cr.Name, jcr->client->name(), sizeof(cr.Name));
if (!db_get_media_record(jcr, jcr->db, &mr)) {
Jmsg(jcr, M_WARNING, 0, _("Error getting Media record for Volume \"%s\": ERR=%s"),
mr.VolumeName, db_strerror(jcr->db));
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ jcr->setJobStatus(JS_ErrorTerminated);
}
update_bootstrap_file(jcr);
switch (jcr->JobStatus) {
case JS_Terminated:
if (jcr->JobErrors || jcr->SDErrors) {
- term_msg = _("Backup OK -- with warnings");
+ Mmsg(term_msg, _("Backup OK -- %s"), jcr->StatusErrMsg[0] ? jcr->StatusErrMsg : _("with warnings"));
+
} else {
- term_msg = _("Backup OK");
+ Mmsg(term_msg, _("Backup OK"));
}
break;
+ case JS_Incomplete:
+ Mmsg(term_msg, _("Backup failed -- incomplete"));
+ break;
case JS_Warnings:
- term_msg = _("Backup OK -- with warnings");
+ Mmsg(term_msg, _("Backup OK -- %s"), jcr->StatusErrMsg[0] ? jcr->StatusErrMsg : _("with warnings"));
break;
case JS_FatalError:
case JS_ErrorTerminated:
- term_msg = _("*** Backup Error ***");
+ Mmsg(term_msg, _("*** Backup Error ***"));
msg_type = M_ERROR; /* Generate error message */
if (jcr->store_bsock) {
jcr->store_bsock->signal(BNET_TERMINATE);
- if (jcr->SD_msg_chan) {
+ if (jcr->SD_msg_chan_started) {
pthread_cancel(jcr->SD_msg_chan);
}
}
break;
case JS_Canceled:
- term_msg = _("Backup Canceled");
+ Mmsg(term_msg, _("Backup Canceled"));
if (jcr->store_bsock) {
jcr->store_bsock->signal(BNET_TERMINATE);
- if (jcr->SD_msg_chan) {
+ if (jcr->SD_msg_chan_started) {
pthread_cancel(jcr->SD_msg_chan);
}
}
break;
default:
- term_msg = term_code;
- sprintf(term_code, _("Inappropriate term code: %c\n"), jcr->JobStatus);
+ Mmsg(term_msg, _("Inappropriate term code: %c\n"), jcr->JobStatus);
break;
}
bstrftimes(schedt, sizeof(schedt), jcr->jr.SchedTime);
bstrftimes(edt, sizeof(edt), jcr->jr.EndTime);
RunTime = jcr->jr.EndTime - jcr->jr.StartTime;
if (RunTime <= 0) {
- kbps = 0;
- } else {
- kbps = ((double)jcr->jr.JobBytes) / (1000.0 * (double)RunTime);
+ RunTime = 1;
}
+ kbps = ((double)jcr->jr.JobBytes) / (1000.0 * (double)RunTime);
if (!db_get_job_volume_names(jcr, jcr->db, jcr->jr.JobId, &jcr->VolumeName)) {
/*
* Note, if the job has erred, most likely it did not write any
}
if (jcr->ReadBytes == 0) {
- bstrncpy(compress, "None", sizeof(compress));
+ bstrncpy(data_compress, "None", sizeof(data_compress));
+ } else {
+ compression = (double)100 - 100.0 * ((double)jcr->SDJobBytes / (double)jcr->ReadBytes);
+ if (compression < 0.5) {
+ bstrncpy(data_compress, "None", sizeof(data_compress));
+ } else {
+ if (jcr->SDJobBytes > 0) {
+ ratio = (double)jcr->ReadBytes / (double)jcr->SDJobBytes;
+ } else {
+ ratio = 1.0;
+ }
+ bsnprintf(data_compress, sizeof(data_compress), "%.1f%% %.1f:1",
+ compression, ratio);
+ }
+ }
+ if (jcr->CommBytes == 0 || jcr->CommCompressedBytes == 0) {
+ bstrncpy(comm_compress, "None", sizeof(comm_compress));
} else {
- compression = (double)100 - 100.0 * ((double)jcr->JobBytes / (double)jcr->ReadBytes);
+ compression = (double)100 - 100.0 * ((double)jcr->CommCompressedBytes / (double)jcr->CommBytes);
if (compression < 0.5) {
- bstrncpy(compress, "None", sizeof(compress));
+ bstrncpy(comm_compress, "None", sizeof(comm_compress));
} else {
- bsnprintf(compress, sizeof(compress), "%.1f %%", compression);
+ ratio = (double)jcr->CommBytes / (double)jcr->CommCompressedBytes;
+ bsnprintf(comm_compress, sizeof(comm_compress), "%.1f%% %.1f:1",
+ compression, ratio);
}
+ Dmsg2(200, "=== CommCompressed=%lld CommBytes=%lld\n",
+ jcr->CommCompressedBytes, jcr->CommBytes);
}
jobstatus_to_ascii(jcr->FDJobStatus, fd_term_msg, sizeof(fd_term_msg));
jobstatus_to_ascii(jcr->SDJobStatus, sd_term_msg, sizeof(sd_term_msg));
if (jcr->HasBase) {
- Dmsg3(0, "Base files/Used files %lld/%lld=%.2f%%\n", jcr->nb_base_files,
- jcr->nb_base_files_used,
- jcr->nb_base_files_used*100.0/jcr->nb_base_files);
+ Mmsg(base_info, _(" Base files/Used files: %lld/%lld (%.2f%%)\n"),
+ jcr->nb_base_files,
+ jcr->nb_base_files_used,
+ jcr->nb_base_files_used*100.0/jcr->nb_base_files);
}
+ /* Edit string for last volume size */
+ if (mr.VolABytes != 0) {
+ Mmsg(vol_info, _("meta: %s (%sB) aligned: %s (%sB)"),
+ edit_uint64_with_commas(mr.VolBytes, ec7),
+ edit_uint64_with_suffix(mr.VolBytes, ec8),
+ edit_uint64_with_commas(mr.VolABytes, ec9),
+ edit_uint64_with_suffix(mr.VolABytes, ec10));
+ } else {
+ Mmsg(vol_info, _("%s (%sB)"),
+ edit_uint64_with_commas(mr.VolBytes, ec7),
+ edit_uint64_with_suffix(mr.VolBytes, ec8));
+ }
+
// bmicrosleep(15, 0); /* for debugging SIGHUP */
- Jmsg(jcr, msg_type, 0, _("%s %s %s (%s): %s\n"
+ Jmsg(jcr, msg_type, 0, _("%s %s %s (%s):\n"
" Build OS: %s %s %s\n"
" JobId: %d\n"
" Job: %s\n"
" SD Bytes Written: %s (%sB)\n"
" Rate: %.1f KB/s\n"
" Software Compression: %s\n"
-" VSS: %s\n"
+" Comm Line Compression: %s\n"
+"%s" /* Basefile info */
+" Snapshot/VSS: %s\n"
" Encryption: %s\n"
" Accurate: %s\n"
" Volume name(s): %s\n"
" Volume Session Id: %d\n"
" Volume Session Time: %d\n"
-" Last Volume Bytes: %s (%sB)\n"
+" Last Volume Bytes: %s\n"
" Non-fatal FD errors: %d\n"
" SD Errors: %d\n"
" FD termination status: %s\n"
" SD termination status: %s\n"
" Termination: %s\n\n"),
- BACULA, my_name, VERSION, LSMDATE, edt,
+ BACULA, my_name, VERSION, LSMDATE,
HOST_OS, DISTNAME, DISTVER,
jcr->jr.JobId,
jcr->jr.Job,
- level_to_str(jcr->get_JobLevel()), jcr->since,
+ level_to_str(jcr->getJobLevel()), jcr->since,
jcr->client->name(), cr.Uname,
jcr->fileset->name(), jcr->FSCreateTime,
jcr->pool->name(), jcr->pool_source,
edit_uint64_with_commas(jcr->SDJobBytes, ec5),
edit_uint64_with_suffix(jcr->SDJobBytes, ec6),
kbps,
- compress,
- jcr->VSS?_("yes"):_("no"),
+ data_compress,
+ comm_compress,
+ base_info.c_str(),
+ jcr->Snapshot?_("yes"):_("no"),
jcr->Encrypt?_("yes"):_("no"),
jcr->accurate?_("yes"):_("no"),
jcr->VolumeName,
jcr->VolSessionId,
jcr->VolSessionTime,
- edit_uint64_with_commas(mr.VolBytes, ec7),
- edit_uint64_with_suffix(mr.VolBytes, ec8),
+ vol_info.c_str(),
jcr->JobErrors,
jcr->SDErrors,
fd_term_msg,
sd_term_msg,
- term_msg);
+ term_msg.c_str());
Dmsg0(100, "Leave backup_cleanup()\n");
}
BPIPE *bpipe = NULL;
int got_pipe = 0;
POOLMEM *fname = get_pool_memory(PM_FNAME);
- fname = edit_job_codes(jcr, fname, jcr->job->WriteBootstrap, "");
+ fname = edit_job_codes(jcr, fname, jcr->job->WriteBootstrap, "",
+ job_code_callback_director);
VOL_PARAMS *VolParams = NULL;
int VolCount;
fd = bpipe ? bpipe->wfd : NULL;
} else {
/* ***FIXME*** handle BASE */
- fd = fopen(fname, jcr->get_JobLevel()==L_FULL?"w+b":"a+b");
+ fd = bfopen(fname, jcr->is_JobLevel(L_FULL)?"w+b":"a+b");
}
if (fd) {
VolCount = db_get_job_volume_parameters(jcr, jcr->db, jcr->JobId,
Jmsg(jcr, M_ERROR, 0, _("Could not get Job Volume Parameters to "
"update Bootstrap file. ERR=%s\n"), db_strerror(jcr->db));
if (jcr->SDJobFiles != 0) {
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ jcr->setJobStatus(JS_ErrorTerminated);
}
}
/* Start output with when and who wrote it */
bstrftimes(edt, sizeof(edt), time(NULL));
fprintf(fd, "# %s - %s - %s%s\n", edt, jcr->jr.Job,
- level_to_str(jcr->get_JobLevel()), jcr->since);
+ level_to_str(jcr->getJobLevel()), jcr->since);
for (int i=0; i < VolCount; i++) {
/* Write the record */
fprintf(fd, "Volume=\"%s\"\n", VolParams[i].VolumeName);
}
fprintf(fd, "VolSessionId=%u\n", jcr->VolSessionId);
fprintf(fd, "VolSessionTime=%u\n", jcr->VolSessionTime);
- fprintf(fd, "VolAddr=%s-%s\n",
+ fprintf(fd, "VolAddr=%s-%s\n",
edit_uint64(VolParams[i].StartAddr, ed1),
edit_uint64(VolParams[i].EndAddr, ed2));
fprintf(fd, "FileIndex=%d-%d\n", VolParams[i].FirstIndex,
berrno be;
Jmsg(jcr, M_ERROR, 0, _("Could not open WriteBootstrap file:\n"
"%s: ERR=%s\n"), fname, be.bstrerror());
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ jcr->setJobStatus(JS_ErrorTerminated);
}
free_pool_memory(fname);
}