Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of Kern Sibbald.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
/* Forward referenced functions */
static void attach_dcr_to_dev(DCR *dcr);
-static bool is_tape_position_ok(JCR *jcr, DEVICE *dev);
+static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol);
/*********************************************************************
jcr->NumReadVolumes, jcr->CurReadVolume);
goto get_out; /* should not happen */
}
- bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
- bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
- dcr->VolCatInfo.Slot = vol->Slot;
+ set_dcr_from_vol(dcr, vol);
+
+ Dmsg2(100, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
/*
* If the MediaType requested for this volume is not the
Dmsg1(50, "Media Type change. New device %s chosen.\n", dev->print_name());
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
+ bstrncpy(dcr->VolCatInfo.VolCatName, vol->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
dcr->VolCatInfo.Slot = vol->Slot;
+ dcr->VolCatInfo.InChanger = vol->Slot > 0;
bstrncpy(dcr->pool_name, store->pool_name, sizeof(dcr->pool_name));
bstrncpy(dcr->pool_type, store->pool_type, sizeof(dcr->pool_type));
} else {
}
}
+ dev->clear_unload();
+
+ if (dev->vol && dev->vol->is_swapping()) {
+ dev->vol->set_slot(vol->Slot);
+ Dmsg3(100, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
+ dev->vol->vol_name, dev->print_name());
+ }
init_device_wait_timers(dcr);
/* Volume info is always needed because of VolParts */
- Dmsg0(200, "dir_get_volume_info\n");
+ Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
+ Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
+ dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
}
+ dev->set_load(); /* set to load volume */
for ( ;; ) {
/* If not polling limit retries */
goto get_out; /* error return */
}
- autoload_device(dcr, 0, NULL);
+ dcr->do_unload();
+ dcr->do_swapping(false/*!is_writing*/);
+ dcr->do_load(false /*!is_writing*/);
+ set_dcr_from_vol(dcr, vol); /* refresh dcr with desired volume info */
/*
* This code ensures that the device is ready for
*/
Dmsg1(100, "bstored: open vol=%s\n", dcr->VolumeName);
if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
- Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
- dev->print_name(), dcr->VolumeName, dev->bstrerror());
+ if (!dev->poll) {
+ Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
+ dev->print_name(), dcr->VolumeName, dev->bstrerror());
+ }
goto default_path;
}
Dmsg1(50, "opened dev %s OK\n", dev->print_name());
vol_label_status = read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
+ Dmsg0(50, "Got correct volume.\n");
ok = true;
- memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
+ dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
break; /* got it */
case VOL_IO_ERROR:
+ Dmsg0(50, "IO Error\n");
/*
* Send error message generated by read_dev_volume_label()
* only we really had a tape mounted. This supresses superfluous
}
goto default_path;
case VOL_NAME_ERROR:
- if (tape_initially_mounted) {
- tape_initially_mounted = false;
+ Dmsg0(50, "Vol name error.\n");
+ if (dev->is_volume_to_unload()) {
goto default_path;
}
- /* If polling and got a previous bad name, ignore it */
- if (dev->poll && strcmp(dev->BadVolName, dev->VolHdr.VolumeName) == 0) {
- goto default_path;
- } else {
- bstrncpy(dev->BadVolName, dev->VolHdr.VolumeName, sizeof(dev->BadVolName));
+ dev->set_unload(); /* force unload of unwanted tape */
+ if (!unload_autochanger(dcr, -1)) {
+ /* at least free the device so we can re-open with correct volume */
+ dev->close();
}
+ dev->set_load();
/* Fall through */
default:
Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
default_path:
+ Dmsg0(50, "default path\n");
tape_previously_mounted = true;
/*
if (!dir_ask_sysop_to_mount_volume(dcr, ST_READ)) {
goto get_out; /* error return */
}
- try_autochanger = true; /* permit using autochanger again */
+ try_autochanger = true; /* permit trying the autochanger again */
continue; /* try reading again */
} /* end switch */
break;
} /* end for loop */
+
if (!ok) {
Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s for reading.\n"),
dev->print_name());
get_out:
dev->dlock();
- if (dcr && dcr->reserved_device) {
- dev->reserved_device--;
- Dmsg2(50, "Dec reserve=%d dev=%s\n", dev->reserved_device, dev->print_name());
- dcr->reserved_device = false;
- }
+ dcr->clear_reserved();
/*
* Normally we are blocked, but in at least one error case above
* we are not blocked because we unsuccessfully tried changing
*/
if (dev->is_blocked()) {
dev->dunblock(DEV_LOCKED);
+ } else {
+ dev->dunlock(); /* dunblock() unlock the device too */
}
Dmsg1(950, "jcr->dcr=%p\n", jcr->dcr);
return ok;
{
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
+ bool ok = false;
+ bool have_vol = false;
init_device_wait_timers(dcr);
goto get_out;
}
+ dev->clear_unload();
+
/*
* have_vol defines whether or not mount_next_write_volume should
* ask the Director again about what Volume to use.
if (dev->num_writers == 0) {
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
}
- if (!is_tape_position_ok(jcr, dev)) {
- goto get_out;
- }
- } else {
+ have_vol = dcr->is_tape_position_ok();
+ }
+
+ if (!have_vol) {
Dmsg1(190, "jid=%u Do mount_next_write_vol\n", (uint32_t)jcr->JobId);
if (!dcr->mount_next_write_volume()) {
if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
dev->print_name());
- Dmsg2(200, "jid=%u Could not ready device %s for append.\n",
- (uint32_t)jcr->JobId, dev->print_name());
+ Dmsg1(200, "Could not ready device %s for append.\n",
+ dev->print_name());
}
goto get_out;
}
}
dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
- dev->dlock();
- if (dcr->reserved_device) {
- dev->reserved_device--;
- Dmsg3(100, "jid=%u Dec reserve=%d dev=%s\n", (uint32_t)jcr->JobId,
- dev->reserved_device, dev->print_name());
- dcr->reserved_device = false;
- }
- dev->dunblock(DEV_LOCKED);
- return dcr;
+ ok = true;
-/*
- * Error return
- */
get_out:
dev->dlock();
- if (dcr->reserved_device) {
- dev->reserved_device--;
- Dmsg3(100, "jid=%u Dec reserve=%d dev=%s\n", (uint32_t)jcr->JobId,
- dev->reserved_device, dev->print_name());
- dcr->reserved_device = false;
- }
+ dcr->clear_reserved();
dev->dunblock(DEV_LOCKED);
- return NULL;
+ return ok ? dcr : NULL;
}
-/*
- * Insanity check
- *
- * Check to see if the tape position as defined by the OS is
- * the same as our concept. If it is not, we bail out, because
- * it means the user has probably manually rewound the tape.
- * Note, we check only if num_writers == 0, but this code will
- * also work fine for any number of writers. If num_writers > 0,
- * we probably should cancel all jobs using this device, or
- * perhaps even abort the SD, or at a minimum, mark the tape
- * in error. Another strategy with num_writers == 0, would be
- * to rewind the tape and do a new eod() request.
- */
-static bool is_tape_position_ok(JCR *jcr, DEVICE *dev)
-{
- if (dev->is_tape() && dev->num_writers == 0) {
- int32_t file = dev->get_os_tape_file();
- if (file >= 0 && file != (int32_t)dev->get_file()) {
- Jmsg(jcr, M_FATAL, 0, _("Invalid tape position on volume \"%s\""
- " on device %s. Expected %d, got %d\n"),
- dev->VolHdr.VolumeName, dev->print_name(), dev->get_file(), file);
- return false;
- }
- }
- return true;
-}
-
-
/*
* This job is done, so release the device. From a Unix standpoint,
* the device remains open.
JCR *jcr = dcr->jcr;
DEVICE *dev = dcr->dev;
bool ok = true;
+ char tbuf[100];
/* lock only if not already locked by this thread */
if (!dcr->is_dev_locked()) {
Dmsg2(100, "release_device device %s is %s\n", dev->print_name(), dev->is_tape()?"tape":"disk");
/* if device is reserved, job never started, so release the reserve here */
- if (dcr->reserved_device) {
- dev->reserved_device--;
- Dmsg2(100, "Dec reserve=%d dev=%s\n", dev->reserved_device, dev->print_name());
- dcr->reserved_device = false;
- }
+ dcr->clear_reserved();
if (dev->can_read()) {
dev->clear_read(); /* clear read bit */
Dmsg2(200, "dir_update_vol_info. Release vol=%s dev=%s\n",
dev->VolCatInfo.VolCatName, dev->print_name());
}
- if (!dev->num_writers) { /* if no more writers */
+ if (dev->num_writers == 0) { /* if not being used */
volume_unused(dcr); /* we obviously are not using the volume */
}
}
volume_unused(dcr);
}
unlock_volumes();
+ Dmsg3(100, "%d writers, %d reserve, dev=%s\n", dev->num_writers, dev->num_reserved(),
+ dev->print_name());
+ debug_list_volumes("acquire:release_device()");
+
/* If no writers, close if file or !CAP_ALWAYS_OPEN */
if (dev->num_writers == 0 && (!dev->is_tape() || !dev->has_cap(CAP_ALWAYSOPEN))) {
free_pool_memory(alert);
}
pthread_cond_broadcast(&dev->wait_next_vol);
- Dmsg1(100, "JobId=%u broadcast wait_device_release\n", (uint32_t)jcr->JobId);
+ Dmsg2(100, "JobId=%u broadcast wait_device_release at %s\n",
+ (uint32_t)jcr->JobId, bstrftimes(tbuf, sizeof(tbuf), (utime_t)time(NULL)));
pthread_cond_broadcast(&wait_device_release);
dev->dunlock();
if (dcr->keep_dcr) {
JCR *jcr = dcr->jcr;
if (jcr) Dmsg1(500, "JobId=%u enter attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
- if (!dcr->attached_to_dev && dev->initiated && jcr && jcr->JobType != JT_SYSTEM) {
+ if (!dcr->attached_to_dev && dev->initiated && jcr && jcr->get_JobType() != JT_SYSTEM) {
dev->attached_dcrs->append(dcr); /* attach dcr to device */
dcr->attached_to_dev = true;
Dmsg1(500, "JobId=%u attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
/* Detach this dcr only if attached */
if (dcr->attached_to_dev && dev) {
dev->dlock();
- unreserve_device(dcr);
+ dcr->unreserve_device();
dcr->dev->attached_dcrs->remove(dcr); /* detach dcr from device */
dcr->attached_to_dev = false;
// remove_dcr_from_dcrs(dcr); /* remove dcr from jcr list */
}
free(dcr);
}
+
+static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol)
+{
+ /*
+ * Note, if we want to be able to work from a .bsr file only
+ * for disaster recovery, we must "simulate" reading the catalog
+ */
+ bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
+ bstrncpy(dcr->VolCatInfo.VolCatName, vol->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
+ bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
+ dcr->VolCatInfo.Slot = vol->Slot;
+ dcr->VolCatInfo.InChanger = vol->Slot > 0;
+}
projects / bacula / bacula / blobdiff