SDPort = @sd_port@ # Director's port
WorkingDirectory = "@working_dir@"
Pid Directory = "@piddir@"
- Maximum Concurrent Jobs = 1
+ Maximum Concurrent Jobs = 20
}
#
Device {
Name = FileStorage
Media Type = File
- Archive Device = /tmp
+ Archive Device = @archivedir@
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = no;
}
+#
+# An autochanger device with two drives
+#
+#Autochanger {
+# Name = Autochanger
+# Device = Drive-1
+# Device = Drive-2
+# Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+# Changer Device = /dev/sg0
+#}
+
+#Device {
+# Name = Drive-1 #
+# Drive Index = 0
+# Media Type = DLT-8000
+# Archive Device = /dev/nst0
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# #
+# # Enable the Alert command only if you have the mtx package loaded
+# # Note, apparently on some systems, tapeinfo resets the SCSI controller
+# # thus if you turn this on, make sure it does not reset your SCSI
+# # controller. I have never had any problems, and smartctl does
+# # not seem to cause such problems.
+# #
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#Device {
+# Name = Drive-2 #
+# Drive Index = 1
+# Media Type = DLT-8000
+# Archive Device = /dev/nst1
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
#
# A Linux or Solaris tape drive
#
## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
-## Alert Command = "sh -c 'tapeinfo -f %c | grep TapeAlert'"
+# # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo
+## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# Backward Space Record = no
# Fast Forward Space File = no
# TWO EOF = yes
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
## The min/max blocksizes of 32768 are *required*
# Minimum Block Size = 32768
# Maximum Block Size = 32768
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
+#
+# A DVD device
+#
+#Device {
+# Name = "DVD Writer"
+# Media Type = DVD
+# Device Type = DVD
+# Archive Device = /dev/hdc
+# LabelMedia = yes; # lets Bacula label unlabeled media
+# Random Access = Yes;
+# AutomaticMount = yes; # when device opened, read it
+# RemovableMedia = yes;
+# AlwaysOpen = no;
+# MaximumPartSize = 800M;
+# RequiresMount = yes;
+# MountPoint = /mnt/cdrom;
+# MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
+# UnmountCommand = "/bin/umount %m";
+# SpoolDirectory = /tmp/backup;
+# WritePartCommand = "@scriptdir@/dvd-handler %a write %e %v"
+# FreeSpaceCommand = "@scriptdir@/dvd-handler %a free"
+#}
-
-
+#
+# For OpenBSD OS >= 3.6
+#
+#Device {
+# Name = DDS-3
+# Media Type = DDS-3
+# Archive Device = /dev/nrst0
+# Use MTIOCGET= no
+# BSF at EOM = yes
+# TWO EOF = no
+# AutomaticMount = yes;
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
#
# A very old Exabyte with no end of media detection
# AlwaysOpen = Yes;
# RemovableMedia = yes;
# RandomAccess = no;
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#