+/*
+ Bacula® - The Network Backup Solution
+
+ Copyright (C) 2002-2007 Free Software Foundation Europe e.V.
+
+ The main author of Bacula is Kern Sibbald, with contributions from
+ many others, a complete list can be found in the file AUTHORS.
+ This program is Free Software; you can redistribute it and/or
+ modify it under the terms of version two of the GNU General Public
+ License as published by the Free Software Foundation plus additions
+ that are listed in the file LICENSE.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+ Bacula® is a registered trademark of John Walker.
+ The licensor of Bacula is the Free Software Foundation Europe
+ (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+ Switzerland, email:ftf@fsfeurope.org.
+*/
/*
*
* Program to copy a Bacula from one volume to another.
*
* Version $Id$
*/
-/*
- Copyright (C) 2002-2005 Kern Sibbald
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
-
- */
#include "bacula.h"
#include "stored.h"
+/* Dummy functions */
+int generate_daemon_event(JCR *jcr, const char *event) { return 1; }
+
/* Forward referenced functions */
static bool record_cb(DCR *dcr, DEV_RECORD *rec);
/* Global variables */
static DEVICE *in_dev = NULL;
static DEVICE *out_dev = NULL;
-static JCR *in_jcr; /* input jcr */
-static JCR *out_jcr; /* output jcr */
+static JCR *in_jcr; /* input jcr */
+static JCR *out_jcr; /* output jcr */
static BSR *bsr = NULL;
static const char *wd = "/tmp";
static int list_records = 0;
static DEV_BLOCK *out_block;
#define CONFIG_FILE "bacula-sd.conf"
-char *configfile;
-STORES *me = NULL; /* our Global resource */
-bool forge_on = false; /* proceed inspite of I/O errors */
+char *configfile = NULL;
+STORES *me = NULL; /* our Global resource */
+bool forge_on = false; /* proceed inspite of I/O errors */
pthread_mutex_t device_release_mutex = PTHREAD_MUTEX_INITIALIZER;
pthread_cond_t wait_device_release = PTHREAD_COND_INITIALIZER;
static void usage()
{
fprintf(stderr, _(
-"Copyright (C) 2002-2005 Kern Sibbald.\n"
-"\nVersion: " VERSION " (" BDATE ")\n\n"
+PROG_COPYRIGHT
+"\nVersion: %s (%s)\n\n"
"Usage: bcopy [-d debug_level] <input-archive> <output-archive>\n"
" -b bootstrap specify a bootstrap file\n"
" -c <file> specify configuration file\n"
" -p proceed inspite of errors\n"
" -v verbose\n"
" -w <dir> specify working directory (default /tmp)\n"
-" -? print this message\n\n"));
+" -? print this message\n\n"), 2002, VERSION, BDATE);
exit(1);
}
char *oVolumeName = NULL;
bool ignore_label_errors = false;
+ setlocale(LC_ALL, "");
+ bindtextdomain("bacula", LOCALEDIR);
+ textdomain("bacula");
+ init_stack_dump();
+
my_name_is(argc, argv, "bcopy");
init_msg(NULL, NULL);
while ((ch = getopt(argc, argv, "b:c:d:i:o:pvw:?")) != -1) {
switch (ch) {
case 'b':
- bsr = parse_bsr(NULL, optarg);
- break;
+ bsr = parse_bsr(NULL, optarg);
+ break;
case 'c': /* specify config file */
- if (configfile != NULL) {
- free(configfile);
- }
- configfile = bstrdup(optarg);
- break;
+ if (configfile != NULL) {
+ free(configfile);
+ }
+ configfile = bstrdup(optarg);
+ break;
case 'd': /* debug level */
- debug_level = atoi(optarg);
- if (debug_level <= 0)
- debug_level = 1;
- break;
+ debug_level = atoi(optarg);
+ if (debug_level <= 0)
+ debug_level = 1;
+ break;
case 'i': /* input Volume name */
- iVolumeName = optarg;
- break;
+ iVolumeName = optarg;
+ break;
case 'o': /* output Volume name */
- oVolumeName = optarg;
- break;
+ oVolumeName = optarg;
+ break;
case 'p':
- ignore_label_errors = true;
- forge_on = true;
- break;
+ ignore_label_errors = true;
+ forge_on = true;
+ break;
case 'v':
- verbose++;
- break;
+ verbose++;
+ break;
case 'w':
- wd = optarg;
- break;
+ wd = optarg;
+ break;
case '?':
default:
- usage();
+ usage();
}
}
usage();
}
+ OSDependentInit();
+
working_directory = wd;
if (configfile == NULL) {
parse_config(configfile);
/* Setup and acquire input device for reading */
+ Dmsg0(100, "About to setup input jcr\n");
in_jcr = setup_jcr("bcopy", argv[0], bsr, iVolumeName, 1); /* read device */
if (!in_jcr) {
exit(1);
}
/* Setup output device for writing */
+ Dmsg0(100, "About to setup output jcr\n");
out_jcr = setup_jcr("bcopy", argv[1], bsr, oVolumeName, 0); /* no acquire */
if (!out_jcr) {
exit(1);
if (!out_dev) {
exit(1);
}
+ Dmsg0(100, "About to acquire device for writing\n");
/* For we must now acquire the device for writing */
- lock_device(out_dev);
- if (open_dev(out_dev, out_jcr->dcr->VolumeName, OPEN_READ_WRITE) < 0) {
+ out_dev->r_dlock();
+ if (out_dev->open(out_jcr->dcr, OPEN_READ_WRITE) < 0) {
Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), out_dev->errmsg);
- unlock_device(out_dev);
+ out_dev->dunlock();
exit(1);
}
- unlock_device(out_dev);
- if (!acquire_device_for_append(out_jcr, out_dev)) {
+ out_dev->dunlock();
+ if (!acquire_device_for_append(out_jcr->dcr)) {
free_jcr(in_jcr);
exit(1);
}
free_jcr(in_jcr);
free_jcr(out_jcr);
- term_dev(in_dev);
- term_dev(out_dev);
+ in_dev->term();
+ out_dev->term();
return 0;
}
{
if (list_records) {
Pmsg5(000, _("Record: SessId=%u SessTim=%u FileIndex=%d Stream=%d len=%u\n"),
- rec->VolSessionId, rec->VolSessionTime, rec->FileIndex,
- rec->Stream, rec->data_len);
+ rec->VolSessionId, rec->VolSessionTime, rec->FileIndex,
+ rec->Stream, rec->data_len);
}
/*
* Check for Start or End of Session Record
if (rec->FileIndex < 0) {
if (verbose > 1) {
- dump_label_record(in_dcr->dev, rec, 1);
+ dump_label_record(in_dcr->dev, rec, 1);
}
switch (rec->FileIndex) {
case PRE_LABEL:
- Pmsg0(000, "Volume is prelabeled. This volume cannot be copied.\n");
- return false;
+ Pmsg0(000, _("Volume is prelabeled. This volume cannot be copied.\n"));
+ return false;
case VOL_LABEL:
- Pmsg0(000, "Volume label not copied.\n");
- return true;
+ Pmsg0(000, _("Volume label not copied.\n"));
+ return true;
case SOS_LABEL:
- jobs++;
- break;
+ jobs++;
+ break;
case EOS_LABEL:
- while (!write_record_to_block(out_block, rec)) {
+ while (!write_record_to_block(out_block, rec)) {
Dmsg2(150, "!write_record_to_block data_len=%d rem=%d\n", rec->data_len,
- rec->remainder);
- if (!write_block_to_device(out_jcr->dcr)) {
+ rec->remainder);
+ if (!write_block_to_device(out_jcr->dcr)) {
Dmsg2(90, "Got write_block_to_dev error on device %s: ERR=%s\n",
- out_dev->print_name(), strerror_dev(out_dev));
+ out_dev->print_name(), out_dev->bstrerror());
Jmsg(out_jcr, M_FATAL, 0, _("Cannot fixup device error. %s\n"),
- strerror_dev(out_dev));
- }
- }
- if (!write_block_to_device(out_jcr->dcr)) {
+ out_dev->bstrerror());
+ }
+ }
+ if (!write_block_to_device(out_jcr->dcr)) {
Dmsg2(90, "Got write_block_to_dev error on device %s: ERR=%s\n",
- out_dev->print_name(), strerror_dev(out_dev));
+ out_dev->print_name(), out_dev->bstrerror());
Jmsg(out_jcr, M_FATAL, 0, _("Cannot fixup device error. %s\n"),
- strerror_dev(out_dev));
- }
- break;
+ out_dev->bstrerror());
+ }
+ break;
case EOM_LABEL:
- Pmsg0(000, "EOM label not copied.\n");
- return true;
- case EOT_LABEL: /* end of all tapes */
- Pmsg0(000, "EOT label not copied.\n");
- return true;
+ Pmsg0(000, _("EOM label not copied.\n"));
+ return true;
+ case EOT_LABEL: /* end of all tapes */
+ Pmsg0(000, _("EOT label not copied.\n"));
+ return true;
default:
- break;
+ break;
}
}
records++;
while (!write_record_to_block(out_block, rec)) {
Dmsg2(150, "!write_record_to_block data_len=%d rem=%d\n", rec->data_len,
- rec->remainder);
+ rec->remainder);
if (!write_block_to_device(out_jcr->dcr)) {
Dmsg2(90, "Got write_block_to_dev error on device %s: ERR=%s\n",
- out_dev->print_name(), strerror_dev(out_dev));
+ out_dev->print_name(), out_dev->bstrerror());
Jmsg(out_jcr, M_FATAL, 0, _("Cannot fixup device error. %s\n"),
- strerror_dev(out_dev));
- break;
+ out_dev->bstrerror());
+ break;
}
}
return true;
/* Dummies to replace askdir.c */
-bool dir_get_volume_info(DCR *dcr, enum get_vol_info_rw writing) { return 1;}
-bool dir_find_next_appendable_volume(DCR *dcr) { return 1;}
-bool dir_update_volume_info(DCR *dcr, bool relabel) { return 1; }
-bool dir_create_jobmedia_record(DCR *dcr) { return 1; }
-bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr) { return 1; }
-bool dir_update_file_attributes(DCR *dcr, DEV_RECORD *rec) { return 1;}
-bool dir_send_job_status(JCR *jcr) {return 1;}
+bool dir_find_next_appendable_volume(DCR *dcr) { return 1;}
+bool dir_update_volume_info(DCR *dcr, bool relabel) { return 1; }
+bool dir_create_jobmedia_record(DCR *dcr) { return 1; }
+bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr) { return 1; }
+bool dir_update_file_attributes(DCR *dcr, DEV_RECORD *rec) { return 1;}
+bool dir_send_job_status(JCR *jcr) {return 1;}
bool dir_ask_sysop_to_mount_volume(DCR *dcr)
{
DEVICE *dev = dcr->dev;
- fprintf(stderr, "Mount Volume \"%s\" on device %s and press return when ready: ",
+ fprintf(stderr, _("Mount Volume \"%s\" on device %s and press return when ready: "),
dcr->VolumeName, dev->print_name());
+ dev->close();
getchar();
return true;
}
+
+bool dir_get_volume_info(DCR *dcr, enum get_vol_info_rw writing)
+{
+ Dmsg0(100, "Fake dir_get_volume_info\n");
+ bstrncpy(dcr->VolCatInfo.VolCatName, dcr->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
+ dcr->VolCatInfo.VolCatParts = find_num_dvd_parts(dcr);
+ Dmsg2(500, "Vol=%s num_parts=%d\n", dcr->VolCatInfo.VolCatName, dcr->VolCatInfo.VolCatParts);
+ return 1;
+}