/*
Bacula(R) - The Network Backup Solution
- Copyright (C) 2002-2012 Free Software Foundation Europe e.V.
+ Copyright (C) 2000-2017 Kern Sibbald
- The main author of Bacula is Kern Sibbald, with contributions from
- many others, a complete list can be found in the file AUTHORS.
- This program is Free Software; you can redistribute it and/or
- modify it under the terms of version three of the GNU Affero General Public
- License as published by the Free Software Foundation and included
- in the file LICENSE.
+ The original author of Bacula is Kern Sibbald, with contributions
+ from many others, a complete list can be found in the file AUTHORS.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ You may use this file and others of this release according to the
+ license defined in the LICENSE file, which includes the Affero General
+ Public License, v3.0 ("AGPLv3") and some additional permissions and
+ terms pursuant to its AGPLv3 Section 7.
- You should have received a copy of the GNU Affero General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA.
+ This notice must be preserved when any source code is
+ conveyed and/or propagated.
Bacula(R) is a registered trademark of Kern Sibbald.
- The licensor of Bacula is the Free Software Foundation Europe
- (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
- Switzerland, email:ftf@fsfeurope.org.
*/
/*
* Routines to acquire and release a device for read/write
*
- * Kern Sibbald, August MMII
- *
+ * Written by Kern Sibbald, August MMII
*/
#include "bacula.h" /* pull in global headers */
#include "stored.h" /* pull in Storage Deamon headers */
+static int const rdbglvl = 100;
+
/* Forward referenced functions */
-static void attach_dcr_to_dev(DCR *dcr);
-static void detach_dcr_from_dev(DCR *dcr);
static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol);
/*********************************************************************
- * Acquire device for reading.
- * The drive should have previously been reserved by calling
+ * Acquire device for reading.
+ * The drive should have previously been reserved by calling
* reserve_device_for_read(). We read the Volume label from the block and
* leave the block pointers just after the label.
*
- * Returns: NULL if failed for any reason
- * dcr if successful
+ * Returns: false if failed for any reason
+ * true if successful
*/
bool acquire_device_for_read(DCR *dcr)
{
- DEVICE *dev = dcr->dev;
+ DEVICE *dev;
JCR *jcr = dcr->jcr;
bool ok = false;
bool tape_previously_mounted;
int i;
int vol_label_status;
int retry = 0;
-
- P(dev->read_acquire_mutex);
- Dmsg2(950, "dcr=%p dev=%p\n", dcr, dcr->dev);
- Dmsg2(950, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
+
+ Enter(rdbglvl);
+ dev = dcr->dev;
+ ASSERT2(!dev->adata, "Called with adata dev. Wrong!");
+ dev->Lock_read_acquire();
+ Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
+ Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->dblock(BST_DOING_ACQUIRE);
if (dev->num_writers > 0) {
- Jmsg2(jcr, M_FATAL, 0, _("Acquire read: num_writers=%d not zero. Job %d canceled.\n"),
+ Jmsg2(jcr, M_FATAL, 0, _("Acquire read: num_writers=%d not zero. Job %d canceled.\n"),
dev->num_writers, jcr->JobId);
goto get_out;
}
vol = jcr->VolList;
if (!vol) {
char ed1[50];
- Jmsg(jcr, M_FATAL, 0, _("No volumes specified for reading. Job %s canceled.\n"),
+ Jmsg(jcr, M_FATAL, 0, _("No volumes specified for reading. Job %s canceled.\n"),
edit_int64(jcr->JobId, ed1));
goto get_out;
}
if (!vol) {
Jmsg(jcr, M_FATAL, 0, _("Logic error: no next volume to read. Numvol=%d Curvol=%d\n"),
jcr->NumReadVolumes, jcr->CurReadVolume);
- goto get_out; /* should not happen */
+ goto get_out; /* should not happen */
}
set_dcr_from_vol(dcr, vol);
goto get_out;
}
- Dmsg2(100, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
-
+ Dmsg2(rdbglvl, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
+
/*
* If the MediaType requested for this volume is not the
* same as the current drive, we attempt to find the same
* them such as the block pointer (size may change), but we do
* not release the dcr.
*/
- Dmsg2(50, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
+ Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
if (dcr->media_type[0] && strcmp(dcr->media_type, dev->device->media_type) != 0) {
RCTX rctx;
DIRSTORE *store;
int stat;
- Jmsg3(jcr, M_INFO, 0, _("Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
- " device=%s\n"),
- dcr->media_type, dev->device->media_type, dev->print_name());
- Dmsg3(50, "Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
- " device=%s\n",
- dcr->media_type, dev->device->media_type, dev->print_name());
+ Jmsg4(jcr, M_INFO, 0, _("Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
+ " %s device=%s\n"),
+ dcr->media_type, dev->device->media_type, dev->print_type(),
+ dev->print_name());
+ Dmsg4(rdbglvl, "Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
+ " %s device=%s\n",
+ dcr->media_type, dev->device->media_type,
+ dev->print_type(), dev->print_name());
generate_plugin_event(jcr, bsdEventDeviceClose, dcr);
rctx.device_name = vol->device;
store = new DIRSTORE;
memset(store, 0, sizeof(DIRSTORE));
- store->name[0] = 0; /* No dir name */
+ store->name[0] = 0; /* No storage name */
bstrncpy(store->media_type, vol->MediaType, sizeof(store->media_type));
bstrncpy(store->pool_name, dcr->pool_name, sizeof(store->pool_name));
bstrncpy(store->pool_type, dcr->pool_type, sizeof(store->pool_type));
store->append = false;
rctx.store = store;
clean_device(dcr); /* clean up the dcr */
-
+
/*
* Search for a new device
*/
* Switching devices, so acquire lock on new device,
* then release the old one.
*/
- P(dcr->dev->read_acquire_mutex);
- V(dev->read_acquire_mutex);
+ dcr->dev->Lock_read_acquire(); /* lock new one */
+ dev->Unlock_read_acquire(); /* release old one */
dev = dcr->dev; /* get new device pointer */
- dev->dblock(BST_DOING_ACQUIRE);
+ dev->dblock(BST_DOING_ACQUIRE);
dcr->VolumeName[0] = 0;
- Jmsg(jcr, M_INFO, 0, _("Media Type change. New read device %s chosen.\n"),
- dev->print_name());
- Dmsg1(50, "Media Type change. New read device %s chosen.\n", dev->print_name());
+ Jmsg(jcr, M_INFO, 0, _("Media Type change. New read %s device %s chosen.\n"),
+ dev->print_type(), dev->print_name());
+ Dmsg2(50, "Media Type change. New read %s device %s chosen.\n",
+ dev->print_type(), dev->print_name());
if (generate_plugin_event(jcr, bsdEventDeviceOpen, dcr) != bRC_OK) {
Jmsg(jcr, M_FATAL, 0, _("generate_plugin_event(bsdEventDeviceOpen) Failed\n"));
goto get_out;
dcr->setVolCatName(vol->VolumeName);
bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
dcr->VolCatInfo.Slot = vol->Slot;
- dcr->VolCatInfo.InChanger = vol->Slot > 0;
+ dcr->VolCatInfo.InChanger = vol->Slot > 0;
bstrncpy(dcr->pool_name, store->pool_name, sizeof(dcr->pool_name));
bstrncpy(dcr->pool_type, store->pool_type, sizeof(dcr->pool_type));
} else {
/* error */
Jmsg1(jcr, M_FATAL, 0, _("No suitable device found to read Volume \"%s\"\n"),
vol->VolumeName);
- Dmsg1(50, "No suitable device found to read Volume \"%s\"\n", vol->VolumeName);
+ Dmsg1(rdbglvl, "No suitable device found to read Volume \"%s\"\n", vol->VolumeName);
goto get_out;
}
}
- Dmsg2(400, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
+ Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->clear_unload();
if (dev->vol && dev->vol->is_swapping()) {
dev->vol->set_slot(vol->Slot);
- Dmsg3(100, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
+ Dmsg3(rdbglvl, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
dev->vol->vol_name, dev->print_name());
}
dev->is_labeled();
// tape_initially_mounted = tape_previously_mounted;
- /* Volume info is always needed because of VolParts */
- Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
- if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
- Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
+ /* Volume info is always needed because of VolType */
+ Dmsg1(rdbglvl, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
+ if (!dir_get_volume_info(dcr, dcr->VolumeName, GET_VOL_INFO_FOR_READ)) {
+ Dmsg2(rdbglvl, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
dev->set_load(); /* set to load volume */
-
+
for ( ;; ) {
/* If not polling limit retries */
if (!dev->poll && retry++ > 10) {
}
dcr->do_unload();
- dcr->do_swapping(false/*!is_writing*/);
- dcr->do_load(false /*!is_writing*/);
+ dcr->do_swapping(SD_READ);
+ dcr->do_load(SD_READ);
set_dcr_from_vol(dcr, vol); /* refresh dcr with desired volume info */
/*
* reading. If it is a file, it opens it.
* If it is a tape, it checks the volume name
*/
- Dmsg1(100, "bstored: open vol=%s\n", dcr->VolumeName);
- if (!dev->open(dcr, OPEN_READ_ONLY)) {
+ Dmsg1(rdbglvl, "open vol=%s\n", dcr->VolumeName);
+ if (!dev->open_device(dcr, OPEN_READ_ONLY)) {
if (!dev->poll) {
- Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
- dev->print_name(), dcr->VolumeName, dev->bstrerror());
+ Jmsg4(jcr, M_WARNING, 0, _("Read open %s device %s Volume \"%s\" failed: ERR=%s\n"),
+ dev->print_type(), dev->print_name(), dcr->VolumeName, dev->bstrerror());
}
goto default_path;
}
- Dmsg1(50, "opened dev %s OK\n", dev->print_name());
-
+ Dmsg1(rdbglvl, "opened dev %s OK\n", dev->print_name());
+
/* Read Volume Label */
- Dmsg0(50, "calling read-vol-label\n");
- vol_label_status = read_dev_volume_label(dcr);
+ Dmsg0(rdbglvl, "calling read-vol-label\n");
+ vol_label_status = dev->read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
- Dmsg0(50, "Got correct volume.\n");
+ Dmsg1(rdbglvl, "Got correct volume. VOL_OK: %s\n", dcr->VolCatInfo.VolCatName);
ok = true;
dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
break; /* got it */
case VOL_IO_ERROR:
- Dmsg0(50, "IO Error\n");
+ Dmsg0(rdbglvl, "IO Error\n");
/*
- * Send error message generated by read_dev_volume_label()
+ * Send error message generated by dev->read_dev_volume_label()
* only we really had a tape mounted. This supresses superfluous
* error messages when nothing is mounted.
*/
Jmsg(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
goto default_path;
+ case VOL_TYPE_ERROR:
+ Jmsg(jcr, M_FATAL, 0, "%s", jcr->errmsg);
+ goto get_out;
case VOL_NAME_ERROR:
- Dmsg3(50, "Vol name=%s want=%s drv=%s.\n", dev->VolHdr.VolumeName,
+ Dmsg3(rdbglvl, "Vol name=%s want=%s drv=%s.\n", dev->VolHdr.VolumeName,
dcr->VolumeName, dev->print_name());
if (dev->is_volume_to_unload()) {
goto default_path;
dev->set_unload(); /* force unload of unwanted tape */
if (!unload_autochanger(dcr, -1)) {
/* at least free the device so we can re-open with correct volume */
- dev->close();
+ dev->close(dcr);
free_volume(dev);
}
dev->set_load();
default:
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
default_path:
- Dmsg0(50, "default path\n");
+ Dmsg0(rdbglvl, "default path\n");
tape_previously_mounted = true;
-
+
/*
* If the device requires mount, close it, so the device can be ejected.
*/
if (dev->requires_mount()) {
- dev->close();
+ dev->close(dcr);
free_volume(dev);
}
-
+
/* Call autochanger only once unless ask_sysop called */
if (try_autochanger) {
int stat;
- Dmsg2(200, "calling autoload Vol=%s Slot=%d\n",
+ Dmsg2(rdbglvl, "calling autoload Vol=%s Slot=%d\n",
dcr->VolumeName, dcr->VolCatInfo.Slot);
- stat = autoload_device(dcr, 0, NULL);
+ stat = autoload_device(dcr, SD_READ, NULL);
if (stat > 0) {
try_autochanger = false;
continue; /* try reading volume mounted */
}
}
-
+
/* Mount a specific volume and no other */
- Dmsg0(200, "calling dir_ask_sysop\n");
- if (!dir_ask_sysop_to_mount_volume(dcr, ST_READ)) {
+ Dmsg0(rdbglvl, "calling dir_ask_sysop\n");
+ if (!dir_ask_sysop_to_mount_volume(dcr, SD_READ)) {
goto get_out; /* error return */
}
- /* Volume info is always needed because of VolParts */
+ /* Volume info is always needed because of VolType */
Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
- if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
- Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
+ if (!dir_get_volume_info(dcr, dcr->VolumeName, GET_VOL_INFO_FOR_READ)) {
+ Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
} /* end for loop */
if (!ok) {
- Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s for reading.\n"),
- dev->print_name());
+ Jmsg2(jcr, M_FATAL, 0, _("Too many errors trying to mount %s device %s for reading.\n"),
+ dev->print_type(), dev->print_name());
goto get_out;
}
dev->clear_append();
dev->set_read();
jcr->sendJobStatus(JS_Running);
- Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on device %s.\n"),
- dcr->VolumeName, dev->print_name());
+ Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on %s device %s.\n"),
+ dcr->VolumeName, dev->print_type(), dev->print_name());
get_out:
- dev->dlock();
+ dev->Lock();
/* If failed and not writing plugin close device */
- if (!ok && dev->num_writers == 0) {
+ if (!ok && dev->num_writers == 0 && dev->num_reserved() == 0) {
generate_plugin_event(jcr, bsdEventDeviceClose, dcr);
}
- dcr->clear_reserved();
- /*
- * Normally we are blocked, but in at least one error case above
+ /*
+ * Normally we are blocked, but in at least one error case above
* we are not blocked because we unsuccessfully tried changing
- * devices.
+ * devices.
*/
if (dev->is_blocked()) {
dev->dunblock(DEV_LOCKED);
} else {
- dev->dunlock(); /* dunblock() unlock the device too */
+ dev->Unlock(); /* dunblock() unlock the device too */
}
- Dmsg2(950, "dcr=%p dev=%p\n", dcr, dcr->dev);
- Dmsg2(950, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
- V(dev->read_acquire_mutex);
+ Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
+ Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
+ dev->Unlock_read_acquire();
+ Leave(rdbglvl);
return ok;
}
bool ok = false;
bool have_vol = false;
+ Enter(200);
+ dcr->set_ameta();
init_device_wait_timers(dcr);
- P(dev->acquire_mutex); /* only one job at a time */
- dev->dlock();
- Dmsg1(100, "acquire_append device is %s\n", dev->is_tape()?"tape":
- (dev->is_dvd()?"DVD":"disk"));
-
-
+ dev->Lock_acquire(); /* only one job at a time */
+ dev->Lock();
+ Dmsg1(100, "acquire_append device is %s\n", dev->print_type());
/*
* With the reservation system, this should not happen
*/
if (dev->can_read()) {
- Jmsg1(jcr, M_FATAL, 0, _("Want to append, but device %s is busy reading.\n"), dev->print_name());
- Dmsg1(200, "Want to append but device %s is busy reading.\n", dev->print_name());
+ Mmsg2(jcr->errmsg, "Want to append but %s device %s is busy reading.\n",
+ dev->print_type(), dev->print_name());
+ Jmsg(jcr, M_FATAL, 0, jcr->errmsg);
+ Dmsg0(50, jcr->errmsg);
goto get_out;
}
}
if (!have_vol) {
- dev->r_dlock(true);
+ dev->rLock(true);
block_device(dev, BST_DOING_ACQUIRE);
- dev->dunlock();
+ dev->Unlock();
Dmsg1(190, "jid=%u Do mount_next_write_vol\n", (uint32_t)jcr->JobId);
if (!dcr->mount_next_write_volume()) {
if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
- Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
- dev->print_name());
- Dmsg1(200, "Could not ready device %s for append.\n",
- dev->print_name());
+ Mmsg2(jcr->errmsg, _("Could not ready %s device %s for append.\n"),
+ dev->print_type(), dev->print_name());
+ Jmsg(jcr, M_FATAL, 0, jcr->errmsg);
+ Dmsg0(50, jcr->errmsg);
}
- dev->dlock();
+ dev->Lock();
unblock_device(dev);
goto get_out;
}
Dmsg2(190, "Output pos=%u:%u\n", dcr->dev->file, dcr->dev->block_num);
- dev->dlock();
+ dev->Lock();
unblock_device(dev);
}
if (generate_plugin_event(jcr, bsdEventDeviceOpen, dcr) != bRC_OK) {
- Jmsg(jcr, M_FATAL, 0, _("generate_plugin_event(bsdEventDeviceOpen) Failed\n"));
+ Mmsg0(jcr->errmsg, _("generate_plugin_event(bsdEventDeviceOpen) Failed\n"));
+ Jmsg(jcr, M_FATAL, 0, jcr->errmsg);
+ Dmsg0(50, jcr->errmsg);
goto get_out;
}
jcr->NumWriteVolumes = 1;
}
dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
- Dmsg4(100, "=== nwriters=%d nres=%d vcatjob=%d dev=%s\n",
- dev->num_writers, dev->num_reserved(), dev->VolCatInfo.VolCatJobs,
+ Dmsg4(100, "=== nwriters=%d nres=%d vcatjob=%d dev=%s\n",
+ dev->num_writers, dev->num_reserved(), dev->VolCatInfo.VolCatJobs,
dev->print_name());
- dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
- ok = true;
+ ok = dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
get_out:
/* Don't plugin close here, we might have multiple writers */
dcr->clear_reserved();
- dev->dunlock();
- V(dev->acquire_mutex);
+ dev->Unlock();
+ dev->Unlock_acquire();
+ Leave(200);
return ok ? dcr : NULL;
}
DEVICE *dev = dcr->dev;
bool ok = true;
char tbuf[100];
- int was_blocked = BST_NOT_BLOCKED;
+ int was_blocked;
+
- dev->dlock();
+ dev->Lock();
+ was_blocked = BST_NOT_BLOCKED;
if (!dev->is_blocked()) {
block_device(dev, BST_RELEASING);
} else {
volume_unused(dcr);
}
} else if (dev->num_writers > 0) {
- /*
+ /*
* Note if WEOT is set, we are at the end of the tape
* and may not be positioned correctly, so the
* job_media_record and update_vol_info have already been
dev->num_writers--;
Dmsg1(100, "There are %d writers in release_device\n", dev->num_writers);
if (dev->is_labeled()) {
- Dmsg2(200, "dir_create_jobmedia. Release vol=%s dev=%s\n",
- dev->getVolCatName(), dev->print_name());
+ if (!dev->at_weot()) {
+ Dmsg2(200, "dir_create_jobmedia. Release vol=%s dev=%s\n",
+ dev->getVolCatName(), dev->print_name());
+ }
if (!dev->at_weot() && !dir_create_jobmedia_record(dcr)) {
Jmsg2(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
dcr->getVolCatName(), jcr->Job);
}
/* If no more writers, and no errors, and wrote something, write an EOF */
if (!dev->num_writers && dev->can_write() && dev->block_num > 0) {
- dev->weof(1);
+ dev->weof(dcr, 1);
write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
}
if (!dev->at_weot()) {
- dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
+ dev->VolCatInfo.VolCatFiles = dev->get_file(); /* set number of files */
/* Note! do volume update before close, which zaps VolCatInfo */
dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
- Dmsg2(200, "dir_update_vol_info. Release vol=%s dev=%s\n",
+ Dmsg2(200, "dir_update_vol_info. Release vol=%s dev=%s\n",
dev->getVolCatName(), dev->print_name());
}
if (dev->num_writers == 0) { /* if not being used */
volume_unused(dcr); /* we obviously are not using the volume */
+ generate_plugin_event(jcr, bsdEventDeviceClose, dcr);
}
}
} else {
- /*
+ /*
* If we reach here, it is most likely because the job
* has failed, since the device is not in read mode and
* there are no writers. It was probably reserved.
*/
volume_unused(dcr);
+ generate_plugin_event(jcr, bsdEventDeviceClose, dcr);
}
Dmsg3(100, "%d writers, %d reserve, dev=%s\n", dev->num_writers, dev->num_reserved(),
dev->print_name());
/* If no writers, close if file or !CAP_ALWAYS_OPEN */
if (dev->num_writers == 0 && (!dev->is_tape() || !dev->has_cap(CAP_ALWAYSOPEN))) {
generate_plugin_event(jcr, bsdEventDeviceClose, dcr);
- dvd_remove_empty_part(dcr); /* get rid of any empty spool part */
- dev->close();
+ if (!dev->close(dcr) && dev->errmsg[0]) {
+ Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
+ }
free_volume(dev);
}
+ unlock_volumes();
- /* Fire off Alert command and include any output */
- if (!job_canceled(jcr) && dcr->device->alert_command) {
- POOLMEM *alert;
- int status = 1;
- BPIPE *bpipe;
- char line[MAXSTRING];
- alert = get_pool_memory(PM_FNAME);
- alert = edit_device_codes(dcr, alert, dcr->device->alert_command, "");
- /* Wait maximum 5 minutes */
- bpipe = open_bpipe(alert, 60 * 5, "r");
- if (bpipe) {
- while (fgets(line, sizeof(line), bpipe->rfd)) {
- Jmsg(jcr, M_ALERT, 0, _("Alert: %s"), line);
- }
- status = close_bpipe(bpipe);
- } else {
- status = errno;
- }
- if (status != 0) {
- berrno be;
- Jmsg(jcr, M_ALERT, 0, _("3997 Bad alert command: %s: ERR=%s.\n"),
- alert, be.bstrerror(status));
- }
+ /* Do new tape alert code */
+ dev->get_tape_alerts(dcr);
+ /* alert_callback is in tape_alert.c -- show only most recent (last) alert */
+ dev->show_tape_alerts(dcr, list_long, list_last, alert_callback);
- Dmsg1(400, "alert status=%d\n", status);
- free_pool_memory(alert);
- }
pthread_cond_broadcast(&dev->wait_next_vol);
- Dmsg2(100, "JobId=%u broadcast wait_device_release at %s\n",
+ Dmsg2(100, "JobId=%u broadcast wait_device_release at %s\n",
(uint32_t)jcr->JobId, bstrftimes(tbuf, sizeof(tbuf), (utime_t)time(NULL)));
pthread_cond_broadcast(&wait_device_release);
- unlock_volumes();
+
/*
* If we are the thread that blocked the device, then unblock it
} else {
/* Otherwise, reset the prior block status and unlock */
dev->set_blocked(was_blocked);
- dev->dunlock();
+ dev->Unlock();
}
+ dev->end_of_job(dcr);
+
if (dcr->keep_dcr) {
- detach_dcr_from_dev(dcr);
+ dev->detach_dcr_from_dev(dcr);
} else {
free_dcr(dcr);
}
- Dmsg2(100, "===== Device %s released by JobId=%u\n", dev->print_name(),
+ Dmsg2(100, "Device %s released by JobId=%u\n", dev->print_name(),
(uint32_t)jcr->JobId);
return ok;
}
/*
* Create a new Device Control Record and attach
* it to the device (if this is a real job).
- * Note, this has been updated so that it can be called first
+ * Note, this has been updated so that it can be called first
* without a DEVICE, then a second or third time with a DEVICE,
* and each time, it should cleanup and point to the new device.
* This should facilitate switching devices.
* this dcr in the right place
*
*/
-DCR *new_dcr(JCR *jcr, DCR *dcr, DEVICE *dev)
+DCR *new_dcr(JCR *jcr, DCR *dcr, DEVICE *dev, bool writing)
{
+ DEVICE *odev;
if (!dcr) {
- int errstat;
dcr = (DCR *)malloc(sizeof(DCR));
memset(dcr, 0, sizeof(DCR));
dcr->tid = pthread_self();
+ dcr->uploads = New(alist(100, false));
+ dcr->downloads = New(alist(100, false));
dcr->spool_fd = -1;
- if ((errstat = pthread_mutex_init(&dcr->m_mutex, NULL)) != 0) {
- berrno be;
- dev->dev_errno = errstat;
- Mmsg1(dev->errmsg, _("Unable to init mutex: ERR=%s\n"), be.bstrerror(errstat));
- Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
- }
}
dcr->jcr = jcr; /* point back to jcr */
+ odev = dcr->dev;
+ if (dcr->attached_to_dev && odev) {
+ Dmsg2(100, "Detach 0x%x from olddev %s\n", dcr, odev->print_name());
+ odev->detach_dcr_from_dev(dcr);
+ }
+ ASSERT2(!dcr->attached_to_dev, "DCR is attached. Wrong!");
/* Set device information, possibly change device */
if (dev) {
- if (dcr->block) {
- free_block(dcr->block);
- }
- dcr->block = new_block(dev);
+ ASSERT2(!dev->adata, "Called with adata dev. Wrong!");
+ dev->free_dcr_blocks(dcr);
+ dev->new_dcr_blocks(dcr);
if (dcr->rec) {
free_record(dcr->rec);
}
dcr->rec = new_record();
- if (dcr->attached_to_dev) {
- detach_dcr_from_dev(dcr);
- }
/* Use job spoolsize prior to device spoolsize */
- if (jcr->spool_size) {
+ if (jcr && jcr->spool_size) {
dcr->max_job_spool_size = jcr->spool_size;
} else {
dcr->max_job_spool_size = dev->device->max_job_spool_size;
}
dcr->device = dev->device;
- dcr->dev = dev;
- attach_dcr_to_dev(dcr);
+ dcr->set_dev(dev);
+ Dmsg2(100, "Attach 0x%x to dev %s\n", dcr, dev->print_name());
+ dev->attach_dcr_to_dev(dcr);
+ }
+ if (writing) {
+ dcr->set_writing();
+ } else {
+ dcr->clear_writing();
}
return dcr;
}
}
#endif
-static void attach_dcr_to_dev(DCR *dcr)
+void DEVICE::attach_dcr_to_dev(DCR *dcr)
{
- DEVICE *dev;
- JCR *jcr;
+ JCR *jcr = dcr->jcr;
- P(dcr->m_mutex);
- dev = dcr->dev;
+ Lock_dcrs();
jcr = dcr->jcr;
if (jcr) Dmsg1(500, "JobId=%u enter attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
/* ***FIXME*** return error if dev not initiated */
- if (!dcr->attached_to_dev && dev->initiated && jcr && jcr->getJobType() != JT_SYSTEM) {
- dev->dlock();
- dev->attached_dcrs->append(dcr); /* attach dcr to device */
- dev->dunlock();
+ if (!dcr->attached_to_dev && initiated && jcr && jcr->getJobType() != JT_SYSTEM) {
+ ASSERT2(!adata, "Called on adata dev. Wrong!");
+ Dmsg4(200, "Attach Jid=%d dcr=%p size=%d dev=%s\n", (uint32_t)jcr->JobId,
+ dcr, attached_dcrs->size(), print_name());
+ attached_dcrs->append(dcr); /* attach dcr to device */
dcr->attached_to_dev = true;
- Dmsg1(500, "JobId=%u attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
}
- V(dcr->m_mutex);
+ Unlock_dcrs();
}
-/*
- * DCR is locked before calling this routine
+/*
+ * Note!! Do not enter with dev->Lock() since unreserve_device()
+ * is going to lock it too.
*/
-static void locked_detach_dcr_from_dev(DCR *dcr)
+void DEVICE::detach_dcr_from_dev(DCR *dcr)
{
- DEVICE *dev = dcr->dev;
Dmsg0(500, "Enter detach_dcr_from_dev\n"); /* jcr is NULL in some cases */
+ Lock();
+ Lock_dcrs();
/* Detach this dcr only if attached */
- if (dcr->attached_to_dev && dev) {
- dcr->unreserve_device();
- dev->dlock();
- dcr->dev->attached_dcrs->remove(dcr); /* detach dcr from device */
-// remove_dcr_from_dcrs(dcr); /* remove dcr from jcr list */
- dev->dunlock();
+ if (dcr->attached_to_dev) {
+ ASSERT2(!adata, "Called with adata dev. Wrong!");
+ dcr->unreserve_device(true);
+ Dmsg4(200, "Detach Jid=%d dcr=%p size=%d to dev=%s\n", (uint32_t)dcr->jcr->JobId,
+ dcr, attached_dcrs->size(), print_name());
+ dcr->attached_to_dev = false;
+ if (attached_dcrs->size()) {
+ attached_dcrs->remove(dcr); /* detach dcr from device */
+ }
+ }
+ /* Check if someone accidentally left a drive reserved, and clear it */
+ if (attached_dcrs->size() == 0 && num_reserved() > 0) {
+ Pmsg3(000, "Warning!!! Detach %s DCR: dcrs=0 reserved=%d setting reserved==0. dev=%s\n",
+ dcr->is_writing() ? "writing" : "reading", num_reserved(), print_name());
+ m_num_reserved = 0;
}
dcr->attached_to_dev = false;
-}
-
-
-static void detach_dcr_from_dev(DCR *dcr)
-{
- P(dcr->m_mutex);
- locked_detach_dcr_from_dev(dcr);
- V(dcr->m_mutex);
+ Unlock_dcrs();
+ Unlock();
}
/*
{
JCR *jcr;
- P(dcr->m_mutex);
jcr = dcr->jcr;
- locked_detach_dcr_from_dev(dcr);
+ if (dcr->dev) {
+ dcr->dev->detach_dcr_from_dev(dcr);
+ }
- if (dcr->block) {
+ if (dcr->dev) {
+ dcr->dev->free_dcr_blocks(dcr);
+ } else {
+ dcr->ameta_block = NULL;
free_block(dcr->block);
}
if (dcr->rec) {
if (jcr && jcr->read_dcr == dcr) {
jcr->read_dcr = NULL;
}
- V(dcr->m_mutex);
- pthread_mutex_destroy(&dcr->m_mutex);
+ delete dcr->uploads;
+ delete dcr->downloads;
free(dcr);
}
static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol)
{
- /*
- * Note, if we want to be able to work from a .bsr file only
+ /*
+ * Note, if we want to be able to work from a .bsr file only
* for disaster recovery, we must "simulate" reading the catalog
*/
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
dcr->setVolCatName(vol->VolumeName);
bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
dcr->VolCatInfo.Slot = vol->Slot;
- dcr->VolCatInfo.InChanger = vol->Slot > 0;
+ dcr->VolCatInfo.InChanger = vol->Slot > 0;
+ dcr->CurrentVol = vol; /* Keep VOL_LIST pointer (freed at the end of the job) */
}
projects / bacula / bacula / blobdiff