*
*/
/*
- Copyright (C) 2000-2004 Kern Sibbald and John Walker
+ Copyright (C) 2000-2005 Kern Sibbald
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
/* #define NEW_LOCK 1 */
-#define new_lock_device(dev) _new_lock_device(__FILE__, __LINE__, (dev))
+#define new_lock_device(dev) _new_lock_device(__FILE__, __LINE__, (dev))
#define new_lock_device_state(dev,state) _new_lock_device(__FILE__, __LINE__, (dev), (state))
#define new_unlock_device(dev) _new_unlock_device(__FILE__, __LINE__, (dev))
enum {
OPEN_READ_WRITE = 0,
OPEN_READ_ONLY,
- OPEN_WRITE_ONLY
+ OPEN_WRITE_ONLY
};
/* Generic status bits returned from status_dev() */
#define CAP_TWOEOF (1<<17) /* Write two eofs for EOM */
#define CAP_CLOSEONPOLL (1<<18) /* Close device on polling */
#define CAP_POSITIONBLOCKS (1<<19) /* Use block positioning */
+#define CAP_MTIOCGET (1<<20) /* Basic support for fileno and blkno */
+#define CAP_REQMOUNT (1<<21) /* Require mount to read files back (typically: DVD) */
+#define CAP_CHECKLABELS (1<<22) /* Check for ANSI/IBM labels */
/* Test state */
#define dev_state(dev, st_state) ((dev)->state & (st_state))
/* Device state bits */
#define ST_OPENED (1<<0) /* set when device opened */
-#define ST_TAPE (1<<1) /* is a tape device */
+#define ST_TAPE (1<<1) /* is a tape device */
#define ST_FILE (1<<2) /* is a file device */
#define ST_FIFO (1<<3) /* is a fifo device */
-#define ST_PROG (1<<4) /* is a program device */
-#define ST_LABEL (1<<5) /* label found */
-#define ST_MALLOC (1<<6) /* dev packet malloc'ed in init_dev() */
-#define ST_APPEND (1<<7) /* ready for Bacula append */
-#define ST_READ (1<<8) /* ready for Bacula read */
-#define ST_EOT (1<<9) /* at end of tape */
-#define ST_WEOT (1<<10) /* Got EOT on write */
-#define ST_EOF (1<<11) /* Read EOF i.e. zero bytes */
-#define ST_NEXTVOL (1<<12) /* Start writing on next volume */
-#define ST_SHORT (1<<13) /* Short block read */
+#define ST_DVD (1<<4) /* is a DVD device */
+#define ST_PROG (1<<5) /* is a program device */
+#define ST_LABEL (1<<6) /* label found */
+#define ST_MALLOC (1<<7) /* dev packet malloc'ed in init_dev() */
+#define ST_APPEND (1<<8) /* ready for Bacula append */
+#define ST_READ (1<<9) /* ready for Bacula read */
+#define ST_EOT (1<<10) /* at end of tape */
+#define ST_WEOT (1<<11) /* Got EOT on write */
+#define ST_EOF (1<<12) /* Read EOF i.e. zero bytes */
+#define ST_NEXTVOL (1<<13) /* Start writing on next volume */
+#define ST_SHORT (1<<14) /* Short block read */
+#define ST_MOUNTED (1<<15) /* the device is mounted to the mount point */
+#define ST_OFFLINE (1<<16) /* set offline by operator */
/* dev_blocked states (mutually exclusive) */
enum {
BST_UNMOUNTED, /* User unmounted device */
BST_WAITING_FOR_SYSOP, /* Waiting for operator to mount tape */
BST_DOING_ACQUIRE, /* Opening/validating/moving tape */
- BST_WRITING_LABEL, /* Labeling a tape */
+ BST_WRITING_LABEL, /* Labeling a tape */
BST_UNMOUNTED_WAITING_FOR_SYSOP, /* Closed by user during mount request */
BST_MOUNT /* Mount request */
};
uint32_t VolCatFiles; /* Number of files */
uint32_t VolCatBlocks; /* Number of blocks */
uint64_t VolCatBytes; /* Number of bytes written */
+ uint32_t VolCatParts; /* Number of parts written */
uint32_t VolCatMounts; /* Number of mounts this volume */
uint32_t VolCatErrors; /* Number of errors this volume */
uint32_t VolCatWrites; /* Number of writes this volume */
uint32_t VolCatRecycles; /* Number of recycles this volume */
uint32_t EndFile; /* Last file number */
uint32_t EndBlock; /* Last block number */
+ int32_t LabelType; /* Bacula/ANSI/IBM */
int32_t Slot; /* Slot in changer */
bool InChanger; /* Set if vol in current magazine */
uint32_t VolCatMaxJobs; /* Maximum Jobs to write to volume */
uint64_t VolWriteTime; /* time spent writing this Volume */
char VolCatStatus[20]; /* Volume status */
char VolCatName[MAX_NAME_LENGTH]; /* Desired volume to mount */
-};
+};
typedef struct s_steal_lock {
} bsteal_lock_t;
struct DEVRES; /* Device resource defined in stored_conf.h */
+int weof_dev(DEVICE *dev, int num);
+bool rewind_dev(DEVICE *dev);
/*
* Device structure definition. There is one of these for
- * each physical device. Everything here is "global" to
+ * each physical device. Everything here is "global" to
* that device and effects all jobs using the device.
*/
-struct DEVICE {
+class DEVICE {
public:
- DEVICE *next; /* pointer to next open device */
- DEVICE *prev; /* pointer to prev open device */
- JCR *attached_jcrs; /* attached JCR list */
dlist *attached_dcrs; /* attached DCR list */
pthread_mutex_t mutex; /* access control */
pthread_mutex_t spool_mutex; /* mutex for updating spool_size */
int dev_prev_blocked; /* previous blocked state */
int num_waiting; /* number of threads waiting */
int num_writers; /* number of writing threads */
+ int reserved_device; /* number of device reservations */
/* New access control in process of being implemented */
brwlock_t lock; /* New mutual exclusion lock */
- int use_count; /* usage count on this device */
+ int use_count; /* usage count on this device 0 or 1 */
int fd; /* file descriptor */
int capabilities; /* capabilities mask */
int state; /* state mask */
int dev_errno; /* Our own errno */
int mode; /* read/write modes */
+ int openmode; /* parameter passed to open_dev (useful to reopen the device) */
+ bool autoselect; /* Autoselect in autochanger */
+ bool open_nowait; /* If set, don t wait on open */
+ int label_type; /* Bacula/ANSI/IBM label types */
uint32_t drive_index; /* Autochanger drive index */
- POOLMEM *dev_name; /* device name */
+ POOLMEM *dev_name; /* Physical device name */
+ POOLMEM *prt_name; /* Name used for display purposes */
char *errmsg; /* nicely edited error message */
uint32_t block_num; /* current block number base 0 */
uint32_t file; /* current file number base 0 */
uint64_t max_file_size; /* max file size to put in one file on volume */
uint64_t volume_capacity; /* advisory capacity */
uint64_t max_spool_size; /* maximum spool file size */
- uint64_t spool_size; /* curren spool size */
+ uint64_t spool_size; /* current spool size for this device */
uint32_t max_rewind_wait; /* max secs to allow for rewind */
uint32_t max_open_wait; /* max secs to allow for open */
uint32_t max_open_vols; /* max simultaneous open volumes */
+
+ uint64_t max_part_size; /* max part size */
+ uint64_t part_size; /* current part size */
+ uint32_t part; /* current part number */
+ uint64_t part_start; /* current part start address (relative to the whole volume) */
+ uint32_t num_parts; /* number of parts (total) */
+ uint64_t free_space; /* current free space on medium (without the current part) */
+ int free_space_errno; /* indicates:
+ * - free_space_errno == 0: ignore free_space.
+ * - free_space_errno < 0: an error occured.
+ * - free_space_errno > 0: free_space is valid. */
+
utime_t vol_poll_interval; /* interval between polling Vol mount */
DEVRES *device; /* pointer to Device Resource */
btimer_t *tid; /* timer id */
VOLUME_CAT_INFO VolCatInfo; /* Volume Catalog Information */
VOLUME_LABEL VolHdr; /* Actual volume label */
-
+ char pool_name[MAX_NAME_LENGTH]; /* pool name */
+ char pool_type[MAX_NAME_LENGTH]; /* pool type */
+
+
+
+
+
/* Device wait times ***FIXME*** look at durations */
char BadVolName[MAX_NAME_LENGTH]; /* Last wrong Volume mounted */
bool poll; /* set to poll Volume */
int wait_sec;
int rem_wait_sec;
int num_wait;
+
+ /* Methods */
+ int is_tape() const { return state & ST_TAPE; }
+ int is_file() const { return state & ST_FILE; }
+ int is_fifo() const { return state & ST_FIFO; }
+ int is_dvd() const { return state & ST_DVD; }
+ int is_open() const { return state & ST_OPENED; }
+ int is_offline() const { return state & ST_OFFLINE; }
+ int is_labeled() const { return state & ST_LABEL; }
+ int is_busy() const; /* either reading or writing */
+ int at_eof() const { return state & ST_EOF; }
+ int at_eot() const { return state & ST_EOT; }
+ int at_weot() const { return state & ST_WEOT; }
+ int can_append() const { return state & ST_APPEND; }
+ /*
+ * can_write() is meant for checking at the end of a job to see
+ * if we still have a tape (perhaps not if at end of tape
+ * and the job is canceled).
+ */
+ int can_write() const { return is_open() && can_append() &&
+ is_labeled() && !at_weot(); }
+ int can_read() const { return state & ST_READ; }
+ bool can_steal_lock() const { return dev_blocked &&
+ (dev_blocked == BST_UNMOUNTED ||
+ dev_blocked == BST_WAITING_FOR_SYSOP ||
+ dev_blocked == BST_UNMOUNTED_WAITING_FOR_SYSOP); };
+ bool waiting_for_mount() const { return
+ (dev_blocked == BST_UNMOUNTED ||
+ dev_blocked == BST_WAITING_FOR_SYSOP ||
+ dev_blocked == BST_UNMOUNTED_WAITING_FOR_SYSOP); };
+ bool weof() { return !weof_dev(this, 1); };
+ bool fsr(int num); /* in dev.c */
+ bool rewind() { return rewind_dev(this); };
+ const char *strerror() const;
+ const char *archive_name() const;
+ const char *name() const;
+ const char *print_name() const; /* Name for display purposes */
+ void set_eof(); /* in dev.c */
+ void set_eot(); /* in dev.c */
+ void set_append() { state |= ST_APPEND; };
+ void set_labeled() { state |= ST_LABEL; };
+ void set_read() { state |= ST_READ; };
+ void set_offline() { state |= ST_OFFLINE; };
+ void clear_append() { state &= ~ST_APPEND; };
+ void clear_read() { state &= ~ST_READ; };
+ void clear_labeled() { state &= ~ST_LABEL; };
+ void clear_offline() { state &= ~ST_OFFLINE; };
+ void clear_eot() { state &= ~ST_EOT; };
+ void clear_eof() { state &= ~ST_EOF; };
+ void block(int why); /* in dev.c */
+ void unblock(); /* in dev.c */
};
+/* Note, these return int not bool! */
+inline int DEVICE::is_busy() const { return state & ST_READ || num_writers || reserved_device; }
+inline const char *DEVICE::strerror() const { return errmsg; }
+inline const char *DEVICE::archive_name() const { return dev_name; }
+inline const char *DEVICE::print_name() const { return prt_name; }
+
/*
- * Device Context (or Control) Record.
- * There is one of these records for each Job that is using
+ * Device Context (or Control) Record.
+ * There is one of these records for each Job that is using
* the device. Items in this record are "local" to the Job and
- * do not affect other Jobs.
+ * do not affect other Jobs. Note, a job can have multiple
+ * DCRs open, each pointing to a different device.
*/
class DCR {
public:
dlink dev_link; /* link to attach to dev */
JCR *jcr; /* pointer to JCR */
DEVICE *dev; /* pointer to device */
+ DEVRES *device; /* pointer to device resource */
DEV_BLOCK *block; /* pointer to block */
DEV_RECORD *rec; /* pointer to record */
int spool_fd; /* fd if spooling */
bool NewVol; /* set if new Volume mounted */
bool WroteVol; /* set if Volume written */
bool NewFile; /* set when EOF written */
+ bool reserved_device; /* set if reserve done */
uint32_t VolFirstIndex; /* First file index this Volume */
uint32_t VolLastIndex; /* Last file index this Volume */
uint32_t FileIndex; /* Current File Index */
uint32_t StartFile; /* Start write file */
uint32_t StartBlock; /* Start write block */
uint32_t EndBlock; /* Ending block written */
- int64_t spool_size; /* Current spool size */
- int64_t max_spool_size; /* Max job spool size */
+ int64_t job_spool_size; /* Current job spool size */
+ int64_t max_job_spool_size; /* Max job spool size */
char VolumeName[MAX_NAME_LENGTH]; /* Volume name */
char pool_name[MAX_NAME_LENGTH]; /* pool name */
char pool_type[MAX_NAME_LENGTH]; /* pool type */
char media_type[MAX_NAME_LENGTH]; /* media type */
char dev_name[MAX_NAME_LENGTH]; /* dev name */
+ int Copy; /* identical copy number */
+ int Stripe; /* RAIT stripe */
VOLUME_CAT_INFO VolCatInfo; /* Catalog info for desired volume */
};
projects / bacula / bacula / blobdiff