Copyright (C) 2002-2005 Kern Sibbald
This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
+ modify it under the terms of the GNU General Public License
+ version 2 as amended with additional clauses defined in the
+ file LICENSE in the main source directory.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ the file LICENSE for additional details.
*/
}
DCR *dcr = (DCR *)malloc(sizeof(DCR));
memset(dcr, 0, sizeof(DCR));
- if (jcr) {
- jcr->dcr = dcr;
- }
dcr->jcr = jcr;
- dcr->dev = dev;
if (dev) {
+ if (jcr) {
+ jcr->dcr = dcr;
+ }
+ dcr->dev = dev;
dcr->device = dev->device;
+ dcr->block = new_block(dev);
+ dcr->rec = new_record();
+ dcr->max_job_spool_size = dev->device->max_job_spool_size;
+ /* Attach this dcr only if dev is initialized */
+ if (dev->fd != 0 && jcr && jcr->JobType != JT_SYSTEM) {
+ dev->attached_dcrs->append(dcr); /* attach dcr to device */
+// jcr->dcrs->append(dcr); /* put dcr in list for Job */
+ }
}
- dcr->block = new_block(dev);
- dcr->rec = new_record();
dcr->spool_fd = -1;
- dcr->max_spool_size = dev->device->max_spool_size;
- /* Attach this dcr only if dev is initialized */
- if (dev->fd != 0 && jcr && jcr->JobType != JT_SYSTEM) {
- dev->attached_dcrs->append(dcr);
- }
return dcr;
}
+/*
+ * Search the dcrs list for the given dcr. If it is found,
+ * as it should be, then remove it. Also zap the jcr pointer
+ * to the dcr if it is the same one.
+ */
+#ifdef needed
+static void remove_dcr_from_dcrs(DCR *dcr)
+{
+ JCR *jcr = dcr->jcr;
+ if (jcr->dcrs) {
+ int i = 0;
+ DCR *ldcr;
+ int num = jcr->dcrs->size();
+ for (i=0; i < num; i++) {
+ ldcr = (DCR *)jcr->dcrs->get(i);
+ if (ldcr == dcr) {
+ jcr->dcrs->remove(i);
+ if (jcr->dcr == dcr) {
+ jcr->dcr = NULL;
+ }
+ }
+ }
+ }
+}
+#endif
+
+/*
+ * Free up all aspects of the given dcr -- i.e. dechain it,
+ * release allocated memory, zap pointers, ...
+ */
void free_dcr(DCR *dcr)
{
JCR *jcr = dcr->jcr;
DEVICE *dev = dcr->dev;
- /*
- * If we reserved the device, we must decrement the
- * number of writers.
- */
if (dcr->reserved_device) {
lock_device(dev);
- dev->num_writers--;
+ dev->reserved_device--;
+ Dmsg1(200, "Dec reserve=%d\n", dev->reserved_device);
+ dcr->reserved_device = false;
if (dev->num_writers < 0) {
Jmsg1(dcr->jcr, M_ERROR, 0, _("Hey! num_writers=%d!!!!\n"), dev->num_writers);
dev->num_writers = 0;
- dcr->reserved_device = false;
}
unlock_device(dev);
}
/* Detach this dcr only if the dev is initialized */
if (dev->fd != 0 && jcr && jcr->JobType != JT_SYSTEM) {
- dcr->dev->attached_dcrs->remove(dcr);
+ dev->attached_dcrs->remove(dcr); /* detach dcr from device */
+// remove_dcr_from_dcrs(dcr); /* remove dcr from jcr list */
}
if (dcr->block) {
free_block(dcr->block);
if (dcr->jcr) {
dcr->jcr->dcr = NULL;
}
+ free_unused_volume(dcr); /* free unused vols attached to this dcr */
free(dcr);
}
-/*
- * We "reserve" the drive by setting the ST_READ bit. No one else
- * should touch the drive until that is cleared.
- * This allows the DIR to "reserve" the device before actually
- * starting the job. If the device is not available, the DIR
- * can wait (to be implemented 1/05).
- */
-bool reserve_device_for_read(JCR *jcr, DEVICE *dev)
-{
- DCR *dcr = jcr->dcr;
- bool ok = false;
-
- ASSERT(dcr);
- if (device_is_unmounted(dev)) {
- Jmsg(jcr, M_WARNING, 0, _("device %s is BLOCKED due to user unmount.\n"),
- dev_name(dev));
- return false;
- }
- lock_device(dev);
- block_device(dev, BST_DOING_ACQUIRE);
- unlock_device(dev);
-
- if (dev->is_busy()) {
- Jmsg2(jcr, M_FATAL, 0, _("Device %s is busy. Job %d canceled.\n"),
- dev_name(dev), jcr->JobId);
- goto get_out;
- }
- if (!dcr) {
- dcr = new_dcr(jcr, dev);
- }
- dev->clear_append();
- dev->set_read();
- ok = true;
-
-get_out:
- P(dev->mutex);
- unblock_device(dev);
- V(dev->mutex);
- return ok;
-}
-
-
/*********************************************************************
* Acquire device for reading.
* The drive should have previously been reserved by calling
* Returns: NULL if failed for any reason
* dcr if successful
*/
-DCR *acquire_device_for_read(JCR *jcr, DEVICE *dev)
+DCR *acquire_device_for_read(DCR *dcr)
{
+ DEVICE *dev = dcr->dev;
+ JCR *jcr = dcr->jcr;
bool vol_ok = false;
bool tape_previously_mounted;
bool tape_initially_mounted;
VOL_LIST *vol;
bool try_autochanger = true;
int i;
- DCR *dcr = jcr->dcr;
int vol_label_status;
- lock_device(dev);
- block_device(dev, BST_DOING_ACQUIRE);
- unlock_device(dev);
-
- init_dev_wait_timers(dev);
-
- tape_previously_mounted = dev->can_read() ||
- dev->can_append() ||
- dev->is_labeled();
- tape_initially_mounted = tape_previously_mounted;
+ dev->block(BST_DOING_ACQUIRE);
if (dev->num_writers > 0) {
Jmsg2(jcr, M_FATAL, 0, _("Num_writers=%d not zero. Job %d canceled.\n"),
for (i=1; i<jcr->CurVolume; i++) {
vol = vol->next;
}
+ if (!vol) {
+ goto get_out; /* should not happen */
+ }
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
+ init_device_wait_timers(dcr);
+
+ tape_previously_mounted = dev->can_read() || dev->can_append() ||
+ dev->is_labeled();
+ tape_initially_mounted = tape_previously_mounted;
+
+
/* Volume info is always needed because of VolParts */
Dmsg0(200, "dir_get_volume_info\n");
if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
}
- dev->num_parts = dcr->VolCatInfo.VolCatParts;
-
for (i=0; i<5; i++) {
- dev->clear_label(); /* force reread of label */
+ dev->clear_labeled(); /* force reread of label */
if (job_canceled(jcr)) {
Mmsg1(dev->errmsg, _("Job %d canceled.\n"), jcr->JobId);
goto get_out; /* error return */
* reading. If it is a file, it opens it.
* If it is a tape, it checks the volume name
*/
- for ( ; !dev->is_open(); ) {
- Dmsg1(120, "bstored: open vol=%s\n", dcr->VolumeName);
- if (open_dev(dev, dcr->VolumeName, OPEN_READ_ONLY) < 0) {
- if (dev->dev_errno == EIO) { /* no tape loaded */
- goto default_path;
- }
-
- /* If we have a dvd that requires mount,
- * we need to try to open the label, so the info can be reported
- * if a wrong volume has been mounted. */
- if (dev->is_dvd() && (dcr->VolCatInfo.VolCatParts > 0)) {
- break;
- }
-
- Jmsg(jcr, M_FATAL, 0, _("Open device %s volume %s failed, ERR=%s\n"),
- dev_name(dev), dcr->VolumeName, strerror_dev(dev));
- goto get_out;
+ Dmsg1(100, "bstored: open vol=%s\n", dcr->VolumeName);
+ if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
+ if (dev->dev_errno == EIO) { /* no tape loaded */
+ Jmsg3(jcr, M_WARNING, 0, _("Open device %s Volume \"%s\" failed (EIO): ERR=%s\n"),
+ dev->print_name(), dcr->VolumeName, strerror_dev(dev));
+ goto default_path;
}
- Dmsg1(129, "open_dev %s OK\n", dev_name(dev));
+
+#ifdef xxx_needed
+ /* If we have a dvd that requires mount,
+ * we need to try to open the label, so the info can be reported
+ * if a wrong volume has been mounted.
+ */
+ if (dev->is_dvd() && (dcr->VolCatInfo.VolCatParts > 0)) {
+ break;
+ }
+#endif
+
+ Jmsg3(jcr, M_FATAL, 0, _("Open device %s Volume \"%s\" failed: ERR=%s\n"),
+ dev->print_name(), dcr->VolumeName, strerror_dev(dev));
+ goto get_out;
}
+ Dmsg1(100, "opened dev %s OK\n", dev->print_name());
- if (dev->is_dvd()) {
- vol_label_status = read_dev_volume_label_guess(dcr, 0);
- } else {
- vol_label_status = read_dev_volume_label(dcr);
- }
+ /* Read Volume Label */
- /****FIXME***** do not reread label if ioctl() says we are
- * correctly possitioned. Possibly have way user can turn
- * this optimization (to be implemented) off.
- */
Dmsg0(200, "calling read-vol-label\n");
+ vol_label_status = read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
vol_ok = true;
}
/* Fall through */
default:
- Jmsg(jcr, M_WARNING, 0, "%s", jcr->errmsg);
+ Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
default_path:
tape_previously_mounted = true;
/* If the device requires mount, close it, so the device can be ejected.
* FIXME: This should perhaps be done for all devices. */
- if (dev_cap(dev, CAP_REQMOUNT)) {
- force_close_dev(dev);
+ if (dev->requires_mount()) {
+ force_close_device(dev);
}
/* Call autochanger only once unless ask_sysop called */
stat = autoload_device(dcr, 0, NULL);
if (stat > 0) {
try_autochanger = false;
- continue;
+ continue; /* try reading volume mounted */
}
}
break;
} /* end for loop */
if (!vol_ok) {
- Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device \"%s\".\n"),
- dev_name(dev));
+ Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
+ dev->print_name());
goto get_out;
}
set_jcr_job_status(jcr, JS_Running);
dir_send_job_status(jcr);
Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on device %s.\n"),
- dcr->VolumeName, dev_name(dev));
+ dcr->VolumeName, dev->print_name());
get_out:
- P(dev->mutex);
- unblock_device(dev);
- V(dev->mutex);
+ dev->unblock();
if (!vol_ok) {
free_dcr(dcr);
dcr = NULL;
return dcr;
}
-/*
- * We reserve the device for appending by incrementing the
- * reserved_device. We do virtually all the same work that
- * is done in acquire_device_for_append(), but we do
- * not attempt to mount the device. This routine allows
- * the DIR to reserve multiple devices before *really*
- * starting the job. It also permits the SD to refuse
- * certain devices (not up, ...).
- */
-bool reserve_device_for_append(JCR *jcr, DEVICE *dev)
-{
- DCR *dcr = jcr->dcr;
- bool recycle;
- bool ok = false;
-
- ASSERT(dcr);
-
- lock_device(dev);
- block_device(dev, BST_DOING_ACQUIRE);
- unlock_device(dev);
- if (device_is_unmounted(dev)) {
- Jmsg(jcr, M_WARNING, 0, _("device %s is BLOCKED due to user unmount.\n"),
- dev_name(dev));
- goto get_out;
- }
- Dmsg1(190, "reserve_append device is %s\n", dev_is_tape(dev)?"tape":"disk");
- if (dev->can_append() || dev->num_writers > 0 || dev->reserved_device) {
- Dmsg0(190, "device already in append.\n");
- /*
- * Device already in append mode or reserved for write
- *
- * Check if we have the right Volume mounted
- * OK if current volume info OK
- * OK if next volume matches current volume
- */
- bstrncpy(dcr->VolumeName, dev->VolHdr.VolName, sizeof(dcr->VolumeName));
- if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE) &&
- !(dir_find_next_appendable_volume(dcr) &&
- strcmp(dev->VolHdr.VolName, dcr->VolumeName) == 0)) { /* wrong tape mounted */
- Dmsg0(190, "Wrong tape mounted.\n");
- if (dev->num_writers != 0 || dev->reserved_device) {
- Jmsg(jcr, M_FATAL, 0, _("Device %s is busy writing on another Volume.\n"), dev_name(dev));
- goto get_out;
- }
- } else {
- /*
- * At this point, the correct tape is already mounted, so
- * we do not need to do mount_next_write_volume(), unless
- * we need to recycle the tape.
- */
- recycle = strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") == 0;
- Dmsg1(190, "Correct tape mounted. recycle=%d\n", recycle);
- if (recycle && dev->num_writers != 0) {
- Jmsg(jcr, M_FATAL, 0, _("Cannot recycle volume \"%s\""
- " because it is in use by another job.\n"));
- goto get_out;
- }
- if (dev->num_writers == 0) {
- memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
- }
- }
- } else {
- if (dev->can_read()) {
- Jmsg(jcr, M_FATAL, 0, _("Device %s is busy reading.\n"), dev_name(dev));
- goto get_out;
- }
- ASSERT(dev->num_writers == 0);
- }
-
- dev->reserved_device++;
- dcr->reserved_device = true;
- ok = true;
-
-get_out:
- P(dev->mutex);
- unblock_device(dev);
- V(dev->mutex);
- return ok;
-}
/*
* Acquire device for writing. We permit multiple writers.
* Note, normally reserve_device_for_append() is called
* before this routine.
*/
-DCR *acquire_device_for_append(JCR *jcr, DEVICE *dev)
+DCR *acquire_device_for_append(DCR *dcr)
{
bool release = false;
bool recycle = false;
bool do_mount = false;
- DCR *dcr = jcr->dcr;
+ DEVICE *dev = dcr->dev;
+ JCR *jcr = dcr->jcr;
- if (!dcr) {
- dcr = new_dcr(jcr, dev);
- }
- lock_device(dev);
- block_device(dev, BST_DOING_ACQUIRE);
- unlock_device(dev);
- Dmsg1(190, "acquire_append device is %s\n", dev_is_tape(dev)?"tape":"disk");
+ init_device_wait_timers(dcr);
+
+ dev->block(BST_DOING_ACQUIRE);
+ Dmsg1(190, "acquire_append device is %s\n", dev->is_tape()?"tape":
+ (dev->is_dvd()?"DVD":"disk"));
if (dcr->reserved_device) {
dev->reserved_device--;
+ Dmsg1(200, "Dec reserve=%d\n", dev->reserved_device);
dcr->reserved_device = false;
}
+
+ /*
+ * With the reservation system, this should not happen
+ */
+ if (dev->can_read()) {
+ Jmsg1(jcr, M_FATAL, 0, _("Device %s is busy reading.\n"), dev->print_name());
+ Dmsg1(200, "Device %s is busy reading.\n", dev->print_name());
+ goto get_out;
+ }
+
if (dev->can_append()) {
Dmsg0(190, "device already in append.\n");
/*
* OK if next volume matches current volume
* otherwise mount desired volume obtained from
* dir_find_next_appendable_volume
+ * dev->VolHdr.VolumeName is what is in the drive
+ * dcr->VolumeName is what we pass into the routines, or
+ * get back from the subroutines.
*/
- bstrncpy(dcr->VolumeName, dev->VolHdr.VolName, sizeof(dcr->VolumeName));
+ bstrncpy(dcr->VolumeName, dev->VolHdr.VolumeName, sizeof(dcr->VolumeName));
if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE) &&
!(dir_find_next_appendable_volume(dcr) &&
- strcmp(dev->VolHdr.VolName, dcr->VolumeName) == 0)) { /* wrong tape mounted */
- Dmsg0(190, "Wrong tape mounted.\n");
+ strcmp(dev->VolHdr.VolumeName, dcr->VolumeName) == 0)) { /* wrong tape mounted */
+ Dmsg2(190, "Wrong tape mounted: %s. wants:%s\n", dev->VolHdr.VolumeName,
+ dcr->VolumeName);
+ /* Release volume reserved by dir_find_next_appendable_volume() */
+ if (dcr->VolumeName[0]) {
+ free_unused_volume(dcr);
+ }
if (dev->num_writers != 0 || dev->reserved_device) {
- Jmsg(jcr, M_FATAL, 0, _("Device %s is busy writing on another Volume.\n"), dev_name(dev));
+ Jmsg3(jcr, M_FATAL, 0, _("Wanted Volume \"%s\", but device %s is busy writing on \"%s\" .\n"),
+ dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
+ Dmsg3(200, "Wanted Volume \"%s\", but device %s is busy writing on \"%s\" .\n",
+ dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
goto get_out;
}
/* Wrong tape mounted, release it, then fall through to get correct one */
Dmsg1(190, "Correct tape mounted. recycle=%d\n", recycle);
if (recycle && dev->num_writers != 0) {
Jmsg(jcr, M_FATAL, 0, _("Cannot recycle volume \"%s\""
- " because it is in use by another job.\n"));
+ " on device %s because it is in use by another job.\n"),
+ dev->VolHdr.VolumeName, dev->print_name());
goto get_out;
}
if (dev->num_writers == 0) {
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
}
- }
+ }
} else {
/* Not already in append mode, so mount the device */
Dmsg0(190, "Not in append mode, try mount.\n");
- if (dev->can_read()) {
- Jmsg(jcr, M_FATAL, 0, _("Device %s is busy reading.\n"), dev_name(dev));
- goto get_out;
- }
ASSERT(dev->num_writers == 0);
do_mount = true;
}
if (!mounted) {
if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
- Jmsg(jcr, M_FATAL, 0, _("Could not ready device \"%s\" for append.\n"),
- dev_name(dev));
+ Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
+ dev->print_name());
+ Dmsg1(200, "Could not ready device %s for append.\n",
+ dev->print_name());
}
goto get_out;
}
free_dcr(dcr);
dcr = NULL;
ok_out:
- P(dev->mutex);
- unblock_device(dev);
- V(dev->mutex);
+ dev->unblock();
return dcr;
}
* the device remains open.
*
*/
-bool release_device(JCR *jcr)
+bool release_device(DCR *dcr)
{
- DCR *dcr = jcr->dcr;
+ JCR *jcr = dcr->jcr;
DEVICE *dev = dcr->dev;
+ bool ok = true;
+
lock_device(dev);
- Dmsg1(100, "release_device device is %s\n", dev_is_tape(dev)?"tape":"disk");
+ Dmsg1(100, "release_device device is %s\n", dev->is_tape()?"tape":"disk");
/* if device is reserved, job never started, so release the reserve here */
if (dcr->reserved_device) {
dev->reserved_device--;
+ Dmsg1(200, "Dec reserve=%d\n", dev->reserved_device);
dcr->reserved_device = false;
}
if (dev->can_read()) {
dev->clear_read(); /* clear read bit */
- if (!dev_is_tape(dev) || !dev_cap(dev, CAP_ALWAYSOPEN)) {
- offline_or_rewind_dev(dev);
- close_dev(dev);
- }
+
/******FIXME**** send read volume usage statistics to director */
} else if (dev->num_writers > 0) {
+ /*
+ * Note if WEOT is set, we are at the end of the tape
+ * and may not be positioned correctly, so the
+ * job_media_record and update_vol_info have already been
+ * done, which means we skip them here.
+ */
dev->num_writers--;
Dmsg1(100, "There are %d writers in release_device\n", dev->num_writers);
if (dev->is_labeled()) {
Dmsg0(100, "dir_create_jobmedia_record. Release\n");
- if (!dir_create_jobmedia_record(dcr)) {
+ if (!dev->at_weot() && !dir_create_jobmedia_record(dcr)) {
Jmsg(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
dcr->VolCatInfo.VolCatName, jcr->Job);
}
/* If no more writers, write an EOF */
- if (!dev->num_writers && dev_can_write(dev)) {
+ if (!dev->num_writers && dev->can_write()) {
weof_dev(dev, 1);
+ write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
+ }
+ if (!dev->at_weot()) {
+ dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
+ dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
+ /* Note! do volume update before close, which zaps VolCatInfo */
+ Dmsg0(100, "dir_update_vol_info. Release0\n");
+ dir_update_volume_info(dcr, false); /* send Volume info to Director */
}
- dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
- dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
- /* Note! do volume update before close, which zaps VolCatInfo */
- Dmsg0(100, "dir_update_vol_info. Release0\n");
- dir_update_volume_info(dcr, false); /* send Volume info to Director */
}
- if (dev->num_writers == 0 && dev->is_tape() && !dev_cap(dev, CAP_ALWAYSOPEN)) {
- offline_or_rewind_dev(dev);
- close_dev(dev);
- }
} else {
- Jmsg2(jcr, M_FATAL, 0, _("BAD ERROR: release_device %s, Volume \"%s\" not in use.\n"),
- dev_name(dev), NPRT(dcr->VolumeName));
- Jmsg2(jcr, M_ERROR, 0, _("num_writers=%d state=%x\n"), dev->num_writers, dev->state);
+ /*
+ * If we reach here, it is most likely because the job
+ * has failed, since the device is not in read mode and
+ * there are no writers. It was probably reserved.
+ */
+ }
+
+ /* If no writers, close if file or !CAP_ALWAYS_OPEN */
+ if (dev->num_writers == 0 && (!dev->is_tape() || !dev_cap(dev, CAP_ALWAYSOPEN))) {
+ offline_or_rewind_dev(dev);
+ close_device(dev);
}
/* Fire off Alert command and include any output */
BPIPE *bpipe;
char line[MAXSTRING];
alert = get_pool_memory(PM_FNAME);
- alert = edit_device_codes(dcr, alert, "");
+ alert = edit_device_codes(dcr, alert, dcr->device->alert_command, "");
bpipe = open_bpipe(alert, 0, "r");
if (bpipe) {
while (fgets(line, sizeof(line), bpipe->rfd)) {
free_pool_memory(alert);
}
unlock_device(dev);
- free_dcr(jcr->dcr);
+ free_dcr(dcr);
jcr->dcr = NULL;
- return true;
+ pthread_cond_broadcast(&wait_device_release);
+ return ok;
}
projects / bacula / bacula / blobdiff