-/*
- * Append code for Storage daemon
- * Kern Sibbald, May MM
- *
- * Version $Id$
- */
/*
Bacula® - The Network Backup Solution
- Copyright (C) 2000-2007 Free Software Foundation Europe e.V.
+ Copyright (C) 2000-2009 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
modify it under the terms of version two of the GNU General Public
- License as published by the Free Software Foundation plus additions
- that are listed in the file LICENSE.
+ License as published by the Free Software Foundation and included
+ in the file LICENSE.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of Kern Sibbald.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
*/
+/*
+ * Append code for Storage daemon
+ * Kern Sibbald, May MM
+ *
+ * Version $Id$
+ */
#include "bacula.h"
#include "stored.h"
return false;
}
- Dmsg1(100, "Start append data. res=%d\n", dev->reserved_device);
+ Dmsg1(100, "Start append data. res=%d\n", dev->num_reserved());
memset(&rec, 0, sizeof(rec));
ds = fd_sock;
- if (!bnet_set_buffer_size(ds, dcr->device->max_network_buffer_size, BNET_SETBUF_WRITE)) {
+ if (!ds->set_buffer_size(dcr->device->max_network_buffer_size, BNET_SETBUF_WRITE)) {
set_jcr_job_status(jcr, JS_ErrorTerminated);
Jmsg0(jcr, M_FATAL, 0, _("Unable to set network buffer size.\n"));
return false;
}
/* Tell File daemon to send data */
- if (!bnet_fsend(fd_sock, OK_data)) {
+ if (!fd_sock->fsend(OK_data)) {
berrno be;
Jmsg1(jcr, M_FATAL, 0, _("Network send error to FD. ERR=%s\n"),
- be.strerror(fd_sock->b_errno));
+ be.bstrerror(fd_sock->b_errno));
ok = false;
}
* The stream header consists of the following:
* file_index (sequential Bacula file index, base 1)
* stream (Bacula number to distinguish parts of data)
- * info (Info for Storage daemon -- compressed, encryped, ...)
+ * info (Info for Storage daemon -- compressed, encrypted, ...)
* info is not currently used, so is read, but ignored!
*/
if ((n=bget_msg(ds)) <= 0) {
break; /* end of data */
}
Jmsg1(jcr, M_FATAL, 0, _("Error reading data header from FD. ERR=%s\n"),
- bnet_strerror(ds));
+ ds->bstrerror());
ok = false;
break;
}
- /*
- * This hand scanning is a bit more complicated than a simple
- * sscanf, but it allows us to handle any size integer up to
- * int64_t without worrying about whether %d, %ld, %lld, or %q
- * is the correct format for each different architecture.
- * It is a real pity that sscanf() is not portable.
- */
- char *p = ds->msg;
- while (B_ISSPACE(*p)) {
- p++;
- }
- file_index = (int32_t)str_to_int64(p);
- while (B_ISDIGIT(*p)) {
- p++;
- }
- if (!B_ISSPACE(*p) || !B_ISDIGIT(*(p+1))) {
+ if (sscanf(ds->msg, "%ld %ld", &file_index, &stream) != 2) {
Jmsg1(jcr, M_FATAL, 0, _("Malformed data header from FD: %s\n"), ds->msg);
ok = false;
break;
}
- stream = (int32_t)str_to_int64(p);
Dmsg2(890, "<filed: Header FilInx=%d stream=%d\n", file_index, stream);
if (stream == STREAM_UNIX_ATTRIBUTES || stream == STREAM_UNIX_ATTRIBUTES_EX ||
crypto_digest_stream_type(stream) != CRYPTO_DIGEST_NONE) {
if (!jcr->no_attributes) {
+ BSOCK *dir = jcr->dir_bsock;
if (are_attributes_spooled(jcr)) {
- jcr->dir_bsock->spool = true;
+ dir->set_spooling();
}
Dmsg0(850, "Send attributes to dir.\n");
if (!dir_update_file_attributes(dcr, &rec)) {
- jcr->dir_bsock->spool = false;
+ dir->clear_spooling();
Jmsg(jcr, M_FATAL, 0, _("Error updating file attributes. ERR=%s\n"),
- bnet_strerror(jcr->dir_bsock));
+ dir->bstrerror());
ok = false;
break;
}
- jcr->dir_bsock->spool = false;
+ dir->clear_spooling();
}
}
Dmsg0(650, "Enter bnet_get\n");
}
Dmsg1(650, "End read loop with FD. Stat=%d\n", n);
- if (is_bnet_error(ds)) {
- Dmsg1(350, "Network read error from FD. ERR=%s\n", bnet_strerror(ds));
- Jmsg1(jcr, M_FATAL, 0, _("Network error on data channel. ERR=%s\n"),
- bnet_strerror(ds));
+ if (ds->is_error()) {
+ if (!job_canceled(jcr)) {
+ Dmsg1(350, "Network read error from FD. ERR=%s\n", ds->bstrerror());
+ Jmsg1(jcr, M_FATAL, 0, _("Network error on data channel. ERR=%s\n"),
+ ds->bstrerror());
+ }
ok = false;
break;
}
set_jcr_job_status(jcr, ok?JS_Terminated:JS_ErrorTerminated);
/* Terminate connection with FD */
- bnet_fsend(ds, OK_append);
+ ds->fsend(OK_append);
do_fd_commands(jcr); /* finish dialog with FD */
-
- time_t job_elapsed = time(NULL) - jcr->run_time;
+ /*
+ * Don't use time_t for job_elapsed as time_t can be 32 or 64 bits,
+ * and the subsequent Jmsg() editing will break
+ */
+ int32_t job_elapsed = time(NULL) - jcr->run_time;
if (job_elapsed <= 0) {
job_elapsed = 1;
}
- Jmsg(dcr->jcr, M_INFO, 0, _("Job write elapsed time = %02d:%02d:%02d, Transfer rate = %s bytes/second\n"),
+ Jmsg(dcr->jcr, M_INFO, 0, _("Job write elapsed time = %02d:%02d:%02d, Transfer rate = %s Bytes/second\n"),
job_elapsed / 3600, job_elapsed % 3600 / 60, job_elapsed % 60,
edit_uint64_with_suffix(jcr->JobBytes / job_elapsed, ec));
* Check if we can still write. This may not be the case
* if we are at the end of the tape or we got a fatal I/O error.
*/
- if (dev->can_write()) {
+ if (ok || dev->can_write()) {
if (!write_session_label(dcr, EOS_LABEL)) {
- Jmsg1(jcr, M_FATAL, 0, _("Error writting end session label. ERR=%s\n"),
+ Jmsg1(jcr, M_FATAL, 0, _("Error writing end session label. ERR=%s\n"),
dev->bstrerror());
set_jcr_job_status(jcr, JS_ErrorTerminated);
ok = false;
}
if (dev->VolCatInfo.VolCatName[0] == 0) {
Pmsg0(000, _("NULL Volume name. This shouldn't happen!!!\n"));
+ Dmsg0(000, _("NULL Volume name. This shouldn't happen!!!\n"));
}
Dmsg0(90, "back from write_end_session_label()\n");
/* Flush out final partial block of this session */
if (!write_block_to_device(dcr)) {
- Jmsg2(jcr, M_FATAL, 0, _("Fatal append error on device %s: ERR=%s\n"),
- dev->print_name(), dev->bstrerror());
- Dmsg0(100, _("Set ok=FALSE after write_block_to_device.\n"));
+ if (!job_canceled(jcr)) {
+ Jmsg2(jcr, M_FATAL, 0, _("Fatal append error on device %s: ERR=%s\n"),
+ dev->print_name(), dev->bstrerror());
+ Dmsg0(100, _("Set ok=FALSE after write_block_to_device.\n"));
+ }
ok = false;
}
+ if (dev->VolCatInfo.VolCatName[0] == 0) {
+ Pmsg0(000, _("NULL Volume name. This shouldn't happen!!!\n"));
+ Dmsg0(000, _("NULL Volume name. This shouldn't happen!!!\n"));
+ }
}
- if (dev->VolCatInfo.VolCatName[0] == 0) {
- Pmsg0(000, _("NULL Volume name. This shouldn't happen!!!\n"));
- }
-
if (!ok) {
projects / bacula / bacula / blobdiff