#include "stored.h" /* pull in Storage Deamon headers */
/* Forward referenced functions */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd);
+char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd);
+static int get_autochanger_loaded_slot(JCR *jcr);
/*
* dir bsock.
*
* Returns: 1 on success
- * 0 on failure
+ * 0 on failure (no changer available)
+ * -1 on error on autochanger
*/
int autoload_device(JCR *jcr, DEVICE *dev, int writing, BSOCK *dir)
{
int slot = jcr->VolCatInfo.Slot;
- int rtn_stat = 0;
+ int drive = jcr->device->drive_index;
+ int rtn_stat = -1; /* error status */
/*
* Handle autoloaders here. If we cannot autoload it, we
slot = jcr->VolCatInfo.Slot;
}
}
- Dmsg1(100, "Want changer slot=%d\n", slot);
+ Dmsg1(400, "Want changer slot=%d\n", slot);
if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
uint32_t timeout = jcr->device->max_changer_wait;
POOLMEM *changer, *results;
- int status, loaded;
+ int loaded, status;
results = get_pool_memory(PM_MESSAGE);
changer = get_pool_memory(PM_FNAME);
- /* Find out what is loaded, zero means device is unloaded */
- Jmsg(jcr, M_INFO, 0, _("3301 Issuing autochanger \"loaded\" command.\n"));
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
- "loaded");
- status = run_program(changer, timeout, results);
- Dmsg3(100, "run_prog: %s stat=%d result=%s\n", changer, status, results);
- if (status == 0) {
- loaded = atoi(results);
- } else {
- Jmsg(jcr, M_INFO, 0, _("3991 Bad autochanger \"load slot\" status=%d.\n"), status);
- loaded = -1; /* force unload */
- }
- Dmsg1(100, "loaded=%s\n", results);
+ loaded = get_autochanger_loaded_slot(jcr);
+
+ Dmsg1(400, "loaded=%s\n", results);
- /* If bad status or tape we want is not loaded, load it. */
- if (status != 0 || loaded != slot) {
+ /* If tape we want is not loaded, load it. */
+ if (loaded != slot) {
offline_or_rewind_dev(dev);
/* We are going to load a new tape, so close the device */
force_close_dev(dev);
if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- Jmsg(jcr, M_INFO, 0, _("3302 Issuing autochanger \"unload\" command.\n"));
+ Dmsg0(400, "Doing changer unload.\n");
+ Jmsg(jcr, M_INFO, 0,
+ _("3303 Issuing autochanger \"unload slot %d, drive %d\" command.\n"),
+ loaded, drive);
+ jcr->VolCatInfo.Slot = loaded; /* slot to be unloaded */
changer = edit_device_codes(jcr, changer,
jcr->device->changer_command, "unload");
status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
+ Dmsg1(400, "unload status=%d\n", status);
}
/*
* Load the desired cassette
*/
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- Jmsg(jcr, M_INFO, 0, _("3303 Issuing autochanger \"load slot %d\" command.\n"),
- slot);
+ Dmsg1(400, "Doing changer load slot %d\n", slot);
+ Jmsg(jcr, M_INFO, 0,
+ _("3304 Issuing autochanger \"load slot %d, drive %d\" command.\n"),
+ slot, drive);
+ jcr->VolCatInfo.Slot = slot; /* slot to be loaded */
changer = edit_device_codes(jcr, changer,
jcr->device->changer_command, "load");
status = run_program(changer, timeout, NULL);
if (status == 0) {
- Jmsg(jcr, M_INFO, 0, _("3304 Autochanger \"load slot %d\" status is OK.\n"),
- slot);
+ Jmsg(jcr, M_INFO, 0, _("3305 Autochanger \"load slot %d, drive %d\", status is OK.\n"),
+ slot, drive);
} else {
- Jmsg(jcr, M_INFO, 0, _("3992 Bad autochanger \"load slot\" status=%d.\n"),
- status);
+ Jmsg(jcr, M_INFO, 0, _("3992 Bad autochanger \"load slot %d, drive %d\", status=%d.\n"),
+ slot, drive, status);
}
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
+ Dmsg2(400, "load slot %d status=%d\n", slot, status);
+ } else {
+ status = 0; /* we got what we want */
}
free_pool_memory(changer);
free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
- if (status == 0) { /* did we succeed? */
- rtn_stat = 1; /* tape loaded by changer */
+ Dmsg1(400, "After changer, status=%d\n", status);
+ if (status == 0) { /* did we succeed? */
+ rtn_stat = 1; /* tape loaded by changer */
}
+ } else {
+ rtn_stat = 0; /* no changer found */
}
return rtn_stat;
}
+static int get_autochanger_loaded_slot(JCR *jcr)
+{
+ POOLMEM *changer, *results;
+ int status, loaded;
+ uint32_t timeout = jcr->device->max_changer_wait;
+ int drive = jcr->device->drive_index;
+
+ results = get_pool_memory(PM_MESSAGE);
+ changer = get_pool_memory(PM_FNAME);
+
+ /* Find out what is loaded, zero means device is unloaded */
+ Jmsg(jcr, M_INFO, 0, _("3301 Issuing autochanger \"loaded drive %d\" command.\n"),
+ drive);
+ changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
+ "loaded");
+ status = run_program(changer, timeout, results);
+ Dmsg3(100, "run_prog: %s stat=%d result=%s\n", changer, status, results);
+ if (status == 0) {
+ loaded = atoi(results);
+ if (loaded > 0) {
+ Jmsg(jcr, M_INFO, 0, _("3302 Autochanger \"loaded drive %d\", result is Slot %d.\n"),
+ drive, loaded);
+ } else {
+ Jmsg(jcr, M_INFO, 0, _("3302 Autochanger \"loaded drive %d\", result: nothing loaded.\n"),
+ drive);
+ }
+ } else {
+ Jmsg(jcr, M_INFO, 0, _("3991 Bad autochanger \"loaded drive %d\" command, status=%d.\n"),
+ drive, status);
+ loaded = -1; /* force unload */
+ }
+ free_pool_memory(changer);
+ free_pool_memory(results);
+ return loaded;
+}
+
/*
* The Volume is not in the correct slot, so mark this
* Volume as not being in the Changer.
uint32_t timeout = jcr->device->max_changer_wait;
POOLMEM *changer;
BPIPE *bpipe;
+ int slot, loaded;
int len = sizeof_pool_memory(dir->msg) - 1;
if (!dev_cap(dev, CAP_AUTOCHANGER) || !jcr->device->changer_name ||
force_close_dev(dev);
/* First unload any tape */
- bnet_fsend(dir, _("3305 Issuing autochanger \"unload\" command.\n"));
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "unload");
- run_program(changer, timeout, NULL);
+ loaded = get_autochanger_loaded_slot(jcr);
+ if (loaded > 0) {
+ bnet_fsend(dir, _("3305 Issuing autochanger \"unload slot %d\" command.\n"), loaded);
+ slot = jcr->VolCatInfo.Slot;
+ jcr->VolCatInfo.Slot = loaded;
+ changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "unload");
+ run_program(changer, timeout, NULL);
+ jcr->VolCatInfo.Slot = slot;
+ }
/* Now list slots occupied */
changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "list");
* %% = %
* %a = archive device name
* %c = changer device name
+ * %d = changer drive index
* %f = Client's name
* %j = Job name
* %o = command
* cmd = command string (load, unload, ...)
*
*/
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd)
+char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd)
{
char *p;
const char *str;
char add[20];
*omsg = 0;
- Dmsg1(200, "edit_device_codes: %s\n", imsg);
+ Dmsg1(400, "edit_device_codes: %s\n", imsg);
for (p=imsg; *p; p++) {
if (*p == '%') {
switch (*++p) {
case 'c':
str = NPRT(jcr->device->changer_name);
break;
+ case 'd':
+ sprintf(add, "%d", jcr->device->dev->drive_index);
+ str = add;
+ break;
case 'o':
str = NPRT(cmd);
break;
add[1] = 0;
str = add;
}
- Dmsg1(200, "add_str %s\n", str);
+ Dmsg1(400, "add_str %s\n", str);
pm_strcat(&omsg, (char *)str);
- Dmsg1(200, "omsg=%s\n", omsg);
+ Dmsg1(400, "omsg=%s\n", omsg);
}
return omsg;
}
projects / bacula / bacula / blobdiff