#
Storage { # definition of myself
- Name = @hostname@-sd
+ Name = @basename@-sd
SDPort = @sd_port@ # Director's port
WorkingDirectory = "@working_dir@"
Pid Directory = "@piddir@"
+ Maximum Concurrent Jobs = 20
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
- Name = @hostname@-dir
+ Name = @basename@-dir
Password = "@sd_password@"
}
+#
+# Restricted Director, used by tray-monitor to get the
+# status of the storage daemon
+#
+Director {
+ Name = @basename@-mon
+ Password = "@mon_sd_password@"
+ Monitor = yes
+}
+
+#
+# Note, for a list of additional Device templates please
+# see the directory <bacula-source>/examples/devices
+# Or follow the following link:
+# http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
+#
+
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
Device {
Name = FileStorage
Media Type = File
- Archive Device = /tmp
+ Archive Device = @archivedir@
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = no;
}
+#
+# An autochanger device with two drives
+#
+#Autochanger {
+# Name = Autochanger
+# Device = Drive-1
+# Device = Drive-2
+# Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+# Changer Device = /dev/sg0
+#}
+
#Device {
-# Name = DDS-4 #
-# Media Type = DDS-4
+# Name = Drive-1 #
+# Drive Index = 0
+# Media Type = DLT-8000
+# Archive Device = /dev/nst0
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# #
+# # Enable the Alert command only if you have the mtx package loaded
+# # Note, apparently on some systems, tapeinfo resets the SCSI controller
+# # thus if you turn this on, make sure it does not reset your SCSI
+# # controller. I have never had any problems, and smartctl does
+# # not seem to cause such problems.
+# #
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#Device {
+# Name = Drive-2 #
+# Drive Index = 1
+# Media Type = DLT-8000
+# Archive Device = /dev/nst1
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#
+# A Linux or Solaris LTO-2 tape drive
+#
+#Device {
+# Name = LTO-2
+# Media Type = LTO-2
# Archive Device = @TAPEDRIVE@
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
+# Maximum File Size = 3GB
+## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+## Changer Device = /dev/sg0
+## AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo
+## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
-# A very old Exabyte with no end of media detection
+# A Linux or Solaris LTO-3 tape drive
#
#Device {
-# Name = "Exabyte 8mm"
-# Media Type = "8mm"
+# Name = LTO-3
+# Media Type = LTO-3
# Archive Device = @TAPEDRIVE@
-# Hardware end of medium = No;
# AutomaticMount = yes; # when device opened, read it
-# AlwaysOpen = Yes;
+# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
+# Maximum File Size = 4GB
+## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+## Changer Device = /dev/sg0
+## AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo
+## Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+#
+# A Linux or Solaris LTO-4 tape drive
+#
+#Device {
+# Name = LTO-4
+# Media Type = LTO-4
+# Archive Device = @TAPEDRIVE@
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes;
+# RemovableMedia = yes;
+# RandomAccess = no;
+# Maximum File Size = 5GB
+## Changer Command = "@scriptdir@/mtx-changer %c %o %S %a %d"
+## Changer Device = /dev/sg0
+## AutoChanger = yes
+# # Enable the Alert command only if you have the mtx package loaded
+## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
+## If you have smartctl, enable this, it has more info than tapeinfo
+## Alert Command = "sh -c 'smartctl -H -l error %c'"
+#}
+
+
+
+
+#
+# A FreeBSD tape drive
+#
+#Device {
+# Name = DDS-4
+# Description = "DDS-4 for FreeBSD"
+# Media Type = DDS-4
+# Archive Device = /dev/nsa1
+# AutomaticMount = yes; # when device opened, read it
+# AlwaysOpen = yes
+# Offline On Unmount = no
+# Hardware End of Medium = no
+# BSF at EOM = yes
+# Backward Space Record = no
+# Fast Forward Space File = no
+# TWO EOF = yes
+# If you have smartctl, enable this, it has more info than tapeinfo
+# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
#
Messages {
Name = Standard
- director = @hostname@-dir = all
+ director = @basename@-dir = all
}
projects / bacula / bacula / blobdiff