SDPort = @sd_port@ # Director's port
WorkingDirectory = "@working_dir@"
Pid Directory = "@piddir@"
- Subsys Directory = "@subsysdir@"
+ Maximum Concurrent Jobs = 20
}
#
Password = "@sd_password@"
}
+#
+# Restricted Director, used by tray-monitor to get the
+# status of the storage daemon
+#
+Director {
+ Name = @hostname@-mon
+ Password = "@mon_sd_password@"
+ Monitor = yes
+}
+
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
Device {
Name = FileStorage
Media Type = File
- Archive Device = /tmp
- LabelMedia = yes; # lets Bacula label unlabelled media
+ Archive Device = @archivedir@
+ LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
+#
+# An autochanger device with two drives
+#
+#Autochanger {
+# Name = Autochanger
+# Device = Drive-1
+# Device = Drive-2
+# Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+# Changer Device = /dev/sg0
+#}
+
#Device {
-# Name = "HP DLT 80"
-# Media Type = DLT8000
-# Archive Device = @TAPEDRIVE@
+# Name = Drive-1 #
+# Drive Index = 0
+# Media Type = DLT-8000
+# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# #
+# # Enable the Alert command only if you have the mtx package loaded
+# # Note, apparently on some systems, tapeinfo resets the SCSI controller
+# # thus if you turn this on, make sure it does not reset your SCSI
+# # controller. I have never had any problems, and smartctl does
+# # not seem to cause such problems.
+# #
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#Device {
-# Name = SDT-7000 #
-# Media Type = DDS-2
-# Archive Device = @TAPEDRIVE@
+# Name = Drive-2 #
+# Drive Index = 1
+# Media Type = DLT-8000
+# Archive Device = /dev/nst1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
+#
+# A Linux or Solaris tape drive
+#
#Device {
-# Name = Floppy
-# Media Type = Floppy
-# Archive Device = /mnt/floppy
+# Name = DDS-4 #
+# Media Type = DDS-4
+# Archive Device = @TAPEDRIVE@
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
# RemovableMedia = yes;
+# RandomAccess = no;
+## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+## Changer Device = /dev/sg0
+## AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo
+## Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#
+# A FreeBSD tape drive
+#
+#Device {
+# Name = DDS-4
+# Description = "DDS-4 for FreeBSD"
+# Media Type = DDS-4
+# Archive Device = /dev/nsa1
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes
+# Offline On Unmount = no
+# Hardware End of Medium = no
+# BSF at EOM = yes
+# Backward Space Record = no
+# Fast Forward Space File = no
+# TWO EOF = yes
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#
+# A OnStream tape drive.
+# You need the kernel osst driver 0.9.14 or later, and
+# do "mt -f /dev/nosst0 defblksize 32768" once as root.
+#
+#Device {
+# Name = OnStream
+# Description = "OnStream drive on Linux"
+# Media Type = OnStream
+# Archive Device = @TAPEDRIVE@
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes
+# Offline On Unmount = no
+## The min/max blocksizes of 32768 are *required*
+# Minimum Block Size = 32768
+# Maximum Block Size = 32768
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#
+# A DVD device
+#
+#Device {
+# Name = "DVD Writer"
+# Media Type = DVD
+# Device Type = DVD
+# Archive Device = /dev/hdc
+# LabelMedia = yes; # lets Bacula label unlabeled media
# Random Access = Yes;
# AutomaticMount = yes; # when device opened, read it
+# RemovableMedia = yes;
# AlwaysOpen = no;
+# MaximumPartSize = 800M;
+# RequiresMount = yes;
+# MountPoint = /mnt/cdrom;
+# MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
+# UnmountCommand = "/bin/umount %m";
+# SpoolDirectory = /tmp/backup;
+# WritePartCommand = "@scriptdir@/dvd-handler %a write %e %v"
+# FreeSpaceCommand = "@scriptdir@/dvd-handler %a free"
+#}
+
+#
+# For OpenBSD OS >= 3.6
+#
+#Device {
+# Name = DDS-3
+# Media Type = DDS-3
+# Archive Device = /dev/nrst0
+# Use MTIOCGET= no
+# BSF at EOM = yes
+# TWO EOF = no
+# AutomaticMount = yes;
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = Yes;
# RemovableMedia = yes;
+# RandomAccess = no;
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
projects / bacula / bacula / blobdiff