Second cut of drive switching during backup

[bacula/bacula] / bacula / src / stored / bacula-sd.conf.in

diff --git a/bacula/src/stored/bacula-sd.conf.in b/bacula/src/stored/bacula-sd.conf.in
index 97ac7618927315268e349a9cddf452fc1299f095..4c0ad8b5980b5f00ba1487ccf2e4d3dac50d38e0 100644 (file)
--- a/bacula/src/stored/bacula-sd.conf.in
+++ b/bacula/src/stored/bacula-sd.conf.in
@@ -45,7 +45,7 @@ Director {
 Device {
   Name = FileStorage
   Media Type = File
-  Archive Device = /tmp
+  Archive Device = @archivedir@
   LabelMedia = yes;                   # lets Bacula label unlabeled media
   Random Access = Yes;
   AutomaticMount = yes;               # when device opened, read it
@@ -53,6 +53,55 @@ Device {
   AlwaysOpen = no;
 }
 
+#
+# An autochanger device with two drives
+#
+#Autochanger {
+#  Name = Autochanger
+#  Device = Drive-1
+#  Device = Drive-2
+#  Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+#  Changer Device = /dev/sg0
+#}
+
+#Device {
+#  Name = Drive-1                      #
+#  Drive Index = 0
+#  Media Type = DLT-8000
+#  Archive Device = /dev/nst0
+#  AutomaticMount = yes;               # when device opened, read it
+#  AlwaysOpen = yes;
+#  RemovableMedia = yes;
+#  RandomAccess = no;
+#  AutoChanger = yes
+#  #
+#  # Enable the Alert command only if you have the mtx package loaded
+#  # Note, apparently on some systems, tapeinfo resets the SCSI controller
+#  #  thus if you turn this on, make sure it does not reset your SCSI 
+#  #  controller.  I have never had any problems, and smartctl does
+#  #  not seem to cause such problems.
+#  #
+#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
+#}
+
+#Device {
+#  Name = Drive-2                      #
+#  Drive Index = 1
+#  Media Type = DLT-8000
+#  Archive Device = /dev/nst1
+#  AutomaticMount = yes;               # when device opened, read it
+#  AlwaysOpen = yes;
+#  RemovableMedia = yes;
+#  RandomAccess = no;
+#  AutoChanger = yes
+#  # Enable the Alert command only if you have the mtx package loaded
+#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
+#}
+
 #
 # A Linux or Solaris tape drive
 #
@@ -67,7 +116,10 @@ Device {
 ## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
 ## Changer Device = /dev/sg0
 ## AutoChanger = yes
+#  # Enable the Alert command only if you have the mtx package loaded
 ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo 
+## Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #
@@ -86,6 +138,8 @@ Device {
 #  Backward Space Record = no
 #  Fast Forward Space File = no
 #  TWO EOF = yes
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #
@@ -104,14 +158,17 @@ Device {
 ## The min/max blocksizes of 32768 are *required*
 #  Minimum Block Size = 32768
 #  Maximum Block Size = 32768
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
  
 #
 # A DVD device
 #
 #Device {
-#  Name = "DVD-WRITER"
+#  Name = "DVD Writer"
 #  Media Type = DVD
+#  Device Type = DVD
 #  Archive Device = /dev/hdc
 #  LabelMedia = yes;                   # lets Bacula label unlabeled media
 #  Random Access = Yes;
@@ -124,8 +181,8 @@ Device {
 #  MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
 #  UnmountCommand = "/bin/umount %m";
 #  SpoolDirectory = /tmp/backup;
-#  WritePartCommand = "/etc/bacula/dvd-writepart %n %a %v"
-#  FreeSpaceCommand = "/etc/bacula/dvd-freespace %a %n"
+#  WritePartCommand = "@scriptdir@/dvd-handler %a write %e %v"
+#  FreeSpaceCommand = "@scriptdir@/dvd-handler %a free"
 #}
 
 #
@@ -142,6 +199,8 @@ Device {
 #  AlwaysOpen = yes;
 #  RemovableMedia = yes;
 #  RandomAccess = no;
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #
@@ -156,6 +215,8 @@ Device {
 #  AlwaysOpen = Yes;
 #  RemovableMedia = yes;
 #  RandomAccess = no;
+#  If you have smartctl, enable this, it has more info than tapeinfo 
+#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
 #}
 
 #