DEVICE *dev = NULL;
DEVRES *device = NULL;
-
+
/* Forward referenced subroutines */
static void do_tape_cmds();
static void helpcmd();
static uint64_t VolBytes;
static time_t now;
static double kbs;
-static long file_index;
+static int32_t file_index;
static int end_of_tape = 0;
static uint32_t LastBlock = 0;
static uint32_t eot_block;
/*********************************************************************
*
- * Main Bacula Pool Creation Program
+ * Main Bacula Pool Creation Program
*
*/
int main(int argc, char *argv[])
/* Sanity checks */
if (TAPE_BSIZE % DEV_BSIZE != 0 || TAPE_BSIZE / DEV_BSIZE == 0) {
Emsg2(M_ABORT, 0, "Tape block size (%d) not multiple of system size (%d)\n",
- TAPE_BSIZE, DEV_BSIZE);
+ TAPE_BSIZE, DEV_BSIZE);
}
if (TAPE_BSIZE != (1 << (ffs(TAPE_BSIZE)-1))) {
Emsg1(M_ABORT, 0, "Tape block size (%d) is not a power of 2\n", TAPE_BSIZE);
while ((ch = getopt(argc, argv, "b:c:d:sv?")) != -1) {
switch (ch) {
case 'b': /* bootstrap file */
- bsr = parse_bsr(NULL, optarg);
-// dump_bsr(bsr);
- break;
+ bsr = parse_bsr(NULL, optarg);
+// dump_bsr(bsr);
+ break;
case 'c': /* specify config file */
- if (configfile != NULL) {
- free(configfile);
- }
- configfile = bstrdup(optarg);
- break;
+ if (configfile != NULL) {
+ free(configfile);
+ }
+ configfile = bstrdup(optarg);
+ break;
case 'd': /* set debug level */
- debug_level = atoi(optarg);
- if (debug_level <= 0) {
- debug_level = 1;
- }
- break;
+ debug_level = atoi(optarg);
+ if (debug_level <= 0) {
+ debug_level = 1;
+ }
+ break;
case 's':
- signals = FALSE;
- break;
+ signals = FALSE;
+ break;
case 'v':
- verbose++;
- break;
+ verbose++;
+ break;
case '?':
- default:
- helpcmd();
- exit(0);
+ default:
+ helpcmd();
+ exit(0);
}
}
Dmsg0(129, "Opening device.\n");
if (open_dev(dev, jcr->VolumeName, READ_WRITE) < 0) {
Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
- unlock_device(dev);
- free_block(block);
- goto terminate;
+ unlock_device(dev);
+ free_block(block);
+ goto terminate;
}
}
Dmsg1(129, "open_dev %s OK\n", dev_name(dev));
}
term_msg();
- close_memory_pool(); /* free memory in pool */
+ close_memory_pool(); /* free memory in pool */
sm_dump(False);
exit(stat);
LockRes();
for (device=NULL; (device=(DEVRES *)GetNextRes(R_DEVICE, (RES *)device)); ) {
if (strcmp(device->device_name, dev->dev_name) == 0) {
- jcr->device = device; /* Arggg a bit of duplication here */
- device->dev = dev;
- dev->device = device;
- found = 1;
- break;
+ jcr->device = device; /* Arggg a bit of duplication here */
+ device->dev = dev;
+ dev->device = device;
+ found = 1;
+ break;
}
}
UnlockRes();
strcpy(cmd, VolumeName);
} else {
if (!get_cmd("Enter Volume Name: ")) {
- return;
+ return;
}
}
-
+
if (!(dev->state & ST_OPENED)) {
if (!open_device(dev)) {
Pmsg1(0, "Device open failed. ERR=%s\n", strerror_dev(dev));
}
/*
- * Read the tape label
+ * Read the tape label
*/
static void readlabelcmd()
{
switch (stat) {
case VOL_NO_LABEL:
Pmsg0(0, "Volume has no label.\n");
- break;
+ break;
case VOL_OK:
Pmsg0(0, "Volume label read correctly.\n");
- break;
+ break;
case VOL_IO_ERROR:
Pmsg1(0, "I/O error on device: ERR=%s", strerror_dev(dev));
- break;
+ break;
case VOL_NAME_ERROR:
Pmsg0(0, "Volume name error\n");
- break;
+ break;
case VOL_CREATE_ERROR:
Pmsg1(0, "Error creating label. ERR=%s", strerror_dev(dev));
- break;
+ break;
case VOL_VERSION_ERROR:
Pmsg0(0, "Volume version error.\n");
- break;
+ break;
case VOL_LABEL_ERROR:
Pmsg0(0, "Bad Volume label type.\n");
- break;
+ break;
default:
Pmsg0(0, "Unknown error.\n");
- break;
+ break;
}
debug_level = 20;
}
-/* Go to the end of the medium -- raw command
+/* Go to the end of the medium -- raw command
* The idea was orginally that the end of the Bacula
* medium would be flagged differently. This is not
* currently the case. So, this is identical to the
rec->data_len = i;
sm_check(__FILE__, __LINE__, False);
if (write_record_to_block(block, rec)) {
- empty_block(block);
- blkno++;
+ empty_block(block);
+ blkno++;
Pmsg2(0, "Block %d i=%d\n", blkno, i);
} else {
- break;
+ break;
}
sm_check(__FILE__, __LINE__, False);
}
for (int i=0; i<len; i++) {
if (rec->data[i] != 3) {
Pmsg0(0, _("Bad data in record. Test failed!\n"));
- goto bail_out;
+ goto bail_out;
}
}
Pmsg0(0, _("\nBlock re-read correct. Test succeeded!\n"));
" and three records in file 2\n\n"));
rewindcmd();
wrcmd();
- weofcmd(); /* end file 0 */
+ weofcmd(); /* end file 0 */
wrcmd();
wrcmd();
- weofcmd(); /* end file 1 */
+ weofcmd(); /* end file 1 */
wrcmd();
wrcmd();
wrcmd();
- weofcmd(); /* end file 2 */
+ weofcmd(); /* end file 2 */
rewindcmd();
Pmsg0(0, _("Now moving to end of medium.\n"));
eodcmd();
int stat;
stat = append_test();
- if (stat == 1) { /* OK get out */
+ if (stat == 1) { /* OK get out */
goto all_done;
}
- if (stat == -1) { /* first test failed */
+ if (stat == -1) { /* first test failed */
if (dev_cap(dev, CAP_EOM)) {
Pmsg0(-1, "\nAppend test failed. Attempting again.\n"
"Setting \"Hardware End of Medium = no\" and retrying append test.\n\n");
- dev->capabilities &= ~CAP_EOM; /* turn off eom */
- stat = append_test();
- if (stat == 1) {
+ dev->capabilities &= ~CAP_EOM; /* turn off eom */
+ stat = append_test();
+ if (stat == 1) {
Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n\n"
"to your Device resource in the Storage conf file.\n");
- goto all_done;
- }
- if (stat == -1) {
+ goto all_done;
+ }
+ if (stat == -1) {
Pmsg0(-1, "\n\nThat appears not to have corrected the problem.\n");
- goto all_done;
- }
- /* Wrong count after append */
- if (stat == -2) {
+ goto all_done;
+ }
+ /* Wrong count after append */
+ if (stat == -2) {
Pmsg0(-1, "\n\nIt looks like the append failed. Attempting again.\n"
"Setting \"BSF at EOM = yes\" and retrying append test.\n");
- dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
- stat = append_test();
- if (stat == 1) {
+ dev->capabilities |= CAP_BSFATEOM; /* backspace on eom */
+ stat = append_test();
+ if (stat == 1) {
Pmsg0(-1, "\n\nIt looks like the test worked this time, please add:\n\n"
" Hardware End of Medium = No\n"
" BSR at EOM = yes\n\n"
"to your Device resource in the Storage conf file.\n");
- goto all_done;
- }
- }
+ goto all_done;
+ }
+ }
Pmsg0(-1, "\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
"Unable to correct the problem. You MUST fix this\n"
Pmsg1(0, _("Starting scan at file %u\n"), dev->file);
for (;;) {
if ((stat = read(dev->fd, buf, sizeof(buf))) < 0) {
- clrerror_dev(dev, -1);
+ clrerror_dev(dev, -1);
Mmsg2(&dev->errmsg, "read error on %s. ERR=%s.\n",
- dev->dev_name, strerror(dev->dev_errno));
+ dev->dev_name, strerror(dev->dev_errno));
Pmsg2(0, "Bad status from read %d. ERR=%s\n", stat, strerror_dev(dev));
- if (blocks > 0)
+ if (blocks > 0)
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- return;
+ return;
}
Dmsg1(200, "read status = %d\n", stat);
/* sleep(1); */
if (stat != block_size) {
- update_pos_dev(dev);
- if (blocks > 0) {
+ update_pos_dev(dev);
+ if (blocks > 0) {
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- blocks = 0;
- }
- block_size = stat;
+ blocks = 0;
+ }
+ block_size = stat;
}
- if (stat == 0) { /* EOF */
- update_pos_dev(dev);
+ if (stat == 0) { /* EOF */
+ update_pos_dev(dev);
printf("End of File mark.\n");
- /* Two reads of zero means end of tape */
- if (dev->state & ST_EOF)
- dev->state |= ST_EOT;
- else {
- dev->state |= ST_EOF;
- dev->file++;
- }
- if (dev->state & ST_EOT) {
+ /* Two reads of zero means end of tape */
+ if (dev->state & ST_EOF)
+ dev->state |= ST_EOT;
+ else {
+ dev->state |= ST_EOF;
+ dev->file++;
+ }
+ if (dev->state & ST_EOT) {
printf("End of tape\n");
- break;
- }
- } else { /* Got data */
- dev->state &= ~ST_EOF;
- blocks++;
- tot_blocks++;
- bytes += stat;
+ break;
+ }
+ } else { /* Got data */
+ dev->state &= ~ST_EOF;
+ blocks++;
+ tot_blocks++;
+ bytes += stat;
}
}
update_pos_dev(dev);
for (;;) {
if (!read_block_from_device(jcr, dev, block, NO_BLOCK_NUMBER_CHECK)) {
Dmsg1(100, "!read_block(): ERR=%s\n", strerror_dev(dev));
- if (dev->state & ST_EOT) {
- if (blocks > 0) {
+ if (dev->state & ST_EOT) {
+ if (blocks > 0) {
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- blocks = 0;
- }
- goto bail_out;
- }
- if (dev->state & ST_EOF) {
- if (blocks > 0) {
+ blocks = 0;
+ }
+ goto bail_out;
+ }
+ if (dev->state & ST_EOF) {
+ if (blocks > 0) {
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- blocks = 0;
- }
+ blocks = 0;
+ }
printf(_("End of File mark.\n"));
- continue;
- }
- if (dev->state & ST_SHORT) {
- if (blocks > 0) {
+ continue;
+ }
+ if (dev->state & ST_SHORT) {
+ if (blocks > 0) {
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- blocks = 0;
- }
+ blocks = 0;
+ }
printf(_("Short block read.\n"));
- continue;
- }
+ continue;
+ }
printf(_("Error reading block. ERR=%s\n"), strerror_dev(dev));
- goto bail_out;
+ goto bail_out;
}
if (block->block_len != block_size) {
- if (blocks > 0) {
+ if (blocks > 0) {
printf("%d block%s of %d bytes in file %d\n",
blocks, blocks>1?"s":"", block_size, dev->file);
- blocks = 0;
- }
- block_size = block->block_len;
+ blocks = 0;
+ }
+ block_size = block->block_len;
}
blocks++;
tot_blocks++;
bytes += block->block_len;
Dmsg5(100, "Blk=%u blen=%u bVer=%d SessId=%u SessTim=%u\n",
- block->BlockNumber, block->block_len, block->BlockVer,
- block->VolSessionId, block->VolSessionTime);
+ block->BlockNumber, block->block_len, block->BlockVer,
+ block->VolSessionId, block->VolSessionTime);
if (verbose == 1) {
- DEV_RECORD *rec = new_record();
- read_record_from_block(block, rec);
+ DEV_RECORD *rec = new_record();
+ read_record_from_block(block, rec);
Pmsg7(-1, "Block: %u blen=%u First rec FI=%s SessId=%u SessTim=%u Strm=%s rlen=%d\n",
- block->BlockNumber, block->block_len,
- FI_to_ascii(rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
- stream_to_ascii(rec->Stream, rec->FileIndex), rec->data_len);
- rec->remainder = 0;
- free_record(rec);
+ block->BlockNumber, block->block_len,
+ FI_to_ascii(rec->FileIndex), rec->VolSessionId, rec->VolSessionTime,
+ stream_to_ascii(rec->Stream, rec->FileIndex), rec->data_len);
+ rec->remainder = 0;
+ free_record(rec);
} else if (verbose > 1) {
dump_block(block, "");
}
/*
* First we label the tape, then we fill
* it with data get a new tape and write a few blocks.
- */
+ */
static void fillcmd()
{
DEV_RECORD rec;
/*
* Acquire output device for writing. Note, after acquiring a
- * device, we MUST release it, which is done at the end of this
- * subroutine.
+ * device, we MUST release it, which is done at the end of this
+ * subroutine.
*/
Dmsg0(100, "just before acquire_device\n");
if (!(dev=acquire_device_for_append(jcr, dev, block))) {
if (!write_session_label(jcr, block, SOS_LABEL)) {
set_jcr_job_status(jcr, JS_ErrorTerminated);
Jmsg1(jcr, M_FATAL, 0, _("Write session label failed. ERR=%s\n"),
- strerror_dev(dev));
+ strerror_dev(dev));
ok = FALSE;
}
Pmsg0(-1, "Wrote Start Of Session label.\n");
* Generate data as if from File daemon, write to device
*/
jcr->VolFirstIndex = 0;
- time(&jcr->run_time); /* start counting time for rates */
+ time(&jcr->run_time); /* start counting time for rates */
Pmsg0(-1, "Begin writing records to first tape ...\n");
for (file_index = 0; ok && !job_canceled(jcr); ) {
rec.VolSessionId = jcr->VolSessionId;
*/
uint64_t *lp = (uint64_t *)rec.data;
for (uint32_t i=0; i < (rec.data_len-sizeof(uint64_t))/sizeof(uint64_t); i++) {
- *lp++ = ~file_index;
+ *lp++ = ~file_index;
}
Dmsg4(250, "before writ_rec FI=%d SessId=%d Strm=%s len=%d\n",
- rec.FileIndex, rec.VolSessionId, stream_to_ascii(rec.Stream, rec.FileIndex),
- rec.data_len);
+ rec.FileIndex, rec.VolSessionId, stream_to_ascii(rec.Stream, rec.FileIndex),
+ rec.data_len);
while (!write_record_to_block(block, &rec)) {
- /*
- * When we get here we have just filled a block
- */
+ /*
+ * When we get here we have just filled a block
+ */
Dmsg2(150, "!write_record_to_block data_len=%d rem=%d\n", rec.data_len,
- rec.remainder);
-
- /* Write block to tape */
- if (!flush_block(block, 1)) {
- return;
- }
-
- /* Every 5000 blocks (approx 322MB) report where we are.
- */
- if ((block->BlockNumber % 5000) == 0) {
- now = time(NULL);
- now -= jcr->run_time;
- if (now <= 0) {
- now = 1;
- }
- kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
+ rec.remainder);
+
+ /* Write block to tape */
+ if (!flush_block(block, 1)) {
+ return;
+ }
+
+ /* Every 5000 blocks (approx 322MB) report where we are.
+ */
+ if ((block->BlockNumber % 5000) == 0) {
+ now = time(NULL);
+ now -= jcr->run_time;
+ if (now <= 0) {
+ now = 1;
+ }
+ kbs = (double)dev->VolCatInfo.VolCatBytes / (1000.0 * (double)now);
Pmsg3(-1, "Wrote block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
- edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
- }
- /* Every 15000 blocks (approx 1GB) write an EOF.
- */
- if ((block->BlockNumber % 15000) == 0) {
+ edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), (float)kbs);
+ }
+ /* Every 15000 blocks (approx 1GB) write an EOF.
+ */
+ if ((block->BlockNumber % 15000) == 0) {
Pmsg0(-1, "Flush block, write EOF\n");
- flush_block(block, 0);
- weof_dev(dev, 1);
- }
-
- /* Get out after writing 10 blocks to the second tape */
- if (++BlockNumber > 10 && stop != 0) { /* get out */
- break;
- }
+ flush_block(block, 0);
+ weof_dev(dev, 1);
+ }
+
+ /* Get out after writing 10 blocks to the second tape */
+ if (++BlockNumber > 10 && stop != 0) { /* get out */
+ break;
+ }
}
if (!ok) {
Pmsg0(000, _("Not OK\n"));
- break;
+ break;
}
jcr->JobBytes += rec.data_len; /* increment bytes this job */
Dmsg4(190, "write_record FI=%s SessId=%d Strm=%s len=%d\n",
- FI_to_ascii(rec.FileIndex), rec.VolSessionId,
- stream_to_ascii(rec.Stream, rec.FileIndex), rec.data_len);
+ FI_to_ascii(rec.FileIndex), rec.VolSessionId,
+ stream_to_ascii(rec.Stream, rec.FileIndex), rec.data_len);
/* Get out after writing 10 blocks to the second tape */
- if (BlockNumber > 10 && stop != 0) { /* get out */
+ if (BlockNumber > 10 && stop != 0) { /* get out */
Pmsg0(-1, "Done writing ...\n");
- break;
+ break;
}
}
if (stop > 0) {
Dmsg0(100, "Write_end_session_label()\n");
/* Create Job status for end of session label */
if (!job_canceled(jcr) && ok) {
- set_jcr_job_status(jcr, JS_Terminated);
+ set_jcr_job_status(jcr, JS_Terminated);
} else if (!ok) {
- set_jcr_job_status(jcr, JS_ErrorTerminated);
+ set_jcr_job_status(jcr, JS_ErrorTerminated);
}
if (!write_session_label(jcr, block, EOS_LABEL)) {
Pmsg1(000, _("Error writting end session label. ERR=%s\n"), strerror_dev(dev));
- ok = FALSE;
+ ok = FALSE;
}
/* Write out final block of this session */
if (!write_block_to_device(jcr, dev, block)) {
Pmsg0(-1, _("Set ok=FALSE after write_block_to_device.\n"));
- ok = FALSE;
+ ok = FALSE;
}
Pmsg0(-1, "Wrote End Of Session label.\n");
}
if (!simple) {
/* Close device so user can use autochanger if desired */
if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
+ offline_dev(dev);
}
force_close_dev(dev);
get_cmd(_("Mount first tape. Press enter when ready: "));
dev->state &= ~ST_READ;
if (!acquire_device_for_read(jcr, dev, block)) {
Pmsg1(-1, "%s", dev->errmsg);
- return;
+ return;
}
}
- time(&jcr->run_time); /* start counting time for rates */
+ time(&jcr->run_time); /* start counting time for rates */
stop = 0;
file_index = 0;
if (!simple) {
Pmsg0(000, "Rewinding tape ...\n");
if (!rewind_dev(dev)) {
Pmsg1(-1, _("Error rewinding: ERR=%s\n"), strerror_dev(dev));
- goto bail_out;
+ goto bail_out;
}
if (last_file > 0) {
Pmsg1(000, "Forward spacing to last file=%u\n", last_file);
- if (!fsf_dev(dev, last_file)) {
+ if (!fsf_dev(dev, last_file)) {
Pmsg1(-1, _("Error in FSF: ERR=%s\n"), strerror_dev(dev));
- goto bail_out;
- }
+ goto bail_out;
+ }
}
Pmsg1(-1, _("Forward space to file %u complete. Reading blocks ...\n"),
- last_file);
+ last_file);
Pmsg1(-1, _("Now reading to block %u.\n"), last_block_num);
for (uint32_t i=0; i <= last_block_num; i++) {
- if (!read_block_from_device(jcr, dev, block, NO_BLOCK_NUMBER_CHECK)) {
+ if (!read_block_from_device(jcr, dev, block, NO_BLOCK_NUMBER_CHECK)) {
Pmsg1(-1, _("Error reading blocks: ERR=%s\n"), strerror_dev(dev));
Pmsg2(-1, _("Wanted block %u error at block %u\n"), last_block_num, i);
- goto bail_out;
- }
- if (i > 0 && i % 1000 == 0) {
+ goto bail_out;
+ }
+ if (i > 0 && i % 1000 == 0) {
Pmsg1(-1, _("At block %u\n"), i);
- }
+ }
}
if (last_block) {
dump_block(last_block, _("Last block written"));
{
SESSION_LABEL label;
- if (stop > 1 && !dumped) { /* on second tape */
+ if (stop > 1 && !dumped) { /* on second tape */
dumped = 1;
dump_block(block, "First block on second tape");
Pmsg4(-1, "Blk: FileIndex=%d: block=%u size=%d vol=%s\n",
- rec->FileIndex, block->BlockNumber, block->block_len, dev->VolHdr.VolName);
+ rec->FileIndex, block->BlockNumber, block->block_len, dev->VolHdr.VolName);
Pmsg6(-1, " Rec: VId=%d VT=%d FI=%s Strm=%s len=%d state=%x\n",
- rec->VolSessionId, rec->VolSessionTime,
- FI_to_ascii(rec->FileIndex), stream_to_ascii(rec->Stream, rec->FileIndex),
- rec->data_len, rec->state);
+ rec->VolSessionId, rec->VolSessionTime,
+ FI_to_ascii(rec->FileIndex), stream_to_ascii(rec->Stream, rec->FileIndex),
+ rec->data_len, rec->state);
}
if (rec->FileIndex < 0) {
if (verbose > 1) {
- dump_label_record(dev, rec, 1);
+ dump_label_record(dev, rec, 1);
}
switch (rec->FileIndex) {
case PRE_LABEL:
Pmsg0(-1, "Volume is prelabeled. This tape cannot be scanned.\n");
- return;
+ return;
case VOL_LABEL:
- unser_volume_label(dev, rec);
+ unser_volume_label(dev, rec);
Pmsg3(-1, "VOL_LABEL: block=%u size=%d vol=%s\n", block->BlockNumber,
- block->block_len, dev->VolHdr.VolName);
- stop++;
- break;
+ block->block_len, dev->VolHdr.VolName);
+ stop++;
+ break;
case SOS_LABEL:
- unser_session_label(&label, rec);
+ unser_session_label(&label, rec);
Pmsg1(-1, "SOS_LABEL: JobId=%u\n", label.JobId);
- break;
+ break;
case EOS_LABEL:
- unser_session_label(&label, rec);
+ unser_session_label(&label, rec);
Pmsg2(-1, "EOS_LABEL: block=%u JobId=%u\n", block->BlockNumber,
- label.JobId);
- break;
+ label.JobId);
+ break;
case EOM_LABEL:
Pmsg0(-1, "EOM_LABEL:\n");
- break;
- case EOT_LABEL: /* end of all tapes */
- char ec1[50];
-
- if (LastBlock != block->BlockNumber) {
- VolBytes += block->block_len;
- }
- LastBlock = block->BlockNumber;
- now = time(NULL);
- now -= jcr->run_time;
- if (now <= 0) {
- now = 1;
- }
- kbs = (double)VolBytes / (1000 * now);
+ break;
+ case EOT_LABEL: /* end of all tapes */
+ char ec1[50];
+
+ if (LastBlock != block->BlockNumber) {
+ VolBytes += block->block_len;
+ }
+ LastBlock = block->BlockNumber;
+ now = time(NULL);
+ now -= jcr->run_time;
+ if (now <= 0) {
+ now = 1;
+ }
+ kbs = (double)VolBytes / (1000 * now);
Pmsg3(000, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
- edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
+ edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
Pmsg0(000, "End of all tapes.\n");
- break;
+ break;
default:
- break;
+ break;
}
return;
}
if (++file_index != rec->FileIndex) {
Pmsg3(000, "Incorrect FileIndex in Block %u. Got %d, expected %d.\n",
- block->BlockNumber, rec->FileIndex, file_index);
+ block->BlockNumber, rec->FileIndex, file_index);
}
/*
* Now check that the right data is in the record.
for (uint32_t i=0; i < (REC_SIZE-sizeof(uint64_t))/sizeof(uint64_t); i++) {
if (*lp++ != val) {
Pmsg2(000, "Record %d contains bad data in Block %u.\n",
- file_index, block->BlockNumber);
- break;
+ file_index, block->BlockNumber);
+ break;
}
}
now = time(NULL);
now -= jcr->run_time;
if (now <= 0) {
- now = 1;
+ now = 1;
}
kbs = (double)VolBytes / (1000 * now);
Pmsg3(000, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
- edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
+ edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
}
LastBlock = block->BlockNumber;
if (end_of_tape) {
this_file = dev->file;
this_block_num = dev->block_num;
if (!write_block_to_dev(jcr, dev, block)) {
- Pmsg0(000, strerror_dev(dev));
+ Pmsg0(000, strerror_dev(dev));
Pmsg3(000, "Block not written: FileIndex=%u Block=%u Size=%u\n",
- (unsigned)file_index, block->BlockNumber, block->block_len);
+ (unsigned)file_index, block->BlockNumber, block->block_len);
Pmsg2(000, "last_block_num=%u this_block_num=%d\n", last_block_num,
- this_block_num);
+ this_block_num);
if (dump) {
dump_block(block, "Block not written");
}
if (stop == 0) {
- eot_block = block->BlockNumber;
- eot_block_len = block->block_len;
- eot_FileIndex = file_index;
+ eot_block = block->BlockNumber;
+ eot_block_len = block->block_len;
+ eot_FileIndex = file_index;
}
now = time(NULL);
now -= jcr->run_time;
if (now <= 0) {
- now = 1;
+ now = 1;
}
kbs = (double)dev->VolCatInfo.VolCatBytes / (1000 * now);
vol_size = dev->VolCatInfo.VolCatBytes;
Pmsg2(000, "End of tape. VolumeCapacity=%s. Write rate = %.1f KB/s\n",
- edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);
+ edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, ec1), kbs);
if (simple) {
- stop = -1; /* stop, but do simplified test */
+ stop = -1; /* stop, but do simplified test */
} else {
- /* Full test in progress */
- if (!fixup_device_block_write_error(jcr, dev, block)) {
+ /* Full test in progress */
+ if (!fixup_device_block_write_error(jcr, dev, block)) {
Pmsg1(000, _("Cannot fixup device error. %s\n"), strerror_dev(dev));
- ok = FALSE;
- unlock_device(dev);
- return 0;
- }
- stop = 1;
- BlockNumber = 0; /* start counting for second tape */
+ ok = FALSE;
+ unlock_device(dev);
+ return 0;
+ }
+ stop = 1;
+ BlockNumber = 0; /* start counting for second tape */
}
unlock_device(dev);
- return 1; /* end of tape reached */
+ return 1; /* end of tape reached */
}
/*
/*
* First we label the tape, then we fill
* it with data get a new tape and write a few blocks.
- */
+ */
static void qfillcmd()
{
DEV_BLOCK *block;
}
if (!write_record_to_block(block, rec)) {
Pmsg0(0, _("Error writing record to block.\n"));
- goto bail_out;
+ goto bail_out;
}
if (!write_block_to_dev(jcr, dev, block)) {
Pmsg0(0, _("Error writing block to device.\n"));
- goto bail_out;
+ goto bail_out;
}
}
printf("\n");
*p = block_num;
stat = write(dev->fd, block->buf, block->buf_len);
if (stat == (int)block->buf_len) {
- if ((block_num++ % 100) == 0) {
+ if ((block_num++ % 100) == 0) {
printf("+");
- }
- continue;
+ }
+ continue;
}
break;
}
{"wr", wrcmd, "write a single Bacula block"},
{"rr", rrcmd, "read a single record"},
{"qfill", qfillcmd, "quick fill command"},
- };
+ };
#define comsize (sizeof(commands)/sizeof(struct cmdstruct))
static void
sm_check(__FILE__, __LINE__, False);
found = 0;
for (i=0; i<comsize; i++) /* search for command */
- if (fstrsch(cmd, commands[i].key)) {
- (*commands[i].func)(); /* go execute command */
- found = 1;
- break;
- }
+ if (fstrsch(cmd, commands[i].key)) {
+ (*commands[i].func)(); /* go execute command */
+ found = 1;
+ break;
+ }
if (!found)
Pmsg1(0, _("%s is an illegal command\n"), cmd);
if (quit)
- break;
+ break;
}
}
}
-/*
+/*
* Get next input command from terminal. This
* routine is REALLY primitive, and should be enhanced
* to have correct backspacing, etc.
cmd[i] = 0;
while ((ch = fgetc(stdin)) != EOF) {
if (ch == '\n') {
- strip_trailing_junk(cmd);
- return 1;
+ strip_trailing_junk(cmd);
+ return 1;
} else if (ch == 4 || ch == 0xd3 || ch == 0x8) {
- if (i > 0)
- cmd[--i] = 0;
- continue;
+ if (i > 0)
+ cmd[--i] = 0;
+ continue;
}
-
+
cmd[i++] = ch;
cmd[i] = 0;
}
}
/* Dummies to replace askdir.c */
-int dir_get_volume_info(JCR *jcr, enum get_vol_info_rw writing) { return 1;}
-int dir_update_volume_info(JCR *jcr, VOLUME_CAT_INFO *vol, int relabel) { return 1; }
-int dir_create_jobmedia_record(JCR *jcr) { return 1; }
-int dir_update_file_attributes(JCR *jcr, DEV_RECORD *rec) { return 1;}
-int dir_send_job_status(JCR *jcr) {return 1;}
+int dir_get_volume_info(JCR *jcr, enum get_vol_info_rw writing) { return 1;}
+int dir_update_volume_info(JCR *jcr, VOLUME_CAT_INFO *vol, int relabel) { return 1; }
+int dir_create_jobmedia_record(JCR *jcr) { return 1; }
+int dir_update_file_attributes(JCR *jcr, DEV_RECORD *rec) { return 1;}
+int dir_send_job_status(JCR *jcr) {return 1;}
-int dir_find_next_appendable_volume(JCR *jcr)
+int dir_find_next_appendable_volume(JCR *jcr)
{
return 1;
}
Pmsg1(-1, "%s", dev->errmsg); /* print reason */
fprintf(stderr, "Mount Volume \"%s\" on device %s and press return when ready: ",
jcr->VolumeName, dev_name(dev));
- getchar();
+ getchar();
return 1;
}
force_close_dev(dev);
fprintf(stderr, "Mount next Volume on device %s and press return when ready: ",
dev_name(dev));
- getchar();
+ getchar();
set_volume_name("TestVolume2", 2);
labelcmd();
VolumeName = NULL;
}
kbs = (double)VolBytes / (1000.0 * (double)now);
Pmsg3(-1, "Read block=%u, VolBytes=%s rate=%.1f KB/s\n", block->BlockNumber,
- edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
+ edit_uint64_with_commas(VolBytes, ec1), (float)kbs);
if (strcmp(jcr->VolumeName, "TestVolume2") == 0) {
end_of_tape = 1;
Pmsg2(0, "Cannot open Dev=%s, Vol=%s\n", dev_name(dev), jcr->VolumeName);
return 0;
}
- return 1; /* next volume mounted */
+ return 1; /* next volume mounted */
}
static void set_volume_name(char *VolName, int volnum)
projects / bacula / bacula / blobdiff