static char rec_header[] = "rechdr %ld %ld %ld %ld %ld";
/* Forward referenced functions */
-static void print_ls_output(JCR *jcr, char *fname, char *lname, int type, struct stat *statp);
+#ifdef HAVE_LIBZ
+static char *zlib_strerror(int stat);
+#endif
#define RETRY 10 /* retry wait time */
*/
void do_restore(JCR *jcr)
{
- int wherelen;
BSOCK *sd;
- POOLMEM *fname; /* original file name */
- POOLMEM *ofile; /* output name with possible prefix */
- POOLMEM *lname; /* link name with possible prefix */
- POOLMEM *attribsEx; /* Extended attributes (Win32) */
int32_t stream;
uint32_t size;
- uint32_t VolSessionId, VolSessionTime, file_index;
- uint32_t record_file_index;
- struct stat statp;
- int extract = FALSE;
- int ofd = -1;
- int type, stat;
+ uint32_t VolSessionId, VolSessionTime;
+ int32_t file_index;
+ bool extract = false;
+ BFILE bfd;
+ int stat;
uint32_t total = 0; /* Job total but only 32 bits for debug */
char *wbuf; /* write buffer */
uint32_t wsize; /* write size */
uint64_t fileAddr = 0; /* file write address */
+ int non_support_data = 0;
+ int non_support_attr = 0;
+ int prog_name_msg = 0;
+ ATTR *attr;
- wherelen = strlen(jcr->where);
+ binit(&bfd);
sd = jcr->store_bsock;
set_jcr_job_status(jcr, JS_Running);
}
jcr->buf_size = sd->msglen;
- fname = get_pool_memory(PM_FNAME);
- ofile = get_pool_memory(PM_FNAME);
- lname = get_pool_memory(PM_FNAME);
- attribsEx = get_pool_memory(PM_FNAME);
+ attr = new_attr();
#ifdef HAVE_LIBZ
uint32_t compress_buf_size = jcr->buf_size + 12 + ((jcr->buf_size+999) / 1000) + 100;
* or c. Possibly MD5 or SHA1 record
* 3. Repeat step 1
*/
- while (bnet_recv(sd) >= 0 && !job_canceled(jcr)) {
+ while (bget_msg(sd) >= 0 && !job_canceled(jcr)) {
/*
* First we expect a Stream Record Header
*/
/*
* Now we expect the Stream Data
*/
- if (bnet_recv(sd) < 0) {
+ if (bget_msg(sd) < 0) {
Jmsg1(jcr, M_FATAL, 0, _("Data record error. ERR=%s\n"), bnet_strerror(sd));
goto bail_out;
}
Dmsg1(30, "Got stream data, len=%d\n", sd->msglen);
/* File Attributes stream */
- if (stream == STREAM_UNIX_ATTRIBUTES || stream == STREAM_WIN32_ATTRIBUTES) {
- char *ap, *lp, *fp, *apex;
- uint32_t LinkFI;
+ switch (stream) {
+ case STREAM_UNIX_ATTRIBUTES:
+ case STREAM_UNIX_ATTRIBUTES_EX:
Dmsg1(30, "Stream=Unix Attributes. extract=%d\n", extract);
/* If extracting, it was from previous stream, so
* close the output file.
*/
if (extract) {
- if (ofd < 0) {
+ if (!is_bopen(&bfd)) {
Jmsg0(jcr, M_ERROR, 0, _("Logic error output file should be open\n"));
}
- set_attributes(jcr, fname, ofile, lname, type, stream,
- &statp, attribsEx, &ofd);
- extract = FALSE;
+ set_attributes(jcr, attr, &bfd);
+ extract = false;
Dmsg0(30, "Stop extracting.\n");
}
- if ((int)sizeof_pool_memory(fname) < sd->msglen) {
- fname = realloc_pool_memory(fname, sd->msglen + 1);
- }
- if ((int)sizeof_pool_memory(ofile) < sd->msglen + wherelen + 1) {
- ofile = realloc_pool_memory(ofile, sd->msglen + wherelen + 1);
- }
- if ((int)sizeof_pool_memory(lname) < sd->msglen + wherelen + 1) {
- lname = realloc_pool_memory(lname, sd->msglen + wherelen + 1);
- }
- *fname = 0;
- *lname = 0;
-
- /*
- * An Attributes record consists of:
- * File_index
- * Type (FT_types)
- * Filename
- * Attributes
- * Link name (if file linked i.e. FT_LNK)
- * Extended attributes (Win32)
- *
- */
- Dmsg1(100, "Attr: %s\n", sd->msg);
- if (sscanf(sd->msg, "%d %d", &record_file_index, &type) != 2) {
- Jmsg(jcr, M_FATAL, 0, _("Error scanning attributes: %s\n"), sd->msg);
- Dmsg1(100, "\nError scanning attributes. %s\n", sd->msg);
+ if (!unpack_attributes_record(jcr, stream, sd->msg, attr)) {
goto bail_out;
}
- Dmsg2(100, "Got Attr: FilInx=%d type=%d\n", record_file_index, type);
- if (record_file_index != file_index) {
+ if (file_index != attr->file_index) {
Jmsg(jcr, M_FATAL, 0, _("Record header file index %ld not equal record index %ld\n"),
- file_index, record_file_index);
+ file_index, attr->file_index);
Dmsg0(100, "File index error\n");
goto bail_out;
}
- ap = sd->msg;
- while (*ap++ != ' ') /* skip record file index */
- ;
- while (*ap++ != ' ') /* skip type */
- ;
- /* Save filename and position to attributes */
- fp = fname;
- while (*ap != 0) {
- *fp++ = *ap++; /* copy filename to fname */
- }
- *fp = *ap++; /* terminate filename & point to attribs */
+
+ Dmsg3(200, "File %s\nattrib=%s\nattribsEx=%s\n", attr->fname,
+ attr->attr, attr->attrEx);
- /* Skip to Link name */
- if (type == FT_LNK || type == FT_LNKSAVED) {
- lp = ap;
- while (*lp++ != 0) {
- ;
- }
- } else {
- lp = "";
- }
+ attr->data_stream = decode_stat(attr->attr, &attr->statp, &attr->LinkFI);
- if (stream == STREAM_WIN32_ATTRIBUTES) {
- apex = ap; /* start at attributes */
- while (*apex++ != 0) { /* skip attributes */
- ;
+ if (!is_stream_supported(attr->data_stream)) {
+ if (!non_support_data++) {
+ Jmsg(jcr, M_ERROR, 0, _("%s stream not supported on this Client.\n"),
+ stream_to_ascii(attr->data_stream));
}
- while (*apex++ != 0) { /* skip link name */
- ;
- }
- pm_strcpy(&attribsEx, apex); /* make a copy */
- } else {
- *attribsEx = 0; /* no extended attributes */
+ continue;
}
- Dmsg3(200, "File %s\nattrib=%s\nattribsEx=%s\n", fname, ap, attribsEx);
-
- decode_stat(ap, &statp, &LinkFI);
- /*
- * Prepend the where directory so that the
- * files are put where the user wants.
- *
- * We do a little jig here to handle Win32 files with
- * a drive letter -- we simply strip the drive: from
- * every filename if a prefix is supplied.
- *
- */
- if (jcr->where[0] == 0) {
- strcpy(ofile, fname);
- strcpy(lname, lp);
- } else {
- char *fn;
- strcpy(ofile, jcr->where); /* copy prefix */
- if (win32_client && fname[1] == ':') {
- fn = fname+2; /* skip over drive: */
- } else {
- fn = fname; /* take whole name */
- }
- /* Ensure where is terminated with a slash */
- if (jcr->where[wherelen-1] != '/' && fn[0] != '/') {
- strcat(ofile, "/");
- }
- strcat(ofile, fn); /* copy rest of name */
- /*
- * Fixup link name -- add where only if requested
- * and if it is an absolute path
- */
- if (type == FT_LNKSAVED || type == FT_LNK) {
- int add_link;
- if (jcr->prefix_links && lp[0] == '/') { /* if absolute path */
- strcpy(lname, jcr->where);
- add_link = 1;
- } else {
- lname[0] = 0;
- add_link = 0;
- }
- if (win32_client && lp[1] == ':') {
- fn = lp+2; /* skip over drive: */
- } else {
- fn = lp; /* take whole name */
- }
- /* Ensure where is terminated with a slash */
- if (add_link && jcr->where[wherelen-1] != '/' && fn[0] != '/') {
- strcat(lname, "/");
- }
- strcat(lname, fn); /* copy rest of link */
- }
- }
+ build_attr_output_fnames(jcr, attr);
- Dmsg1(30, "Outfile=%s\n", ofile);
+ jcr->num_files_examined++;
- extract = FALSE;
- stat = create_file(jcr, fname, ofile, lname, type,
- stream, &statp, attribsEx, &ofd, jcr->replace);
+ Dmsg1(30, "Outfile=%s\n", attr->ofname);
+ extract = false;
+ stat = create_file(jcr, attr, &bfd, jcr->replace);
switch (stat) {
case CF_ERROR:
case CF_SKIP:
break;
case CF_EXTRACT:
- extract = TRUE;
+ extract = true;
P(jcr->mutex);
- pm_strcpy(&jcr->last_fname, ofile);
+ pm_strcpy(&jcr->last_fname, attr->ofname);
V(jcr->mutex);
- /* Fall-through wanted */
+ jcr->JobFiles++;
+ fileAddr = 0;
+ print_ls_output(jcr, attr);
+ /* Set attributes after file extracted */
+ break;
case CF_CREATED:
+ P(jcr->mutex);
+ pm_strcpy(&jcr->last_fname, attr->ofname);
+ V(jcr->mutex);
jcr->JobFiles++;
fileAddr = 0;
- print_ls_output(jcr, ofile, lname, type, &statp);
+ print_ls_output(jcr, attr);
+ /* set attributes now because file will not be extracted */
+ set_attributes(jcr, attr, &bfd);
break;
}
-
- jcr->num_files_examined++;
+ break;
/* Data stream */
- } else if (stream == STREAM_FILE_DATA || stream == STREAM_SPARSE_DATA) {
+ case STREAM_FILE_DATA:
+ case STREAM_SPARSE_DATA:
+ case STREAM_WIN32_DATA:
+
if (extract) {
if (stream == STREAM_SPARSE_DATA) {
ser_declare;
unser_uint64(faddr);
if (fileAddr != faddr) {
fileAddr = faddr;
- if (lseek(ofd, (off_t)fileAddr, SEEK_SET) < 0) {
+ if (blseek(&bfd, (off_t)fileAddr, SEEK_SET) < 0) {
Jmsg3(jcr, M_ERROR, 0, _("Seek to %s error on %s: ERR=%s\n"),
- edit_uint64(fileAddr, ec1), ofile, strerror(errno));
- goto bail_out;
+ edit_uint64(fileAddr, ec1), attr->ofname, berror(&bfd));
+ extract = false;
+ bclose(&bfd);
+ continue;
}
}
} else {
wsize = sd->msglen;
}
Dmsg2(30, "Write %u bytes, total before write=%u\n", wsize, total);
- if ((uint32_t)write(ofd, wbuf, wsize) != wsize) {
+ if ((uint32_t)bwrite(&bfd, wbuf, wsize) != wsize) {
Dmsg0(0, "===Write error===\n");
- Jmsg2(jcr, M_ERROR, 0, _("Write error on %s: %s\n"), ofile, strerror(errno));
- goto bail_out;
- }
+ Jmsg2(jcr, M_ERROR, 0, _("Write error on %s: ERR=%s\n"), attr->ofname, berror(&bfd));
+ extract = false;
+ bclose(&bfd);
+ continue;
+ }
total += wsize;
jcr->JobBytes += wsize;
+ jcr->ReadBytes += wsize;
fileAddr += wsize;
}
-
+ break;
+
/* GZIP data stream */
- } else if (stream == STREAM_GZIP_DATA || stream == STREAM_SPARSE_GZIP_DATA) {
+ case STREAM_GZIP_DATA:
+ case STREAM_SPARSE_GZIP_DATA:
+ case STREAM_WIN32_GZIP_DATA:
#ifdef HAVE_LIBZ
if (extract) {
- ser_declare;
uLong compress_len;
- uint64_t faddr;
- char ec1[50];
int stat;
if (stream == STREAM_SPARSE_GZIP_DATA) {
+ ser_declare;
+ uint64_t faddr;
+ char ec1[50];
wbuf = sd->msg + SPARSE_FADDR_SIZE;
wsize = sd->msglen - SPARSE_FADDR_SIZE;
ser_begin(sd->msg, SPARSE_FADDR_SIZE);
unser_uint64(faddr);
if (fileAddr != faddr) {
fileAddr = faddr;
- if (lseek(ofd, (off_t)fileAddr, SEEK_SET) < 0) {
+ if (blseek(&bfd, (off_t)fileAddr, SEEK_SET) < 0) {
Jmsg3(jcr, M_ERROR, 0, _("Seek to %s error on %s: ERR=%s\n"),
- edit_uint64(fileAddr, ec1), ofile, strerror(errno));
- goto bail_out;
+ edit_uint64(fileAddr, ec1), attr->ofname, berror(&bfd));
+ extract = false;
+ bclose(&bfd);
+ continue;
}
}
} else {
Dmsg2(100, "Comp_len=%d msglen=%d\n", compress_len, wsize);
if ((stat=uncompress((Byte *)jcr->compress_buf, &compress_len,
(const Byte *)wbuf, (uLong)wsize)) != Z_OK) {
- Jmsg(jcr, M_ERROR, 0, _("Uncompression error. ERR=%d\n"), stat);
- goto bail_out;
+ Jmsg(jcr, M_ERROR, 0, _("Uncompression error on file %s. ERR=%s\n"),
+ attr->ofname, zlib_strerror(stat));
+ extract = false;
+ bclose(&bfd);
+ continue;
}
Dmsg2(100, "Write uncompressed %d bytes, total before write=%d\n", compress_len, total);
- if ((uLong)write(ofd, jcr->compress_buf, compress_len) != compress_len) {
+ if ((uLong)bwrite(&bfd, jcr->compress_buf, compress_len) != compress_len) {
Dmsg0(0, "===Write error===\n");
- Jmsg2(jcr, M_ERROR, 0, "Write error on %s: %s\n", ofile, strerror(errno));
- goto bail_out;
+ Jmsg2(jcr, M_ERROR, 0, _("Write error on %s: %s\n"), attr->ofname, berror(&bfd));
+ extract = false;
+ bclose(&bfd);
+ continue;
}
total += compress_len;
jcr->JobBytes += compress_len;
+ jcr->ReadBytes += wsize;
fileAddr += compress_len;
}
#else
if (extract) {
- Jmsg(jcr, M_ERROR, 0, "GZIP data stream found, but GZIP not configured!\n");
- goto bail_out;
+ Jmsg(jcr, M_ERROR, 0, _("GZIP data stream found, but GZIP not configured!\n"));
+ extract = false;
+ bclose(&bfd);
+ continue;
}
#endif
- /* If extracting, wierd stream (not 1 or 2), close output file anyway */
- } else if (extract) {
- Dmsg1(30, "Found wierd stream %d\n", stream);
- if (ofd < 0) {
- Jmsg0(jcr, M_ERROR, 0, _("Logic error output file should be open\n"));
+ break;
+
+ case STREAM_MD5_SIGNATURE:
+ case STREAM_SHA1_SIGNATURE:
+ break;
+
+ case STREAM_PROGRAM_NAMES:
+ case STREAM_PROGRAM_DATA:
+ if (!prog_name_msg) {
+ Pmsg0(000, "Got Program Name or Data Stream. Ignored.\n");
+ prog_name_msg++;
}
- set_attributes(jcr, fname, ofile, lname, type, stream,
- &statp, attribsEx, &ofd);
- extract = FALSE;
- } else if (!(stream == STREAM_MD5_SIGNATURE || stream == STREAM_SHA1_SIGNATURE)) {
+ break;
+
+ default:
+ /* If extracting, wierd stream (not 1 or 2), close output file anyway */
+ if (extract) {
+ Dmsg1(30, "Found wierd stream %d\n", stream);
+ if (!is_bopen(&bfd)) {
+ Jmsg0(jcr, M_ERROR, 0, _("Logic error output file should be open but is not.\n"));
+ }
+ set_attributes(jcr, attr, &bfd);
+ extract = false;
+ }
+ Jmsg(jcr, M_ERROR, 0, _("Unknown stream=%d ignored. This shouldn't happen!\n"), stream);
Dmsg2(0, "None of above!!! stream=%d data=%s\n", stream,sd->msg);
- }
- }
+ break;
+ } /* end switch(stream) */
+
+ } /* end while get_msg() */
/* If output file is still open, it was the last one in the
* archive since we just hit an end of file, so close the file.
*/
- if (ofd >= 0) {
- set_attributes(jcr, fname, ofile, lname, type, stream,
- &statp, attribsEx, &ofd);
+ if (is_bopen(&bfd)) {
+ set_attributes(jcr, attr, &bfd);
}
set_jcr_job_status(jcr, JS_Terminated);
goto ok_out;
free(jcr->compress_buf);
jcr->compress_buf = NULL;
}
- free_pool_memory(fname);
- free_pool_memory(ofile);
- free_pool_memory(lname);
- free_pool_memory(attribsEx);
+ bclose(&bfd);
+ free_attr(attr);
Dmsg2(10, "End Do Restore. Files=%d Bytes=%" lld "\n", jcr->JobFiles,
jcr->JobBytes);
+ if (non_support_data > 1 || non_support_attr > 1) {
+ Jmsg(jcr, M_ERROR, 0, _("%d non-supported data streams and %d non-supported attrib streams ignored.\n"),
+ non_support_data, non_support_attr);
+ }
}
-extern char *getuser(uid_t uid);
-extern char *getgroup(gid_t gid);
-
+#ifdef HAVE_LIBZ
/*
- * Print an ls style message, also send INFO
+ * Convert ZLIB error code into an ASCII message
*/
-static void print_ls_output(JCR *jcr, char *fname, char *lname, int type, struct stat *statp)
+static char *zlib_strerror(int stat)
{
- char buf[2000];
- char ec1[30];
- char *p, *f;
- int n;
-
- p = encode_mode(statp->st_mode, buf);
- n = sprintf(p, " %2d ", (uint32_t)statp->st_nlink);
- p += n;
- n = sprintf(p, "%-8.8s %-8.8s", getuser(statp->st_uid), getgroup(statp->st_gid));
- p += n;
- n = sprintf(p, "%8.8s ", edit_uint64(statp->st_size, ec1));
- p += n;
- p = encode_time(statp->st_ctime, p);
- *p++ = ' ';
- *p++ = ' ';
- for (f=fname; *f && (p-buf) < (int)sizeof(buf)-10; ) {
- *p++ = *f++;
+ if (stat >= 0) {
+ return "None";
}
- if (type == FT_LNK) {
- *p++ = ' ';
- *p++ = '-';
- *p++ = '>';
- *p++ = ' ';
- /* Copy link name */
- for (f=lname; *f && (p-buf) < (int)sizeof(buf)-10; ) {
- *p++ = *f++;
- }
+ switch (stat) {
+ case Z_ERRNO:
+ return "Zlib errno";
+ case Z_STREAM_ERROR:
+ return "Zlib stream error";
+ case Z_DATA_ERROR:
+ return "Zlib data error";
+ case Z_MEM_ERROR:
+ return "Zlib memory error";
+ case Z_BUF_ERROR:
+ return "Zlib buffer error";
+ case Z_VERSION_ERROR:
+ return "Zlib version error";
+ default:
+ return "*none*";
}
- *p++ = '\n';
- *p = 0;
- Dmsg0(20, buf);
- Jmsg(jcr, M_RESTORED, 0, "%s", buf);
}
+#endif