/*
- Bacula® - The Network Backup Solution
-
- Copyright (C) 2000-2009 Free Software Foundation Europe e.V.
-
- The main author of Bacula is Kern Sibbald, with contributions from
- many others, a complete list can be found in the file AUTHORS.
- This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
- License as published by the Free Software Foundation and included
- in the file LICENSE.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA.
-
- Bacula® is a registered trademark of Kern Sibbald.
- The licensor of Bacula is the Free Software Foundation Europe
- (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
- Switzerland, email:ftf@fsfeurope.org.
+ Bacula(R) - The Network Backup Solution
+
+ Copyright (C) 2000-2015 Kern Sibbald
+ Copyright (C) 2000-2014 Free Software Foundation Europe e.V.
+
+ The original author of Bacula is Kern Sibbald, with contributions
+ from many others, a complete list can be found in the file AUTHORS.
+
+ You may use this file and others of this release according to the
+ license defined in the LICENSE file, which includes the Affero General
+ Public License, v3.0 ("AGPLv3") and some additional permissions and
+ terms pursuant to its AGPLv3 Section 7.
+
+ This notice must be preserved when any source code is
+ conveyed and/or propagated.
+
+ Bacula(R) is a registered trademark of Kern Sibbald.
*/
/*
*
* dev.c -- low level operations on device (storage device)
*
- * Kern Sibbald, MM
+ * written by, Kern Sibbald, MM
*
* NOTE!!!! None of these routines are reentrant. You must
- * use dev->r_dlock() and dev->unlock() at a higher level,
+ * use dev->rLock() and dev->Unlock() at a higher level,
* or use the xxx_device() equivalents. By moving the
* thread synchronization to a higher level, we permit
* the higher level routines to "seize" the device and
* daemon. More complicated coding (double buffering, writer
* thread, ...) is left for a later version.
*
- * Version $Id$
*/
/*
* business with no lost data.
*/
-
#include "bacula.h"
#include "stored.h"
-#ifndef O_NONBLOCK
+#ifndef O_NONBLOCK
#define O_NONBLOCK 0
#endif
+/* Imported functions */
+extern void set_os_device_parameters(DCR *dcr);
+extern bool dev_get_os_pos(DEVICE *dev, struct mtget *mt_stat);
+extern uint32_t status_dev(DEVICE *dev);
+
/* Forward referenced functions */
-void set_os_device_parameters(DCR *dcr);
-static bool dev_get_os_pos(DEVICE *dev, struct mtget *mt_stat);
-static const char *mode_to_str(int mode);
+const char *mode_to_str(int mode);
+DEVICE *m_init_dev(JCR *jcr, DEVRES *device);
+/*
+ * Device types for printing
+ */
+static const char *prt_dev_types[] = {
+ "*none*",
+ "file",
+ "tape",
+ "DVD",
+ "FIFO",
+ "Vtape",
+ "FTP",
+ "VTL"
+};
/*
* Allocate and initialize the DEVICE structure
* is the directory in which the file will be placed.
*
*/
-DEVICE *
-init_dev(JCR *jcr, DEVRES *device)
+DEVICE *init_dev(JCR *jcr, DEVRES *device)
+{
+ generate_global_plugin_event(bsdGlobalEventDeviceInit, device);
+ DEVICE *dev = m_init_dev(jcr, device);
+ return dev;
+}
+
+DEVICE *m_init_dev(JCR *jcr, DEVRES *device)
{
struct stat statp;
int errstat;
DCR *dcr = NULL;
- DEVICE *dev;
+ DEVICE *dev = NULL;
uint32_t max_bs;
-
/* If no device type specified, try to guess */
if (!device->dev_type) {
/* Check that device is available */
if (stat(device->device_name, &statp) < 0) {
berrno be;
- Jmsg2(jcr, M_ERROR, 0, _("Unable to stat device %s: ERR=%s\n"),
+ Jmsg2(jcr, M_ERROR, 0, _("Unable to stat device %s: ERR=%s\n"),
device->device_name, be.bstrerror());
return NULL;
}
} else if (S_ISFIFO(statp.st_mode)) {
device->dev_type = B_FIFO_DEV;
#ifdef USE_VTAPE
- /* must set DeviceType = Vtape
+ /* must set DeviceType = Vtape
* in normal mode, autodetection is disabled
*/
- } else if (S_ISREG(statp.st_mode)) {
+ } else if (S_ISREG(statp.st_mode)) {
device->dev_type = B_VTAPE_DEV;
#endif
} else if (!(device->cap_bits & CAP_REQMOUNT)) {
} else {
device->dev_type = B_DVD_DEV;
}
+ if (strcmp(device->device_name, "/dev/null") == 0) {
+ device->dev_type = B_NULL_DEV;
+ }
+ }
+ switch (device->dev_type) {
+ case B_DVD_DEV:
+ Jmsg0(jcr, M_FATAL, 0, _("DVD support is now deprecated.\n"));
+ return NULL;
+ case B_VTAPE_DEV:
+ dev = New(vtape);
+ break;
+#ifdef USE_FTP
+ case B_FTP_DEV:
+ dev = New(ftp_device);
+ break;
+#endif
+ case B_TAPE_DEV:
+ dev = New(tape_dev);
+ break;
+ case B_FILE_DEV:
+ case B_FIFO_DEV:
+ case B_NULL_DEV:
+ dev = New(file_dev);
+ break;
+ default:
+ return NULL;
}
-
- dev = (DEVICE *)malloc(sizeof(DEVICE));
- memset(dev, 0, sizeof(DEVICE));
dev->clear_slot(); /* unknown */
/* Copy user supplied device parameters from Resource */
Mmsg(dev->prt_name, "\"%s\" (%s)", device->hdr.name, device->device_name);
Dmsg1(400, "Allocate dev=%s\n", dev->print_name());
dev->capabilities = device->cap_bits;
+ dev->min_free_space = device->min_free_space;
dev->min_block_size = device->min_block_size;
dev->max_block_size = device->max_block_size;
dev->max_volume_size = device->max_volume_size;
dev->volume_capacity = device->volume_capacity;
dev->max_rewind_wait = device->max_rewind_wait;
dev->max_open_wait = device->max_open_wait;
- dev->max_open_vols = device->max_open_vols;
dev->vol_poll_interval = device->vol_poll_interval;
dev->max_spool_size = device->max_spool_size;
dev->drive_index = device->drive_index;
+ dev->enabled = device->enabled;
dev->autoselect = device->autoselect;
+ dev->read_only = device->read_only;
dev->dev_type = device->dev_type;
- dev->init_backend();
+ dev->device = device;
if (dev->is_tape()) { /* No parts on tapes */
dev->max_part_size = 0;
} else {
if (dev->vol_poll_interval && dev->vol_poll_interval < 60) {
dev->vol_poll_interval = 60;
}
- /* Link the dev and device structures together */
- dev->device = device;
- device->dev = dev;
+
+ if (!device->dev) {
+ /* The first time we create a DEVICE from the DEVRES, we keep a pointer
+ * to the DEVICE accessible from the DEVRES.
+ */
+ device->dev = dev;
+ }
if (dev->is_fifo()) {
dev->capabilities |= CAP_STREAM; /* set stream device */
}
/* If the device requires mount :
- * - Check that the mount point is available
+ * - Check that the mount point is available
* - Check that (un)mount commands are defined
*/
- if ((dev->is_file() || dev->is_dvd()) && dev->requires_mount()) {
+ if (dev->is_file() && dev->requires_mount()) {
if (!device->mount_point || stat(device->mount_point, &statp) < 0) {
berrno be;
dev->dev_errno = errno;
- Jmsg2(jcr, M_ERROR_TERM, 0, _("Unable to stat mount point %s: ERR=%s\n"),
+ Jmsg2(jcr, M_ERROR_TERM, 0, _("Unable to stat mount point %s: ERR=%s\n"),
device->mount_point, be.bstrerror());
}
-
+
if (!device->mount_command || !device->unmount_command) {
Jmsg0(jcr, M_ERROR_TERM, 0, _("Mount and unmount commands must defined for a device which requires mount.\n"));
}
- }
- if (dev->is_dvd()) {
- if (!device->write_part_command) {
- Jmsg0(jcr, M_ERROR_TERM, 0, _("Write part command must be defined for a device which requires mount.\n"));
- }
+ }
+
+ /* Keep the device ID in the DEVICE struct to identify the hardware */
+ if (dev->is_file() && stat(dev->archive_name(), &statp) == 0) {
+ dev->devno = statp.st_dev;
}
/* Sanity check */
max_bs = dev->max_block_size;
}
if (dev->min_block_size > max_bs) {
- Jmsg(jcr, M_ERROR_TERM, 0, _("Min block size > max on device %s\n"),
+ Jmsg(jcr, M_ERROR_TERM, 0, _("Min block size > max on device %s\n"),
dev->print_name());
}
if (dev->max_block_size > 4096000) {
dev->max_block_size = 0;
}
if (dev->max_block_size % TAPE_BSIZE != 0) {
- Jmsg2(jcr, M_WARNING, 0, _("Max block size %u not multiple of device %s block size.\n"),
- dev->max_block_size, dev->print_name());
+ Jmsg3(jcr, M_WARNING, 0, _("Max block size %u not multiple of device %s block size=%d.\n"),
+ dev->max_block_size, dev->print_name(), TAPE_BSIZE);
}
if (dev->max_volume_size != 0 && dev->max_volume_size < (dev->max_block_size << 4)) {
- Jmsg(jcr, M_ERROR_TERM, 0, _("Max Vol Size < 8 * Max Block Size on device %s\n"),
+ Jmsg(jcr, M_ERROR_TERM, 0, _("Max Vol Size < 8 * Max Block Size for device %s\n"),
dev->print_name());
}
dev->errmsg = get_pool_memory(PM_EMSG);
*dev->errmsg = 0;
- if ((errstat = pthread_mutex_init(&dev->m_mutex, NULL)) != 0) {
+ if ((errstat = dev->init_mutex()) != 0) {
berrno be;
dev->dev_errno = errstat;
Mmsg1(dev->errmsg, _("Unable to init mutex: ERR=%s\n"), be.bstrerror(errstat));
if ((errstat = pthread_mutex_init(&dev->spool_mutex, NULL)) != 0) {
berrno be;
dev->dev_errno = errstat;
- Mmsg1(dev->errmsg, _("Unable to init mutex: ERR=%s\n"), be.bstrerror(errstat));
+ Mmsg1(dev->errmsg, _("Unable to init spool mutex: ERR=%s\n"), be.bstrerror(errstat));
Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
}
- if ((errstat = pthread_mutex_init(&dev->acquire_mutex, NULL)) != 0) {
+ if ((errstat = dev->init_acquire_mutex()) != 0) {
berrno be;
dev->dev_errno = errstat;
- Mmsg1(dev->errmsg, _("Unable to init mutex: ERR=%s\n"), be.bstrerror(errstat));
+ Mmsg1(dev->errmsg, _("Unable to init acquire mutex: ERR=%s\n"), be.bstrerror(errstat));
Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
}
+ if ((errstat = dev->init_read_acquire_mutex()) != 0) {
+ berrno be;
+ dev->dev_errno = errstat;
+ Mmsg1(dev->errmsg, _("Unable to init read acquire mutex: ERR=%s\n"), be.bstrerror(errstat));
+ Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
+ }
+ if ((errstat = dev->init_volcat_mutex()) != 0) {
+ berrno be;
+ dev->dev_errno = errstat;
+ Mmsg1(dev->errmsg, _("Unable to init volcat mutex: ERR=%s\n"), be.bstrerror(errstat));
+ Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
+ }
+ if ((errstat = dev->init_dcrs_mutex()) != 0) {
+ berrno be;
+ dev->dev_errno = errstat;
+ Mmsg1(dev->errmsg, _("Unable to init dcrs mutex: ERR=%s\n"), be.bstrerror(errstat));
+ Jmsg0(jcr, M_ERROR_TERM, 0, dev->errmsg);
+ }
+
+ dev->set_mutex_priorities();
+
#ifdef xxx
if ((errstat = rwl_init(&dev->lock)) != 0) {
berrno be;
dev->attached_dcrs = New(dlist(dcr, &dcr->dev_link));
Dmsg2(100, "init_dev: tape=%d dev_name=%s\n", dev->is_tape(), dev->dev_name);
dev->initiated = true;
-
- return dev;
-}
-
-/* Choose the right backend */
-void DEVICE::init_backend()
-{
-
-#ifdef HAVE_WIN32
- if (is_tape()) {
- d_open = win32_tape_open;
- d_write = win32_tape_write;
- d_close = win32_tape_close;
- d_ioctl = win32_tape_ioctl;
- d_read = win32_tape_read;
-
- } else {
- d_open = ::open;
- d_close = ::close;
- d_ioctl = win32_ioctl; /* dummy function */
- d_write = win32_write; /* win32 read/write are not POSIX */
- d_read = win32_read;
- }
-#else /* POSIX / UNIX Interface */
- if (is_vtape()) { /* test backend */
- d_open = vtape_open; /* vtape isn't available for WIN32 or FreeBSD */
- d_write = vtape_write;
- d_close = vtape_close;
- d_ioctl = vtape_ioctl;
- d_read = vtape_read;
-
- } else { /* tape and file are using normal io */
- d_open = ::open;
- d_write = ::write;
- d_close = ::close;
- d_ioctl = ::ioctl;
- d_read = ::read;
- }
-#endif
+ return dev;
}
/*
* Open the device with the operating system and
* initialize buffer pointers.
*
- * Returns: -1 on error
- * fd on success
+ * Returns: true on success
+ * false on error
*
* Note, for a tape, the VolName is the name we give to the
* volume (not really used here), but for a file, the
* In the case of a file, the full name is the device name
* (archive_name) with the VolName concatenated.
*/
-int
-DEVICE::open(DCR *dcr, int omode)
+bool DEVICE::open(DCR *dcr, int omode)
{
int preserve = 0;
if (is_open()) {
if (openmode == omode) {
- return m_fd;
+ return true;
} else {
+ Dmsg1(200, "Close fd=%d for mode change in open().\n", m_fd);
d_close(m_fd);
clear_opened();
- Dmsg0(100, "Close fd for mode change.\n");
preserve = state & (ST_LABEL|ST_APPEND|ST_READ);
}
}
if (dcr) {
- bstrncpy(VolCatInfo.VolCatName, dcr->VolumeName, sizeof(VolCatInfo.VolCatName));
+ dcr->setVolCatName(dcr->VolumeName);
+ VolCatInfo = dcr->VolCatInfo; /* structure assign */
}
- Dmsg4(100, "open dev: type=%d dev_name=%s vol=%s mode=%s\n", dev_type,
- print_name(), VolCatInfo.VolCatName, mode_to_str(omode));
- state &= ~(ST_LABEL|ST_APPEND|ST_READ|ST_EOT|ST_WEOT|ST_EOF);
+ state &= ~(ST_NOSPACE|ST_LABEL|ST_APPEND|ST_READ|ST_EOT|ST_WEOT|ST_EOF);
label_type = B_BACULA_LABEL;
+
if (is_tape() || is_fifo()) {
open_tape_device(dcr, omode);
- } else if (is_dvd()) {
- Dmsg1(100, "call open_dvd_device mode=%s\n", mode_to_str(omode));
- open_dvd_device(dcr, omode);
+ } else if (is_ftp()) {
+ open_device(dcr, omode);
} else {
Dmsg1(100, "call open_file_device mode=%s\n", mode_to_str(omode));
open_file_device(dcr, omode);
}
state |= preserve; /* reset any important state info */
Dmsg2(100, "preserve=0x%x fd=%d\n", preserve, m_fd);
- return m_fd;
+
+ Dmsg7(100, "open dev: fd=%d dev=%p dcr=%p vol=%s type=%d dev_name=%s mode=%s\n",
+ m_fd, getVolCatName(), this, dcr, dev_type, print_name(), mode_to_str(omode));
+ return m_fd >= 0;
}
-void DEVICE::set_mode(int new_mode)
+void DEVICE::set_mode(int new_mode)
{
switch (new_mode) {
case CREATE_READ_WRITE:
}
}
-/*
- */
-void DEVICE::open_tape_device(DCR *dcr, int omode)
-{
- file_size = 0;
- int timeout = max_open_wait;
-#if !defined(HAVE_WIN32)
- struct mtop mt_com;
- utime_t start_time = time(NULL);
-#endif
-
-
- Dmsg0(100, "Open dev: device is tape\n");
-
- get_autochanger_loaded_slot(dcr);
-
- openmode = omode;
- set_mode(omode);
-
- if (timeout < 1) {
- timeout = 1;
- }
- errno = 0;
- if (is_fifo() && timeout) {
- /* Set open timer */
- tid = start_thread_timer(dcr->jcr, pthread_self(), timeout);
- }
- Dmsg2(100, "Try open %s mode=%s\n", print_name(), mode_to_str(omode));
-#if defined(HAVE_WIN32)
-
- /* Windows Code */
- if ((m_fd = d_open(dev_name, mode)) < 0) {
- dev_errno = errno;
- }
-
-#else
-
- /* UNIX Code */
- /* If busy retry each second for max_open_wait seconds */
- for ( ;; ) {
- /* Try non-blocking open */
- m_fd = d_open(dev_name, mode+O_NONBLOCK);
- if (m_fd < 0) {
- berrno be;
- dev_errno = errno;
- Dmsg5(100, "Open error on %s omode=%d mode=%x errno=%d: ERR=%s\n",
- print_name(), omode, mode, errno, be.bstrerror());
- } else {
- /* Tape open, now rewind it */
- Dmsg0(100, "Rewind after open\n");
- mt_com.mt_op = MTREW;
- mt_com.mt_count = 1;
- /* rewind only if dev is a tape */
- if (is_tape() && (d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com) < 0)) {
- berrno be;
- dev_errno = errno; /* set error status from rewind */
- d_close(m_fd);
- clear_opened();
- Dmsg2(100, "Rewind error on %s close: ERR=%s\n", print_name(),
- be.bstrerror(dev_errno));
- /* If we get busy, device is probably rewinding, try again */
- if (dev_errno != EBUSY) {
- break; /* error -- no medium */
- }
- } else {
- /* Got fd and rewind worked, so we must have medium in drive */
- d_close(m_fd);
- m_fd = d_open(dev_name, mode); /* open normally */
- if (m_fd < 0) {
- berrno be;
- dev_errno = errno;
- Dmsg5(100, "Open error on %s omode=%d mode=%x errno=%d: ERR=%s\n",
- print_name(), omode, mode, errno, be.bstrerror());
- break;
- }
- dev_errno = 0;
- lock_door();
- set_os_device_parameters(dcr); /* do system dependent stuff */
- break; /* Successfully opened and rewound */
- }
- }
- bmicrosleep(5, 0);
- /* Exceed wait time ? */
- if (time(NULL) - start_time >= max_open_wait) {
- break; /* yes, get out */
- }
- }
-#endif
-
- if (!is_open()) {
- berrno be;
- Mmsg2(errmsg, _("Unable to open device %s: ERR=%s\n"),
- print_name(), be.bstrerror(dev_errno));
- Dmsg1(100, "%s", errmsg);
- }
-
- /* Stop any open() timer we started */
- if (tid) {
- stop_thread_timer(tid);
- tid = 0;
- }
- Dmsg1(100, "open dev: tape %d opened\n", m_fd);
-}
-
-
-/*
- * Open a file device
- */
-void DEVICE::open_file_device(DCR *dcr, int omode)
-{
- POOL_MEM archive_name(PM_FNAME);
-
- get_autochanger_loaded_slot(dcr);
-
- /*
- * Handle opening of File Archive (not a tape)
- */
-
- pm_strcpy(archive_name, dev_name);
- /*
- * If this is a virtual autochanger (i.e. changer_res != NULL)
- * we simply use the device name, assuming it has been
- * appropriately setup by the "autochanger".
- */
- if (!device->changer_res || device->changer_command[0] == 0) {
- if (VolCatInfo.VolCatName[0] == 0) {
- Mmsg(errmsg, _("Could not open file device %s. No Volume name given.\n"),
- print_name());
- clear_opened();
- return;
- }
-
- if (!IsPathSeparator(archive_name.c_str()[strlen(archive_name.c_str())-1])) {
- pm_strcat(archive_name, "/");
- }
- pm_strcat(archive_name, VolCatInfo.VolCatName);
- }
-
- mount(1); /* do mount if required */
-
- openmode = omode;
- set_mode(omode);
- /* If creating file, give 0640 permissions */
- Dmsg3(100, "open disk: mode=%s open(%s, 0x%x, 0640)\n", mode_to_str(omode),
- archive_name.c_str(), mode);
- /* Use system open() */
- if ((m_fd = ::open(archive_name.c_str(), mode, 0640)) < 0) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("Could not open: %s, ERR=%s\n"), archive_name.c_str(),
- be.bstrerror());
- Dmsg1(100, "open failed: %s", errmsg);
-// Jmsg1(NULL, M_WARNING, 0, "%s", errmsg);
- } else {
- dev_errno = 0;
- file = 0;
- file_addr = 0;
- }
- Dmsg4(100, "open dev: disk fd=%d opened, part=%d/%d, part_size=%u\n",
- m_fd, part, num_dvd_parts, part_size);
-}
-
-/*
- * Open a DVD device. N.B. at this point, dcr->VolCatInfo.VolCatName
- * (NB:??? I think it's VolCatInfo.VolCatName that is right)
- * has the desired Volume name, but there is NO assurance that
- * any other field of VolCatInfo is correct.
- */
-void DEVICE::open_dvd_device(DCR *dcr, int omode)
-{
- POOL_MEM archive_name(PM_FNAME);
- struct stat filestat;
-
- /*
- * Handle opening of DVD Volume
- */
- Dmsg2(100, "Enter: open_dvd_dev: DVD vol=%s mode=%s\n",
- &dcr->VolCatInfo, mode_to_str(omode));
-
- /*
- * For a DVD we must always pull the state info from dcr->VolCatInfo
- * This is a bit ugly, but is necessary because we need to open/close/re-open
- * the dvd file in order to properly mount/unmount and access the
- * DVD. So we store the state of the DVD as far as is known in the
- * catalog in dcr->VolCatInfo, and thus we refresh the dev->VolCatInfo
- * copy here, when opening.
- */
- VolCatInfo = dcr->VolCatInfo; /* structure assignment */
- Dmsg1(100, "Volume=%s\n", VolCatInfo.VolCatName);
-
- if (VolCatInfo.VolCatName[0] == 0) {
- Dmsg1(10, "Could not open DVD device %s. No Volume name given.\n",
- print_name());
- Mmsg(errmsg, _("Could not open DVD device %s. No Volume name given.\n"),
- print_name());
- clear_opened();
- return;
- }
-
- if (part == 0) {
- Dmsg0(100, "Set part=1\n");
- part = 1; /* count from 1 */
- file_size = 0;
- }
- part_size = 0;
- if (num_dvd_parts != VolCatInfo.VolCatParts) {
- num_dvd_parts = VolCatInfo.VolCatParts;
- }
-
- /*
- * If we are not trying to access the last part, set mode to
- * OPEN_READ_ONLY as writing would be an error.
- */
- Dmsg2(100, "open DVD part=%d num_dvd_parts=%d\n", part, num_dvd_parts);
- /* Now find the name of the part that we want to access */
- if (part <= num_dvd_parts) {
- omode = OPEN_READ_ONLY;
- make_mounted_dvd_filename(this, archive_name);
- set_part_spooled(false);
- } else {
- omode = OPEN_READ_WRITE;
- make_spooled_dvd_filename(this, archive_name);
- set_part_spooled(true);
- }
- set_mode(omode);
-
- // Clear any previous blank_dvd status - we will recalculate it here
- blank_dvd = false;
-
- Dmsg3(99, "open_dvd_device: part=%d num_dvd_parts=%d, VolCatInfo.VolCatParts=%d\n",
- part, num_dvd_parts, dcr->VolCatInfo.VolCatParts);
-
- if (mount(1)) {
- Dmsg0(99, "DVD device mounted.\n");
- if (num_dvd_parts == 0 && !truncating) {
- /*
- * If we can mount the device, and we are not truncating the DVD,
- * we usually want to abort. There is one exception, if there is
- * only one 0-sized file on the DVD, with the right volume name,
- * we continue (it's the method used by truncate_dvd to truncate a volume).
- */
- if (!check_can_write_on_non_blank_dvd(dcr)) {
- Mmsg(errmsg, _("The DVD in device %s contains data, please blank it before writing.\n"), print_name());
- Emsg0(M_FATAL, 0, errmsg);
- unmount(1); /* Unmount the device, so the operator can change it. */
- clear_opened();
- return;
- }
- blank_dvd = true;
- } else {
- /*
- * Ensure that we have the correct DVD loaded by looking for part1.
- * We only succeed the open if it exists. Failure to do this could
- * leave us trying to add a part to a different DVD!
- */
- uint32_t oldpart = part;
- struct stat statp;
- POOL_MEM part1_name(PM_FNAME);
- part = 1;
- make_mounted_dvd_filename(this, part1_name);
- part = oldpart;
- if (stat(part1_name.c_str(), &statp) < 0) {
- berrno be;
- Mmsg(errmsg, _("Unable to stat DVD part 1 file %s: ERR=%s\n"),
- part1_name.c_str(), be.bstrerror());
- Emsg0(M_FATAL, 0, errmsg);
- clear_opened();
- return;
- }
- if (!S_ISREG(statp.st_mode)) {
- /* It is not a regular file */
- Mmsg(errmsg, _("DVD part 1 is not a regular file %s.\n"),
- part1_name.c_str());
- Emsg0(M_FATAL, 0, errmsg);
- clear_opened();
- return;
- }
- }
- } else {
- Dmsg0(99, "DVD device mount failed.\n");
- /* We cannot mount the device */
- if (num_dvd_parts == 0) {
- /* Run free space, check there is a media. */
- if (!update_freespace()) {
- Emsg0(M_FATAL, 0, errmsg);
- clear_opened();
- return;
- }
- if (have_media()) {
- Dmsg1(100, "Could not mount device %s, this is not a problem (num_dvd_parts == 0), and have media.\n", print_name());
- } else {
- Mmsg(errmsg, _("There is no valid DVD in device %s.\n"), print_name());
- Emsg0(M_FATAL, 0, errmsg);
- clear_opened();
- return;
- }
- } else {
- Mmsg(errmsg, _("Could not mount DVD device %s.\n"), print_name());
- Emsg0(M_FATAL, 0, errmsg);
- clear_opened();
- return;
- }
- }
-
- Dmsg5(100, "open dev: DVD dev=%s mode=%s part=%d npart=%d volcatnparts=%d\n",
- archive_name.c_str(), mode_to_str(omode),
- part, num_dvd_parts, dcr->VolCatInfo.VolCatParts);
- openmode = omode;
- Dmsg2(100, "openmode=%d %s\n", openmode, mode_to_str(openmode));
-
-
- /* If creating file, give 0640 permissions */
- Dmsg3(100, "mode=%s open(%s, 0x%x, 0640)\n", mode_to_str(omode),
- archive_name.c_str(), mode);
- /* Use system open() */
- if ((m_fd = ::open(archive_name.c_str(), mode, 0640)) < 0) {
- berrno be;
- Mmsg2(errmsg, _("Could not open: %s, ERR=%s\n"), archive_name.c_str(),
- be.bstrerror());
- // Should this be set if we try the create/open below
- dev_errno = EIO; /* Interpreted as no device present by acquire.c:acquire_device_for_read(). */
- Dmsg1(100, "open failed: %s", errmsg);
-
- /* Previous open failed. See if we can recover */
- if ((omode == OPEN_READ_ONLY || omode == OPEN_READ_WRITE) &&
- (part > num_dvd_parts)) {
- /* If the last part (on spool), doesn't exist when accessing,
- * create it. In read/write mode a write will be allowed (higher
- * level software thinks that we are extending a pre-existing
- * media. Reads for READ_ONLY will report immediately an EOF
- * Sometimes it is better to finish with an EOF than with an error. */
- Dmsg1(100, "Creating last part on spool: %s\n", archive_name.c_str());
- omode = CREATE_READ_WRITE;
- set_mode(CREATE_READ_WRITE);
- m_fd = ::open(archive_name.c_str(), mode, 0640);
- set_mode(omode);
- }
- }
- Dmsg1(100, "after open fd=%d\n", m_fd);
- if (is_open()) {
- if (omode == OPEN_READ_WRITE || omode == CREATE_READ_WRITE) {
- set_append();
- }
- /* Get size of file */
- if (fstat(m_fd, &filestat) < 0) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("Could not fstat: %s, ERR=%s\n"), archive_name.c_str(),
- be.bstrerror());
- Dmsg1(100, "open failed: %s", errmsg);
- /* Use system close() */
- d_close(m_fd);
- clear_opened();
- } else {
- part_size = filestat.st_size;
- dev_errno = 0;
- update_pos(dcr); /* update position */
- }
- }
-}
-
-/*
- * Rewind the device.
- * Returns: true on success
- * false on failure
- */
-bool DEVICE::rewind(DCR *dcr)
+void DEVICE::open_device(DCR *dcr, int omode)
{
- struct mtop mt_com;
- unsigned int i;
- bool first = true;
-
- Dmsg3(400, "rewind res=%d fd=%d %s\n", num_reserved(), m_fd, print_name());
- state &= ~(ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
- block_num = file = 0;
- file_size = 0;
- file_addr = 0;
- if (m_fd < 0) {
- if (!is_dvd()) { /* In case of major error, the fd is not open on DVD, so we don't want to abort. */
- dev_errno = EBADF;
- Mmsg1(errmsg, _("Bad call to rewind. Device %s not open\n"),
- print_name());
- Emsg0(M_ABORT, 0, errmsg);
- }
- return false;
- }
- if (is_tape()) {
- mt_com.mt_op = MTREW;
- mt_com.mt_count = 1;
- /* If we get an I/O error on rewind, it is probably because
- * the drive is actually busy. We loop for (about 5 minutes)
- * retrying every 5 seconds.
- */
- for (i=max_rewind_wait; ; i -= 5) {
- if (d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com) < 0) {
- berrno be;
- clrerror(MTREW);
- if (i == max_rewind_wait) {
- Dmsg1(200, "Rewind error, %s. retrying ...\n", be.bstrerror());
- }
- /*
- * This is a gross hack, because if the user has the
- * device mounted (i.e. open), then uses mtx to load
- * a tape, the current open file descriptor is invalid.
- * So, we close the drive and re-open it.
- */
- if (first && dcr) {
- int open_mode = openmode;
- d_close(m_fd);
- clear_opened();
- open(dcr, open_mode);
- if (m_fd < 0) {
- return false;
- }
- first = false;
- continue;
- }
-#ifdef HAVE_SUN_OS
- if (dev_errno == EIO) {
- Mmsg1(errmsg, _("No tape loaded or drive offline on %s.\n"), print_name());
- return false;
- }
-#else
- if (dev_errno == EIO && i > 0) {
- Dmsg0(200, "Sleeping 5 seconds.\n");
- bmicrosleep(5, 0);
- continue;
- }
-#endif
- Mmsg2(errmsg, _("Rewind error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
- break;
- }
- } else if (is_file() || is_dvd()) {
- if (lseek(dcr, (boffset_t)0, SEEK_SET) < 0) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
- }
- return true;
+ /* do nothing waiting to split open_file/tape_device */
}
* Called to indicate that we have just read an
* EOF from the device.
*/
-void DEVICE::set_ateof()
-{
+void DEVICE::set_ateof()
+{
set_eof();
if (is_tape()) {
file++;
* Called to indicate we are now at the end of the tape, and
* writing is not possible.
*/
-void DEVICE::set_ateot()
+void DEVICE::set_ateot()
{
/* Make tape effectively read-only */
+ Dmsg0(200, "==== Set AtEof\n");
state |= (ST_EOF|ST_EOT|ST_WEOT);
clear_append();
}
-/*
- * Position device to end of medium (end of data)
- * Returns: true on succes
- * false on error
- */
-bool DEVICE::eod(DCR *dcr)
-{
- struct mtop mt_com;
- bool ok = true;
- boffset_t pos;
- int32_t os_file;
-
- if (m_fd < 0) {
- dev_errno = EBADF;
- Mmsg1(errmsg, _("Bad call to eod. Device %s not open\n"), print_name());
- return false;
- }
-
-#if defined (__digital__) && defined (__unix__)
- return fsf(VolCatInfo.VolCatFiles);
-#endif
-
- Dmsg0(100, "eod\n");
- if (at_eot()) {
- return true;
- }
- clear_eof(); /* remove EOF flag */
- block_num = file = 0;
- file_size = 0;
- file_addr = 0;
- if (is_fifo()) {
- return true;
- }
- if (!is_tape()) {
- pos = lseek(dcr, (boffset_t)0, SEEK_END);
-// Dmsg1(100, "====== Seek to %lld\n", pos);
- if (pos >= 0) {
- update_pos(dcr);
- set_eot();
- return true;
- }
- dev_errno = errno;
- berrno be;
- Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
-#ifdef MTEOM
- if (has_cap(CAP_FASTFSF) && !has_cap(CAP_EOM)) {
- Dmsg0(100,"Using FAST FSF for EOM\n");
- /* If unknown position, rewind */
- if (get_os_tape_file() < 0) {
- if (!rewind(NULL)) {
- return false;
- }
- }
- mt_com.mt_op = MTFSF;
- /*
- * ***FIXME*** fix code to handle case that INT16_MAX is
- * not large enough.
- */
- mt_com.mt_count = INT16_MAX; /* use big positive number */
- if (mt_com.mt_count < 0) {
- mt_com.mt_count = INT16_MAX; /* brain damaged system */
- }
- }
-
- if (has_cap(CAP_MTIOCGET) && (has_cap(CAP_FASTFSF) || has_cap(CAP_EOM))) {
- if (has_cap(CAP_EOM)) {
- Dmsg0(100,"Using EOM for EOM\n");
- mt_com.mt_op = MTEOM;
- mt_com.mt_count = 1;
- }
-
- if (d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com) < 0) {
- berrno be;
- clrerror(mt_com.mt_op);
- Dmsg1(50, "ioctl error: %s\n", be.bstrerror());
- update_pos(dcr);
- Mmsg2(errmsg, _("ioctl MTEOM error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
-
- os_file = get_os_tape_file();
- if (os_file < 0) {
- berrno be;
- clrerror(-1);
- Mmsg2(errmsg, _("ioctl MTIOCGET error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
- Dmsg1(100, "EOD file=%d\n", os_file);
- set_ateof();
- file = os_file;
- } else {
-#else
- {
-#endif
- /*
- * Rewind then use FSF until EOT reached
- */
- if (!rewind(NULL)) {
- return false;
- }
- /*
- * Move file by file to the end of the tape
- */
- int file_num;
- for (file_num=file; !at_eot(); file_num++) {
- Dmsg0(200, "eod: doing fsf 1\n");
- if (!fsf(1)) {
- Dmsg0(200, "fsf error.\n");
- return false;
- }
- /*
- * Avoid infinite loop by ensuring we advance.
- */
- if (!at_eot() && file_num == (int)file) {
- Dmsg1(100, "fsf did not advance from file %d\n", file_num);
- set_ateof();
- os_file = get_os_tape_file();
- if (os_file >= 0) {
- Dmsg2(100, "Adjust file from %d to %d\n", file_num, os_file);
- file = os_file;
- }
- break;
- }
- }
- }
- /*
- * Some drivers leave us after second EOF when doing
- * MTEOM, so we must backup so that appending overwrites
- * the second EOF.
- */
- if (has_cap(CAP_BSFATEOM)) {
- /* Backup over EOF */
- ok = bsf(1);
- /* If BSF worked and fileno is known (not -1), set file */
- os_file = get_os_tape_file();
- if (os_file >= 0) {
- Dmsg2(100, "BSFATEOF adjust file from %d to %d\n", file , os_file);
- file = os_file;
- } else {
- file++; /* wing it -- not correct on all OSes */
- }
- } else {
- update_pos(dcr); /* update position */
- }
- Dmsg1(200, "EOD dev->file=%d\n", file);
- return ok;
-}
/*
* Set the position of the device -- only for files and DVD
return false;
}
- /* Find out where we are */
- if (is_file() || is_dvd()) {
+ if (is_file()) {
file = 0;
file_addr = 0;
pos = lseek(dcr, (boffset_t)0, SEEK_CUR);
dev_errno = errno;
Pmsg1(000, _("Seek error: ERR=%s\n"), be.bstrerror());
Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
+ print_name(), be.bstrerror());
ok = false;
} else {
file_addr = pos;
return ok;
}
-/*
- * Return the status of the device. This was meant
- * to be a generic routine. Unfortunately, it doesn't
- * seem possible (at least I do not know how to do it
- * currently), which means that for the moment, this
- * routine has very little value.
- *
- * Returns: status
- */
-uint32_t status_dev(DEVICE *dev)
-{
- struct mtget mt_stat;
- uint32_t stat = 0;
-
- if (dev->state & (ST_EOT | ST_WEOT)) {
- stat |= BMT_EOD;
- Pmsg0(-20, " EOD");
- }
- if (dev->state & ST_EOF) {
- stat |= BMT_EOF;
- Pmsg0(-20, " EOF");
- }
- if (dev->is_tape()) {
- stat |= BMT_TAPE;
- Pmsg0(-20,_(" Bacula status:"));
- Pmsg2(-20,_(" file=%d block=%d\n"), dev->file, dev->block_num);
- if (dev->d_ioctl(dev->fd(), MTIOCGET, (char *)&mt_stat) < 0) {
- berrno be;
- dev->dev_errno = errno;
- Mmsg2(dev->errmsg, _("ioctl MTIOCGET error on %s. ERR=%s.\n"),
- dev->print_name(), be.bstrerror());
- return 0;
- }
- Pmsg0(-20, _(" Device status:"));
-
-#if defined(HAVE_LINUX_OS)
- if (GMT_EOF(mt_stat.mt_gstat)) {
- stat |= BMT_EOF;
- Pmsg0(-20, " EOF");
- }
- if (GMT_BOT(mt_stat.mt_gstat)) {
- stat |= BMT_BOT;
- Pmsg0(-20, " BOT");
- }
- if (GMT_EOT(mt_stat.mt_gstat)) {
- stat |= BMT_EOT;
- Pmsg0(-20, " EOT");
- }
- if (GMT_SM(mt_stat.mt_gstat)) {
- stat |= BMT_SM;
- Pmsg0(-20, " SM");
- }
- if (GMT_EOD(mt_stat.mt_gstat)) {
- stat |= BMT_EOD;
- Pmsg0(-20, " EOD");
- }
- if (GMT_WR_PROT(mt_stat.mt_gstat)) {
- stat |= BMT_WR_PROT;
- Pmsg0(-20, " WR_PROT");
- }
- if (GMT_ONLINE(mt_stat.mt_gstat)) {
- stat |= BMT_ONLINE;
- Pmsg0(-20, " ONLINE");
- }
- if (GMT_DR_OPEN(mt_stat.mt_gstat)) {
- stat |= BMT_DR_OPEN;
- Pmsg0(-20, " DR_OPEN");
- }
- if (GMT_IM_REP_EN(mt_stat.mt_gstat)) {
- stat |= BMT_IM_REP_EN;
- Pmsg0(-20, " IM_REP_EN");
- }
-#elif defined(HAVE_WIN32)
- if (GMT_EOF(mt_stat.mt_gstat)) {
- stat |= BMT_EOF;
- Pmsg0(-20, " EOF");
- }
- if (GMT_BOT(mt_stat.mt_gstat)) {
- stat |= BMT_BOT;
- Pmsg0(-20, " BOT");
- }
- if (GMT_EOT(mt_stat.mt_gstat)) {
- stat |= BMT_EOT;
- Pmsg0(-20, " EOT");
- }
- if (GMT_EOD(mt_stat.mt_gstat)) {
- stat |= BMT_EOD;
- Pmsg0(-20, " EOD");
- }
- if (GMT_WR_PROT(mt_stat.mt_gstat)) {
- stat |= BMT_WR_PROT;
- Pmsg0(-20, " WR_PROT");
- }
- if (GMT_ONLINE(mt_stat.mt_gstat)) {
- stat |= BMT_ONLINE;
- Pmsg0(-20, " ONLINE");
- }
- if (GMT_DR_OPEN(mt_stat.mt_gstat)) {
- stat |= BMT_DR_OPEN;
- Pmsg0(-20, " DR_OPEN");
- }
- if (GMT_IM_REP_EN(mt_stat.mt_gstat)) {
- stat |= BMT_IM_REP_EN;
- Pmsg0(-20, " IM_REP_EN");
- }
-
-#endif /* !SunOS && !OSF */
- if (dev->has_cap(CAP_MTIOCGET)) {
- Pmsg2(-20, _(" file=%d block=%d\n"), mt_stat.mt_fileno, mt_stat.mt_blkno);
- } else {
- Pmsg2(-20, _(" file=%d block=%d\n"), -1, -1);
- }
- } else {
- stat |= BMT_ONLINE | BMT_BOT;
- }
- return stat;
-}
-
-
-/*
- * Load medium in device
- * Returns: true on success
- * false on failure
- */
-bool load_dev(DEVICE *dev)
-{
-#ifdef MTLOAD
- struct mtop mt_com;
-#endif
-
- if (dev->fd() < 0) {
- dev->dev_errno = EBADF;
- Mmsg0(dev->errmsg, _("Bad call to load_dev. Device not open\n"));
- Emsg0(M_FATAL, 0, dev->errmsg);
- return false;
- }
- if (!(dev->is_tape())) {
- return true;
- }
-#ifndef MTLOAD
- Dmsg0(200, "stored: MTLOAD command not available\n");
- berrno be;
- dev->dev_errno = ENOTTY; /* function not available */
- Mmsg2(dev->errmsg, _("ioctl MTLOAD error on %s. ERR=%s.\n"),
- dev->print_name(), be.bstrerror());
- return false;
-#else
-
- dev->block_num = dev->file = 0;
- dev->file_size = 0;
- dev->file_addr = 0;
- mt_com.mt_op = MTLOAD;
- mt_com.mt_count = 1;
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- berrno be;
- dev->dev_errno = errno;
- Mmsg2(dev->errmsg, _("ioctl MTLOAD error on %s. ERR=%s.\n"),
- dev->print_name(), be.bstrerror());
- return false;
- }
- return true;
-#endif
-}
-
-/*
- * Rewind device and put it offline
- * Returns: true on success
- * false on failure
- */
-bool DEVICE::offline()
-{
- struct mtop mt_com;
-
- if (!is_tape()) {
- return true; /* device not open */
- }
-
- state &= ~(ST_APPEND|ST_READ|ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
- block_num = file = 0;
- file_size = 0;
- file_addr = 0;
- unlock_door();
- mt_com.mt_op = MTOFFL;
- mt_com.mt_count = 1;
- if (d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com) < 0) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("ioctl MTOFFL error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
- Dmsg1(100, "Offlined device %s\n", print_name());
- return true;
-}
-
-bool DEVICE::offline_or_rewind()
+void DEVICE::set_slot(int32_t slot)
{
- if (m_fd < 0) {
- return false;
- }
- if (has_cap(CAP_OFFLINEUNMOUNT)) {
- return offline();
- } else {
- /*
- * Note, this rewind probably should not be here (it wasn't
- * in prior versions of Bacula), but on FreeBSD, this is
- * needed in the case the tape was "frozen" due to an error
- * such as backspacing after writing and EOF. If it is not
- * done, all future references to the drive get and I/O error.
- */
- clrerror(MTREW);
- return rewind(NULL);
- }
+ m_slot = slot;
+ if (vol) vol->clear_slot();
}
-/*
- * Foward space a file
- * Returns: true on success
- * false on failure
- */
-bool DEVICE::fsf(int num)
+void DEVICE::clear_slot()
{
- int32_t os_file = 0;
- struct mtop mt_com;
- int stat = 0;
-
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to fsf. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
-
- if (!is_tape()) {
- return true;
- }
-
- if (at_eot()) {
- dev_errno = 0;
- Mmsg1(errmsg, _("Device %s at End of Tape.\n"), print_name());
- return false;
- }
- if (at_eof()) {
- Dmsg0(200, "ST_EOF set on entry to FSF\n");
- }
-
- Dmsg0(100, "fsf\n");
- block_num = 0;
- /*
- * If Fast forward space file is set, then we
- * use MTFSF to forward space and MTIOCGET
- * to get the file position. We assume that
- * the SCSI driver will ensure that we do not
- * forward space past the end of the medium.
- */
- if (has_cap(CAP_FSF) && has_cap(CAP_MTIOCGET) && has_cap(CAP_FASTFSF)) {
- int my_errno = 0;
- mt_com.mt_op = MTFSF;
- mt_com.mt_count = num;
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat < 0) {
- my_errno = errno; /* save errno */
- } else if ((os_file=get_os_tape_file()) < 0) {
- my_errno = errno; /* save errno */
- }
- if (my_errno != 0) {
- berrno be;
- set_eot();
- Dmsg0(200, "Set ST_EOT\n");
- clrerror(MTFSF);
- Mmsg2(errmsg, _("ioctl MTFSF error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror(my_errno));
- Dmsg1(200, "%s", errmsg);
- return false;
- }
-
- Dmsg1(200, "fsf file=%d\n", os_file);
- set_ateof();
- file = os_file;
- return true;
-
- /*
- * Here if CAP_FSF is set, and virtually all drives
- * these days support it, we read a record, then forward
- * space one file. Using this procedure, which is slow,
- * is the only way we can be sure that we don't read
- * two consecutive EOF marks, which means End of Data.
- */
- } else if (has_cap(CAP_FSF)) {
- POOLMEM *rbuf;
- int rbuf_len;
- Dmsg0(200, "FSF has cap_fsf\n");
- if (max_block_size == 0) {
- rbuf_len = DEFAULT_BLOCK_SIZE;
- } else {
- rbuf_len = max_block_size;
- }
- rbuf = get_memory(rbuf_len);
- mt_com.mt_op = MTFSF;
- mt_com.mt_count = 1;
- while (num-- && !at_eot()) {
- Dmsg0(100, "Doing read before fsf\n");
- if ((stat = this->read((char *)rbuf, rbuf_len)) < 0) {
- if (errno == ENOMEM) { /* tape record exceeds buf len */
- stat = rbuf_len; /* This is OK */
- /*
- * On IBM drives, they return ENOSPC at EOM
- * instead of EOF status
- */
- } else if (at_eof() && errno == ENOSPC) {
- stat = 0;
- } else {
- berrno be;
- set_eot();
- clrerror(-1);
- Dmsg2(100, "Set ST_EOT read errno=%d. ERR=%s\n", dev_errno,
- be.bstrerror());
- Mmsg2(errmsg, _("read error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- Dmsg1(100, "%s", errmsg);
- break;
- }
- }
- if (stat == 0) { /* EOF */
- Dmsg1(100, "End of File mark from read. File=%d\n", file+1);
- /* Two reads of zero means end of tape */
- if (at_eof()) {
- set_eot();
- Dmsg0(100, "Set ST_EOT\n");
- break;
- } else {
- set_ateof();
- continue;
- }
- } else { /* Got data */
- clear_eot();
- clear_eof();
- }
-
- Dmsg0(100, "Doing MTFSF\n");
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat < 0) { /* error => EOT */
- berrno be;
- set_eot();
- Dmsg0(100, "Set ST_EOT\n");
- clrerror(MTFSF);
- Mmsg2(errmsg, _("ioctl MTFSF error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- Dmsg0(100, "Got < 0 for MTFSF\n");
- Dmsg1(100, "%s", errmsg);
- } else {
- set_ateof();
- }
- }
- free_memory(rbuf);
-
- /*
- * No FSF, so use FSR to simulate it
- */
- } else {
- Dmsg0(200, "Doing FSR for FSF\n");
- while (num-- && !at_eot()) {
- fsr(INT32_MAX); /* returns -1 on EOF or EOT */
- }
- if (at_eot()) {
- dev_errno = 0;
- Mmsg1(errmsg, _("Device %s at End of Tape.\n"), print_name());
- stat = -1;
- } else {
- stat = 0;
- }
- }
- Dmsg1(200, "Return %d from FSF\n", stat);
- if (at_eof()) {
- Dmsg0(200, "ST_EOF set on exit FSF\n");
- }
- if (at_eot()) {
- Dmsg0(200, "ST_EOT set on exit FSF\n");
- }
- Dmsg1(200, "Return from FSF file=%d\n", file);
- return stat == 0;
+ m_slot = -1;
+ if (vol) vol->set_slot(-1);
}
-/*
- * Backward space a file
- * Returns: false on failure
- * true on success
- */
-bool DEVICE::bsf(int num)
+const char *DEVICE::print_type() const
{
- struct mtop mt_com;
- int stat;
-
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to bsf. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
-
- if (!is_tape()) {
- Mmsg1(errmsg, _("Device %s cannot BSF because it is not a tape.\n"),
- print_name());
- return false;
- }
-
- Dmsg0(100, "bsf\n");
- clear_eot();
- clear_eof();
- file -= num;
- file_addr = 0;
- file_size = 0;
- mt_com.mt_op = MTBSF;
- mt_com.mt_count = num;
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat < 0) {
- berrno be;
- clrerror(MTBSF);
- Mmsg2(errmsg, _("ioctl MTBSF error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- }
- return stat == 0;
+ return prt_dev_types[device->dev_type];
}
-
/*
- * Foward space num records
- * Returns: false on failure
- * true on success
+ * Set to unload the current volume in the drive
*/
-bool DEVICE::fsr(int num)
+void DEVICE::set_unload()
{
- struct mtop mt_com;
- int stat;
-
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to fsr. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
-
- if (!is_tape()) {
- return false;
- }
-
- if (!has_cap(CAP_FSR)) {
- Mmsg1(errmsg, _("ioctl MTFSR not permitted on %s.\n"), print_name());
- return false;
- }
-
- Dmsg1(100, "fsr %d\n", num);
- mt_com.mt_op = MTFSR;
- mt_com.mt_count = num;
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat == 0) {
- clear_eof();
- block_num += num;
- } else {
- berrno be;
- struct mtget mt_stat;
- clrerror(MTFSR);
- Dmsg1(100, "FSF fail: ERR=%s\n", be.bstrerror());
- if (dev_get_os_pos(this, &mt_stat)) {
- Dmsg4(100, "Adjust from %d:%d to %d:%d\n", file,
- block_num, mt_stat.mt_fileno, mt_stat.mt_blkno);
- file = mt_stat.mt_fileno;
- block_num = mt_stat.mt_blkno;
- } else {
- if (at_eof()) {
- set_eot();
- } else {
- set_ateof();
- }
- }
- Mmsg3(errmsg, _("ioctl MTFSR %d error on %s. ERR=%s.\n"),
- num, print_name(), be.bstrerror());
+ if (!m_unload && VolHdr.VolumeName[0] != 0) {
+ m_unload = true;
+ memcpy(UnloadVolName, VolHdr.VolumeName, sizeof(UnloadVolName));
+ notify_newvol_in_attached_dcrs(NULL);
}
- return stat == 0;
}
/*
- * Backward space a record
- * Returns: false on failure
- * true on success
+ * Clear volume header
*/
-bool DEVICE::bsr(int num)
+void DEVICE::clear_volhdr()
{
- struct mtop mt_com;
- int stat;
-
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to bsr_dev. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
-
- if (!is_tape()) {
- return false;
- }
-
- if (!has_cap(CAP_BSR)) {
- Mmsg1(errmsg, _("ioctl MTBSR not permitted on %s.\n"), print_name());
- return false;
- }
+ Dmsg1(100, "Clear volhdr vol=%s\n", VolHdr.VolumeName);
+ memset(&VolHdr, 0, sizeof(VolHdr));
+ setVolCatInfo(false);
+}
- Dmsg0(100, "bsr_dev\n");
- block_num -= num;
- clear_eof();
- clear_eot();
- mt_com.mt_op = MTBSR;
- mt_com.mt_count = num;
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat < 0) {
- berrno be;
- clrerror(MTBSR);
- Mmsg2(errmsg, _("ioctl MTBSR error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- }
- return stat == 0;
+void DEVICE::set_nospace()
+{
+ state |= ST_NOSPACE;
}
-void DEVICE::lock_door()
+void DEVICE::clear_nospace()
{
-#ifdef MTLOCK
- struct mtop mt_com;
- mt_com.mt_op = MTLOCK;
- mt_com.mt_count = 1;
- d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
-#endif
+ state &= ~ST_NOSPACE;
}
-void DEVICE::unlock_door()
+/* Put device in append mode */
+void DEVICE::set_append()
{
-#ifdef MTUNLOCK
- struct mtop mt_com;
- mt_com.mt_op = MTUNLOCK;
- mt_com.mt_count = 1;
- d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
-#endif
+ state &= ~(ST_NOSPACE|ST_READ|ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
+ state |= ST_APPEND;
}
-void DEVICE::set_slot(int32_t slot)
-{
- m_slot = slot;
- if (vol) vol->clear_slot();
+/* Clear append mode */
+void DEVICE::clear_append()
+{
+ state &= ~ST_APPEND;
}
-void DEVICE::clear_slot()
-{
- m_slot = -1;
- if (vol) vol->set_slot(-1);
+/* Put device in read mode */
+void DEVICE::set_read()
+{
+ state &= ~(ST_APPEND|ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
+ state |= ST_READ;
}
-
+/* Clear read mode */
+void DEVICE::clear_read()
+{
+ state &= ~ST_READ;
+}
/*
- * Reposition the device to file, block
- * Returns: false on failure
- * true on success
+ * Get freespace using OS calls
+ * TODO: See if it's working with mount commands
*/
-bool DEVICE::reposition(DCR *dcr, uint32_t rfile, uint32_t rblock)
+bool DEVICE::get_os_device_freespace()
{
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to reposition. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
+ int64_t freespace, totalspace;
- if (!is_tape()) {
- boffset_t pos = (((boffset_t)rfile)<<32) | rblock;
- Dmsg1(100, "===== lseek to %d\n", (int)pos);
- if (lseek(dcr, pos, SEEK_SET) == (boffset_t)-1) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- return false;
- }
- file = rfile;
- block_num = rblock;
- file_addr = pos;
+ if (!is_file()) {
return true;
}
+ if (fs_get_free_space(dev_name, &freespace, &totalspace) == 0) {
+ set_freespace(freespace, totalspace, 0, true);
+ Mmsg(errmsg, "");
+ return true;
- /* After this point, we are tape only */
- Dmsg4(100, "reposition from %u:%u to %u:%u\n", file, block_num, rfile, rblock);
- if (rfile < file) {
- Dmsg0(100, "Rewind\n");
- if (!rewind(NULL)) {
- return false;
- }
- }
- if (rfile > file) {
- Dmsg1(100, "fsf %d\n", rfile-file);
- if (!fsf(rfile-file)) {
- Dmsg1(100, "fsf failed! ERR=%s\n", bstrerror());
- return false;
- }
- Dmsg2(100, "wanted_file=%d at_file=%d\n", rfile, file);
- }
- if (rblock < block_num) {
- Dmsg2(100, "wanted_blk=%d at_blk=%d\n", rblock, block_num);
- Dmsg0(100, "bsf 1\n");
- bsf(1);
- Dmsg0(100, "fsf 1\n");
- fsf(1);
- Dmsg2(100, "wanted_blk=%d at_blk=%d\n", rblock, block_num);
- }
- if (has_cap(CAP_POSITIONBLOCKS) && rblock > block_num) {
- /* Ignore errors as Bacula can read to the correct block */
- Dmsg1(100, "fsr %d\n", rblock-block_num);
- return fsr(rblock-block_num);
} else {
- while (rblock > block_num) {
- if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
- berrno be;
- dev_errno = errno;
- Dmsg2(30, "Failed to find requested block on %s: ERR=%s",
- print_name(), be.bstrerror());
- return false;
- }
- Dmsg2(300, "moving forward wanted_blk=%d at_blk=%d\n", rblock, block_num);
- }
+ set_freespace(0, 0, 0, false); /* No valid freespace */
}
- return true;
+ return false;
}
+/* Update the free space on the device */
+bool DEVICE::update_freespace()
+{
+ POOL_MEM ocmd(PM_FNAME);
+ POOLMEM* results;
+ char* icmd;
+ char* p;
+ uint64_t free, total;
+ char ed1[50];
+ bool ok = false;
+ int status;
+ berrno be;
+ if (!is_file()) {
+ Mmsg(errmsg, "");
+ return true;
+ }
-/*
- * Write an end of file on the device
- * Returns: true on success
- * false on failure
- */
-bool DEVICE::weof(int num)
-{
- struct mtop mt_com;
- int stat;
- Dmsg1(129, "=== weof_dev=%s\n", print_name());
-
- if (!is_open()) {
- dev_errno = EBADF;
- Mmsg0(errmsg, _("Bad call to weof_dev. Device not open\n"));
- Emsg0(M_FATAL, 0, errmsg);
- return false;
+ /* The device must be mounted in order for freespace to work */
+ if (requires_mount()) {
+ mount(1);
}
- file_size = 0;
- if (!is_tape()) {
+ if (get_os_device_freespace()) {
+ Dmsg4(20, "get_os_device_freespace: free_space=%s freespace_ok=%d free_space_errno=%d have_media=%d\n",
+ edit_uint64(free_space, ed1), !!is_freespace_ok(), free_space_errno, !!have_media());
return true;
}
- if (!can_append()) {
- Mmsg0(errmsg, _("Attempt to WEOF on non-appendable Volume\n"));
- Emsg0(M_FATAL, 0, errmsg);
+
+ icmd = device->free_space_command;
+
+ if (!icmd) {
+ set_freespace(0, 0, 0, false);
+ Dmsg2(20, "ERROR: update_free_space_dev: free_space=%s, free_space_errno=%d (!icmd)\n",
+ edit_uint64(free_space, ed1), free_space_errno);
+ Mmsg(errmsg, _("No FreeSpace command defined.\n"));
return false;
}
-
- clear_eof();
- clear_eot();
- mt_com.mt_op = MTWEOF;
- mt_com.mt_count = num;
- stat = d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- if (stat == 0) {
- block_num = 0;
- file += num;
- file_addr = 0;
- } else {
- berrno be;
- clrerror(MTWEOF);
- if (stat == -1) {
- Mmsg2(errmsg, _("ioctl MTWEOF error on %s. ERR=%s.\n"),
- print_name(), be.bstrerror());
- }
- }
- return stat == 0;
-}
+ edit_mount_codes(ocmd, icmd);
-/*
- * If implemented in system, clear the tape
- * error status.
- */
-void DEVICE::clrerror(int func)
-{
- const char *msg = NULL;
- char buf[100];
+ Dmsg1(20, "update_freespace: cmd=%s\n", ocmd.c_str());
- dev_errno = errno; /* save errno */
- if (errno == EIO) {
- VolCatInfo.VolCatErrors++;
- }
+ results = get_pool_memory(PM_MESSAGE);
- if (!is_tape()) {
- return;
- }
+ Dmsg1(20, "Run freespace prog=%s\n", ocmd.c_str());
+ status = run_program_full_output(ocmd.c_str(), max_open_wait/2, results);
+ Dmsg2(20, "Freespace status=%d result=%s\n", status, results);
+ /* Should report "1223232 12323232\n" "free total\n" */
+ if (status == 0) {
+ free = str_to_int64(results) * 1024;
+ p = results;
- if (errno == ENOTTY || errno == ENOSYS) { /* Function not implemented */
- switch (func) {
- case -1:
- break; /* ignore message printed later */
- case MTWEOF:
- msg = "WTWEOF";
- clear_cap(CAP_EOF); /* turn off feature */
- break;
-#ifdef MTEOM
- case MTEOM:
- msg = "WTEOM";
- clear_cap(CAP_EOM); /* turn off feature */
- break;
-#endif
- case MTFSF:
- msg = "MTFSF";
- clear_cap(CAP_FSF); /* turn off feature */
- break;
- case MTBSF:
- msg = "MTBSF";
- clear_cap(CAP_BSF); /* turn off feature */
- break;
- case MTFSR:
- msg = "MTFSR";
- clear_cap(CAP_FSR); /* turn off feature */
- break;
- case MTBSR:
- msg = "MTBSR";
- clear_cap(CAP_BSR); /* turn off feature */
- break;
- case MTREW:
- msg = "MTREW";
- break;
-#ifdef MTSETBLK
- case MTSETBLK:
- msg = "MTSETBLK";
- break;
-#endif
-#ifdef MTSETDRVBUFFER
- case MTSETDRVBUFFER:
- msg = "MTSETDRVBUFFER";
- break;
-#endif
-#ifdef MTRESET
- case MTRESET:
- msg = "MTRESET";
- break;
-#endif
+ if (skip_nonspaces(&p)) {
+ total = str_to_int64(p) * 1024;
-#ifdef MTSETBSIZ
- case MTSETBSIZ:
- msg = "MTSETBSIZ";
- break;
-#endif
-#ifdef MTSRSZ
- case MTSRSZ:
- msg = "MTSRSZ";
- break;
-#endif
-#ifdef MTLOAD
- case MTLOAD:
- msg = "MTLOAD";
- break;
-#endif
-#ifdef MTUNLOCK
- case MTUNLOCK:
- msg = "MTUNLOCK";
- break;
-#endif
- case MTOFFL:
- msg = "MTOFFL";
- break;
- default:
- bsnprintf(buf, sizeof(buf), _("unknown func code %d"), func);
- msg = buf;
- break;
- }
- if (msg != NULL) {
- dev_errno = ENOSYS;
- Mmsg1(errmsg, _("I/O function \"%s\" not supported on this device.\n"), msg);
- Emsg0(M_ERROR, 0, errmsg);
+ } else {
+ total = 0;
}
- }
-
- /*
- * Now we try different methods of clearing the error
- * status on the drive so that it is not locked for
- * further operations.
- */
- /* On some systems such as NetBSD, this clears all errors */
- get_os_tape_file();
+ Dmsg1(400, "Free space program run: Freespace=%s\n", results);
+ if (free >= 0) {
+ set_freespace(free, total, 0, true); /* have valid freespace */
+ Mmsg(errmsg, "");
+ ok = true;
+ }
+ } else {
+ set_freespace(0, 0, EPIPE, false); /* no valid freespace */
+ Mmsg2(errmsg, _("Cannot run free space command. Results=%s ERR=%s\n"),
+ results, be.bstrerror(status));
-/* Found on Solaris */
-#ifdef MTIOCLRERR
-{
- d_ioctl(m_fd, MTIOCLRERR);
- Dmsg0(200, "Did MTIOCLRERR\n");
+ dev_errno = free_space_errno;
+ Dmsg4(20, "Cannot get free space on device %s. free_space=%s, "
+ "free_space_errno=%d ERR=%s\n",
+ print_name(), edit_uint64(free_space, ed1),
+ free_space_errno, errmsg);
+ }
+ free_pool_memory(results);
+ Dmsg4(20, "leave update_freespace: free_space=%s freespace_ok=%d free_space_errno=%d have_media=%d\n",
+ edit_uint64(free_space, ed1), !!is_freespace_ok(), free_space_errno, !!have_media());
+ return ok;
}
-#endif
-/* Typically on FreeBSD */
-#ifdef MTIOCERRSTAT
+void DEVICE::updateVolCatBytes(uint64_t bytes)
{
- berrno be;
- /* Read and clear SCSI error status */
- union mterrstat mt_errstat;
- Dmsg2(200, "Doing MTIOCERRSTAT errno=%d ERR=%s\n", dev_errno,
- be.bstrerror(dev_errno));
- d_ioctl(m_fd, MTIOCERRSTAT, (char *)&mt_errstat);
+ DEVICE *dev = this;
+ Lock_VolCatInfo();
+ dev->VolCatInfo.VolCatAmetaBytes += bytes;
+ Dmsg1(200, "updateVolBytes ameta=%lld\n",
+ dev->VolCatInfo.VolCatAmetaBytes);
+ dev->VolCatInfo.VolCatBytes += bytes;
+ setVolCatInfo(false);
+ Unlock_VolCatInfo();
}
-#endif
-/* Clear Subsystem Exception OSF1 */
-#ifdef MTCSE
+void DEVICE::updateVolCatBlocks(uint32_t blocks)
{
- struct mtop mt_com;
- mt_com.mt_op = MTCSE;
- mt_com.mt_count = 1;
- /* Clear any error condition on the tape */
- d_ioctl(m_fd, MTIOCTOP, (char *)&mt_com);
- Dmsg0(200, "Did MTCSE\n");
-}
-#endif
+ DEVICE *dev = this;
+ Lock_VolCatInfo();
+ dev->VolCatInfo.VolCatAmetaBlocks += blocks;
+ dev->VolCatInfo.VolCatBlocks += blocks;
+ setVolCatInfo(false);
+ Unlock_VolCatInfo();
}
-/*
- * Set to unload the current volume in the drive
- */
-void DEVICE::set_unload()
+void DEVICE::updateVolCatWrites(uint32_t writes)
{
- if (!m_unload && VolHdr.VolumeName[0] != 0) {
- m_unload = true;
- memcpy(UnloadVolName, VolHdr.VolumeName, sizeof(UnloadVolName));
- }
+ DEVICE *dev = this;
+ Lock_VolCatInfo();
+ dev->VolCatInfo.VolCatAmetaWrites += writes;
+ dev->VolCatInfo.VolCatWrites += writes;
+ setVolCatInfo(false);
+ Unlock_VolCatInfo();
}
-
-/*
- * Clear volume header
- */
-void DEVICE::clear_volhdr()
+void DEVICE::updateVolCatReads(uint32_t reads)
{
- Dmsg1(100, "Clear volhdr vol=%s\n", VolHdr.VolumeName);
- memset(&VolHdr, 0, sizeof(VolHdr));
+ DEVICE *dev = this;
+ Lock_VolCatInfo();
+ dev->VolCatInfo.VolCatAmetaReads += reads;
+ dev->VolCatInfo.VolCatReads += reads;
+ setVolCatInfo(false);
+ Unlock_VolCatInfo();
}
+void DEVICE::updateVolCatReadBytes(uint64_t bytes)
+{
+ DEVICE *dev = this;
+ Lock_VolCatInfo();
+ dev->VolCatInfo.VolCatAmetaRBytes += bytes;
+ dev->VolCatInfo.VolCatRBytes += bytes;
+ setVolCatInfo(false);
+ Unlock_VolCatInfo();
+}
/*
* Close the device
*/
-void DEVICE::close()
+bool DEVICE::close()
{
- Dmsg1(100, "close_dev %s\n", print_name());
- if (has_cap(CAP_OFFLINEUNMOUNT)) {
- offline();
- }
+ bool ok = true;
+
+ Dmsg4(40, "close_dev vol=%s fd=%d dev=%p dev=%s\n",
+ VolHdr.VolumeName, m_fd, this, print_name());
+ offline_or_rewind();
if (!is_open()) {
- Dmsg2(100, "device %s already closed vol=%s\n", print_name(),
+ Dmsg2(200, "device %s already closed vol=%s\n", print_name(),
VolHdr.VolumeName);
- return; /* already closed */
+ return true; /* already closed */
}
switch (dev_type) {
case B_VTL_DEV:
case B_VTAPE_DEV:
case B_TAPE_DEV:
- unlock_door();
- d_close(m_fd);
- break;
- case B_FILE_DEV:
- case B_DVD_DEV:
- d_close(m_fd);
- unmount(1); /* do unmount if required */
- break;
+ unlock_door();
+ /* Fall through wanted */
default:
- d_close(m_fd);
+ if (d_close(m_fd) != 0) {
+ berrno be;
+ dev_errno = errno;
+ Mmsg2(errmsg, _("Error closing device %s. ERR=%s.\n"),
+ print_name(), be.bstrerror());
+ ok = false;
+ }
break;
}
+ unmount(1); /* do unmount if required */
+
/* Clean up device packet so it can be reused */
clear_opened();
+
/*
* Be careful not to clear items needed by the DVD driver
* when it is closing a single part.
*/
state &= ~(ST_LABEL|ST_READ|ST_APPEND|ST_EOT|ST_WEOT|ST_EOF|
- ST_MOUNTED|ST_MEDIA|ST_SHORT);
+ ST_NOSPACE|ST_MOUNTED|ST_MEDIA|ST_SHORT);
label_type = B_BACULA_LABEL;
file = block_num = 0;
file_size = 0;
stop_thread_timer(tid);
tid = 0;
}
+ return ok;
}
/*
* difference between close_part() and close() is that close_part()
* saves the state information of the device (e.g. the Volume lable,
* the Volume Catalog record, ... This permits opening and closing
- * the Volume parts multiple times without losing track of what the
+ * the Volume parts multiple times without losing track of what the
* main Volume parameters are.
*/
void DEVICE::close_part(DCR * /*dcr*/)
VolCatInfo = saveVolCatInfo; /* structure assignment */
}
-boffset_t DEVICE::lseek(DCR *dcr, boffset_t offset, int whence)
-{
- switch (dev_type) {
- case B_DVD_DEV:
- return lseek_dvd(dcr, offset, whence);
- case B_FILE_DEV:
-#if defined(HAVE_WIN32)
- return ::_lseeki64(m_fd, (__int64)offset, whence);
-#else
- return ::lseek(m_fd, offset, whence);
-#endif
- }
- return -1;
-}
-
-
-bool DEVICE::truncate(DCR *dcr) /* We need the DCR for DVD-writing */
-{
- struct stat st;
-
- Dmsg1(100, "truncate %s\n", print_name());
- switch (dev_type) {
- case B_VTL_DEV:
- case B_VTAPE_DEV:
- case B_TAPE_DEV:
- /* maybe we should rewind and write and eof ???? */
- return true; /* we don't really truncate tapes */
- case B_DVD_DEV:
- return truncate_dvd(dcr);
- case B_FILE_DEV:
- if (ftruncate(m_fd, 0) != 0) {
- berrno be;
- Mmsg2(errmsg, _("Unable to truncate device %s. ERR=%s\n"),
- print_name(), be.bstrerror());
- return false;
- }
-
- /*
- * Check for a successful ftruncate() and issue a work-around for devices
- * (mostly cheap NAS) that don't support truncation.
- * Workaround supplied by Martin Schmid as a solution to bug #1011.
- * 1. close file
- * 2. delete file
- * 3. open new file with same mode
- * 4. change ownership to original
- */
-
- if (fstat(m_fd, &st) != 0) {
- berrno be;
- Mmsg2(errmsg, _("Unable to stat device %s. ERR=%s\n"),
- print_name(), be.bstrerror());
- return false;
- }
-
- if (st.st_size != 0) { /* ftruncate() didn't work */
- POOL_MEM archive_name(PM_FNAME);
-
- pm_strcpy(archive_name, dev_name);
- if (!IsPathSeparator(archive_name.c_str()[strlen(archive_name.c_str())-1])) {
- pm_strcat(archive_name, "/");
- }
- pm_strcat(archive_name, dcr->VolumeName);
-
- Mmsg2(errmsg, _("Device %s doesn't support ftruncate(). Recreating file %s.\n"),
- print_name(), archive_name.c_str());
-
- /* Close file and blow it away */
- ::close(m_fd);
- ::unlink(archive_name.c_str());
-
- /* Recreate the file -- of course, empty */
- set_mode(CREATE_READ_WRITE);
- if ((m_fd = ::open(archive_name.c_str(), mode, st.st_mode)) < 0) {
- berrno be;
- dev_errno = errno;
- Mmsg2(errmsg, _("Could not reopen: %s, ERR=%s\n"), archive_name.c_str(),
- be.bstrerror());
- Dmsg1(100, "reopen failed: %s", errmsg);
- Emsg0(M_FATAL, 0, errmsg);
- return false;
- }
-
- /* Reset proper owner */
- chown(archive_name.c_str(), st.st_uid, st.st_gid);
- }
-
- return true;
- }
- return false;
-}
-
-/* Mount the device.
+/*
* If timeout, wait until the mount command returns 0.
* If !timeout, try to mount the device only once.
*/
-bool DEVICE::mount(int timeout)
+bool DEVICE::mount(int timeout)
{
Dmsg0(190, "Enter mount\n");
- if (is_mounted()) {
- return true;
- } else if (requires_mount()) {
- return do_mount(1, timeout);
- }
+ if (!is_mounted() && device->mount_command) {
+ return mount_file(1, timeout);
+ }
return true;
}
-/* Unmount the device
+/*
+ * Unmount the device
* If timeout, wait until the unmount command returns 0.
* If !timeout, try to unmount the device only once.
*/
-bool DEVICE::unmount(int timeout)
+bool DEVICE::unmount(int timeout)
{
Dmsg0(100, "Enter unmount\n");
- if (requires_mount() && is_mounted()) {
- return do_mount(0, timeout);
- }
+ if (is_mounted() && requires_mount() && device->unmount_command) {
+ return mount_file(0, timeout);
+ }
return true;
}
-/* (Un)mount the device */
-bool DEVICE::do_mount(int mount, int dotimeout)
-{
- POOL_MEM ocmd(PM_FNAME);
- POOLMEM *results;
- char *icmd;
- int status, timeout;
-
- Dsm_check(1);
- if (mount) {
- if (is_mounted()) {
- Dmsg0(200, "======= mount=1\n");
- return true;
- }
- icmd = device->mount_command;
- } else {
- if (!is_mounted()) {
- Dmsg0(200, "======= mount=0\n");
- return true;
- }
- icmd = device->unmount_command;
- }
-
- clear_freespace_ok();
- edit_mount_codes(ocmd, icmd);
-
- Dmsg2(100, "do_mount: cmd=%s mounted=%d\n", ocmd.c_str(), !!is_mounted());
-
- if (dotimeout) {
- /* Try at most 10 times to (un)mount the device. This should perhaps be configurable. */
- timeout = 10;
- } else {
- timeout = 0;
- }
- results = get_memory(4000);
-
- /* If busy retry each second */
- Dmsg1(100, "do_mount run_prog=%s\n", ocmd.c_str());
- while ((status = run_program_full_output(ocmd.c_str(),
- max_open_wait/2, results)) != 0) {
- /* Doesn't work with internationalization (This is not a problem) */
- if (mount && fnmatch("*is already mounted on*", results, 0) == 0) {
- break;
- }
- if (!mount && fnmatch("* not mounted*", results, 0) == 0) {
- break;
- }
- if (timeout-- > 0) {
- /* Sometimes the device cannot be mounted because it is already mounted.
- * Try to unmount it, then remount it */
- if (mount) {
- Dmsg1(400, "Trying to unmount the device %s...\n", print_name());
- do_mount(0, 0);
- }
- bmicrosleep(1, 0);
- continue;
- }
- if (status != 0) {
- berrno be;
- Dmsg5(100, "Device %s cannot be %smounted. stat=%d result=%s ERR=%s\n", print_name(),
- (mount ? "" : "un"), status, results, be.bstrerror(status));
- Mmsg(errmsg, _("Device %s cannot be %smounted. ERR=%s\n"),
- print_name(), (mount ? "" : "un"), be.bstrerror(status));
- } else {
- Dmsg4(100, "Device %s cannot be %smounted. stat=%d ERR=%s\n", print_name(),
- (mount ? "" : "un"), status, results);
- Mmsg(errmsg, _("Device %s cannot be %smounted. ERR=%s\n"),
- print_name(), (mount ? "" : "un"), results);
- }
- /*
- * Now, just to be sure it is not mounted, try to read the
- * filesystem.
- */
- DIR* dp;
- struct dirent *entry, *result;
- int name_max;
- int count;
-
- name_max = pathconf(".", _PC_NAME_MAX);
- if (name_max < 1024) {
- name_max = 1024;
- }
-
- if (!(dp = opendir(device->mount_point))) {
- berrno be;
- dev_errno = errno;
- Dmsg3(100, "do_mount: failed to open dir %s (dev=%s), ERR=%s\n",
- device->mount_point, print_name(), be.bstrerror());
- goto get_out;
- }
-
- entry = (struct dirent *)malloc(sizeof(struct dirent) + name_max + 1000);
- count = 0;
- while (1) {
- if ((readdir_r(dp, entry, &result) != 0) || (result == NULL)) {
- dev_errno = EIO;
- Dmsg2(129, "do_mount: failed to find suitable file in dir %s (dev=%s)\n",
- device->mount_point, print_name());
- break;
- }
- if ((strcmp(result->d_name, ".")) && (strcmp(result->d_name, "..")) && (strcmp(result->d_name, ".keep"))) {
- count++; /* result->d_name != ., .. or .keep (Gentoo-specific) */
- break;
- } else {
- Dmsg2(129, "do_mount: ignoring %s in %s\n", result->d_name, device->mount_point);
- }
- }
- free(entry);
- closedir(dp);
-
- Dmsg1(100, "do_mount: got %d files in the mount point (not counting ., .. and .keep)\n", count);
-
- if (count > 0) {
- /* If we got more than ., .. and .keep */
- /* there must be something mounted */
- if (mount) {
- Dmsg1(100, "Did Mount by count=%d\n", count);
- break;
- } else {
- /* An unmount request. We failed to unmount - report an error */
- set_mounted(true);
- free_pool_memory(results);
- Dmsg0(200, "== error mount=1 wanted unmount\n");
- return false;
- }
- }
-get_out:
- set_mounted(false);
- free_pool_memory(results);
- Dmsg0(200, "============ mount=0\n");
- Dsm_check(1);
- return false;
- }
-
- set_mounted(mount); /* set/clear mounted flag */
- free_pool_memory(results);
- /* Do not check free space when unmounting */
- if (mount && !update_freespace()) {
- return false;
- }
- Dmsg1(200, "============ mount=%d\n", mount);
- return true;
-}
/*
* Edit codes into (Un)MountCommand, Write(First)PartCommand
const char *p;
const char *str;
char add[20];
-
+
POOL_MEM archive_name(PM_FNAME);
omsg.c_str()[0] = 0;
case 'm':
str = device->mount_point;
break;
- case 'v':
- make_spooled_dvd_filename(this, archive_name);
- str = archive_name.c_str();
- break;
default:
add[0] = '%';
add[1] = *p;
}
}
-/* return the last timer interval (ms)
+/* return the last timer interval (ms)
* or 0 if something goes wrong
*/
btime_t DEVICE::get_timer_count()
DevReadBytes += read_len;
}
- return read_len;
+ return read_len;
}
/* write to fd */
DevWriteBytes += write_len;
}
- return write_len;
+ return write_len;
}
/* Return the resource name for the device */
return device->hdr.name;
}
-/* Returns file position on tape or -1 */
-int32_t DEVICE::get_os_tape_file()
+uint32_t DEVICE::get_file()
{
- struct mtget mt_stat;
+ if (is_dvd() || is_tape()) {
+ return file;
+ } else {
+ uint64_t bytes = VolCatInfo.VolCatAdataBytes + VolCatInfo.VolCatAmetaBytes;
+ return (uint32_t)(bytes >> 32);
+ }
+}
- if (has_cap(CAP_MTIOCGET) &&
- d_ioctl(m_fd, MTIOCGET, (char *)&mt_stat) == 0) {
- return mt_stat.mt_fileno;
+uint32_t DEVICE::get_block_num()
+{
+ if (is_dvd() || is_tape()) {
+ return block_num;
+ } else {
+ return VolCatInfo.VolCatAdataBlocks + VolCatInfo.VolCatAmetaBlocks;
}
- return -1;
}
-char *
-dev_vol_name(DEVICE *dev)
+/*
+ * Walk through all attached jcrs indicating the volume has changed
+ * Note: If you have the new VolumeName, it is passed here,
+ * otherwise pass a NULL.
+ */
+void
+DEVICE::notify_newvol_in_attached_dcrs(const char *newVolumeName)
+{
+ Dmsg2(140, "Notify dcrs of vol change. oldVolume=%s NewVolume=%s\n",
+ getVolCatName(), newVolumeName?"*None*":newVolumeName);
+ Lock_dcrs();
+ DCR *mdcr;
+ foreach_dlist(mdcr, attached_dcrs) {
+ if (mdcr->jcr->JobId == 0) {
+ continue; /* ignore console */
+ }
+ mdcr->NewVol = true;
+ mdcr->NewFile = true;
+ if (newVolumeName && mdcr->VolumeName != newVolumeName) {
+ bstrncpy(mdcr->VolumeName, newVolumeName, sizeof(mdcr->VolumeName));
+ Dmsg2(140, "Set NewVol=%s in JobId=%d\n", mdcr->VolumeName, mdcr->jcr->JobId);
+ }
+ }
+ Unlock_dcrs();
+}
+
+/*
+ * Walk through all attached jcrs indicating the File has changed
+ */
+void
+DEVICE::notify_newfile_in_attached_dcrs()
{
- return dev->VolCatInfo.VolCatName;
+ Dmsg1(140, "Notify dcrs of file change. Volume=%s\n", getVolCatName());
+ Lock_dcrs();
+ DCR *mdcr;
+ foreach_dlist(mdcr, attached_dcrs) {
+ if (mdcr->jcr->JobId == 0) {
+ continue; /* ignore console */
+ }
+ Dmsg1(140, "Notify JobI=%d\n", mdcr->jcr->JobId);
+ mdcr->NewFile = true;
+ }
+ Unlock_dcrs();
}
+
/*
* Free memory allocated for the device
*/
void DEVICE::term(void)
{
+ DEVICE *dev = NULL;
Dmsg1(900, "term dev: %s\n", print_name());
close();
if (dev_name) {
pthread_cond_destroy(&wait);
pthread_cond_destroy(&wait_next_vol);
pthread_mutex_destroy(&spool_mutex);
-// rwl_destroy(&lock);
+ pthread_mutex_destroy(&freespace_mutex);
if (attached_dcrs) {
delete attached_dcrs;
attached_dcrs = NULL;
}
- if (device) {
+ /* We let the DEVRES pointer if not our device */
+ if (device && device->dev == this) {
device->dev = NULL;
}
- free((char *)this);
+ delete this;
+ if (dev) {
+ dev->term();
+ }
+}
+
+/* Get freespace values */
+void DEVICE::get_freespace(uint64_t *freeval, uint64_t *totalval)
+{
+ get_os_device_freespace();
+ P(freespace_mutex);
+ if (is_freespace_ok()) {
+ *freeval = free_space;
+ *totalval = total_space;
+ } else {
+ *freeval = *totalval = 0;
+ }
+ V(freespace_mutex);
+}
+
+/* Set freespace values */
+void DEVICE::set_freespace(uint64_t freeval, uint64_t totalval, int errnoval, bool valid)
+{
+ P(freespace_mutex);
+ free_space = freeval;
+ total_space = totalval;
+ free_space_errno = errnoval;
+ if (valid) {
+ set_freespace_ok();
+ } else {
+ clear_freespace_ok();
+ }
+ V(freespace_mutex);
}
/*
/*
- * The dev timers are used for waiting on a particular device
+ * The dev timers are used for waiting on a particular device
*
* Returns: true if time doubled
* false if max time expired
return true;
}
-
-void set_os_device_parameters(DCR *dcr)
-{
- DEVICE *dev = dcr->dev;
-
- if (strcmp(dev->dev_name, "/dev/null") == 0) {
- return; /* no use trying to set /dev/null */
- }
-
-#if defined(HAVE_LINUX_OS) || defined(HAVE_WIN32)
- struct mtop mt_com;
-
- Dmsg0(100, "In set_os_device_parameters\n");
-#if defined(MTSETBLK)
- if (dev->min_block_size == dev->max_block_size &&
- dev->min_block_size == 0) { /* variable block mode */
- mt_com.mt_op = MTSETBLK;
- mt_com.mt_count = 0;
- Dmsg0(100, "Set block size to zero\n");
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSETBLK);
- }
- }
-#endif
-#if defined(MTSETDRVBUFFER)
- if (getuid() == 0) { /* Only root can do this */
- mt_com.mt_op = MTSETDRVBUFFER;
- mt_com.mt_count = MT_ST_CLEARBOOLEANS;
- if (!dev->has_cap(CAP_TWOEOF)) {
- mt_com.mt_count |= MT_ST_TWO_FM;
- }
- if (dev->has_cap(CAP_EOM)) {
- mt_com.mt_count |= MT_ST_FAST_MTEOM;
- }
- Dmsg0(100, "MTSETDRVBUFFER\n");
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSETDRVBUFFER);
- }
- }
-#endif
- return;
-#endif
-
-#ifdef HAVE_NETBSD_OS
- struct mtop mt_com;
- if (dev->min_block_size == dev->max_block_size &&
- dev->min_block_size == 0) { /* variable block mode */
- mt_com.mt_op = MTSETBSIZ;
- mt_com.mt_count = 0;
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSETBSIZ);
- }
- /* Get notified at logical end of tape */
- mt_com.mt_op = MTEWARN;
- mt_com.mt_count = 1;
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTEWARN);
- }
- }
- return;
-#endif
-
-#if HAVE_FREEBSD_OS || HAVE_OPENBSD_OS
- struct mtop mt_com;
- if (dev->min_block_size == dev->max_block_size &&
- dev->min_block_size == 0) { /* variable block mode */
- mt_com.mt_op = MTSETBSIZ;
- mt_com.mt_count = 0;
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSETBSIZ);
- }
- }
-#if defined(MTIOCSETEOTMODEL)
- uint32_t neof;
- if (dev->has_cap(CAP_TWOEOF)) {
- neof = 2;
- } else {
- neof = 1;
- }
- if (dev->d_ioctl(dev->fd(), MTIOCSETEOTMODEL, (caddr_t)&neof) < 0) {
- berrno be;
- dev->dev_errno = errno; /* save errno */
- Mmsg2(dev->errmsg, _("Unable to set eotmodel on device %s: ERR=%s\n"),
- dev->print_name(), be.bstrerror(dev->dev_errno));
- Jmsg(dcr->jcr, M_FATAL, 0, dev->errmsg);
- }
-#endif
- return;
-#endif
-
-#ifdef HAVE_SUN_OS
- struct mtop mt_com;
- if (dev->min_block_size == dev->max_block_size &&
- dev->min_block_size == 0) { /* variable block mode */
- mt_com.mt_op = MTSRSZ;
- mt_com.mt_count = 0;
- if (dev->d_ioctl(dev->fd(), MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSRSZ);
- }
- }
- return;
-#endif
-}
-
-static bool dev_get_os_pos(DEVICE *dev, struct mtget *mt_stat)
-{
- Dmsg0(100, "dev_get_os_pos\n");
- return dev->has_cap(CAP_MTIOCGET) &&
- dev->d_ioctl(dev->fd(), MTIOCGET, (char *)mt_stat) == 0 &&
- mt_stat->mt_fileno >= 0;
-}
-
static const char *modes[] = {
"CREATE_READ_WRITE",
"OPEN_READ_WRITE",
};
-static const char *mode_to_str(int mode)
+const char *mode_to_str(int mode)
{
static char buf[100];
if (mode < 1 || mode > 4) {
projects / bacula / bacula / blobdiff