Second cut of drive switching during backup

[bacula/bacula] / bacula / src / stored / bacula-sd.conf.in

diff --git a/bacula/src/stored/bacula-sd.conf.in b/bacula/src/stored/bacula-sd.conf.in
index 3cb2fcf5138acb90ca8863a3e3cde702222fa269..4c0ad8b5980b5f00ba1487ccf2e4d3dac50d38e0 100644 (file)
--- a/bacula/src/stored/bacula-sd.conf.in
+++ b/bacula/src/stored/bacula-sd.conf.in
@@ -15,6 +15,7 @@ Storage {                             # definition of myself
   SDPort = @sd_port@                  # Director's port      
   WorkingDirectory = "@working_dir@"
   Pid Directory = "@piddir@"
+  Maximum Concurrent Jobs = 20
 }
 
 #
@@ -25,6 +26,16 @@ Director {
   Password = "@sd_password@"
 }
 
+#
+# Restricted Director, used by tray-monitor to get the
+#   status of the storage daemon
+#
+Director {
+  Name = @hostname@-mon
+  Password = "@mon_sd_password@"
+  Monitor = yes
+}
+
 #
 # Devices supported by this Storage daemon
 # To connect, the Director's bacula-dir.conf must have the
@@ -34,7 +45,7 @@ Director {
 Device {
   Name = FileStorage
   Media Type = File
-  Archive Device = /tmp
+  Archive Device = @archivedir@
   LabelMedia = yes;                   # lets Bacula label unlabeled media
   Random Access = Yes;
   AutomaticMount = yes;               # when device opened, read it
@@ -42,6 +53,55 @@ Device {
   AlwaysOpen = no;
 }
 
+#
+# An autochanger device with two drives
+#
+#Autochanger {
+#  Name = Autochanger
+#  Device = Drive-1
+#  Device = Drive-2
+#  Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+#  Changer Device = /dev/sg0
+#}
+
+#Device {
+#  Name = Drive-1                      #
+#  Drive Index = 0
+#  Media Type = DLT-8000
+#  Archive Device = /dev/nst0
+#  AutomaticMount = yes;               # when device opened, read it
+#  AlwaysOpen = yes;
+#  RemovableMedia = yes;
+#  RandomAccess = no;
+#  AutoChanger = yes
+#  #
+#  # Enable the Alert command only if you have the mtx package loaded
+#  # Note, apparently on some systems, tapeinfo resets the SCSI controller
+#  #  thus if you turn this on, make sure it does not reset your SCSI 
+#  #  controller.  I have never had any problems, and smartctl does
+#  #  not seem to cause such problems.
+#  #
+#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
+#}
+
+#Device {
+#  Name = Drive-2                      #
+#  Drive Index = 1
+#  Media Type = DLT-8000
+#  Archive Device = /dev/nst1
+#  AutomaticMount = yes;               # when device opened, read it
+#  AlwaysOpen = yes;
+#  RemovableMedia = yes;
+#  RandomAccess = no;
+#  AutoChanger = yes
+#  # Enable the Alert command only if you have the mtx package loaded
+#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
+#}
+
 #
 # A Linux or Solaris tape drive
 #
@@ -53,6 +113,13 @@ Device {
 #  AlwaysOpen = yes;
 #  RemovableMedia = yes;
 #  RandomAccess = no;
+## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+## Changer Device = /dev/sg0
+## AutoChanger = yes
+#  # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo 
+## Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #
@@ -71,6 +138,8 @@ Device {
 #  Backward Space Record = no
 #  Fast Forward Space File = no
 #  TWO EOF = yes
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #
@@ -87,13 +156,52 @@ Device {
 #  AlwaysOpen = yes
 #  Offline On Unmount = no
 ## The min/max blocksizes of 32768 are *required*
-#  Minimum Block Size = 32768                             
-#  Maximum Block Size = 32768
+#  Minimum Block Size = 32768
+#  Maximum Block Size = 32768
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
  
+#
+# A DVD device
+#
+#Device {
+#  Name = "DVD Writer"
+#  Media Type = DVD
+#  Device Type = DVD
+#  Archive Device = /dev/hdc
+#  LabelMedia = yes;                   # lets Bacula label unlabeled media
+#  Random Access = Yes;
+#  AutomaticMount = yes;               # when device opened, read it
+#  RemovableMedia = yes;
+#  AlwaysOpen = no;
+#  MaximumPartSize = 800M;
+#  RequiresMount = yes;
+#  MountPoint = /mnt/cdrom;
+#  MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
+#  UnmountCommand = "/bin/umount %m";
+#  SpoolDirectory = /tmp/backup;
+#  WritePartCommand = "@scriptdir@/dvd-handler %a write %e %v"
+#  FreeSpaceCommand = "@scriptdir@/dvd-handler %a free"
+#}
 
- 
-
+#
+# For OpenBSD OS >= 3.6
+#
+#Device {
+#  Name = DDS-3
+#  Media Type = DDS-3
+#  Archive Device = /dev/nrst0
+#  Use MTIOCGET= no
+#  BSF at EOM = yes
+#  TWO EOF = no
+#  AutomaticMount = yes;
+#  AlwaysOpen = yes;
+#  RemovableMedia = yes;
+#  RandomAccess = no;
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
+#}
 
 #
 # A very old Exabyte with no end of media detection
@@ -107,6 +215,8 @@ Device {
 #  AlwaysOpen = Yes;
 #  RemovableMedia = yes;
 #  RandomAccess = no;
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #