slot = jcr->VolCatInfo.Slot;
}
}
- Dmsg1(100, "Want changer slot=%d\n", slot);
+ Dmsg1(400, "Want changer slot=%d\n", slot);
if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
uint32_t timeout = jcr->device->max_changer_wait;
changer = get_pool_memory(PM_FNAME);
/* Find out what is loaded, zero means device is unloaded */
+ Jmsg(jcr, M_INFO, 0, _("3301 Issuing autochanger \"loaded\" command.\n"));
changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
"loaded");
status = run_program(changer, timeout, results);
if (status == 0) {
loaded = atoi(results);
} else {
+ Jmsg(jcr, M_INFO, 0, _("3991 Bad autochanger \"load slot\" status=%d.\n"), status);
loaded = -1; /* force unload */
}
- Dmsg1(100, "loaded=%s\n", results);
+ Dmsg1(400, "loaded=%s\n", results);
/* If bad status or tape we want is not loaded, load it. */
if (status != 0 || loaded != slot) {
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
- }
+ offline_or_rewind_dev(dev);
/* We are going to load a new tape, so close the device */
force_close_dev(dev);
if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- if (dir) {
- bnet_fsend(dir, _("3902 Issuing autochanger \"unload\" command.\n"));
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
- }
+ Dmsg0(400, "Doing changer unload.\n");
+ Jmsg(jcr, M_INFO, 0, _("3302 Issuing autochanger \"unload\" command.\n"));
changer = edit_device_codes(jcr, changer,
jcr->device->changer_command, "unload");
status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
+ Dmsg1(400, "unload status=%d\n", status);
}
/*
* Load the desired cassette
*/
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- if (dir) {
- bnet_fsend(dir, _("3903 Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- }
+ Dmsg1(400, "Doing changer load slot %d\n", slot);
+ Jmsg(jcr, M_INFO, 0, _("3303 Issuing autochanger \"load slot %d\" command.\n"),
+ slot);
changer = edit_device_codes(jcr, changer,
jcr->device->changer_command, "load");
status = run_program(changer, timeout, NULL);
if (status == 0) {
- Jmsg(jcr, M_INFO, 0, _("Autochanger \"load slot\" status is OK.\n"));
+ Jmsg(jcr, M_INFO, 0, _("3304 Autochanger \"load slot %d\" status is OK.\n"),
+ slot);
} else {
- Jmsg(jcr, M_INFO, 0, _("Bad autochanger \"load slot\" status = %d.\n"),
- status);
+ Jmsg(jcr, M_INFO, 0, _("3992 Bad autochanger \"load slot\" status=%d.\n"),
+ status);
}
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
+ Dmsg2(400, "load slot %d status=%d\n", slot, status);
}
free_pool_memory(changer);
free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
+ Dmsg1(400, "After changer, status=%d\n", status);
if (status == 0) { /* did we succeed? */
rtn_stat = 1; /* tape loaded by changer */
}
return rtn_stat;
}
+/*
+ * The Volume is not in the correct slot, so mark this
+ * Volume as not being in the Changer.
+ */
+void invalid_slot_in_catalog(JCR *jcr, DEVICE *dev)
+{
+ Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume \"%s\" not found in slot %d.\n"
+" Setting slot to zero in catalog.\n"),
+ jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
+ jcr->VolCatInfo.InChanger = false;
+ dev->VolCatInfo.InChanger = false;
+ Dmsg0(100, "update vol info in mount\n");
+ dir_update_volume_info(jcr, dev, 1); /* set new status */
+}
+
/*
* List the Volumes that are in the autoloader possibly
* with their barcodes.
+ * We assume that it is always the Console that is calling us.
*/
int autochanger_list(JCR *jcr, DEVICE *dev, BSOCK *dir)
{
if (!dev_cap(dev, CAP_AUTOCHANGER) || !jcr->device->changer_name ||
!jcr->device->changer_command) {
- bnet_fsend(dir, _("Not a changer device.\n"));
+ bnet_fsend(dir, _("3993 Not a autochanger device.\n"));
return 0;
}
changer = get_pool_memory(PM_FNAME);
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
- }
+ offline_or_rewind_dev(dev);
/* We are going to load a new tape, so close the device */
force_close_dev(dev);
/* First unload any tape */
- bnet_fsend(dir, _("3902 Issuing autochanger \"unload\" command.\n"));
+ bnet_fsend(dir, _("3305 Issuing autochanger \"unload\" command.\n"));
changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "unload");
run_program(changer, timeout, NULL);
/* Now list slots occupied */
changer = edit_device_codes(jcr, changer, jcr->device->changer_command, "list");
- bnet_fsend(dir, _("3903 Issuing autochanger \"list\" command.\n"));
+ bnet_fsend(dir, _("3306 Issuing autochanger \"list\" command.\n"));
bpipe = open_bpipe(changer, timeout, "r");
if (!bpipe) {
- bnet_fsend(dir, _("Open bpipe failed.\n"));
+ bnet_fsend(dir, _("3993 Open bpipe failed.\n"));
goto bail_out;
}
/* Get output from changer */
char add[20];
*omsg = 0;
- Dmsg1(200, "edit_device_codes: %s\n", imsg);
+ Dmsg1(400, "edit_device_codes: %s\n", imsg);
for (p=imsg; *p; p++) {
if (*p == '%') {
switch (*++p) {
str = "%";
break;
case 'a':
- str = jcr->device->dev->dev_name;
+ str = dev_name(jcr->device->dev);
break;
case 'c':
str = NPRT(jcr->device->changer_name);
add[1] = 0;
str = add;
}
- Dmsg1(200, "add_str %s\n", str);
+ Dmsg1(400, "add_str %s\n", str);
pm_strcat(&omsg, (char *)str);
- Dmsg1(200, "omsg=%s\n", omsg);
+ Dmsg1(400, "omsg=%s\n", omsg);
}
return omsg;
}
projects / bacula / bacula / blobdiff