Copyright (C) 2000-2005 Kern Sibbald
This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
+ modify it under the terms of the GNU General Public License
+ version 2 as amended with additional clauses defined in the
+ file LICENSE in the main source directory.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ the file LICENSE for additional details.
*/
/* Static variables */
#define CONFIG_FILE "bacula-sd.conf"
-char *configfile;
+char *configfile = NULL;
#define MAX_CMD_ARGS 30
static POOLMEM *cmd;
uint32_t x32, y32;
uint64_t x64, y64;
char buf[1000];
+
+ setlocale(LC_ALL, "");
+ bindtextdomain("bacula", LOCALEDIR);
+ textdomain("bacula");
/* Sanity checks */
if (TAPE_BSIZE % B_DEV_BSIZE != 0 || TAPE_BSIZE / B_DEV_BSIZE == 0) {
- Emsg2(M_ABORT, 0, "Tape block size (%d) not multiple of system size (%d)\n",
+ Emsg2(M_ABORT, 0, _("Tape block size (%d) not multiple of system size (%d)\n"),
TAPE_BSIZE, B_DEV_BSIZE);
}
if (TAPE_BSIZE != (1 << (ffs(TAPE_BSIZE)-1))) {
- Emsg1(M_ABORT, 0, "Tape block size (%d) is not a power of 2\n", TAPE_BSIZE);
+ Emsg1(M_ABORT, 0, _("Tape block size (%d) is not a power of 2\n"), TAPE_BSIZE);
}
if (sizeof(off_t) < 8) {
- Pmsg1(-1, "\n\n!!!! Warning large disk addressing disabled. off_t=%d should be 8 or more !!!!!\n\n\n",
+ Pmsg1(-1, _("\n\n!!!! Warning large disk addressing disabled. off_t=%d should be 8 or more !!!!!\n\n\n"),
sizeof(off_t));
}
x32 = 123456789;
bsnprintf(buf, sizeof(buf), "%u", x32);
i = bsscanf(buf, "%u", &y32);
if (i != 1 || x32 != y32) {
- Pmsg3(-1, "32 bit printf/scanf problem. i=%d x32=%u y32=%u\n", i, x32, y32);
+ Pmsg3(-1, _("32 bit printf/scanf problem. i=%d x32=%u y32=%u\n"), i, x32, y32);
exit(1);
}
x64 = 123456789;
bsnprintf(buf, sizeof(buf), "%" llu, x64);
i = bsscanf(buf, "%llu", &y64);
if (i != 1 || x64 != y64) {
- Pmsg3(-1, "64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n", i, x64, y64);
+ Pmsg3(-1, _("64 bit printf/scanf problem. i=%d x64=%" llu " y64=%" llu "\n"), i, x64, y64);
exit(1);
}
- printf("Tape block granularity is %d bytes.\n", TAPE_BSIZE);
+ printf(_("Tape block granularity is %d bytes.\n"), TAPE_BSIZE);
working_directory = "/tmp";
my_name_is(margc, margv, "btape");
/* See if we can open a device */
if (margc == 0) {
- Pmsg0(000, "No archive name specified.\n");
+ Pmsg0(000, _("No archive name specified.\n"));
usage();
exit(1);
} else if (margc != 1) {
- Pmsg0(000, "Improper number of arguments specified.\n");
+ Pmsg0(000, _("Improper number of arguments specified.\n"));
usage();
exit(1);
}
stop_watchdog();
term_msg();
close_memory_pool(); /* free memory in pool */
+ term_last_jobs_list();
sm_dump(false);
exit(stat);
block = new_block(dev);
lock_device(dev);
- if (!dev->is_open()) {
- Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
- if (open_dev(dev, dcr->VolumeName, OPEN_READ_WRITE) < 0) {
- Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
- unlock_device(dev);
- free_block(block);
- return false;
- }
+ Dmsg1(200, "Opening device %s\n", dcr->VolumeName);
+ if (dev->open(dcr, OPEN_READ_WRITE) < 0) {
+ Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
+ unlock_device(dev);
+ free_block(block);
+ return false;
}
- Pmsg1(000, "open_dev %s OK\n", dev->print_name());
+ Pmsg1(000, _("open device %s: OK\n"), dev->print_name());
dev->set_append(); /* put volume in append mode */
unlock_device(dev);
free_block(block);
if (VolumeName) {
pm_strcpy(cmd, VolumeName);
} else {
- if (!get_cmd("Enter Volume Name: ")) {
+ if (!get_cmd(_("Enter Volume Name: "))) {
return;
}
}
if (!dev->is_open()) {
- if (!first_open_device(dev)) {
- Pmsg1(0, "Device open failed. ERR=%s\n", strerror_dev(dev));
+ if (!first_open_device(dcr)) {
+ Pmsg1(0, _("Device open failed. ERR=%s\n"), strerror_dev(dev));
}
}
- rewind_dev(dev);
+ dev->rewind(dcr);
write_new_volume_label_to_dev(dcr, cmd, "Default");
- Pmsg1(-1, "Wrote Volume label for volume \"%s\".\n", cmd);
+ Pmsg1(-1, _("Wrote Volume label for volume \"%s\".\n"), cmd);
}
/*
stat = read_dev_volume_label(dcr);
switch (stat) {
case VOL_NO_LABEL:
- Pmsg0(0, "Volume has no label.\n");
+ Pmsg0(0, _("Volume has no label.\n"));
break;
case VOL_OK:
- Pmsg0(0, "Volume label read correctly.\n");
+ Pmsg0(0, _("Volume label read correctly.\n"));
break;
case VOL_IO_ERROR:
- Pmsg1(0, "I/O error on device: ERR=%s", strerror_dev(dev));
+ Pmsg1(0, _("I/O error on device: ERR=%s"), strerror_dev(dev));
break;
case VOL_NAME_ERROR:
- Pmsg0(0, "Volume name error\n");
+ Pmsg0(0, _("Volume name error\n"));
break;
case VOL_CREATE_ERROR:
- Pmsg1(0, "Error creating label. ERR=%s", strerror_dev(dev));
+ Pmsg1(0, _("Error creating label. ERR=%s"), strerror_dev(dev));
break;
case VOL_VERSION_ERROR:
- Pmsg0(0, "Volume version error.\n");
+ Pmsg0(0, _("Volume version error.\n"));
break;
case VOL_LABEL_ERROR:
- Pmsg0(0, "Bad Volume label type.\n");
+ Pmsg0(0, _("Bad Volume label type.\n"));
break;
default:
- Pmsg0(0, "Unknown error.\n");
+ Pmsg0(0, _("Unknown error.\n"));
break;
}
{
if (!load_dev(dev)) {
- Pmsg1(0, "Bad status from load. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(0, _("Bad status from load. ERR=%s\n"), strerror_dev(dev));
} else
- Pmsg1(0, "Loaded %s\n", dev->print_name());
+ Pmsg1(0, _("Loaded %s\n"), dev->print_name());
}
/*
*/
static void rewindcmd()
{
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
clrerror_dev(dev, -1);
} else {
- Pmsg1(0, "Rewound %s\n", dev->print_name());
+ Pmsg1(0, _("Rewound %s\n"), dev->print_name());
}
}
}
if ((stat = weof_dev(dev, num)) < 0) {
- Pmsg2(0, "Bad status from weof %d. ERR=%s\n", stat, strerror_dev(dev));
+ Pmsg2(0, _("Bad status from weof %d. ERR=%s\n"), stat, strerror_dev(dev));
return;
} else {
- Pmsg3(0, "Wrote %d EOF%s to %s\n", num, num==1?"":"s", dev->print_name());
+ if (num==1) {
+ Pmsg1(0, _("Wrote 1 EOF to %s\n"), dev->print_name());
+ }
+ else {
+ Pmsg2(0, _("Wrote %d EOFs to %s\n"), num, dev->print_name());
+ }
}
}
printf("File=%u block=%u\n", dev->file, dev->block_num);
printf("Min block=%u Max block=%u\n", dev->min_block_size, dev->max_block_size);
- printf("Status:\n");
+ printf(_("Status:\n"));
statcmd();
}
DEV_RECORD *rec;
int i, blkno = 0;
- Pmsg0(0, "Test writting larger and larger records.\n"
+ Pmsg0(0, _("Test writting larger and larger records.\n"
"This is a torture test for records.\nI am going to write\n"
"larger and larger records. It will stop when the record size\n"
-"plus the header exceeds the block size (by default about 64K)\n");
+"plus the header exceeds the block size (by default about 64K)\n"));
- get_cmd("Do you want to continue? (y/n): ");
+ get_cmd(_("Do you want to continue? (y/n): "));
if (cmd[0] != 'y') {
- Pmsg0(000, "Command aborted.\n");
+ Pmsg0(000, _("Command aborted.\n"));
return;
}
if (write_record_to_block(block, rec)) {
empty_block(block);
blkno++;
- Pmsg2(0, "Block %d i=%d\n", blkno, i);
+ Pmsg2(0, _("Block %d i=%d\n"), blkno, i);
} else {
break;
}
goto bail_out;
}
}
- Pmsg0(0, "Backspaced over EOF OK.\n");
+ Pmsg0(0, _("Backspaced over EOF OK.\n"));
if (!bsr_dev(dev, 1)) {
Pmsg1(0, _("Backspace record failed! ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
- Pmsg0(0, "Backspace record OK.\n");
+ Pmsg0(0, _("Backspace record OK.\n"));
if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
berrno be;
Pmsg1(0, _("Read block failed! ERR=%s\n"), be.strerror(dev->dev_errno));
"This is an *essential* feature ...\n\n"));
block = dcr->block;
rec = new_record();
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
rec->data = check_pool_memory_size(rec->data, block->buf_len);
if (dev_cap(dev, CAP_TWOEOF)) {
weofcmd();
}
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
} else {
- Pmsg0(0, "Rewind OK.\n");
+ Pmsg0(0, _("Rewind OK.\n"));
}
for (i=1; i<=2000; i++) {
read_again:
"This is an *essential* feature ...\n\n"));
empty_block(block);
rec = new_record();
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
rec->data = check_pool_memory_size(rec->data, block->buf_len);
if (dev_cap(dev, CAP_TWOEOF)) {
weofcmd();
}
- if (!rewind_dev(dev)) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr)) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
} else {
- Pmsg0(0, "Rewind OK.\n");
+ Pmsg0(0, _("Rewind OK.\n"));
}
while(ok) {
ok = false;
continue;
}
- Pmsg2(-1, "Reposition to file:block %d:%d\n", file, blk);
+ Pmsg2(-1, _("Reposition to file:block %d:%d\n"), file, blk);
if (!reposition_dev(dev, file, blk)) {
- Pmsg0(0, "Reposition error.\n");
+ Pmsg0(0, _("Reposition error.\n"));
goto bail_out;
}
read_again:
if (dev_cap(dev, CAP_TWOEOF)) {
weofcmd();
}
- force_close_dev(dev); /* release device */
+ force_close_device(dev); /* release device */
if (!open_the_device()) {
return -1;
}
rewindcmd();
Pmsg0(0, _("Now moving to end of medium.\n"));
eodcmd();
- Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"),
- dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+ dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 3) {
return -1;
}
rewindcmd();
Pmsg0(-1, _("Done appending, there should be no I/O errors\n\n"));
- Pmsg0(-1, "Doing Bacula scan of blocks:\n");
+ Pmsg0(-1, _("Doing Bacula scan of blocks:\n"));
scan_blocks();
Pmsg0(-1, _("End scanning the tape.\n"));
- Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"),
- dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+ dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 4) {
return -2;
return 1;
}
if (!(dcr->device && dcr->device->changer_name && dcr->device->changer_command)) {
- Pmsg0(-1, "\nAutochanger enabled, but no name or no command device specified.\n");
+ Pmsg0(-1, _("\nAutochanger enabled, but no name or no command device specified.\n"));
return 1;
}
- Pmsg0(-1, "\nAh, I see you have an autochanger configured.\n"
+ Pmsg0(-1, _("\nAh, I see you have an autochanger configured.\n"
"To test the autochanger you must have a blank tape\n"
- " that I can write on in Slot 1.\n");
- if (!get_cmd("\nDo you wish to continue with the Autochanger test? (y/n): ")) {
+ " that I can write on in Slot 1.\n"));
+ if (!get_cmd(_("\nDo you wish to continue with the Autochanger test? (y/n): "))) {
return 0;
}
if (cmd[0] != 'y' && cmd[0] != 'Y') {
dcr->VolCatInfo.Slot = slot;
/* Find out what is loaded, zero means device is unloaded */
Pmsg0(-1, _("3301 Issuing autochanger \"loaded\" command.\n"));
- changer = edit_device_codes(dcr, changer, "loaded");
+ changer = edit_device_codes(dcr, changer,
+ dcr->device->changer_command, "loaded");
status = run_program(changer, timeout, results);
Dmsg3(100, "run_prog: %s stat=%d result=\"%s\"\n", changer, status, results);
if (status == 0) {
goto bail_out;
}
if (loaded) {
- Pmsg1(-1, "Slot %d loaded. I am going to unload it.\n", loaded);
+ Pmsg1(-1, _("Slot %d loaded. I am going to unload it.\n"), loaded);
} else {
- Pmsg0(-1, "Nothing loaded in the drive. OK.\n");
+ Pmsg0(-1, _("Nothing loaded in the drive. OK.\n"));
}
Dmsg1(100, "Results from loaded query=%s\n", results);
if (loaded) {
dcr->VolCatInfo.Slot = loaded;
offline_or_rewind_dev(dev);
/* We are going to load a new tape, so close the device */
- force_close_dev(dev);
+ force_close_device(dev);
Pmsg2(-1, _("3302 Issuing autochanger \"unload %d %d\" command.\n"),
loaded, dev->drive_index);
- changer = edit_device_codes(dcr, changer, "unload");
+ changer = edit_device_codes(dcr, changer,
+ dcr->device->changer_command, "unload");
status = run_program(changer, timeout, results);
- Pmsg2(-1, "unload status=%s %d\n", status==0?"OK":"Bad", status);
+ Pmsg2(-1, _("unload status=%s %d\n"), status==0?_("OK"):_("Bad"), status);
if (status != 0) {
berrno be;
Pmsg1(-1, _("3992 Bad autochanger command: %s\n"), changer);
slot = 1;
dcr->VolCatInfo.Slot = slot;
- Pmsg2(-1, _("3303 Issuing autochanger \"load slot %d %d\" command.\n"),
+ Pmsg2(-1, _("3303 Issuing autochanger \"load %d %d\" command.\n"),
slot, dev->drive_index);
- changer = edit_device_codes(dcr, changer, "load");
+ changer = edit_device_codes(dcr, changer,
+ dcr->device->changer_command, "load");
Dmsg1(100, "Changer=%s\n", changer);
- force_close_dev(dev);
+ force_close_device(dev);
status = run_program(changer, timeout, results);
if (status == 0) {
- Pmsg2(-1, _("3303 Autochanger \"load slot %d %d\" status is OK.\n"),
+ Pmsg2(-1, _("3303 Autochanger \"load %d %d\" status is OK.\n"),
slot, dev->drive_index);
} else {
berrno be;
* a failure.
*/
bmicrosleep(sleep_time, 0);
- if (!rewind_dev(dev) || weof_dev(dev,1) < 0) {
- Pmsg1(0, "Bad status from rewind. ERR=%s\n", strerror_dev(dev));
+ if (!dev->rewind(dcr) || weof_dev(dev,1) < 0) {
+ Pmsg1(0, _("Bad status from rewind. ERR=%s\n"), strerror_dev(dev));
clrerror_dev(dev, -1);
- Pmsg0(-1, "\nThe test failed, probably because you need to put\n"
+ Pmsg0(-1, _("\nThe test failed, probably because you need to put\n"
"a longer sleep time in the mtx-script in the load) case.\n"
- "Adding a 30 second sleep and trying again ...\n");
+ "Adding a 30 second sleep and trying again ...\n"));
sleep_time += 30;
goto try_again;
} else {
- Pmsg1(0, "Rewound %s\n", dev->print_name());
+ Pmsg1(0, _("Rewound %s\n"), dev->print_name());
}
if ((status = weof_dev(dev, 1)) < 0) {
- Pmsg2(0, "Bad status from weof %d. ERR=%s\n", status, strerror_dev(dev));
+ Pmsg2(0, _("Bad status from weof %d. ERR=%s\n"), status, strerror_dev(dev));
goto bail_out;
} else {
- Pmsg1(0, "Wrote EOF to %s\n", dev->print_name());
+ Pmsg1(0, _("Wrote EOF to %s\n"), dev->print_name());
}
if (sleep_time) {
- Pmsg1(-1, "\nThe test worked this time. Please add:\n\n"
+ Pmsg1(-1, _("\nThe test worked this time. Please add:\n\n"
" sleep %d\n\n"
- "to your mtx-changer script in the load) case.\n\n",
+ "to your mtx-changer script in the load) case.\n\n"),
sleep_time);
} else {
- Pmsg0(-1, "\nThe test autochanger worked!!\n\n");
+ Pmsg0(-1, _("\nThe test autochanger worked!!\n\n"));
}
free_pool_memory(changer);
bail_out:
free_pool_memory(changer);
free_pool_memory(results);
- Pmsg0(-1, "You must correct this error or the Autochanger will not work.\n");
+ Pmsg0(-1, _("You must correct this error or the Autochanger will not work.\n"));
return -2;
}
test_again:
rewindcmd();
Pmsg0(0, _("Now forward spacing 1 file.\n"));
- if (!fsf_dev(dev, 1)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(1)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 1. I am at file %d. This is %s\n"),
- dev->file, dev->file == 1 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 1. I am at file %d. %s\n"),
+ dev->file, dev->file == 1 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 1) {
goto bail_out;
}
Pmsg0(0, _("Now forward spacing 2 files.\n"));
- if (!fsf_dev(dev, 2)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(2)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 3. I am at file %d. This is %s\n"),
- dev->file, dev->file == 3 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 3. I am at file %d. %s\n"),
+ dev->file, dev->file == 3 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 3) {
goto bail_out;
rewindcmd();
Pmsg0(0, _("Now forward spacing 4 files.\n"));
- if (!fsf_dev(dev, 4)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(4)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
- Pmsg2(-1, _("We should be in file 4. I am at file %d. This is %s\n"),
- dev->file, dev->file == 4 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 4. I am at file %d. %s\n"),
+ dev->file, dev->file == 4 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 4) {
goto bail_out;
}
if (set_off) {
- Pmsg0(-1, "The test worked this time. Please add:\n\n"
+ Pmsg0(-1, _("The test worked this time. Please add:\n\n"
" Fast Forward Space File = no\n\n"
- "to your Device resource for this drive.\n");
+ "to your Device resource for this drive.\n"));
}
Pmsg0(-1, "\n");
Pmsg0(0, _("Now forward spacing 1 more file.\n"));
- if (!fsf_dev(dev, 1)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(1)) {
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), strerror_dev(dev));
}
- Pmsg2(-1, _("We should be in file 5. I am at file %d. This is %s\n"),
- dev->file, dev->file == 5 ? "correct!" : "NOT correct!!!!");
+ Pmsg2(-1, _("We should be in file 5. I am at file %d. %s\n"),
+ dev->file, dev->file == 5 ? _("This is correct!") : _("This is NOT correct!!!!"));
if (dev->file != 5) {
goto bail_out;
}
bail_out:
Pmsg0(-1, _("\nThe forward space file test failed.\n"));
if (dev_cap(dev, CAP_FASTFSF)) {
- Pmsg0(-1, "You have Fast Forward Space File enabled.\n"
- "I am turning it off then retrying the test.\n");
+ Pmsg0(-1, _("You have Fast Forward Space File enabled.\n"
+ "I am turning it off then retrying the test.\n"));
dev->capabilities &= ~CAP_FASTFSF;
set_off = true;
goto test_again;
}
- Pmsg0(-1, "You must correct this error or Bacula will not work.\n"
+ Pmsg0(-1, _("You must correct this error or Bacula will not work.\n"
"Some systems, e.g. OpenBSD, require you to set\n"
" Use MTIOCGET= no\n"
- "in your device resource. Use with caution.\n");
+ "in your device resource. Use with caution.\n"));
return -2;
}
}
if (stat == -1) { /* first test failed */
if (dev_cap(dev, CAP_EOM) || dev_cap(dev, CAP_FASTFSF)) {
- Pmsg0(-1, "\nAppend test failed. Attempting again.\n"
+ Pmsg0(-1, _("\nAppend test failed. Attempting again.\n"
"Setting \"Hardware End of Medium = no\n"
" and \"Fast Forward Space File = no\n"
- "and retrying append test.\n\n");
+ "and retrying append test.\n\n"));
dev->capabilities &= ~CAP_EOM; /* turn off eom */
dev->capabilities &= ~CAP_FASTFSF; /* turn off fast fsf */
stat = append_test();
if (stat == 1) {
- Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+ Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n\n"
" Fast Forward Space File = No\n"
- "to your Device resource in the Storage conf file.\n");
+ "to your Device resource in the Storage conf file.\n"));
goto all_done;
}
if (stat == -1) {
- Pmsg0(-1, "\n\nThat appears *NOT* to have corrected the problem.\n");
+ Pmsg0(-1, _("\n\nThat appears *NOT* to have corrected the problem.\n"));
goto failed;
}
/* Wrong count after append */
if (stat == -2) {
- Pmsg0(-1, "\n\nIt looks like the append failed. Attempting again.\n"
- "Setting \"BSF at EOM = yes\" and retrying append test.\n");
+ Pmsg0(-1, _("\n\nIt looks like the append failed. Attempting again.\n"
+ "Setting \"BSF at EOM = yes\" and retrying append test.\n"));
dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
stat = append_test();
if (stat == 1) {
- Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
+ Pmsg0(-1, _("\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n"
" Fast Forward Space File = No\n"
" BSF at EOM = yes\n\n"
- "to your Device resource in the Storage conf file.\n");
+ "to your Device resource in the Storage conf file.\n"));
goto all_done;
}
}
}
failed:
- Pmsg0(-1, "\nAppend test failed.\n\n");
- Pmsg0(-1, "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+ Pmsg0(-1, _("\nAppend test failed.\n\n"
+ "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
"Unable to correct the problem. You MUST fix this\n"
- "problem before Bacula can use your tape drive correctly\n");
- Pmsg0(-1, "\nPerhaps running Bacula in fixed block mode will work.\n"
+ "problem before Bacula can use your tape drive correctly\n"
+ "\nPerhaps running Bacula in fixed block mode will work.\n"
"Do so by setting:\n\n"
"Minimum Block Size = nnn\n"
"Maximum Block Size = nnn\n\n"
"\n"
"Some systems, e.g. OpenBSD, require you to set\n"
" Use MTIOCGET= no\n"
- "in your device resource. Use with caution.\n");
+ "in your device resource. Use with caution.\n"));
return;
}
"1 block of 64448 bytes in file 4\n"
"End of File mark.\n"
"Total files=4, blocks=7, bytes = 451,136\n"
- "=== End sample correct output ===\n\n"));
-
- Pmsg0(-1, _("If the above scan output is not identical to the\n"
- "sample output, you MUST correct the problem\n"
- "or Bacula will not be able to write multiple Jobs to \n"
- "the tape.\n\n"));
+ "=== End sample correct output ===\n\n"
+ "If the above scan output is not identical to the\n"
+ "sample output, you MUST correct the problem\n"
+ "or Bacula will not be able to write multiple Jobs to \n"
+ "the tape.\n\n"));
if (stat == 1) {
re_read_block_test();
if (num <= 0) {
num = 1;
}
- if (!fsf_dev(dev, num)) {
- Pmsg1(0, "Bad status from fsf. ERR=%s\n", strerror_dev(dev));
+ if (!dev->fsf(num)) {
+ Pmsg1(0, _("Bad status from fsf. ERR=%s\n"), strerror_dev(dev));
return;
}
- Pmsg2(0, "Forward spaced %d file%s.\n", num, num==1?"":"s");
+ if (num == 1) {
+ Pmsg0(0, _("Forward spaced 1 file.\n"));
+ }
+ else {
+ Pmsg1(0, _("Forward spaced %d files.\n"), num);
+ }
}
/* Forward space a record */
num = 1;
}
if (!dev->fsr(num)) {
- Pmsg1(0, "Bad status from fsr. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(0, _("Bad status from fsr. ERR=%s\n"), strerror_dev(dev));
return;
}
- Pmsg2(0, "Forward spaced %d record%s.\n", num, num==1?"":"s");
+ if (num == 1) {
+ Pmsg0(0, _("Forward spaced 1 record.\n"));
+ }
+ else {
+ Pmsg1(0, _("Forward spaced %d records.\n"), num);
+ }
}
char *buf;
int stat, len;
- if (!get_cmd("Enter length to read: ")) {
+ if (!get_cmd(_("Enter length to read: "))) {
return;
}
len = atoi(cmd);
blocks = block_size = tot_blocks = 0;
bytes = 0;
if (dev->state & ST_EOT) {
- Pmsg0(0, "End of tape\n");
+ Pmsg0(0, _("End of tape\n"));
return;
}
update_pos_dev(dev);
if ((stat = read(dev->fd, buf, sizeof(buf))) < 0) {
berrno be;
clrerror_dev(dev, -1);
- Mmsg2(dev->errmsg, "read error on %s. ERR=%s.\n",
+ Mmsg2(dev->errmsg, _("read error on %s. ERR=%s.\n"),
dev->dev_name, be.strerror());
- Pmsg2(0, "Bad status from read %d. ERR=%s\n", stat, strerror_dev(dev));
- if (blocks > 0)
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ Pmsg2(0, _("Bad status from read %d. ERR=%s\n"), stat, strerror_dev(dev));
+ if (blocks > 0) {
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
+ }
return;
}
Dmsg1(200, "read status = %d\n", stat);
if (stat != block_size) {
update_pos_dev(dev);
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
block_size = stat;
}
if (stat == 0) { /* EOF */
update_pos_dev(dev);
- printf("End of File mark.\n");
+ printf(_("End of File mark.\n"));
/* Two reads of zero means end of tape */
if (dev->state & ST_EOF)
dev->state |= ST_EOT;
dev->file++;
}
if (dev->state & ST_EOT) {
- printf("End of tape\n");
+ printf(_("End of tape\n"));
break;
}
} else { /* Got data */
}
update_pos_dev(dev);
tot_files = dev->file - tot_files;
- printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks,
+ printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,
edit_uint64_with_commas(bytes, ec1));
}
uint64_t bytes;
DEV_BLOCK *block = dcr->block;
char ec1[50];
+ char buf1[100], buf2[100];
blocks = block_size = tot_blocks = 0;
bytes = 0;
Dmsg1(100, "!read_block(): ERR=%s\n", strerror_dev(dev));
if (dev->state & ST_EOT) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
goto bail_out;
}
if (dev->state & ST_EOF) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
printf(_("End of File mark.\n"));
}
if (dev->state & ST_SHORT) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
printf(_("Short block read.\n"));
}
if (block->block_len != block_size) {
if (blocks > 0) {
- printf("%d block%s of %d bytes in file %d\n",
- blocks, blocks>1?"s":"", block_size, dev->file);
+ if (blocks==1) {
+ printf(_("1 block of %d bytes in file %d\n"), block_size, dev->file);
+ }
+ else {
+ printf(_("%d blocks of %d bytes in file %d\n"), blocks, block_size, dev->file);
+ }
blocks = 0;
}
block_size = block->block_len;
if (verbose == 1) {
DEV_RECORD *rec = new_record();
read_record_from_block(block, rec);
- Pmsg8(-1, "Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n",
+ Pmsg8(-1, _("Blk_block: %u dev_blk=%u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n"),
block->BlockNumber, dev->block_num, block->block_len,
- FI_to_ascii(rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
- stream_to_ascii(rec->Stream, rec->FileIndex), rec->data_len);
+ FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
+ stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
rec->remainder = 0;
free_record(rec);
} else if (verbose > 1) {
}
bail_out:
tot_files = dev->file - tot_files;
- printf("Total files=%d, blocks=%d, bytes = %s\n", tot_files, tot_blocks,
+ printf(_("Total files=%d, blocks=%d, bytes = %s\n"), tot_files, tot_blocks,
edit_uint64_with_commas(bytes, ec1));
}
{
int debug = debug_level;
debug_level = 30;
- Pmsg2(0, "Device status: %u. ERR=%s\n", status_dev(dev), strerror_dev(dev));
+ Pmsg2(0, _("Device status: %u. ERR=%s\n"), status_dev(dev), strerror_dev(dev));
#ifdef xxxx
dump_volume_label(dev);
#endif
DEV_RECORD rec;
DEV_BLOCK *block = dcr->block;
char ec1[50];
+ char buf1[100], buf2[100];
int fd;
uint32_t i;
uint32_t min_block_size;
+ struct tm tm;
ok = true;
stop = 0;
last_block_num = 0;
BlockNumber = 0;
- Pmsg0(-1, "\n"
+ Pmsg0(-1, _("\n"
"This command simulates Bacula writing to a tape.\n"
"It requires either one or two blank tapes, which it\n"
"will label and write.\n\n"
"fills, it will ask for a second, and after writing a few more \n"
"blocks, it will stop. Then it will begin re-reading the\n"
"two tapes.\n\n"
-"This may take a long time -- hours! ...\n\n");
+"This may take a long time -- hours! ...\n\n"));
- get_cmd("Do you want to run the simplified test (s) with one tape\n"
- "or the complete multiple tape (m) test: (s/m) ");
+ get_cmd(_("Do you want to run the simplified test (s) with one tape\n"
+ "or the complete multiple tape (m) test: (s/m) "));
if (cmd[0] == 's') {
- Pmsg0(-1, "Simple test (single tape) selected.\n");
+ Pmsg0(-1, _("Simple test (single tape) selected.\n"));
simple = true;
} else if (cmd[0] == 'm') {
- Pmsg0(-1, "Multiple tape test selected.\n");
+ Pmsg0(-1, _("Multiple tape test selected.\n"));
simple = false;
} else {
- Pmsg0(000, "Command aborted.\n");
+ Pmsg0(000, _("Command aborted.\n"));
return;
}
dev->min_block_size = dev->max_block_size;
set_volume_name("TestVolume1", 1);
- if (!dev->rewind()) {
- Pmsg0(000, "Rewind failed.\n");
+ if (!dev->rewind(dcr)) {
+ Pmsg0(000, _("Rewind failed.\n"));
}
if (!dev->weof()) {
- Pmsg0(000, "Write EOF failed.\n");
+ Pmsg0(000, _("Write EOF failed.\n"));
}
labelcmd();
dev->set_append(); /* force volume to be relabeled */
strerror_dev(dev));
ok = false;
}
- Pmsg0(-1, "Wrote Start of Session label.\n");
+ Pmsg0(-1, _("Wrote Start of Session label.\n"));
memset(&rec, 0, sizeof(rec));
rec.data = get_memory(100000); /* max record size */
*/
jcr->dcr->VolFirstIndex = 0;
time(&jcr->run_time); /* start counting time for rates */
+ localtime_r(&jcr->run_time, &tm);
+ strftime(buf1, sizeof(buf1), "%T", &tm);
if (simple) {
- Pmsg0(-1, "Begin writing Bacula records to tape ...\n");
+ Pmsg1(-1, _("%s Begin writing Bacula records to tape ...\n"), buf1);
} else {
- Pmsg0(-1, "Begin writing Bacula records to first tape ...\n");
+ Pmsg1(-1, _("%s Begin writing Bacula records to first tape ...\n"), buf1);
}
for (file_index = 0; ok && !job_canceled(jcr); ) {
rec.VolSessionId = jcr->VolSessionId;
}
Dmsg4(250, "before write_rec FI=%d SessId=%d Strm=%s len=%d\n",
- rec.FileIndex, rec.VolSessionId, stream_to_ascii(rec.Stream, rec.FileIndex),
+ rec.FileIndex, rec.VolSessionId,
+ stream_to_ascii(buf1, rec.Stream, rec.FileIndex),
rec.data_len);
while (!write_record_to_block(block, &rec)) {
now = 1; /* prevent divide error */
}
kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
- Pmsg4(-1, "Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n",
+ Pmsg4(-1, _("Wrote blk_block=%u, dev_blk_num=%u VolBytes=%s rate=%.1f KB/s\n"),
block->BlockNumber, dev->block_num,
edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
}
- /* Every 15000 blocks (approx 1GB) write an EOF.
+ /* Every 32000 blocks (approx 2GB) write an EOF.
*/
- if ((block->BlockNumber % 15000) == 0) {
- Pmsg0(-1, "Flush block, write EOF\n");
+ if ((block->BlockNumber % 32000) == 0) {
+ now = time(NULL);
+ localtime_r(&now, &tm);
+ strftime(buf1, sizeof(buf1), "%T", &tm);
+ Pmsg1(-1, _("%s Flush block, write EOF\n"), buf1);
flush_block(block, 0);
weof_dev(dev, 1);
}
}
jcr->JobBytes += rec.data_len; /* increment bytes this job */
Dmsg4(190, "write_record FI=%s SessId=%d Strm=%s len=%d\n",
- FI_to_ascii(rec.FileIndex), rec.VolSessionId,
- stream_to_ascii(rec.Stream, rec.FileIndex), rec.data_len);
+ FI_to_ascii(buf1, rec.FileIndex), rec.VolSessionId,
+ stream_to_ascii(buf2, rec.Stream, rec.FileIndex), rec.data_len);
/* Get out after writing 10 blocks to the second tape */
if (BlockNumber > 10 && stop != 0) { /* get out */
write(fd, last_block2->buf, last_block2->buf_len);
write(fd, first_block->buf, first_block->buf_len);
close(fd);
- Pmsg2(-1, "Wrote state file last_block_num1=%d last_block_num2=%d\n",
+ Pmsg2(-1, _("Wrote state file last_block_num1=%d last_block_num2=%d\n"),
last_block_num1, last_block_num2);
} else {
berrno be;
be.strerror());
}
- Pmsg4(-1, _("\n\nDone filling tape%s at %d:%d. Now beginning re-read of %stape ...\n"),
- simple?"":"s", jcr->dcr->dev->file, jcr->dcr->dev->block_num, simple?"":"first ");
+ now = time(NULL);
+ localtime_r(&now, &tm);
+ strftime(buf1, sizeof(buf1), "%T", &tm);
+ if (simple) {
+ Pmsg3(-1, _("\n\n%s Done filling tape at %d:%d. Now beginning re-read of tape ...\n"),
+ buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);
+ }
+ else {
+ Pmsg3(-1, _("\n\n%s Done filling tapes at %d:%d. Now beginning re-read of first tape ...\n"),
+ buf1, jcr->dcr->dev->file, jcr->dcr->dev->block_num);
+ }
jcr->dcr->block = block;
do_unfill();
read(fd, first_block->buf, first_block->buf_len);
close(fd);
if (state_level != btape_state_level) {
- Pmsg0(-1, "\nThe state file level has changed. You must redo\n"
- "the fill command.\n");
+ Pmsg0(-1, _("\nThe state file level has changed. You must redo\n"
+ "the fill command.\n"));
return;
}
} else {
berrno be;
- Pmsg2(-1, "\nCould not find the state file: %s ERR=%s\n"
- "You must redo the fill command.\n", buf, be.strerror());
+ Pmsg2(-1, _("\nCould not find the state file: %s ERR=%s\n"
+ "You must redo the fill command.\n"), buf, be.strerror());
return;
}
do_unfill();
}
autochanger = autoload_device(dcr, 1, NULL);
if (!autochanger) {
- force_close_dev(dev);
+ force_close_device(dev);
get_cmd(_("Mount first tape. Press enter when ready: "));
}
- free_vol_list(jcr);
+ free_restore_volume_list(jcr);
jcr->dcr = new_dcr(jcr, dev);
set_volume_name("TestVolume1", 1);
jcr->bsr = NULL;
- create_vol_list(jcr);
- close_dev(dev);
+ create_restore_volume_list(jcr);
+ close_device(dev);
dev->state &= ~(ST_READ|ST_APPEND);
dev->num_writers = 0;
if (!acquire_device_for_read(dcr)) {
* Note, re-reading last block may have caused us to
* loose track of where we are (block number unknown).
*/
- if (!rewind_dev(dev)) { /* get to a known place on tape */
+ Pmsg0(-1, _("Rewinding.\n"));
+ if (!dev->rewind(dcr)) { /* get to a known place on tape */
goto bail_out;
}
/* Read the first 10000 records */
- Pmsg0(-1, _("Reading the first 10000 records.\n"));
+ Pmsg2(-1, _("Reading the first 10000 records from %u:%u.\n"),
+ dev->file, dev->block_num);
quickie_count = 0;
read_records(dcr, quickie_cb, my_mount_next_read_volume);
Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
last_file, last_block_num);
if (!reposition_dev(dev, last_file, last_block_num)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
Pmsg1(-1, _("Reading block %u.\n"), last_block_num);
offline_dev(dev);
}
- free_vol_list(jcr);
+ free_restore_volume_list(jcr);
set_volume_name("TestVolume2", 2);
jcr->bsr = NULL;
- create_vol_list(jcr);
+ create_restore_volume_list(jcr);
autochanger = autoload_device(dcr, 1, NULL);
if (!autochanger) {
- force_close_dev(dev);
+ force_close_device(dev);
get_cmd(_("Mount second tape. Press enter when ready: "));
}
*/
Pmsg2(-1, _("Reposition from %u:%u to 0:1\n"), dev->file, dev->block_num);
if (!reposition_dev(dev, 0, 1)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
Pmsg4(-1, _("Reposition from %u:%u to %u:%u\n"), dev->file, dev->block_num,
last_file, last_block_num);
if (!reposition_dev(dev, last_file, last_block_num)) {
- Pmsg1(-1, "Reposition error. ERR=%s\n", strerror_dev(dev));
+ Pmsg1(-1, _("Reposition error. ERR=%s\n"), strerror_dev(dev));
goto bail_out;
}
Pmsg1(-1, _("Reading block %d.\n"), dev->block_num);
static bool quickie_cb(DCR *dcr, DEV_RECORD *rec)
{
DEVICE *dev = dcr->dev;
- if (dev->file != 0) {
- Pmsg3(-1, "ERROR! device at %d:%d count=%d\n", dev->file, dev->block_num,
- quickie_count);
- return false;
- }
quickie_count++;
if (quickie_count == 10000) {
- Pmsg2(-1, "1000 records read now at %d:%d\n", dev->file, dev->block_num);
+ Pmsg2(-1, _("10000 records read now at %d:%d\n"), dev->file, dev->block_num);
}
return quickie_count < 10000;
}
dump_block(last_block, _("Last block written"));
Pmsg0(-1, "\n");
dump_block(block, _("Block read back"));
- Pmsg1(-1, "\n\nThe blocks differ at byte %u\n", p - last_block->buf);
- Pmsg0(-1, "\n\n!!!! The last block written and the block\n"
+ Pmsg1(-1, _("\n\nThe blocks differ at byte %u\n"), p - last_block->buf);
+ Pmsg0(-1, _("\n\n!!!! The last block written and the block\n"
"that was read back differ. The test FAILED !!!!\n"
"This must be corrected before you use Bacula\n"
- "to write multi-tape Volumes.!!!!\n");
+ "to write multi-tape Volumes.!!!!\n"));
return false;
}
if (verbose) {
this_file = dev->file;
this_block_num = dev->block_num;
if (!write_block_to_dev(dcr)) {
- Pmsg3(000, "Last block at: %u:%u this_dev_block_num=%d\n",
+ Pmsg3(000, _("Last block at: %u:%u this_dev_block_num=%d\n"),
last_file, last_block_num, this_block_num);
if (vol_num == 1) {
/*
first_block = dup_block(block); /* first block second tape */
}
if (verbose) {
- Pmsg3(000, "Block not written: FileIndex=%u blk_block=%u Size=%u\n",
+ Pmsg3(000, _("Block not written: FileIndex=%u blk_block=%u Size=%u\n"),
(unsigned)file_index, block->BlockNumber, block->block_len);
- dump_block(last_block, "Last block written");
+ dump_block(last_block, _("Last block written"));
Pmsg0(-1, "\n");
- dump_block(block, "Block not written");
+ dump_block(block, _("Block not written"));
}
if (stop == 0) {
eot_block = block->BlockNumber;
}
kbs = (double)dev->VolCatInfo.VolCatBytes / (1000 * now);
vol_size = dev->VolCatInfo.VolCatBytes;
- Pmsg4(000, "End of tape %d:%d. VolumeCapacity=%s. Write rate = %.1f KB/s\n",
+ Pmsg4(000, _("End of tape %d:%d. VolumeCapacity=%s. Write rate = %.1f KB/s\n"),
dev->file, dev->block_num,
edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);
DEV_RECORD *rec = dcr->rec;
int i, count;
- Pmsg0(0, "Test writing blocks of 64512 bytes to tape.\n");
+ Pmsg0(0, _("Test writing blocks of 64512 bytes to tape.\n"));
- get_cmd("How many blocks do you want to write? (1000): ");
+ get_cmd(_("How many blocks do you want to write? (1000): "));
count = atoi(cmd);
if (count <= 0) {
memset(rec->data, i & 0xFF, i);
rec->data_len = i;
rewindcmd();
- Pmsg1(0, "Begin writing %d Bacula blocks to tape ...\n", count);
+ Pmsg1(0, _("Begin writing %d Bacula blocks to tape ...\n"), count);
for (i=0; i < count; i++) {
if (i % 100 == 0) {
printf("+");
}
}
p = (uint32_t *)block->buf;
- Pmsg1(0, "Begin writing raw blocks of %u bytes.\n", block->buf_len);
+ Pmsg1(0, _("Begin writing raw blocks of %u bytes.\n"), block->buf_len);
for ( ;; ) {
*p = block_num;
stat = write(dev->fd, block->buf, block->buf_len);
my_errno = errno;
printf("\n");
berrno be;
- printf("Write failed at block %u. stat=%d ERR=%s\n", block_num, stat,
+ printf(_("Write failed at block %u. stat=%d ERR=%s\n"), block_num, stat,
be.strerror(my_errno));
weofcmd();
}
}
}
p = (uint32_t *)block->buf;
- Pmsg1(0, "Begin writing Bacula blocks of %u bytes.\n", block->buf_len);
+ Pmsg1(0, _("Begin writing Bacula blocks of %u bytes.\n"), block->buf_len);
for ( ;; ) {
*p = block_num;
block->binbuf = block->buf_len;
}
my_errno = errno;
printf("\n");
- printf("Write failed at block %u.\n", block_num);
+ printf(_("Write failed at block %u.\n"), block_num);
weofcmd();
}
struct cmdstruct { const char *key; void (*func)(); const char *help; };
static struct cmdstruct commands[] = {
- {"autochanger", autochangercmd, "test autochanger"},
- {"bsf", bsfcmd, "backspace file"},
- {"bsr", bsrcmd, "backspace record"},
- {"bfill", bfill_cmd, "fill tape using Bacula writes"},
- {"cap", capcmd, "list device capabilities"},
- {"clear", clearcmd, "clear tape errors"},
- {"eod", eodcmd, "go to end of Bacula data for append"},
- {"eom", eomcmd, "go to the physical end of medium"},
- {"fill", fillcmd, "fill tape, write onto second volume"},
- {"unfill", unfillcmd, "read filled tape"},
- {"fsf", fsfcmd, "forward space a file"},
- {"fsr", fsrcmd, "forward space a record"},
- {"help", helpcmd, "print this command"},
- {"label", labelcmd, "write a Bacula label to the tape"},
- {"load", loadcmd, "load a tape"},
- {"quit", quitcmd, "quit btape"},
- {"rawfill", rawfill_cmd, "use write() to fill tape"},
- {"readlabel", readlabelcmd, "read and print the Bacula tape label"},
- {"rectest", rectestcmd, "test record handling functions"},
- {"rewind", rewindcmd, "rewind the tape"},
- {"scan", scancmd, "read() tape block by block to EOT and report"},
- {"scanblocks", scan_blocks, "Bacula read block by block to EOT and report"},
- {"status", statcmd, "print tape status"},
- {"test", testcmd, "General test Bacula tape functions"},
- {"weof", weofcmd, "write an EOF on the tape"},
- {"wr", wrcmd, "write a single Bacula block"},
- {"rr", rrcmd, "read a single record"},
- {"qfill", qfillcmd, "quick fill command"},
+ {N_("autochanger"),autochangercmd, _("test autochanger")},
+ {N_("bsf"), bsfcmd, _("backspace file")},
+ {N_("bsr"), bsrcmd, _("backspace record")},
+ {N_("bfill"), bfill_cmd, _("fill tape using Bacula writes")},
+ {N_("cap"), capcmd, _("list device capabilities")},
+ {N_("clear"), clearcmd, _("clear tape errors")},
+ {N_("eod"), eodcmd, _("go to end of Bacula data for append")},
+ {N_("eom"), eomcmd, _("go to the physical end of medium")},
+ {N_("fill"), fillcmd, _("fill tape, write onto second volume")},
+ {N_("unfill"), unfillcmd, _("read filled tape")},
+ {N_("fsf"), fsfcmd, _("forward space a file")},
+ {N_("fsr"), fsrcmd, _("forward space a record")},
+ {N_("help"), helpcmd, _("print this command")},
+ {N_("label"), labelcmd, _("write a Bacula label to the tape")},
+ {N_("load"), loadcmd, _("load a tape")},
+ {N_("quit"), quitcmd, _("quit btape")},
+ {N_("rawfill"), rawfill_cmd, _("use write() to fill tape")},
+ {N_("readlabel"), readlabelcmd, _("read and print the Bacula tape label")},
+ {N_("rectest"), rectestcmd, _("test record handling functions")},
+ {N_("rewind"), rewindcmd, _("rewind the tape")},
+ {N_("scan"), scancmd, _("read() tape block by block to EOT and report")},
+ {N_("scanblocks"),scan_blocks, _("Bacula read block by block to EOT and report")},
+ {N_("status"), statcmd, _("print tape status")},
+ {N_("test"), testcmd, _("General test Bacula tape functions")},
+ {N_("weof"), weofcmd, _("write an EOF on the tape")},
+ {N_("wr"), wrcmd, _("write a single Bacula block")},
+ {N_("rr"), rrcmd, _("read a single record")},
+ {N_("qfill"), qfillcmd, _("quick fill command")}
};
#define comsize (sizeof(commands)/sizeof(struct cmdstruct))
{
fprintf(stderr, _(
"Copyright (C) 2000-2005 Kern Sibbald.\n"
-"\nVersion: " VERSION " (" BDATE ")\n\n"
+"\nVersion: %s (%s)\n\n"
"Usage: btape <options> <device_name>\n"
" -b <file> specify bootstrap file\n"
" -c <file> set configuration file to file\n"
" -s turn off signals\n"
" -v be verbose\n"
" -? print this message.\n"
-"\n"));
+"\n"), VERSION, BDATE);
}
if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
offline_dev(dev);
}
- force_close_dev(dev);
+ force_close_device(dev);
Pmsg1(-1, "%s", dev->errmsg); /* print reason */
if (dcr->VolumeName[0] == 0 || strcmp(dcr->VolumeName, "TestVolume2") == 0) {
- fprintf(stderr, "Mount second Volume on device %s and press return when ready: ",
+ fprintf(stderr, _("Mount second Volume on device %s and press return when ready: "),
dev->print_name());
} else {
- fprintf(stderr, "Mount Volume \"%s\" on device %s and press return when ready: ",
+ fprintf(stderr, _("Mount Volume \"%s\" on device %s and press return when ready: "),
dcr->VolumeName, dev->print_name());
}
getchar();
}
autochanger = autoload_device(dcr, 1, NULL);
if (!autochanger) {
- force_close_dev(dev);
- fprintf(stderr, "Mount blank Volume on device %s and press return when ready: ",
+ force_close_device(dev);
+ fprintf(stderr, _("Mount blank Volume on device %s and press return when ready: "),
dev->print_name());
getchar();
}
DEV_BLOCK *block = dcr->block;
Dmsg0(20, "Enter my_mount_next_read_volume\n");
- Pmsg1(000, "End of Volume \"%s\"\n", dcr->VolumeName);
+ Pmsg1(000, _("End of Volume \"%s\"\n"), dcr->VolumeName);
if (LastBlock != block->BlockNumber) {
VolBytes += block->block_len;
now = 1;
}
kbs = (double)VolBytes / (1000.0 * (double)now);
- Pmsg3(-1, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
+ Pmsg3(-1, _("Read block=%u, VolBytes=%s rate=%.1f KB/s\n"), block->BlockNumber,
edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
if (strcmp(dcr->VolumeName, "TestVolume2") == 0) {
return false;
}
- free_vol_list(jcr);
+ free_restore_volume_list(jcr);
set_volume_name("TestVolume2", 2);
jcr->bsr = NULL;
- create_vol_list(jcr);
- close_dev(dev);
+ create_restore_volume_list(jcr);
+ close_device(dev);
dev->clear_read();
if (!acquire_device_for_read(dcr)) {
- Pmsg2(0, "Cannot open Dev=%s, Vol=%s\n", dev->print_name(), dcr->VolumeName);
+ Pmsg2(0, _("Cannot open Dev=%s, Vol=%s\n"), dev->print_name(), dcr->VolumeName);
return false;
}
return true; /* next volume mounted */
bstrncpy(dcr->VolumeName, VolName, sizeof(dcr->VolumeName));
dcr->VolCatInfo.Slot = volnum;
}
+
projects / bacula / bacula / blobdiff