+/*
+ Bacula® - The Network Backup Solution
+
+ Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
+
+ The main author of Bacula is Kern Sibbald, with contributions from
+ many others, a complete list can be found in the file AUTHORS.
+ This program is Free Software; you can redistribute it and/or
+ modify it under the terms of version two of the GNU General Public
+ License as published by the Free Software Foundation and included
+ in the file LICENSE.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+ Bacula® is a registered trademark of John Walker.
+ The licensor of Bacula is the Free Software Foundation Europe
+ (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+ Switzerland, email:ftf@fsfeurope.org.
+*/
/*
*
* Bacula Tape manipulation program
* Version $Id$
*
*/
-/*
- Copyright (C) 2000-2005 Kern Sibbald
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as ammended with additional clauses defined in the
- file LICENSE in the main source directory.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- the file LICENSE for additional details.
-
- */
#include "bacula.h"
#include "stored.h"
+#ifdef USE_VTAPE
+#include "vtape.h"
+#endif
+
/* Dummy functions */
int generate_daemon_event(JCR *jcr, const char *event) { return 1; }
static void clearcmd();
static void wrcmd();
static void rrcmd();
+static void rbcmd();
static void eodcmd();
static void fillcmd();
static void qfillcmd();
static void scan_blocks();
static void set_volume_name(const char *VolName, int volnum);
static void rawfill_cmd();
-static void bfill_cmd();
static bool open_the_device();
static void autochangercmd();
static void do_unfill();
static int argc;
static int quickie_count = 0;
+static uint64_t write_count = 0;
static BSR *bsr = NULL;
static int signals = TRUE;
static bool ok;
/*********************************************************************
*
- * Main Bacula Pool Creation Program
+ * Bacula tape testing program
*
*/
int main(int margc, char *margv[])
uint32_t x32, y32;
uint64_t x64, y64;
char buf[1000];
+
+ setlocale(LC_ALL, "");
+ bindtextdomain("bacula", LOCALEDIR);
+ textdomain("bacula");
+ init_stack_dump();
/* Sanity checks */
if (TAPE_BSIZE % B_DEV_BSIZE != 0 || TAPE_BSIZE / B_DEV_BSIZE == 0) {
- Emsg2(M_ABORT, 0, "Tape block size (%d) not multiple of system size (%d)\n",
+ Emsg2(M_ABORT, 0, _("Tape block size (%d) not multiple of system size (%d)\n"),
TAPE_BSIZE, B_DEV_BSIZE);
}
if (TAPE_BSIZE != (1 << (ffs(TAPE_BSIZE)-1))) {
- Emsg1(M_ABORT, 0, "Tape block size (%d) is not a power of 2\n", TAPE_BSIZE);
+ Emsg1(M_ABORT, 0, _("Tape block size (%d) is not a power of 2\n"), TAPE_BSIZE);
}
- if (sizeof(off_t) < 8) {
- Pmsg1(-1, "\n\n!!!! Warning large disk addressing disabled. off_t=%d should be 8 or more !!!!!\n\n\n",
- sizeof(off_t));
+ if (sizeof(boffset_t) < 8) {
+ Pmsg1(-1, _("\n\n!!!! Warning large disk addressing disabled. boffset_t=%d should be 8 or more !!!!!\n\n\n"),
+ sizeof(boffset_t));
}
x32 = 123456789;
bsnprintf(buf, sizeof(buf), "%u", x32);
- i = bsscanf(buf, "%u", &y32);
+ i = bsscanf(buf, "%lu", &y32);
if (i != 1 || x32 != y32) {
- Pmsg3(-1, "32 bit printf/scanf problem. i=%d x32=%u y32=%u\n", i, x32, y32);
+ Pmsg3(-1, _("32 bit printf/scanf problem. i=%d x32=%u y32=%u\n"), i, x32, y32);
exit(1);
}
x64 = 123456789;
bsnprintf(buf, sizeof(buf), "%" llu, x64);
i = bsscanf(buf, "%llu", &y64);
if (i != 1 || x64 != y64) {
- Pmsg3(-1, "64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n", i, x64, y64);
+ Pmsg3(-1, _("64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n"),
+ i, x64, y64);
exit(1);
}
- printf("Tape block granularity is %d bytes.\n", TAPE_BSIZE);
+ printf(_("Tape block granularity is %d bytes.\n"), TAPE_BSIZE);
working_directory = "/tmp";
my_name_is(margc, margv, "btape");
init_msg(NULL, NULL);
+ OSDependentInit();
+
while ((ch = getopt(margc, margv, "b:c:d:psv?")) != -1) {
switch (ch) {
case 'b': /* bootstrap file */
break;
case 'd': /* set debug level */
- debug_level = atoi(optarg);
- if (debug_level <= 0) {
- debug_level = 1;
+ if (*optarg == 't') {
+ dbg_timestamp = true;
+ } else {
+ debug_level = atoi(optarg);
+ if (debug_level <= 0) {
+ debug_level = 1;
+ }
}
break;
/* See if we can open a device */
if (margc == 0) {
- Pmsg0(000, "No archive name specified.\n");
+ Pmsg0(000, _("No archive name specified.\n"));
usage();
exit(1);
} else if (margc != 1) {
- Pmsg0(000, "Improper number of arguments specified.\n");
+ Pmsg0(000, _("Improper number of arguments specified.\n"));
usage();
exit(1);
}
if (!dev) {
exit(1);
}
+ if (dev->is_dvd()) {
+ Pmsg0(000, _("btape does not work with DVD storage.\n"));
+ usage();
+ exit(1);
+ }
+ if (!dev->is_tape()) {
+ Pmsg0(000, _("btape only works with tape storage.\n"));
+ usage();
+ exit(1);
+ }
dcr = jcr->dcr;
if (!open_the_device()) {
goto terminate;
jcr = NULL;
if (dev) {
- term_dev(dev);
+ dev->term();
}
+ free_volume_list();
+
if (debug_level > 10)
print_memory_pool_stats();
static bool open_the_device()
{
DEV_BLOCK *block;
+ bool ok = true;
block = new_block(dev);
- lock_device(dev);
- if (!dev->is_open()) {
- Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
- if (dev->open(dcr, OPEN_READ_WRITE) < 0) {
- Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
- unlock_device(dev);
- free_block(block);
- return false;
- }
+ dev->r_dlock();
+ Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
+ if (dev->open(dcr, OPEN_READ_WRITE) < 0) {
+ Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
+ ok = false;
+ goto bail_out;
}
- Pmsg1(000, "open_ ev %s OK\n", dev->print_name());
+ Pmsg1(000, _("open device %s: OK\n"), dev->print_name());
dev->set_append(); /* put volume in append mode */
- unlock_device(dev);
+
+bail_out:
+ dev->dunlock();
free_block(block);
- return true;
+ return ok;
}
if (VolumeName) {
pm_strcpy(cmd, VolumeName);
} else {
- if (!get_cmd("Enter Volume Name: ")) {
+ if (!get_cmd(_("Enter Volume Name: "))) {
return;
}
}
if (!dev->is_open()) {
if (!first_open_device(dcr)) {
- Pmsg1(0, "Device open failed. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(0, _("Device open failed. ERR=%s\n"), dev->bstrerror());
}
}
- rewind_dev(dev);
- write_new_volume_label_to_dev(dcr, cmd, "Default");
- Pmsg1(-1, "Wrote Volume label for volume \"%s\".\n", cmd);
+ dev->rewind(dcr);
+ dev->weof(1);
+ write_new_volume_label_to_dev(dcr, cmd, "Default", false,/*no relabel*/ true /* label dvd now */);
+ Pmsg1(-1, _("Wrote Volume label for volume \"%s\".\n"), cmd);
}
/*
stat = read_dev_volume_label(dcr);
switch (stat) {
case VOL_NO_LABEL:
- Pmsg0(0, "Volume has no label.\n");
+ Pmsg0(0, _("Volume has no label.\n"));
break;
case VOL_OK:
- Pmsg0(0, "Volume label read correctly.\n");
+ Pmsg0(0, _("Volume label read correctly.\n"));
break;
case VOL_IO_ERROR:
- Pmsg1(0, "I/O error on device: ERR=%s", strerror_dev(dev));
+ Pmsg1(0, _("I/O error on device: ERR=%s"), dev->bstrerror());
break;
case VOL_NAME_ERROR:
- Pmsg0(0, "Volume name error\n");
+ Pmsg0(0, _("Volume name error\n"));
break;
case VOL_CREATE_ERROR:
- Pmsg1(0, "Error creating label. ERR=%s", strerror_dev(dev));
+ Pmsg1(0, _("Error creating label. ERR=%s"), dev->bstrerror());
break;
case VOL_VERSION_ERROR:
- Pmsg0(0, "Volume version error.\n");
+ Pmsg0(0, _("Volume version error.\n"));
break;
case VOL_LABEL_ERROR:
- Pmsg0(0, "Bad Volume label type.\n");
+ Pmsg0(0, _("Bad Volume label type.\n"));
break;
default:
- Pmsg0(0, "Unknown error.\n");
+ Pmsg0(0, _("Unknown error.\n"));
break;
}
{
if (!load_dev(dev)) {
- Pmsg1(0, "Bad status from load. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(0, _("Bad status from load. ERR=%s\n"), dev->bstrerror());
} else
- Pmsg1(0, "Loaded %s\n", dev->print_name());
+ Pmsg1(0, _("Loaded %s\n"), dev->print_name());
}
/*
*/
static void rewindcmd()
{
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
- clrerror_dev(dev, -1);
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
+ dev->clrerror(-1);
} else {
- Pmsg1(0, "Rewound %s\n", dev->print_name());
+ Pmsg1(0, _("Rewound %s\n"), dev->print_name());
}
}
*/
static void clearcmd()
{
- clrerror_dev(dev, -1);
+ dev->clrerror(-1);
}
/*
*/
static void weofcmd()
{
- int stat;
int num = 1;
if (argc > 1) {
num = atoi(argk[1]);
num = 1;
}
- if ((stat = weof_dev(dev, num)) < 0) {
- Pmsg2(0, "Bad status from weof %d. ERR=%s\n", stat, strerror_dev(dev));
+ if (!dev->weof(num)) {
+ Pmsg1(0, _("Bad status from weof. ERR=%s\n"), dev->bstrerror());
return;
} else {
- Pmsg3(0, "Wrote %d EOF%s to %s\n", num, num==1?"":"s", dev->print_name());
+ if (num==1) {
+ Pmsg1(0, _("Wrote 1 EOF to %s\n"), dev->print_name());
+ }
+ else {
+ Pmsg2(0, _("Wrote %d EOFs to %s\n"), num, dev->print_name());
+ }
}
}
*/
static void eomcmd()
{
- if (!eod_dev(dev)) {
- Pmsg1(0, "%s", strerror_dev(dev));
+ if (!dev->eod(dcr)) {
+ Pmsg1(0, "%s", dev->bstrerror());
return;
} else {
Pmsg0(0, _("Moved to end of medium.\n"));
num = 1;
}
- if (!bsf_dev(dev, num)) {
- Pmsg1(0, _("Bad status from bsf. ERR=%s\n"), strerror_dev(dev));
+ if (!dev->bsf(num)) {
+ Pmsg1(0, _("Bad status from bsf. ERR=%s\n"), dev->bstrerror());
} else {
Pmsg2(0, _("Backspaced %d file%s.\n"), num, num==1?"":"s");
}
if (num <= 0) {
num = 1;
}
- if (!bsr_dev(dev, num)) {
- Pmsg1(0, _("Bad status from bsr. ERR=%s\n"), strerror_dev(dev));
+ if (!dev->bsr(num)) {
+ Pmsg1(0, _("Bad status from bsr. ERR=%s\n"), dev->bstrerror());
} else {
Pmsg2(0, _("Backspaced %d record%s.\n"), num, num==1?"":"s");
}
printf("File=%u block=%u\n", dev->file, dev->block_num);
printf("Min block=%u Max block=%u\n", dev->min_block_size, dev->max_block_size);
- printf("Status:\n");
+ printf(_("Status:\n"));
statcmd();
}
DEV_RECORD *rec;
int i, blkno = 0;
- Pmsg0(0, "Test writting larger and larger records.\n"
+ Pmsg0(0, _("Test writting larger and larger records.\n"
"This is a torture test for records.\nI am going to write\n"
"larger and larger records. It will stop when the record size\n"
-"plus the header exceeds the block size (by default about 64K)\n");
+"plus the header exceeds the block size (by default about 64K)\n"));
- get_cmd("Do you want to continue? (y/n): ");
+ get_cmd(_("Do you want to continue? (y/n): "));
if (cmd[0] != 'y') {
- Pmsg0(000, "Command aborted.\n");
+ Pmsg0(000, _("Command aborted.\n"));
return;
}
if (write_record_to_block(block, rec)) {
empty_block(block);
blkno++;
- Pmsg2(0, "Block %d i=%d\n", blkno, i);
+ Pmsg2(0, _("Block %d i=%d\n"), blkno, i);
} else {
break;
}
Pmsg1(0, _("Wrote third record of %d bytes.\n"), rec->data_len);
}
weofcmd();
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
- if (!bsf_dev(dev, 1)) {
- Pmsg1(0, _("Backspace file failed! ERR=%s\n"), strerror_dev(dev));
+ if (!dev->bsf(1)) {
+ Pmsg1(0, _("Backspace file failed! ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
- if (dev_cap(dev, CAP_TWOEOF)) {
- if (!bsf_dev(dev, 1)) {
- Pmsg1(0, _("Backspace file failed! ERR=%s\n"), strerror_dev(dev));
+ if (dev->has_cap(CAP_TWOEOF)) {
+ if (!dev->bsf(1)) {
+ Pmsg1(0, _("Backspace file failed! ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
}
- Pmsg0(0, "Backspaced over EOF OK.\n");
- if (!bsr_dev(dev, 1)) {
- Pmsg1(0, _("Backspace record failed! ERR=%s\n"), strerror_dev(dev));
+ Pmsg0(0, _("Backspaced over EOF OK.\n"));
+ if (!dev->bsr(1)) {
+ Pmsg1(0, _("Backspace record failed! ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
- Pmsg0(0, "Backspace record OK.\n");
+ Pmsg0(0, _("Backspace record OK.\n"));
if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
berrno be;
- Pmsg1(0, _("Read block failed! ERR=%s\n"), be.strerror(dev->dev_errno));
+ Pmsg1(0, _("Read block failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));
goto bail_out;
}
memset(rec->data, 0, rec->data_len);
- if (!read_record_from_block(block, rec)) {
+ if (!read_record_from_block(dcr, block, rec)) {
berrno be;
- Pmsg1(0, _("Read block failed! ERR=%s\n"), be.strerror(dev->dev_errno));
+ Pmsg1(0, _("Read block failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));
goto bail_out;
}
for (int i=0; i<len; i++) {
"This is an *essential* feature ...\n\n"));
block = dcr->block;
rec = new_record();
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
rec->data = check_pool_memory_size(rec->data, block->buf_len);
}
Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
weofcmd();
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
goto bail_out;
} else {
- Pmsg0(0, "Rewind OK.\n");
+ Pmsg0(0, _("Rewind OK.\n"));
}
for (i=1; i<=2000; i++) {
read_again:
goto read_again;
}
}
- Pmsg2(0, _("Read block %d failed! ERR=%s\n"), i, be.strerror(dev->dev_errno));
+ Pmsg2(0, _("Read block %d failed! ERR=%s\n"), i, be.bstrerror(dev->dev_errno));
goto bail_out;
}
memset(rec->data, 0, rec->data_len);
- if (!read_record_from_block(block, rec)) {
+ if (!read_record_from_block(dcr, block, rec)) {
berrno be;
- Pmsg2(0, _("Read record failed. Block %d! ERR=%s\n"), i, be.strerror(dev->dev_errno));
+ Pmsg2(0, _("Read record failed. Block %d! ERR=%s\n"), i, be.bstrerror(dev->dev_errno));
goto bail_out;
}
p = (int *)rec->data;
"This is an *essential* feature ...\n\n"));
empty_block(block);
rec = new_record();
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
rec->data = check_pool_memory_size(rec->data, block->buf_len);
}
Pmsg1(0, _("Wrote 1000 blocks of %d bytes.\n"), rec->data_len);
weofcmd();
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
goto bail_out;
} else {
- Pmsg0(0, "Rewind OK.\n");
+ Pmsg0(0, _("Rewind OK.\n"));
}
while(ok) {
ok = false;
continue;
}
- Pmsg2(-1, "Reposition to file:block %d:%d\n", file, blk);
- if (!reposition_dev(dev, file, blk)) {
- Pmsg0(0, "Reposition error.\n");
+ Pmsg2(-1, _("Reposition to file:block %d:%d\n"), file, blk);
+ if (!dev->reposition(dcr, file, blk)) {
+ Pmsg0(0, _("Reposition error.\n"));
goto bail_out;
}
read_again:
}
}
Pmsg4(0, _("Read block %d failed! file=%d blk=%d. ERR=%s\n\n"),
- recno, file, blk, be.strerror(dev->dev_errno));
+ recno, file, blk, be.bstrerror(dev->dev_errno));
Pmsg0(0, _("This may be because the tape drive block size is not\n"
" set to variable blocking as normally used by Bacula.\n"
" Please see the Tape Testing chapter in the manual and \n"
goto bail_out;
}
memset(rec->data, 0, rec->data_len);
- if (!read_record_from_block(block, rec)) {
+ if (!read_record_from_block(dcr, block, rec)) {
berrno be;
- Pmsg1(0, _("Read record failed! ERR=%s\n"), be.strerror(dev->dev_errno));
+ Pmsg1(0, _("Read record failed! ERR=%s\n"), be.bstrerror(dev->dev_errno));
goto bail_out;
}
p = (int *)rec->data;
wrcmd();
wrcmd();
weofcmd(); /* end file 2 */
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
- force_close_device(dev); /* release device */
+ dev->close(); /* release device */
if (!open_the_device()) {
return -1;
}
rewindcmd();
Pmsg0(0, _("Now moving to end of medium.\n"));
eodcmd();
- Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"),
- dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+ dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 3) {
return -1;
Pmsg0(-1, _("\nNow the important part, I am going to attempt to append to the tape.\n\n"));
wrcmd();
weofcmd();
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
rewindcmd();
Pmsg0(-1, _("Done appending, there should be no I/O errors\n\n"));
- Pmsg0(-1, "Doing Bacula scan of blocks:\n");
+ Pmsg0(-1, _("Doing Bacula scan of blocks:\n"));
scan_blocks();
Pmsg0(-1, _("End scanning the tape.\n"));
- Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"),
- dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+ dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 4) {
return -2;
int sleep_time = 0;
Dmsg1(100, "Max changer wait = %d sec\n", timeout);
- if (!dev_cap(dev, CAP_AUTOCHANGER)) {
+ if (!dev->has_cap(CAP_AUTOCHANGER)) {
return 1;
}
if (!(dcr->device && dcr->device->changer_name && dcr->device->changer_command)) {
- Pmsg0(-1, "\nAutochanger enabled, but no name or no command device specified.\n");
+ Pmsg0(-1, _("\nAutochanger enabled, but no name or no command device specified.\n"));
return 1;
}
- Pmsg0(-1, "\nAh, I see you have an autochanger configured.\n"
+ Pmsg0(-1, _("\nAh, I see you have an autochanger configured.\n"
"To test the autochanger you must have a blank tape\n"
- " that I can write on in Slot 1.\n");
- if (!get_cmd("\nDo you wish to continue with the Autochanger test? (y/n): ")) {
+ " that I can write on in Slot 1.\n"));
+ if (!get_cmd(_("\nDo you wish to continue with the Autochanger test? (y/n): "))) {
return 0;
}
if (cmd[0] != 'y' && cmd[0] != 'Y') {
} else {
berrno be;
Pmsg1(-1, _("3991 Bad autochanger command: %s\n"), changer);
- Pmsg2(-1, _("3991 result=\"%s\": ERR=%s\n"), results, be.strerror(status));
+ Pmsg2(-1, _("3991 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));
goto bail_out;
}
if (loaded) {
- Pmsg1(-1, "Slot %d loaded. I am going to unload it.\n", loaded);
+ Pmsg1(-1, _("Slot %d loaded. I am going to unload it.\n"), loaded);
} else {
- Pmsg0(-1, "Nothing loaded in the drive. OK.\n");
+ Pmsg0(-1, _("Nothing loaded in the drive. OK.\n"));
}
Dmsg1(100, "Results from loaded query=%s\n", results);
if (loaded) {
dcr->VolCatInfo.Slot = loaded;
- offline_or_rewind_dev(dev);
/* We are going to load a new tape, so close the device */
- force_close_device(dev);
+ dev->close();
Pmsg2(-1, _("3302 Issuing autochanger \"unload %d %d\" command.\n"),
loaded, dev->drive_index);
changer = edit_device_codes(dcr, changer,
dcr->device->changer_command, "unload");
status = run_program(changer, timeout, results);
- Pmsg2(-1, "unload status=%s %d\n", status==0?"OK":"Bad", status);
+ Pmsg2(-1, _("unload status=%s %d\n"), status==0?_("OK"):_("Bad"), status);
if (status != 0) {
berrno be;
Pmsg1(-1, _("3992 Bad autochanger command: %s\n"), changer);
- Pmsg2(-1, _("3992 result=\"%s\": ERR=%s\n"), results, be.strerror(status));
+ Pmsg2(-1, _("3992 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));
}
}
changer = edit_device_codes(dcr, changer,
dcr->device->changer_command, "load");
Dmsg1(100, "Changer=%s\n", changer);
- force_close_device(dev);
+ dev->close();
status = run_program(changer, timeout, results);
if (status == 0) {
Pmsg2(-1, _("3303 Autochanger \"load %d %d\" status is OK.\n"),
} else {
berrno be;
Pmsg1(-1, _("3993 Bad autochanger command: %s\n"), changer);
- Pmsg2(-1, _("3993 result=\"%s\": ERR=%s\n"), results, be.strerror(status));
+ Pmsg2(-1, _("3993 result=\"%s\": ERR=%s\n"), results, be.bstrerror(status));
goto bail_out;
}
* a failure.
*/
bmicrosleep(sleep_time, 0);
- if (!rewind_dev(dev) || weof_dev(dev,1) < 0) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
- clrerror_dev(dev, -1);
- Pmsg0(-1, "\nThe test failed, probably because you need to put\n"
+ if (!dev->rewind(dcr) || !dev->weof(1)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), dev->bstrerror());
+ dev->clrerror(-1);
+ Pmsg0(-1, _("\nThe test failed, probably because you need to put\n"
"a longer sleep time in the mtx-script in the load) case.\n"
- "Adding a 30 second sleep and trying again ...\n");
+ "Adding a 30 second sleep and trying again ...\n"));
sleep_time += 30;
goto try_again;
} else {
- Pmsg1(0, "Rewound %s\n", dev->print_name());
+ Pmsg1(0, _("Rewound %s\n"), dev->print_name());
}
- if ((status = weof_dev(dev, 1)) < 0) {
- Pmsg2(0, "Bad status from weof %d. ERR=%s\n", status, strerror_dev(dev));
+ if (!dev->weof(1)) {
+ Pmsg1(0, _("Bad status from weof. ERR=%s\n"), dev->bstrerror());
goto bail_out;
} else {
- Pmsg1(0, "Wrote EOF to %s\n", dev->print_name());
+ Pmsg1(0, _("Wrote EOF to %s\n"), dev->print_name());
}
if (sleep_time) {
- Pmsg1(-1, "\nThe test worked this time. Please add:\n\n"
+ Pmsg1(-1, _("\nThe test worked this time. Please add:\n\n"
" sleep %d\n\n"
- "to your mtx-changer script in the load) case.\n\n",
+ "to your mtx-changer script in the load) case.\n\n"),
sleep_time);
} else {
- Pmsg0(-1, "\nThe test autochanger worked!!\n\n");
+ Pmsg0(-1, _("\nThe test autochanger worked!!\n\n"));
}
free_pool_memory(changer);
bail_out:
free_pool_memory(changer);
free_pool_memory(results);
- Pmsg0(-1, "You must correct this error or the Autochanger will not work.\n");
+ Pmsg0(-1, _("You must correct this error or the Autochanger will not work.\n"));
return -2;
}
weofcmd(); /* end file 3 */
wrcmd();
weofcmd(); /* end file 4 */
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
test_again:
rewindcmd();
Pmsg0(0, _("Now forward spacing 1 file.\n"));
- if (!fsf_dev(dev, 1)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(1)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 1. I am at file %d. This is %s\n"),
- dev->file, dev->file == 1 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 1. I am at file %d. %s\n"),
+ dev->file, dev->file == 1 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 1) {
goto bail_out;
}
Pmsg0(0, _("Now forward spacing 2 files.\n"));
- if (!fsf_dev(dev, 2)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(2)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"),
- dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+ dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 3) {
goto bail_out;
rewindcmd();
Pmsg0(0, _("Now forward spacing 4 files.\n"));
- if (!fsf_dev(dev, 4)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(4)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"),
- dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+ dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 4) {
goto bail_out;
}
if (set_off) {
- Pmsg0(-1, "The test worked this time. Please add:\n\n"
+ Pmsg0(-1, _("The test worked this time. Please add:\n\n"
" Fast Forward Space File = no\n\n"
- "to your Device resource for this drive.\n");
+ "to your Device resource for this drive.\n"));
}
Pmsg0(-1, "\n");
Pmsg0(0, _("Now forward spacing 1 more file.\n"));
- if (!fsf_dev(dev, 1)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(1)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());
}
- Pmsg2(-1, _("We should be in file 5. I am at file %d. This is %s\n"),
- dev->file, dev->file == 5 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 5. I am at file %d. %s\n"),
+ dev->file, dev->file == 5 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 5) {
goto bail_out;
}
bail_out:
Pmsg0(-1, _("\nThe forward space file test failed.\n"));
- if (dev_cap(dev, CAP_FASTFSF)) {
- Pmsg0(-1, "You have Fast Forward Space File enabled.\n"
- "I am turning it off then retrying the test.\n");
- dev->capabilities &= ~CAP_FASTFSF;
+ if (dev->has_cap(CAP_FASTFSF)) {
+ Pmsg0(-1, _("You have Fast Forward Space File enabled.\n"
+ "I am turning it off then retrying the test.\n"));
+ dev->clear_cap(CAP_FASTFSF);
set_off = true;
goto test_again;
}
- Pmsg0(-1, "You must correct this error or Bacula will not work.\n"
+ Pmsg0(-1, _("You must correct this error or Bacula will not work.\n"
"Some systems, e.g. OpenBSD, require you to set\n"
" Use MTIOCGET= no\n"
- "in your device resource. Use with caution.\n");
+ "in your device resource. Use with caution.\n"));
return -2;
}
goto all_done;
}
if (stat == -1) { /* first test failed */
- if (dev_cap(dev, CAP_EOM) || dev_cap(dev, CAP_FASTFSF)) {
- Pmsg0(-1, "\nAppend test failed. Attempting again.\n"
+ if (dev->has_cap(CAP_EOM) || dev->has_cap(CAP_FASTFSF)) {
+ Pmsg0(-1, _("\nAppend test failed. Attempting again.\n"
"Setting \"Hardware End of Medium = no\n"
" and \"Fast Forward Space File = no\n"
- "and retrying append test.\n\n");
- dev->capabilities &= ~CAP_EOM; /* turn off eom */
- dev->capabilities &= ~CAP_FASTFSF; /* turn off fast fsf */
+ "and retrying append test.\n\n"));
+ dev->clear_cap(CAP_EOM); /* turn off eom */
+ dev->clear_cap(CAP_FASTFSF); /* turn off fast fsf */
stat = append_test();
if (stat == 1) {
- Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+ Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n\n"
" Fast Forward Space File = No\n"
- "to your Device resource in the Storage conf file.\n");
+ "to your Device resource in the Storage conf file.\n"));
goto all_done;
}
if (stat == -1) {
- Pmsg0(-1, "\n\nThat appears *NOT* to have corrected the problem.\n");
+ Pmsg0(-1, _("\n\nThat appears *NOT* to have corrected the problem.\n"));
goto failed;
}
/* Wrong count after append */
if (stat == -2) {
- Pmsg0(-1, "\n\nIt looks like the append failed. Attempting again.\n"
- "Setting \"BSF at EOM = yes\" and retrying append test.\n");
+ Pmsg0(-1, _("\n\nIt looks like the append failed. Attempting again.\n"
+ "Setting \"BSF at EOM = yes\" and retrying append test.\n"));
dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
stat = append_test();
if (stat == 1) {
- Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+ Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n"
" Fast Forward Space File = No\n"
" BSF at EOM = yes\n\n"
- "to your Device resource in the Storage conf file.\n");
+ "to your Device resource in the Storage conf file.\n"));
goto all_done;
}
}
}
failed:
- Pmsg0(-1, "\nAppend test failed.\n\n");
- Pmsg0(-1, "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+ Pmsg0(-1, _("\nAppend test failed.\n\n"
+ "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
"Unable to correct the problem. You MUST fix this\n"
- "problem before Bacula can use your tape drive correctly\n");
- Pmsg0(-1, "\nPerhaps running Bacula in fixed block mode will work.\n"
+ "problem before Bacula can use your tape drive correctly\n"
+ "\nPerhaps running Bacula in fixed block mode will work.\n"
"Do so by setting:\n\n"
"Minimum Block Size = nnn\n"
"Maximum Block Size = nnn\n\n"
"\n"
"Some systems, e.g. OpenBSD, require you to set\n"
" Use MTIOCGET= no\n"
- "in your device resource. Use with caution.\n");
+ "in your device resource. Use with caution.\n"));
return;
}
"1 block of 64448 bytes in file 4\n"
"End of File mark.\n"
"Total files=4, blocks=7, bytes = 451,136\n"
- "=== End sample correct output ===\n\n"));
-
- Pmsg0(-1, _("If the above scan output is not identical to the\n"
- "sample output, you MUST correct the problem\n"
- "or Bacula will not be able to write multiple Jobs to \n"
- "the tape.\n\n"));
+ "=== End sample correct output ===\n\n"
+ "If the above scan output is not identical to the\n"
+ "sample output, you MUST correct the problem\n"
+ "or Bacula will not be able to write multiple Jobs to \n"
+ "the tape.\n\n"));
if (stat == 1) {
re_read_block_test();
if (num <= 0) {
num = 1;
}
- if (!fsf_dev(dev, num)) {
- Pmsg1(0, "Bad status from fsf. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(num)) {
+ Pmsg1(0, _("Bad status from fsf. ERR=%s\n"), dev->bstrerror());
return;
}
- Pmsg2(0, "Forward spaced %d file%s.\n", num, num==1?"":"s");
+ if (num == 1) {
+ Pmsg0(0, _("Forward spaced 1 file.\n"));
+ }
+ else {
+ Pmsg1(0, _("Forward spaced %d files.\n"), num);
+ }
}
/* Forward space a record */
num = 1;
}
if (!dev->fsr(num)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), dev->bstrerror());
return;
}
- Pmsg2(0, "Forward spaced %d record%s.\n", num, num==1?"":"s");
+ if (num == 1) {
+ Pmsg0(0, _("Forward spaced 1 record.\n"));
+ }
+ else {
+ Pmsg1(0, _("Forward spaced %d records.\n"), num);
+ }
}
+/*
+ * Read a Bacula block from the tape
+ */
+static void rbcmd()
+{
+ dev->open(dcr, OPEN_READ_ONLY);
+ read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK);
+}
/*
* Write a Bacula block to the tape
DEV_RECORD *rec = dcr->rec;
int i;
+ if (!dev->is_open()) {
+ open_the_device();
+ }
sm_check(__FILE__, __LINE__, false);
empty_block(block);
if (verbose > 1) {
char *buf;
int stat, len;
- if (!get_cmd("Enter length to read: ")) {
+ if (!get_cmd(_("Enter length to read: "))) {
return;
}
len = atoi(cmd);
len = 1024;
}
buf = (char *)malloc(len);
- stat = read(dev->fd, buf, len);
+ stat = read(dev->fd(), buf, len);
if (stat > 0 && stat <= len) {
errno = 0;
}
berrno be;
Pmsg3(0, _("Read of %d bytes gives stat=%d. ERR=%s\n"),
- len, stat, be.strerror());
+ len, stat, be.bstrerror());
free(buf);
}
blocks = block_size = tot_blocks = 0;
bytes = 0;
if (dev->state & ST_EOT) {
- Pmsg0(0, "End of tape\n");
+ Pmsg0(0, _("End of tape\n"));
return;
}
- update_pos_dev(dev);
+ dev->update_pos(dcr);
tot_files = dev->file;
Pmsg1(0, _("Starting scan at file %u\n"), dev->file);
for (;;) {
- if ((stat = read(dev->fd, buf, sizeof(buf))) < 0) {
+ if ((stat = read(dev->fd(), buf, sizeof(buf))) < 0) {
berrno be;
- clrerror_dev(dev, -1);
- Mmsg2(dev->errmsg, "read error on %s. ERR=%s.\n",
- dev->dev_name, be.strerror());
- Pmsg2(0, "Bad status from read %d. ERR=%s\n", stat, strerror_dev(dev));
- if (blocks > 0)
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ dev->clrerror(-1);
+ Mmsg2(dev->errmsg, _("read error on %s. ERR=%s.\n"),
+ dev->dev_name, be.bstrerror());
+ Pmsg2(0, _("Bad status from read %d. ERR=%s\n"), stat, dev->bstrerror());
+ if (blocks > 0) {
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
+ }
return;
}
Dmsg1(200, "read status = %d\n", stat);
/* sleep(1); */
if (stat != block_size) {
- update_pos_dev(dev);
+ dev->update_pos(dcr);
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
block_size = stat;
}
if (stat == 0) { /* EOF */
- update_pos_dev(dev);
- printf("End of File mark.\n");
+ dev->update_pos(dcr);
+ printf(_("End of File mark.\n"));
/* Two reads of zero means end of tape */
if (dev->state & ST_EOF)
dev->state |= ST_EOT;
dev->file++;
}
if (dev->state & ST_EOT) {
- printf("End of tape\n");
+ printf(_("End of tape\n"));
break;
}
} else { /* Got data */
bytes += stat;
}
}
- update_pos_dev(dev);
+ dev->update_pos(dcr);
tot_files = dev->file - tot_files;
- printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks,
+ printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,
edit_uint64_with_commas(bytes, ec1));
}
uint64_t bytes;
DEV_BLOCK *block = dcr->block;
char ec1[50];
+ char buf1[100], buf2[100];
blocks = block_size = tot_blocks = 0;
bytes = 0;
empty_block(block);
- update_pos_dev(dev);
+ dev->update_pos(dcr);
tot_files = dev->file;
for (;;) {
if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
- Dmsg1(100, "!read_block(): ERR=%s\n", strerror_dev(dev));
+ Dmsg1(100, "!read_block(): ERR=%s\n", dev->bstrerror());
if (dev->state & ST_EOT) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
goto bail_out;
}
if (dev->state & ST_EOF) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
printf(_("End of File mark.\n"));
}
if (dev->state & ST_SHORT) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
printf(_("Short block read.\n"));
continue;
}
- printf(_("Error reading block. ERR=%s\n"), strerror_dev(dev));
+ printf(_("Error reading block. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
if (block->block_len != block_size) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
block_size = block->block_len;
block->VolSessionId, block->VolSessionTime);
if (verbose == 1) {
DEV_RECORD *rec = new_record();
- read_record_from_block(block, rec);
- Pmsg8(-1, "Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n",
+ read_record_from_block(dcr, block, rec);
+ Pmsg8(-1, _("Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n"),
block->BlockNumber, dev->block_num, block->block_len,
- FI_to_ascii(rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
- stream_to_ascii(rec->Stream, rec->FileIndex), rec->data_len);
+ FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
+ stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
rec->remainder = 0;
free_record(rec);
} else if (verbose > 1) {
}
bail_out:
tot_files = dev->file - tot_files;
- printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks,
+ printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,
edit_uint64_with_commas(bytes, ec1));
}
{
int debug = debug_level;
debug_level = 30;
- Pmsg2(0, "Device status: %u. ERR=%s\n", status_dev(dev), strerror_dev(dev));
+ Pmsg2(0, _("Device status: %u. ERR=%s\n"), status_dev(dev), dev->bstrerror());
#ifdef xxxx
dump_volume_label(dev);
#endif
DEV_RECORD rec;
DEV_BLOCK *block = dcr->block;
char ec1[50];
+ char buf1[100], buf2[100];
int fd;
uint32_t i;
uint32_t min_block_size;
+ struct tm tm;
ok = true;
stop = 0;
last_block_num = 0;
BlockNumber = 0;
- Pmsg0(-1, "\n"
+ Pmsg0(-1, _("\n"
"This command simulates Bacula writing to a tape.\n"
"It requires either one or two blank tapes, which it\n"
"will label and write.\n\n"
"fills, it will ask for a second, and after writing a few more \n"
"blocks, it will stop. Then it will begin re-reading the\n"
"two tapes.\n\n"
-"This may take a long time -- hours! ...\n\n");
+"This may take a long time -- hours! ...\n\n"));
- get_cmd("Do you want to run the simplified test (s) with one tape\n"
- "or the complete multiple tape (m) test: (s/m) ");
+ get_cmd(_("Do you want to run the simplified test (s) with one tape\n"
+ "or the complete multiple tape (m) test: (s/m) "));
if (cmd[0] == 's') {
- Pmsg0(-1, "Simple test (single tape) selected.\n");
+ Pmsg0(-1, _("Simple test (single tape) selected.\n"));
simple = true;
} else if (cmd[0] == 'm') {
- Pmsg0(-1, "Multiple tape test selected.\n");
+ Pmsg0(-1, _("Multiple tape test selected.\n"));
simple = false;
} else {
- Pmsg0(000, "Command aborted.\n");
+ Pmsg0(000, _("Command aborted.\n"));
return;
}
min_block_size = dev->min_block_size;
dev->min_block_size = dev->max_block_size;
set_volume_name("TestVolume1", 1);
-
- if (!dev->rewind()) {
- Pmsg0(000, "Rewind failed.\n");
- }
- if (!dev->weof()) {
- Pmsg0(000, "Write EOF failed.\n");
- }
- labelcmd();
+ dir_ask_sysop_to_create_appendable_volume(dcr);
dev->set_append(); /* force volume to be relabeled */
/*
if (!write_session_label(dcr, SOS_LABEL)) {
set_jcr_job_status(jcr, JS_ErrorTerminated);
Jmsg1(jcr, M_FATAL, 0, _("Write session label failed. ERR=%s\n"),
- strerror_dev(dev));
+ dev->bstrerror());
ok = false;
}
- Pmsg0(-1, "Wrote Start of Session label.\n");
+ Pmsg0(-1, _("Wrote Start of Session label.\n"));
memset(&rec, 0, sizeof(rec));
rec.data = get_memory(100000); /* max record size */
* Put some random data in the record
*/
fd = open("/dev/urandom", O_RDONLY);
- if (fd) {
+ if (fd != -1) {
read(fd, rec.data, rec.data_len);
close(fd);
} else {
*/
jcr->dcr->VolFirstIndex = 0;
time(&jcr->run_time); /* start counting time for rates */
+ (void)localtime_r(&jcr->run_time, &tm);
+ strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);
if (simple) {
- Pmsg0(-1, "Begin writing Bacula records to tape ...\n");
+ Pmsg1(-1, _("%s Begin writing Bacula records to tape ...\n"), buf1);
} else {
- Pmsg0(-1, "Begin writing Bacula records to first tape ...\n");
+ Pmsg1(-1, _("%s Begin writing Bacula records to first tape ...\n"), buf1);
}
for (file_index = 0; ok && !job_canceled(jcr); ) {
rec.VolSessionId = jcr->VolSessionId;
}
Dmsg4(250, "before write_rec FI=%d SessId=%d Strm=%s len=%d\n",
- rec.FileIndex, rec.VolSessionId, stream_to_ascii(rec.Stream, rec.FileIndex),
+ rec.FileIndex, rec.VolSessionId,
+ stream_to_ascii(buf1, rec.Stream, rec.FileIndex),
rec.data_len);
while (!write_record_to_block(block, &rec)) {
now = 1; /* prevent divide error */
}
kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
- Pmsg4(-1, "Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n",
+ Pmsg4(-1, _("Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n"),
block->BlockNumber, dev->block_num,
edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
}
- /* Every 15000 blocks (approx 1GB) write an EOF.
+ /* Every 32000 blocks (approx 2GB) write an EOF.
*/
- if ((block->BlockNumber % 15000) == 0) {
- Pmsg0(-1, "Flush block, write EOF\n");
+ if ((block->BlockNumber % 32000) == 0) {
+ now = time(NULL);
+ (void)localtime_r(&now, &tm);
+ strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);
+ Pmsg1(-1, _("%s Flush block, write EOF\n"), buf1);
flush_block(block, 0);
- weof_dev(dev, 1);
+ dev->weof(1);
}
/* Get out after writing 10 blocks to the second tape */
}
jcr->JobBytes += rec.data_len; /* increment bytes this job */
Dmsg4(190, "write_record FI=%s SessId=%d Strm=%s len=%d\n",
- FI_to_ascii(rec.FileIndex), rec.VolSessionId,
- stream_to_ascii(rec.Stream, rec.FileIndex), rec.data_len);
+ FI_to_ascii(buf1, rec.FileIndex), rec.VolSessionId,
+ stream_to_ascii(buf2, rec.Stream, rec.FileIndex), rec.data_len);
/* Get out after writing 10 blocks to the second tape */
if (BlockNumber > 10 && stop != 0) { /* get out */
- Pmsg0(-1, "Done writing ...\n");
+ char ed1[50];
+ Pmsg1(-1, "Done writing %s records ...\n",
+ edit_uint64_with_commas(write_count, ed1));
break;
}
}
set_jcr_job_status(jcr, JS_ErrorTerminated);
}
if (!write_session_label(dcr, EOS_LABEL)) {
- Pmsg1(000, _("Error writting end session label. ERR=%s\n"), strerror_dev(dev));
+ Pmsg1(000, _("Error writting end session label. ERR=%s\n"), dev->bstrerror());
ok = false;
}
/* Write out final block of this session */
write(fd, last_block2->buf, last_block2->buf_len);
write(fd, first_block->buf, first_block->buf_len);
close(fd);
- Pmsg2(-1, "Wrote state file last_block_num1=%d last_block_num2=%d\n",
+ Pmsg2(-1, _("Wrote state file last_block_num1=%d last_block_num2=%d\n"),
last_block_num1, last_block_num2);
} else {
berrno be;
Pmsg2(-1, _("Could not create state file: %s ERR=%s\n"), buf,
- be.strerror());
+ be.bstrerror());
}
- Pmsg4(-1, _("\n\nDone filling tape%s at %d:%d. Now beginning re-read of %stape ...\n"),
- simple?"":"s", jcr->dcr->dev->file, jcr->dcr->dev->block_num, simple?"":"first ");
+ now = time(NULL);
+ (void)localtime_r(&now, &tm);
+ strftime(buf1, sizeof(buf1), "%H:%M:%S", &tm);
+ if (simple) {
+ Pmsg3(-1, _("\n\n%s Done filling tape at %d:%d. Now beginning re-read of tape ...\n"),
+ buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);
+ }
+ else {
+ Pmsg3(-1, _("\n\n%s Done filling tapes at %d:%d. Now beginning re-read of first tape ...\n"),
+ buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);
+ }
jcr->dcr->block = block;
do_unfill();
read(fd, first_block->buf, first_block->buf_len);
close(fd);
if (state_level != btape_state_level) {
- Pmsg0(-1, "\nThe state file level has changed. You must redo\n"
- "the fill command.\n");
+ Pmsg0(-1, _("\nThe state file level has changed. You must redo\n"
+ "the fill command.\n"));
return;
}
} else {
berrno be;
- Pmsg2(-1, "\nCould not find the state file: %s ERR=%s\n"
- "You must redo the fill command.\n", buf, be.strerror());
+ Pmsg2(-1, _("\nCould not find the state file: %s ERR=%s\n"
+ "You must redo the fill command.\n"), buf, be.bstrerror());
return;
}
do_unfill();
static void do_unfill()
{
DEV_BLOCK *block = dcr->block;
- bool autochanger;
+ int autochanger;
dumped = 0;
VolBytes = 0;
LastBlock = 0;
Dmsg0(20, "Enter do_unfill\n");
- dev->capabilities |= CAP_ANONVOLS; /* allow reading any volume */
- dev->capabilities &= ~CAP_LABEL; /* don't label anything here */
+ dev->set_cap(CAP_ANONVOLS); /* allow reading any volume */
+ dev->clear_cap(CAP_LABEL); /* don't label anything here */
end_of_tape = 0;
file_index = 0;
if (last_block) {
free_block(last_block);
+ last_block = NULL;
}
last_block_num = last_block_num1;
last_file = last_file1;
last_block = last_block1;
+ free_restore_volume_list(jcr);
+ jcr->bsr = NULL;
+ bstrncpy(dcr->VolumeName, "TestVolume1|TestVolume2", sizeof(dcr->VolumeName));
+ create_restore_volume_list(jcr);
+ if (jcr->VolList != NULL) {
+ jcr->VolList->Slot = 1;
+ if (jcr->VolList->next != NULL) {
+ jcr->VolList->next->Slot = 2;
+ }
+ }
+
+ set_volume_name("TestVolume1", 1);
+
if (!simple) {
/* Multiple Volume tape */
/* Close device so user can use autochanger if desired */
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
+ if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+ dev->offline();
}
autochanger = autoload_device(dcr, 1, NULL);
- if (!autochanger) {
- force_close_device(dev);
+ if (autochanger != 1) {
+ dev->close();
get_cmd(_("Mount first tape. Press enter when ready: "));
}
- free_restore_volume_list(jcr);
- jcr->dcr = new_dcr(jcr, dev);
- set_volume_name("TestVolume1", 1);
- jcr->bsr = NULL;
- create_restore_volume_list(jcr);
- close_device(dev);
- dev->state &= ~(ST_READ|ST_APPEND);
- dev->num_writers = 0;
- if (!acquire_device_for_read(dcr)) {
- Pmsg1(-1, "%s", dev->errmsg);
- goto bail_out;
- }
+ }
+
+ dev->close();
+ dev->num_writers = 0;
+ if (!acquire_device_for_read(dcr)) {
+ Pmsg1(-1, "%s", dev->errmsg);
+ goto bail_out;
}
/*
* We now have the first tape mounted.
* Note, re-reading last block may have caused us to
* loose track of where we are (block number unknown).
*/
- if (!rewind_dev(dev)) { /* get to a known place on tape */
+ Pmsg0(-1, _("Rewinding.\n"));
+ if (!dev->rewind(dcr)) { /* get to a known place on tape */
goto bail_out;
}
/* Read the first 10000 records */
- Pmsg0(-1, _("Reading the first 10000 records.\n"));
+ Pmsg2(-1, _("Reading the first 10000 records from %u:%u.\n"),
+ dev->file, dev->block_num);
quickie_count = 0;
read_records(dcr, quickie_cb, my_mount_next_read_volume);
Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
last_file, last_block_num);
- if (!reposition_dev(dev, last_file, last_block_num)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ if (!dev->reposition(dcr, last_file, last_block_num)) {
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
Pmsg1(-1, _("Reading block %u.\n"), last_block_num);
if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
- Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+ Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
if (compare_blocks(last_block, block)) {
/* Multiple Volume tape */
/* Close device so user can use autochanger if desired */
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
+ if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+ dev->offline();
}
- free_restore_volume_list(jcr);
set_volume_name("TestVolume2", 2);
- jcr->bsr = NULL;
- create_restore_volume_list(jcr);
+
autochanger = autoload_device(dcr, 1, NULL);
- if (!autochanger) {
- force_close_device(dev);
+ if (autochanger != 1) {
+ dev->close();
get_cmd(_("Mount second tape. Press enter when ready: "));
}
* on the previous tape.
*/
Pmsg2(-1, _("Reposition from %u:%u to 0:1\n"), dev->file, dev->block_num);
- if (!reposition_dev(dev, 0, 1)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ if (!dev->reposition(dcr, 0, 1)) {
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
- Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+ Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
if (compare_blocks(first_block, block)) {
/* Now find and compare the last block */
Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
last_file, last_block_num);
- if (!reposition_dev(dev, last_file, last_block_num)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ if (!dev->reposition(dcr, last_file, last_block_num)) {
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
if (!read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK)) {
- Pmsg1(-1, _("Error reading block: ERR=%s\n"), strerror_dev(dev));
+ Pmsg1(-1, _("Error reading block: ERR=%s\n"), dev->bstrerror());
goto bail_out;
}
if (compare_blocks(last_block, block)) {
static bool quickie_cb(DCR *dcr, DEV_RECORD *rec)
{
DEVICE *dev = dcr->dev;
- if (dev->file != 0) {
- Pmsg3(-1, "ERROR! device at %d:%d count=%d\n", dev->file, dev->block_num,
- quickie_count);
- return false;
- }
quickie_count++;
if (quickie_count == 10000) {
- Pmsg2(-1, "1000 records read now at %d:%d\n", dev->file, dev->block_num);
+ Pmsg2(-1, _("10000 records read now at %d:%d\n"), dev->file, dev->block_num);
}
return quickie_count < 10000;
}
dump_block(last_block, _("Last block written"));
Pmsg0(-1, "\n");
dump_block(block, _("Block read back"));
- Pmsg1(-1, "\n\nThe blocks differ at byte %u\n", p - last_block->buf);
- Pmsg0(-1, "\n\n!!!! The last block written and the block\n"
+ Pmsg1(-1, _("\n\nThe blocks differ at byte %u\n"), p - last_block->buf);
+ Pmsg0(-1, _("\n\n!!!! The last block written and the block\n"
"that was read back differ. The test FAILED !!!!\n"
"This must be corrected before you use Bacula\n"
- "to write multi-tape Volumes.!!!!\n");
+ "to write multi-tape Volumes.!!!!\n"));
return false;
}
if (verbose) {
DEV_BLOCK *tblock;
uint32_t this_file, this_block_num;
- lock_device(dev);
+ dev->r_dlock();
if (!this_block) {
this_block = new_block(dev);
}
this_file = dev->file;
this_block_num = dev->block_num;
if (!write_block_to_dev(dcr)) {
- Pmsg3(000, "Last block at: %u:%u this_dev_block_num=%d\n",
+ Pmsg3(000, _("Last block at: %u:%u this_dev_block_num=%d\n"),
last_file, last_block_num, this_block_num);
if (vol_num == 1) {
/*
first_block = dup_block(block); /* first block second tape */
}
if (verbose) {
- Pmsg3(000, "Block not written: FileIndex=%u blk_block=%u Size=%u\n",
+ Pmsg3(000, _("Block not written: FileIndex=%u blk_block=%u Size=%u\n"),
(unsigned)file_index, block->BlockNumber, block->block_len);
- dump_block(last_block, "Last block written");
+ dump_block(last_block, _("Last block written"));
Pmsg0(-1, "\n");
- dump_block(block, "Block not written");
+ dump_block(block, _("Block not written"));
}
if (stop == 0) {
eot_block = block->BlockNumber;
}
kbs = (double)dev->VolCatInfo.VolCatBytes / (1000 * now);
vol_size = dev->VolCatInfo.VolCatBytes;
- Pmsg4(000, "End of tape %d:%d. VolumeCapacity=%s. Write rate = %.1f KB/s\n",
+ Pmsg4(000, _("End of tape %d:%d. VolumeCapacity=%s. Write rate = %.1f KB/s\n"),
dev->file, dev->block_num,
edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);
} else {
/* Full test in progress */
if (!fixup_device_block_write_error(jcr->dcr)) {
- Pmsg1(000, _("Cannot fixup device error. %s\n"), strerror_dev(dev));
+ Pmsg1(000, _("Cannot fixup device error. %s\n"), dev->bstrerror());
ok = false;
- unlock_device(dev);
+ dev->dunlock();
return 0;
}
BlockNumber = 0; /* start counting for second tape */
}
- unlock_device(dev);
+ dev->dunlock();
return 1; /* end of tape reached */
}
last_file = this_file;
last_block_num = this_block_num;
- unlock_device(dev);
+ dev->dunlock();
return 1;
}
DEV_RECORD *rec = dcr->rec;
int i, count;
- Pmsg0(0, "Test writing blocks of 64512 bytes to tape.\n");
+ Pmsg0(0, _("Test writing blocks of 64512 bytes to tape.\n"));
- get_cmd("How many blocks do you want to write? (1000): ");
+ get_cmd(_("How many blocks do you want to write? (1000): "));
count = atoi(cmd);
if (count <= 0) {
memset(rec->data, i & 0xFF, i);
rec->data_len = i;
rewindcmd();
- Pmsg1(0, "Begin writing %d Bacula blocks to tape ...\n", count);
+ Pmsg1(0, _("Begin writing %d Bacula blocks to tape ...\n"), count);
for (i=0; i < count; i++) {
if (i % 100 == 0) {
printf("+");
}
printf("\n");
weofcmd();
- if (dev_cap(dev, CAP_TWOEOF)) {
+ if (dev->has_cap(CAP_TWOEOF)) {
weofcmd();
}
rewindcmd();
}
}
p = (uint32_t *)block->buf;
- Pmsg1(0, "Begin writing raw blocks of %u bytes.\n", block->buf_len);
+ Pmsg1(0, _("Begin writing raw blocks of %u bytes.\n"), block->buf_len);
for ( ;; ) {
*p = block_num;
- stat = write(dev->fd, block->buf, block->buf_len);
+ stat = dev->d_write(dev->fd(), block->buf, block->buf_len);
if (stat == (int)block->buf_len) {
if ((block_num++ % 100) == 0) {
printf("+");
my_errno = errno;
printf("\n");
berrno be;
- printf("Write failed at block %u. stat=%d ERR=%s\n", block_num, stat,
- be.strerror(my_errno));
+ printf(_("Write failed at block %u. stat=%d ERR=%s\n"), block_num, stat,
+ be.bstrerror(my_errno));
weofcmd();
}
-/*
- * Fill a tape using Bacula block writes
- */
-static void bfill_cmd()
-{
- DEV_BLOCK *block = dcr->block;
- uint32_t block_num = 0;
- uint32_t *p;
- int my_errno;
- int fd;
- uint32_t i;
-
- fd = open("/dev/urandom", O_RDONLY);
- if (fd) {
- read(fd, block->buf, block->buf_len);
- close(fd);
- } else {
- uint32_t *p = (uint32_t *)block->buf;
- srandom(time(NULL));
- for (i=0; i<block->buf_len/sizeof(uint32_t); i++) {
- p[i] = random();
- }
- }
- p = (uint32_t *)block->buf;
- Pmsg1(0, "Begin writing Bacula blocks of %u bytes.\n", block->buf_len);
- for ( ;; ) {
- *p = block_num;
- block->binbuf = block->buf_len;
- block->bufp = block->buf + block->binbuf;
- if (!write_block_to_dev(dcr)) {
- break;
- }
- if ((block_num++ % 100) == 0) {
- printf("+");
- fflush(stdout);
- }
- p[0] += p[13];
- for (i=1; i<(block->buf_len/sizeof(uint32_t)-1); i++) {
- p[i] += p[i-1];
- }
- }
- my_errno = errno;
- printf("\n");
- printf("Write failed at block %u.\n", block_num);
- weofcmd();
-}
-
struct cmdstruct { const char *key; void (*func)(); const char *help; };
static struct cmdstruct commands[] = {
- {"autochanger", autochangercmd, "test autochanger"},
- {"bsf", bsfcmd, "backspace file"},
- {"bsr", bsrcmd, "backspace record"},
- {"bfill", bfill_cmd, "fill tape using Bacula writes"},
- {"cap", capcmd, "list device capabilities"},
- {"clear", clearcmd, "clear tape errors"},
- {"eod", eodcmd, "go to end of Bacula data for append"},
- {"eom", eomcmd, "go to the physical end of medium"},
- {"fill", fillcmd, "fill tape, write onto second volume"},
- {"unfill", unfillcmd, "read filled tape"},
- {"fsf", fsfcmd, "forward space a file"},
- {"fsr", fsrcmd, "forward space a record"},
- {"help", helpcmd, "print this command"},
- {"label", labelcmd, "write a Bacula label to the tape"},
- {"load", loadcmd, "load a tape"},
- {"quit", quitcmd, "quit btape"},
- {"rawfill", rawfill_cmd, "use write() to fill tape"},
- {"readlabel", readlabelcmd, "read and print the Bacula tape label"},
- {"rectest", rectestcmd, "test record handling functions"},
- {"rewind", rewindcmd, "rewind the tape"},
- {"scan", scancmd, "read() tape block by block to EOT and report"},
- {"scanblocks", scan_blocks, "Bacula read block by block to EOT and report"},
- {"status", statcmd, "print tape status"},
- {"test", testcmd, "General test Bacula tape functions"},
- {"weof", weofcmd, "write an EOF on the tape"},
- {"wr", wrcmd, "write a single Bacula block"},
- {"rr", rrcmd, "read a single record"},
- {"qfill", qfillcmd, "quick fill command"},
+ {NT_("autochanger"),autochangercmd, _("test autochanger")},
+ {NT_("bsf"), bsfcmd, _("backspace file")},
+ {NT_("bsr"), bsrcmd, _("backspace record")},
+ {NT_("cap"), capcmd, _("list device capabilities")},
+ {NT_("clear"), clearcmd, _("clear tape errors")},
+ {NT_("eod"), eodcmd, _("go to end of Bacula data for append")},
+ {NT_("eom"), eomcmd, _("go to the physical end of medium")},
+ {NT_("fill"), fillcmd, _("fill tape, write onto second volume")},
+ {NT_("unfill"), unfillcmd, _("read filled tape")},
+ {NT_("fsf"), fsfcmd, _("forward space a file")},
+ {NT_("fsr"), fsrcmd, _("forward space a record")},
+ {NT_("help"), helpcmd, _("print this command")},
+ {NT_("label"), labelcmd, _("write a Bacula label to the tape")},
+ {NT_("load"), loadcmd, _("load a tape")},
+ {NT_("quit"), quitcmd, _("quit btape")},
+ {NT_("rawfill"), rawfill_cmd, _("use write() to fill tape")},
+ {NT_("readlabel"), readlabelcmd, _("read and print the Bacula tape label")},
+ {NT_("rectest"), rectestcmd, _("test record handling functions")},
+ {NT_("rewind"), rewindcmd, _("rewind the tape")},
+ {NT_("scan"), scancmd, _("read() tape block by block to EOT and report")},
+ {NT_("scanblocks"),scan_blocks, _("Bacula read block by block to EOT and report")},
+ {NT_("status"), statcmd, _("print tape status")},
+ {NT_("test"), testcmd, _("General test Bacula tape functions")},
+ {NT_("weof"), weofcmd, _("write an EOF on the tape")},
+ {NT_("wr"), wrcmd, _("write a single Bacula block")},
+ {NT_("rr"), rrcmd, _("read a single record")},
+ {NT_("rb"), rbcmd, _("read a single Bacula block")},
+ {NT_("qfill"), qfillcmd, _("quick fill command")}
};
#define comsize (sizeof(commands)/sizeof(struct cmdstruct))
unsigned int i;
bool found;
- while (get_cmd("*")) {
+ while (!quit && get_cmd("*")) {
sm_check(__FILE__, __LINE__, false);
found = false;
parse_args(cmd, &args, &argc, argk, argv, MAX_CMD_ARGS);
found = true;
break;
}
- if (!found)
- Pmsg1(0, _("%s is an illegal command\n"), cmd);
- if (quit)
- break;
+ if (!found) {
+ Pmsg1(0, _("\"%s\" is an invalid command\n"), cmd);
+ }
}
}
static void usage()
{
fprintf(stderr, _(
-"Copyright (C) 2000-2005 Kern Sibbald.\n"
-"\nVersion: " VERSION " (" BDATE ")\n\n"
+PROG_COPYRIGHT
+"\nVersion: %s (%s)\n\n"
"Usage: btape <options> <device_name>\n"
" -b <file> specify bootstrap file\n"
" -c <file> set configuration file to file\n"
-" -d <nn> set debug level to nn\n"
+" -d <nn> set debug level to <nn>\n"
+" -dt print timestamp in debug output\n"
" -p proceed inspite of I/O errors\n"
" -s turn off signals\n"
" -v be verbose\n"
" -? print this message.\n"
-"\n"));
+"\n"), 2000, VERSION, BDATE);
}
bool dir_update_file_attributes(DCR *dcr, DEV_RECORD *rec) { return 1;}
bool dir_send_job_status(JCR *jcr) {return 1;}
-bool dir_update_volume_info(DCR *dcr, bool relabel)
+bool dir_update_volume_info(DCR *dcr, bool relabel, bool update_LastWritten)
{
return 1;
}
return dcr->VolumeName[0] != 0;
}
-bool dir_ask_sysop_to_mount_volume(DCR *dcr)
+bool dir_ask_sysop_to_mount_volume(DCR *dcr, int /* mode */)
{
DEVICE *dev = dcr->dev;
Dmsg0(20, "Enter dir_ask_sysop_to_mount_volume\n");
if (dcr->VolumeName[0] == 0) {
return dir_ask_sysop_to_create_appendable_volume(dcr);
}
- /* Close device so user can use autochanger if desired */
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
- }
- force_close_device(dev);
Pmsg1(-1, "%s", dev->errmsg); /* print reason */
if (dcr->VolumeName[0] == 0 || strcmp(dcr->VolumeName, "TestVolume2") == 0) {
- fprintf(stderr, "Mount second Volume on device %s and press return when ready: ",
+ fprintf(stderr, _("Mount second Volume on device %s and press return when ready: "),
dev->print_name());
} else {
- fprintf(stderr, "Mount Volume \"%s\" on device %s and press return when ready: ",
+ fprintf(stderr, _("Mount Volume \"%s\" on device %s and press return when ready: "),
dcr->VolumeName, dev->print_name());
}
+ dev->close();
getchar();
return true;
}
bool dir_ask_sysop_to_create_appendable_volume(DCR *dcr)
{
- bool autochanger;
+ int autochanger;
DEVICE *dev = dcr->dev;
Dmsg0(20, "Enter dir_ask_sysop_to_create_appendable_volume\n");
if (stop == 0) {
set_volume_name("TestVolume2", 2);
}
/* Close device so user can use autochanger if desired */
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
+ if (dev->has_cap(CAP_OFFLINEUNMOUNT)) {
+ dev->offline();
}
autochanger = autoload_device(dcr, 1, NULL);
- if (!autochanger) {
- force_close_device(dev);
- fprintf(stderr, "Mount blank Volume on device %s and press return when ready: ",
+ if (autochanger != 1) {
+ fprintf(stderr, _("Mount blank Volume on device %s and press return when ready: "),
dev->print_name());
+ dev->close();
getchar();
}
- open_device(dcr);
labelcmd();
VolumeName = NULL;
BlockNumber = 0;
DEV_BLOCK *block = dcr->block;
Dmsg0(20, "Enter my_mount_next_read_volume\n");
- Pmsg1(000, "End of Volume \"%s\"\n", dcr->VolumeName);
+ Pmsg2(000, _("End of Volume \"%s\" %d records.\n"), dcr->VolumeName,
+ quickie_count);
+ volume_unused(dcr); /* release current volume */
if (LastBlock != block->BlockNumber) {
VolBytes += block->block_len;
}
now = 1;
}
kbs = (double)VolBytes / (1000.0 * (double)now);
- Pmsg3(-1, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
+ Pmsg3(-1, _("Read block=%u, VolBytes=%s rate=%.1f KB/s\n"), block->BlockNumber,
edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
if (strcmp(dcr->VolumeName, "TestVolume2") == 0) {
return false;
}
- free_restore_volume_list(jcr);
set_volume_name("TestVolume2", 2);
- jcr->bsr = NULL;
- create_restore_volume_list(jcr);
- close_device(dev);
- dev->clear_read();
+
+ dev->close();
if (!acquire_device_for_read(dcr)) {
- Pmsg2(0, "Cannot open Dev=%s, Vol=%s\n", dev->print_name(), dcr->VolumeName);
+ Pmsg2(0, _("Cannot open Dev=%s, Vol=%s\n"), dev->print_name(), dcr->VolumeName);
return false;
}
return true; /* next volume mounted */
bstrncpy(dcr->VolCatInfo.VolCatName, VolName, sizeof(dcr->VolCatInfo.VolCatName));
bstrncpy(dcr->VolumeName, VolName, sizeof(dcr->VolumeName));
dcr->VolCatInfo.Slot = volnum;
+ dcr->VolCatInfo.InChanger = true;
}
-
-VOLRES *new_volume(DCR *dcr, const char *VolumeName) { return NULL; }
-bool free_volume(DEVICE *dev) { return true; }
-void free_unused_volume(DCR *dcr) { }
projects / bacula / bacula / blobdiff