* Version $Id$
*/
/*
- Copyright (C) 2000-2006 Kern Sibbald
+ Bacula® - The Network Backup Solution
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as amended with additional clauses defined in the
- file LICENSE in the main source directory.
+ Copyright (C) 2000-2006 Free Software Foundation Europe e.V.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- the file LICENSE for additional details.
+ The main author of Bacula is Kern Sibbald, with contributions from
+ many others, a complete list can be found in the file AUTHORS.
+ This program is Free Software; you can redistribute it and/or
+ modify it under the terms of version two of the GNU General Public
+ License as published by the Free Software Foundation plus additions
+ that are listed in the file LICENSE.
- */
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+ Bacula® is a registered trademark of John Walker.
+ The licensor of Bacula is the Free Software Foundation Europe
+ (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+ Switzerland, email:ftf@fsfeurope.org.
+*/
/*
* Handling I/O errors and end of tape conditions are a bit tricky.
* On either an I/O error or end of tape,
* we will stop writing on the physical device (no I/O recovery is
* attempted at least in this daemon). The state flag will be sent
- * to include ST_EOT, which is ephimeral, and ST_WEOT, which is
+ * to include ST_EOT, which is ephemeral, and ST_WEOT, which is
* persistent. Lots of routines clear ST_EOT, but ST_WEOT is
* cleared only when the problem goes away. Now when ST_WEOT
* is set all calls to write_block_to_device() call the fix_up
#endif
/* Forward referenced functions */
-void set_os_device_parameters(DEVICE *dev);
+void set_os_device_parameters(DCR *dcr);
static bool dev_get_os_pos(DEVICE *dev, struct mtget *mt_stat);
static char *mode_to_str(int mode);
} else if (S_ISCHR(statp.st_mode)) {
device->dev_type = B_TAPE_DEV;
} else if (S_ISFIFO(statp.st_mode)) {
- device->dev_type = B_FILE_DEV;
+ device->dev_type = B_FIFO_DEV;
} else if (!(device->cap_bits & CAP_REQMOUNT)) {
Jmsg2(jcr, M_ERROR, 0, _("%s is an unknown device type. Must be tape or directory\n"
" or have RequiresMount=yes for DVD. st_mode=%x\n"),
void DEVICE::open_tape_device(DCR *dcr, int omode)
{
file_size = 0;
- int timeout;
- int nonblocking = O_NONBLOCK;
- Dmsg0(29, "open dev: device is tape\n");
+ int timeout = max_open_wait;
+#if !defined(HAVE_WIN32)
+ struct mtop mt_com;
+ utime_t start_time = time(NULL);
+#endif
+
+
+ Dmsg0(29, "Open dev: device is tape\n");
get_autochanger_loaded_slot(dcr);
+ openmode = omode;
set_mode(omode);
- timeout = max_open_wait;
+
+ if (timeout < 1) {
+ timeout = 1;
+ }
errno = 0;
if (is_fifo() && timeout) {
/* Set open timer */
tid = start_thread_timer(pthread_self(), timeout);
}
- /* If busy retry each second for max_open_wait seconds */
- Dmsg3(100, "Try open %s mode=%s nonblocking=%d\n", print_name(),
- mode_to_str(omode), nonblocking);
- /* Use system open() */
-
+ Dmsg2(100, "Try open %s mode=%s\n", print_name(), mode_to_str(omode));
#if defined(HAVE_WIN32)
+
+ /* Windows Code */
if ((fd = tape_open(dev_name, mode)) < 0) {
- berrno be;
dev_errno = errno;
-
- Mmsg2(errmsg, _("Unable to open device %s: ERR=%s\n"),
- print_name(), be.strerror(dev_errno));
- Jmsg0(dcr->jcr, M_FATAL, 0, errmsg);
}
+
#else
- while ((fd = ::open(dev_name, mode+nonblocking)) < 0) {
- berrno be;
- dev_errno = errno;
- Dmsg5(050, "Open omode=%d mode=%x nonblock=%d error errno=%d ERR=%s\n",
- omode, mode, nonblocking, errno, be.strerror());
- if (dev_errno == EINTR || dev_errno == EAGAIN) {
- Dmsg0(100, "Continue open\n");
- continue;
- }
- /* Busy wait for specified time (default = 5 mins) */
- if (dev_errno == EBUSY && timeout-- > 0) {
- Dmsg2(100, "Device %s busy. ERR=%s\n", print_name(), be.strerror());
- bmicrosleep(1, 0);
- continue;
+
+ /* UNIX Code */
+ /* If busy retry each second for max_open_wait seconds */
+ for ( ;; ) {
+ /* Try non-blocking open */
+ fd = ::open(dev_name, mode+O_NONBLOCK);
+ if (fd < 0) {
+ berrno be;
+ dev_errno = errno;
+ Dmsg5(050, "Open error on %s omode=%d mode=%x errno=%d: ERR=%s\n",
+ print_name(), omode, mode, errno, be.strerror());
+ } else {
+ /* Tape open, now rewind it */
+ Dmsg0(050, "Rewind after open\n");
+ mt_com.mt_op = MTREW;
+ mt_com.mt_count = 1;
+ if (ioctl(fd, MTIOCTOP, (char *)&mt_com) < 0) {
+ berrno be;
+ dev_errno = errno; /* set error status from rewind */
+ ::close(fd);
+ clear_opened();
+ Dmsg2(100, "Rewind error on %s close: ERR=%s\n", print_name(),
+ be.strerror(dev_errno));
+ /* If we get busy, device is probably rewinding, try again */
+ if (dev_errno != EBUSY) {
+ break; /* error -- no medium */
+ }
+ } else {
+ /* Got fd and rewind worked, so we must have medium in drive */
+ ::close(fd);
+ fd = ::open(dev_name, mode); /* open normally */
+ if (fd < 0) {
+ berrno be;
+ dev_errno = errno;
+ Dmsg5(050, "Open error on %s omode=%d mode=%x errno=%d: ERR=%s\n",
+ print_name(), omode, mode, errno, be.strerror());
+ break;
+ }
+ dev_errno = 0;
+ lock_door();
+ set_os_device_parameters(dcr); /* do system dependent stuff */
+ break; /* Successfully opened and rewound */
+ }
}
- Mmsg2(errmsg, _("Unable to open device %s: ERR=%s\n"),
- print_name(), be.strerror(dev_errno));
- /* Stop any open timer we set */
- if (tid) {
- stop_thread_timer(tid);
- tid = 0;
+ bmicrosleep(5, 0);
+ /* Exceed wait time ? */
+ if (time(NULL) - start_time >= max_open_wait) {
+ break; /* yes, get out */
}
- Jmsg0(dcr->jcr, M_FATAL, 0, errmsg);
- break;
}
#endif
- if (this->is_open()) {
- openmode = omode; /* save open mode */
- set_blocking();
- Dmsg2(100, "openmode=%d %s\n", openmode, mode_to_str(openmode));
- dev_errno = 0;
- set_os_device_parameters(this); /* do system dependent stuff */
- } else {
- clear_opened();
+ if (!is_open()) {
+ berrno be;
+ Mmsg2(errmsg, _("Unable to open device %s: ERR=%s\n"),
+ print_name(), be.strerror(dev_errno));
+ Dmsg1(100, "%s", errmsg);
}
/* Stop any open() timer we started */
Dmsg1(29, "open dev: tape %d opened\n", fd);
}
-void DEVICE::set_blocking()
-{
- int oflags;
- /* Try to reset blocking */
-#ifdef xxx
- if ((oflags = fcntl(fd, F_GETFL, 0)) < 0 ||
- fcntl(fd, F_SETFL, oflags & ~O_NONBLOCK) < 0) {
- berrno be;
- ::close(fd); /* use system close() */
- fd = ::open(dev_name, mode);
- Dmsg2(100, "fcntl error. ERR=%s. Close-reopen fd=%d\n", be.strerror(), fd);
- }
-#endif
- oflags = fcntl(fd, F_GETFL, 0);
- if (oflags > 0 && (oflags & O_NONBLOCK)) {
- fcntl(fd, F_SETFL, oflags & ~O_NONBLOCK);
- }
-}
/*
* Open a file device
return;
}
- if (archive_name.c_str()[strlen(archive_name.c_str())-1] != '/') {
+ if (!IsPathSeparator(archive_name.c_str()[strlen(archive_name.c_str())-1])) {
pm_strcat(archive_name, "/");
}
pm_strcat(archive_name, VolCatInfo.VolCatName);
/*
* Handle opening of DVD Volume
*/
- Dmsg3(29, "Enter: open_dvd_dev: %s dev=%s mode=%s\n", is_dvd()?"DVD":"disk",
- archive_name.c_str(), mode_to_str(omode));
+ Dmsg2(29, "Enter: open_dvd_dev: DVD vol=%s mode=%s\n",
+ &dcr->VolCatInfo, mode_to_str(omode));
/*
- * For a DVD we must alway pull the state info from dcr->VolCatInfo
+ * For a DVD we must always pull the state info from dcr->VolCatInfo
* This is a bit ugly, but is necessary because we need to open/close/re-open
* the dvd file in order to properly mount/unmount and access the
* DVD. So we store the state of the DVD as far as is known in the
* catalog in dcr->VolCatInfo, and thus we refresh the dev->VolCatInfo
* copy here, when opening.
*/
- memcpy(&VolCatInfo, &dcr->VolCatInfo, sizeof(VolCatInfo));
+ VolCatInfo = dcr->VolCatInfo; /* structure assignment */
Dmsg1(100, "Volume=%s\n", VolCatInfo.VolCatName);
if (VolCatInfo.VolCatName[0] == 0) {
* OPEN_READ_ONLY as writing would be an error.
*/
Dmsg2(29, "open DVD part=%d num_dvd_parts=%d\n", part, num_dvd_parts);
+ /* Now find the name of the part that we want to access */
if (part <= num_dvd_parts) {
omode = OPEN_READ_ONLY;
make_mounted_dvd_filename(this, archive_name);
Dmsg3(99, "open_dvd_device: part=%d num_dvd_parts=%d, VolCatInfo.VolCatParts=%d\n",
part, num_dvd_parts, dcr->VolCatInfo.VolCatParts);
- if (mount_dvd(this, 1)) {
+ if (mount(1)) {
Dmsg0(99, "DVD device mounted.\n");
if (num_dvd_parts == 0 && !truncating) {
/*
* we continue (it's the method used by truncate_dvd to truncate a volume).
*/
if (!check_can_write_on_non_blank_dvd(dcr)) {
- Mmsg(errmsg, _("The media in the device %s is not empty, please blank it before writing anything to it.\n"), print_name());
+ Mmsg(errmsg, _("The DVD in device %s contains data, please blank it before writing.\n"), print_name());
Emsg0(M_FATAL, 0, errmsg);
- unmount_dvd(this, 1); /* Unmount the device, so the operator can change it. */
+ unmount(1); /* Unmount the device, so the operator can change it. */
clear_opened();
return;
}
blank_dvd = true;
+ } else {
+ /*
+ * Ensure that we have the correct DVD loaded by looking for part1.
+ * We only succeed the open if it exists. Failure to do this could
+ * leave us trying to add a part to a different DVD!
+ */
+ uint32_t oldpart = part;
+ struct stat statp;
+ POOL_MEM part1_name(PM_FNAME);
+ part = 1;
+ make_mounted_dvd_filename(this, part1_name);
+ part = oldpart;
+ if (stat(part1_name.c_str(), &statp) < 0) {
+ berrno be;
+ Mmsg(errmsg, _("Unable to stat DVD part 1 file %s: ERR=%s\n"),
+ part1_name.c_str(), be.strerror());
+ Emsg0(M_FATAL, 0, errmsg);
+ clear_opened();
+ return;
+ }
+ if (!S_ISREG(statp.st_mode)) {
+ /* It is not a regular file */
+ Mmsg(errmsg, _("DVD part 1 is not a regular file %s.\n"),
+ part1_name.c_str());
+ Emsg0(M_FATAL, 0, errmsg);
+ clear_opened();
+ return;
+ }
}
} else {
Dmsg0(99, "DVD device mount failed.\n");
/* We cannot mount the device */
if (num_dvd_parts == 0) {
/* Run free space, check there is a media. */
- if (!update_free_space_dev(this)) {
+ if (!update_freespace()) {
Emsg0(M_FATAL, 0, errmsg);
clear_opened();
return;
if (have_media()) {
Dmsg1(29, "Could not mount device %s, this is not a problem (num_dvd_parts == 0), and have media.\n", print_name());
} else {
- Mmsg(errmsg, _("There is no valid media in the device %s.\n"), print_name());
+ Mmsg(errmsg, _("There is no valid DVD in device %s.\n"), print_name());
Emsg0(M_FATAL, 0, errmsg);
clear_opened();
return;
}
} else {
- Mmsg(errmsg, _("Could not mount device %s.\n"), print_name());
+ Mmsg(errmsg, _("Could not mount DVD device %s.\n"), print_name());
Emsg0(M_FATAL, 0, errmsg);
clear_opened();
return;
break;
}
} else if (is_file() || is_dvd()) {
- if (lseek(dcr, (off_t)0, SEEK_SET) < 0) {
+ if (lseek(dcr, (boffset_t)0, SEEK_SET) < 0) {
berrno be;
dev_errno = errno;
Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
struct mtop mt_com;
struct mtget mt_stat;
bool ok = true;
- off_t pos;
+ boffset_t pos;
if (fd < 0) {
dev_errno = EBADF;
return true;
}
if (!is_tape()) {
- pos = lseek(dcr, (off_t)0, SEEK_END);
+ pos = lseek(dcr, (boffset_t)0, SEEK_END);
// Dmsg1(100, "====== Seek to %lld\n", pos);
if (pos >= 0) {
update_pos(dcr);
/*
* Avoid infinite loop by ensuring we advance.
*/
- if (file_num == (int)file) {
+ if (!at_eot() && file_num == (int)file) {
struct mtget mt_stat;
Dmsg1(100, "fsf did not advance from file %d\n", file_num);
set_ateof();
if (dev_get_os_pos(this, &mt_stat)) {
- Dmsg2(100, "Adjust file from %d to %d\n", file , mt_stat.mt_fileno);
+ Dmsg2(100, "Adjust file from %d to %d\n", file_num, mt_stat.mt_fileno);
file = mt_stat.mt_fileno;
}
break;
*/
bool DEVICE::update_pos(DCR *dcr)
{
- off_t pos;
+ boffset_t pos;
bool ok = true;
if (!is_open()) {
if (is_file() || is_dvd()) {
file = 0;
file_addr = 0;
- pos = lseek(dcr, (off_t)0, SEEK_CUR);
+ pos = lseek(dcr, (boffset_t)0, SEEK_CUR);
if (pos < 0) {
berrno be;
dev_errno = errno;
block_num = file = 0;
file_size = 0;
file_addr = 0;
-#ifdef MTUNLOCK
- mt_com.mt_op = MTUNLOCK;
- mt_com.mt_count = 1;
- tape_ioctl(fd, MTIOCTOP, (char *)&mt_com);
-#endif
+ unlock_door();
mt_com.mt_op = MTOFFL;
mt_com.mt_count = 1;
if (tape_ioctl(fd, MTIOCTOP, (char *)&mt_com) < 0) {
return stat == 0;
}
+void DEVICE::lock_door()
+{
+#ifdef MTLOCK
+ struct mtop mt_com;
+ mt_com.mt_op = MTLOCK;
+ mt_com.mt_count = 1;
+ tape_ioctl(fd, MTIOCTOP, (char *)&mt_com);
+#endif
+}
+
+void DEVICE::unlock_door()
+{
+#ifdef MTUNLOCK
+ struct mtop mt_com;
+ mt_com.mt_op = MTUNLOCK;
+ mt_com.mt_count = 1;
+ tape_ioctl(fd, MTIOCTOP, (char *)&mt_com);
+#endif
+}
+
+
/*
* Reposition the device to file, block
* Returns: false on failure
}
if (!is_tape()) {
- off_t pos = (((off_t)rfile)<<32) + (off_t)rblock;
+ boffset_t pos = (((boffset_t)rfile)<<32) | rblock;
Dmsg1(100, "===== lseek to %d\n", (int)pos);
- if (lseek(dcr, pos, SEEK_SET) == (off_t)-1) {
+ if (lseek(dcr, pos, SEEK_SET) == (boffset_t)-1) {
berrno be;
dev_errno = errno;
Mmsg2(errmsg, _("lseek error on %s. ERR=%s.\n"),
}
/* After this point, we are tape only */
- Dmsg4(100, "reposition from %u:%u to %u:%u\n",
- file, block_num, rfile, rblock);
+ Dmsg4(100, "reposition from %u:%u to %u:%u\n", file, block_num, rfile, rblock);
if (rfile < file) {
Dmsg0(100, "Rewind\n");
if (!rewind(NULL)) {
/* Ignore errors as Bacula can read to the correct block */
Dmsg1(100, "fsr %d\n", rblock-block_num);
return fsr(rblock-block_num);
+ } else {
+ while (rblock > block_num) {
+ if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
+ berrno be;
+ dev_errno = errno;
+ Dmsg2(30, "Failed to find requested block on %s: ERR=%s",
+ print_name(), be.strerror());
+ return false;
+ }
+ Dmsg2(300, "moving forward wanted_blk=%d at_blk=%d\n", rblock, block_num);
+ }
}
return true;
}
msg = "MTSETBLK";
break;
#endif
+#ifdef MTSETDRVBUFFER
+ case MTSETDRVBUFFER:
+ msg = "MTSETDRVBUFFER";
+ break;
+#endif
+#ifdef MTRESET
+ case MTRESET:
+ msg = "MTRESET";
+ break;
+#endif
+
#ifdef MTSETBSIZ
case MTSETBSIZ:
msg = "MTSETBSIZ";
offline();
}
- if (is_open()) {
- if (is_tape()) {
- tape_close(fd);
- } else {
- ::close(fd);
- }
- } else {
+ if (!is_open()) {
Dmsg2(100, "device %s already closed vol=%s\n", print_name(),
VolHdr.VolumeName);
return; /* already closed */
}
+ switch (dev_type) {
+ case B_TAPE_DEV:
+ unlock_door();
+ tape_close(fd);
+ break;
+ default:
+ ::close(fd);
+ }
+
/* Clean up device packet so it can be reused */
clear_opened();
state &= ~(ST_LABEL|ST_READ|ST_APPEND|ST_EOT|ST_WEOT|ST_EOF);
file_size = 0;
file_addr = 0;
EndFile = EndBlock = 0;
+ openmode = 0;
Slot = -1; /* unknown slot */
free_volume(this);
memset(&VolCatInfo, 0, sizeof(VolCatInfo));
stop_thread_timer(tid);
tid = 0;
}
- openmode = 0;
}
/*
VOLUME_CAT_INFO saveVolCatInfo; /* Volume Catalog Information */
- memcpy(&saveVolHdr, &VolHdr, sizeof(saveVolHdr));
- memcpy(&saveVolCatInfo, &VolCatInfo, sizeof(saveVolCatInfo));
+ saveVolHdr = VolHdr; /* structure assignment */
+ saveVolCatInfo = VolCatInfo; /* structure assignment */
close(); /* close current part */
- memcpy(&VolHdr, &saveVolHdr, sizeof(VolHdr));
- memcpy(&VolCatInfo, &saveVolCatInfo, sizeof(VolCatInfo));
- memcpy(&dcr->VolCatInfo, &saveVolCatInfo, sizeof(dcr->VolCatInfo));
+ VolHdr = saveVolHdr; /* structure assignment */
+ VolCatInfo = saveVolCatInfo; /* structure assignment */
+ dcr->VolCatInfo = saveVolCatInfo; /* structure assignment */
}
-off_t DEVICE::lseek(DCR *dcr, off_t offset, int whence)
+boffset_t DEVICE::lseek(DCR *dcr, boffset_t offset, int whence)
{
- if (is_dvd()) {
+ switch (dev_type) {
+ case B_DVD_DEV:
return lseek_dvd(dcr, offset, whence);
- }
- if (is_file()) {
- return ::lseek(fd, offset, whence);
+ case B_FILE_DEV:
+#if defined(HAVE_WIN32)
+ return ::_lseeki64(fd, (__int64)offset, whence);
+#else
+ return ::lseek(fd, (off_t)offset, whence);
+#endif
}
return -1;
}
bool DEVICE::truncate(DCR *dcr) /* We need the DCR for DVD-writing */
{
Dmsg1(100, "truncate %s\n", print_name());
- if (is_tape()) {
- return true; /* we don't really truncate tapes */
+ switch (dev_type) {
+ case B_TAPE_DEV:
/* maybe we should rewind and write and eof ???? */
- }
-
- if (is_dvd()) {
+ return true; /* we don't really truncate tapes */
+ case B_DVD_DEV:
return truncate_dvd(dcr);
+ case B_FILE_DEV:
+ /* ***FIXME*** we really need to unlink() the file so that
+ * its name can be changed for a relabel.
+ */
+ if (ftruncate(fd, 0) != 0) {
+ berrno be;
+ Mmsg2(errmsg, _("Unable to truncate device %s. ERR=%s\n"),
+ print_name(), be.strerror());
+ return false;
+ }
+ return true;
}
-
- if (ftruncate(fd, 0) != 0) {
- berrno be;
- Mmsg2(errmsg, _("Unable to truncate device %s. ERR=%s\n"),
- print_name(), be.strerror());
- return false;
- }
- return true;
+ return false;
}
/* Mount the device.
*/
bool DEVICE::unmount(int timeout)
{
- Dmsg0(90, "Enter unmount_dvd\n");
+ Dmsg0(90, "Enter unmount\n");
if (is_mounted()) {
return do_mount(0, timeout);
}
icmd = device->unmount_command;
}
+ clear_freespace_ok();
edit_mount_codes(ocmd, icmd);
- Dmsg2(000, "do_mount_dvd: cmd=%s mounted=%d\n", ocmd.c_str(), !!is_mounted());
+ Dmsg2(100, "do_mount: cmd=%s mounted=%d\n", ocmd.c_str(), !!is_mounted());
if (dotimeout) {
/* Try at most 1 time to (un)mount the device. This should perhaps be configurable. */
} else {
timeout = 0;
}
- results = get_memory(2000);
+ results = get_memory(4000);
results[0] = 0;
/* If busy retry each second */
while ((status = run_program_full_output(ocmd.c_str(),
max_open_wait/2, results)) != 0) {
/* Doesn't work with internationalization (This is not a problem) */
- if (fnmatch("*is already mounted on", results, 0) == 0) {
+ if (mount && fnmatch("*is already mounted on*", results, 0) == 0) {
+ break;
+ }
+ if (!mount && fnmatch("* not mounted*", results, 0) == 0) {
break;
}
if (timeout-- > 0) {
bmicrosleep(1, 0);
continue;
}
- Dmsg2(40, "Device %s cannot be mounted. ERR=%s\n", print_name(), results);
- Mmsg(errmsg, _("Device %s cannot be mounted. ERR=%s\n"),
- print_name(), results);
+ if (status != 0) {
+ berrno be;
+ Dmsg5(40, "Device %s cannot be %smounted. stat=%d result=%s ERR=%s\n", print_name(),
+ (mount ? "" : "un"), status, results, be.strerror(status));
+ Mmsg(errmsg, _("Device %s cannot be %smounted. ERR=%s\n"),
+ print_name(), (mount ? "" : "un"), be.strerror(status));
+ } else {
+ Dmsg4(40, "Device %s cannot be %smounted. stat=%d ERR=%s\n", print_name(),
+ (mount ? "" : "un"), status, results);
+ Mmsg(errmsg, _("Device %s cannot be %smounted. ERR=%s\n"),
+ print_name(), (mount ? "" : "un"), results);
+ }
/*
* Now, just to be sure it is not mounted, try to read the
* filesystem.
Dmsg1(29, "do_mount: got %d files in the mount point (not counting ., .. and .keep)\n", count);
if (count > 0) {
- mount = 1; /* If we got more than ., .. and .keep */
- break; /* there must be something mounted */
+ /* If we got more than ., .. and .keep */
+ /* there must be something mounted */
+ if (mount) {
+ Dmsg1(100, "Did Mount by count=%d\n", count);
+ break;
+ } else {
+ /* An unmount request. We failed to unmount - report an error */
+ set_mounted(true);
+ free_pool_memory(results);
+ Dmsg0(200, "== error mount=1 wanted unmount\n");
+ return false;
+ }
}
get_out:
set_mounted(false);
set_mounted(mount); /* set/clear mounted flag */
free_pool_memory(results);
+ /* Do not check free space when unmounting */
+ if (mount && !update_freespace()) {
+ return false;
+ }
Dmsg1(200, "============ mount=%d\n", mount);
return true;
}
}
-void set_os_device_parameters(DEVICE *dev)
+void set_os_device_parameters(DCR *dcr)
{
+ DEVICE *dev = dcr->dev;
+
#if defined(HAVE_LINUX_OS) || defined(HAVE_WIN32)
struct mtop mt_com;
+
+ Dmsg0(050, "In set_os_device_parameters\n");
+#if defined(MTSETBLK)
if (dev->min_block_size == dev->max_block_size &&
dev->min_block_size == 0) { /* variable block mode */
mt_com.mt_op = MTSETBLK;
mt_com.mt_count = 0;
+ Dmsg0(050, "Set block size to zero\n");
if (tape_ioctl(dev->fd, MTIOCTOP, (char *)&mt_com) < 0) {
dev->clrerror(MTSETBLK);
}
+ }
+#endif
+#if defined(MTSETDRVBUFFER)
+ if (getpid() == 0) { /* Only root can do this */
mt_com.mt_op = MTSETDRVBUFFER;
mt_com.mt_count = MT_ST_CLEARBOOLEANS;
if (!dev->has_cap(CAP_TWOEOF)) {
if (dev->has_cap(CAP_EOM)) {
mt_com.mt_count |= MT_ST_FAST_MTEOM;
}
+ Dmsg0(050, "MTSETDRVBUFFER\n");
if (tape_ioctl(dev->fd, MTIOCTOP, (char *)&mt_com) < 0) {
- dev->clrerror(MTSETBLK);
+ dev->clrerror(MTSETDRVBUFFER);
}
}
+#endif
return;
#endif
dev->clrerror(MTSETBSIZ);
}
}
+/* Turn this on later when fully tested */
+#if defined(xxxMTIOCSETEOTMODEL)
+ uint32_t neof;
+ if (dev_cap(dev, CAP_TWOEOF)) {
+ neof = 2;
+ } else {
+ neof = 1;
+ }
+ if (ioctl(dev->fd, MTIOCSETEOTMODEL, (caddr_t)&neof) < 0) {
+ berrno be;
+ dev->dev_errno = errno; /* save errno */
+ Mmsg2(dev->errmsg, _("Unable to set eotmodel on device %s: ERR=%s\n"),
+ dev->print_name(), be.strerror(dev->dev_errno));
+ Jmsg(dcr->jcr, M_FATAL, 0, dev->errmsg);
+ }
+#endif
return;
#endif
static bool dev_get_os_pos(DEVICE *dev, struct mtget *mt_stat)
{
+ Dmsg0(050, "dev_get_os_pos\n");
return dev->has_cap(CAP_MTIOCGET) &&
tape_ioctl(dev->fd, MTIOCGET, (char *)mt_stat) == 0 &&
mt_stat->mt_fileno >= 0;
projects / bacula / bacula / blobdiff