/*
Bacula® - The Network Backup Solution
- Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
+ Copyright (C) 2000-2012 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
+ modify it under the terms of version three of the GNU Affero General Public
License as published by the Free Software Foundation and included
in the file LICENSE.
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Affero General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of Kern Sibbald.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
*
* Kern Sibbald, MM
*
- * Version $Id$
- *
*/
/*
*
*/
-
#ifndef __DEV_H
#define __DEV_H 1
B_TAPE_DEV,
B_DVD_DEV,
B_FIFO_DEV,
- B_VTL_DEV
+ B_VTAPE_DEV, /* change to B_TAPE_DEV after init */
+ B_FTP_DEV,
+ B_VTL_DEV
};
/* Generic status bits returned from status_dev() */
#define CAP_CLOSEONPOLL (1<<18) /* Close device on polling */
#define CAP_POSITIONBLOCKS (1<<19) /* Use block positioning */
#define CAP_MTIOCGET (1<<20) /* Basic support for fileno and blkno */
-#define CAP_REQMOUNT (1<<21) /* Require mount to read files back (typically: DVD) */
+#define CAP_REQMOUNT (1<<21) /* Require mount/unmount */
#define CAP_CHECKLABELS (1<<22) /* Check for ANSI/IBM labels */
+#define CAP_BLOCKCHECKSUM (1<<23) /* Create/test block checksum */
/* Test state */
#define dev_state(dev, st_state) ((dev)->state & (st_state))
utime_t VolFirstWritten; /* Time of first write */
utime_t VolLastWritten; /* Time of last write */
bool InChanger; /* Set if vol in current magazine */
+ bool is_valid; /* set if this data is valid */
char VolCatStatus[20]; /* Volume status */
char VolCatName[MAX_NAME_LENGTH]; /* Desired volume to mount */
};
-
class DEVRES; /* Device resource defined in stored_conf.h */
-
class DCR; /* forward reference */
class VOLRES; /* forward reference */
-
/*
* Device structure definition. There is one of these for
* each physical device. Everything here is "global" to
* that device and effects all jobs using the device.
*/
-class DEVICE {
-private:
+class DEVICE: public SMARTALLOC {
+protected:
int m_fd; /* file descriptor */
+private:
int m_blocked; /* set if we must wait (i.e. change tape) */
int m_count; /* Mutex use count -- DEBUG only */
+ int m_num_reserved; /* counter of device reservations */
+ int32_t m_slot; /* slot loaded in drive or -1 if none */
pthread_t m_pid; /* Thread that locked -- DEBUG only */
bool m_unload; /* set when Volume must be unloaded */
bool m_load; /* set when Volume must be loaded */
- int m_num_reserved; /* counter of device reservations */
+
public:
+ DEVICE() {};
+ virtual ~DEVICE() {};
DEVICE * volatile swap_dev; /* Swap vol from this device */
dlist *attached_dcrs; /* attached DCR list */
- pthread_mutex_t m_mutex; /* access control */
- pthread_mutex_t spool_mutex; /* mutex for updating spool_size */
+ bthread_mutex_t m_mutex; /* access control */
+ bthread_mutex_t spool_mutex; /* mutex for updating spool_size */
+ bthread_mutex_t acquire_mutex; /* mutex for acquire code */
+ pthread_mutex_t read_acquire_mutex; /* mutex for acquire read code */
pthread_cond_t wait; /* thread wait variable */
pthread_cond_t wait_next_vol; /* wait for tape to be mounted */
pthread_t no_wait_id; /* this thread must not wait */
bool initiated; /* set when init_dev() called */
int label_type; /* Bacula/ANSI/IBM label types */
uint32_t drive_index; /* Autochanger drive index (base 0) */
- int32_t Slot; /* Slot currently in drive (base 1) */
POOLMEM *dev_name; /* Physical device name */
POOLMEM *prt_name; /* Name used for display purposes */
char *errmsg; /* nicely edited error message */
uint32_t block_num; /* current block number base 0 */
+ uint32_t LastBlock; /* last DEV_BLOCK number written to Volume */
uint32_t file; /* current file number base 0 */
uint64_t file_addr; /* Current file read/write address */
uint64_t file_size; /* Current file size */
uint32_t EndFile; /* last file written */
uint32_t min_block_size; /* min block size */
uint32_t max_block_size; /* max block size */
+ uint32_t max_concurrent_jobs; /* maximum simultaneous jobs this drive */
uint64_t max_volume_size; /* max bytes to put on one volume */
uint64_t max_file_size; /* max file size to put in one file on volume */
uint64_t volume_capacity; /* advisory capacity */
char pool_name[MAX_NAME_LENGTH]; /* pool name */
char pool_type[MAX_NAME_LENGTH]; /* pool type */
- /* Device wait times ***FIXME*** look at durations */
- char BadVolName[MAX_NAME_LENGTH]; /* Last wrong Volume mounted */
+ char UnloadVolName[MAX_NAME_LENGTH]; /* Last wrong Volume mounted */
bool poll; /* set to poll Volume */
+ /* Device wait times ***FIXME*** look at durations */
int min_wait;
int max_wait;
int max_num_wait;
int has_cap(int cap) const { return capabilities & cap; }
void clear_cap(int cap) { capabilities &= ~cap; }
void set_cap(int cap) { capabilities |= cap; }
+ bool do_checksum() const { return (capabilities & CAP_BLOCKCHECKSUM) != 0; }
int is_autochanger() const { return capabilities & CAP_AUTOCHANGER; }
int requires_mount() const { return capabilities & CAP_REQMOUNT; }
int is_removable() const { return capabilities & CAP_REM; }
- int is_tape() const { return dev_type == B_TAPE_DEV; }
+ int is_tape() const { return (dev_type == B_TAPE_DEV ||
+ dev_type == B_VTAPE_DEV); }
+ int is_ftp() const { return dev_type == B_FTP_DEV; }
int is_file() const { return dev_type == B_FILE_DEV; }
int is_fifo() const { return dev_type == B_FIFO_DEV; }
int is_dvd() const { return dev_type == B_DVD_DEV; }
int is_vtl() const { return dev_type == B_VTL_DEV; }
+ int is_vtape() const { return dev_type == B_VTAPE_DEV; }
int is_open() const { return m_fd >= 0; }
int is_offline() const { return state & ST_OFFLINE; }
int is_labeled() const { return state & ST_LABEL; }
void set_part_spooled(int val) { if (val) state |= ST_PART_SPOOLED; \
else state &= ~ST_PART_SPOOLED;
};
- void set_unload() { m_unload = true; };
+ bool is_volume_to_unload() const { \
+ return m_unload && strcmp(VolHdr.VolumeName, UnloadVolName) == 0; };
void set_load() { m_load = true; };
void inc_reserved() { m_num_reserved++; }
void set_mounted(int val) { if (val) state |= ST_MOUNTED; \
void clear_media() { state &= ~ST_MEDIA; };
void clear_short_block() { state &= ~ST_SHORT; };
void clear_freespace_ok() { state &= ~ST_FREESPACE_OK; };
- void clear_unload() { m_unload = false; };
+ void clear_unload() { m_unload = false; UnloadVolName[0] = 0; };
void clear_load() { m_load = false; };
char *bstrerror(void) { return errmsg; };
char *print_errmsg() { return errmsg; };
+ int32_t get_slot() const { return m_slot; };
+ void setVolCatInfo(bool valid) { VolCatInfo.is_valid = valid; };
+ bool haveVolCatInfo() const { return VolCatInfo.is_valid; };
+ void setVolCatName(const char *name) {
+ bstrncpy(VolCatInfo.VolCatName, name, sizeof(VolCatInfo.VolCatName));
+ setVolCatInfo(false);
+ };
+ char *getVolCatName() { return VolCatInfo.VolCatName; };
-
+ void set_unload(); /* in dev.c */
void clear_volhdr(); /* in dev.c */
void close(); /* in dev.c */
void close_part(DCR *dcr); /* in dev.c */
- bool truncate(DCR *dcr); /* in dev.c */
int open(DCR *dcr, int mode); /* in dev.c */
void term(void); /* in dev.c */
ssize_t read(void *buf, size_t len); /* in dev.c */
ssize_t write(const void *buf, size_t len); /* in dev.c */
- bool rewind(DCR *dcr); /* in dev.c */
bool mount(int timeout); /* in dev.c */
bool unmount(int timeout); /* in dev.c */
void edit_mount_codes(POOL_MEM &omsg, const char *imsg); /* in dev.c */
bool scan_dir_for_volume(DCR *dcr); /* in scan.c */
bool reposition(DCR *dcr, uint32_t rfile, uint32_t rblock); /* in dev.c */
void clrerror(int func); /* in dev.c */
- boffset_t lseek(DCR *dcr, boffset_t offset, int whence); /* in dev.c */
- bool update_pos(DCR *dcr); /* in dev.c */
+ void set_slot(int32_t slot); /* in dev.c */
+ void clear_slot(); /* in dev.c */
+
+
bool update_freespace(); /* in dvd.c */
uint32_t get_file() const { return file; };
uint32_t get_block_num() const { return block_num; };
int fd() const { return m_fd; };
+ /* low level operations */
+ virtual int d_ioctl(int fd, ioctl_req_t request, char *mt_com=NULL);
+ virtual int d_open(const char *pathname, int flags);
+ virtual int d_close(int fd);
+ virtual ssize_t d_read(int fd, void *buffer, size_t count);
+ virtual ssize_t d_write(int fd, const void *buffer, size_t count);
+ virtual boffset_t lseek(DCR *dcr, boffset_t offset, int whence);
+ virtual bool update_pos(DCR *dcr);
+ virtual bool rewind(DCR *dcr);
+ virtual bool truncate(DCR *dcr);
+ virtual void open_device(DCR *dcr, int omode);
/*
* Locking and blocking calls
*/
#ifdef SD_DEBUG_LOCK
- void _r_dlock(const char *, int); /* in lock.c */
+ void _r_dlock(const char *, int, bool locked=false); /* in lock.c */
void _r_dunlock(const char *, int); /* in lock.c */
void _dlock(const char *, int); /* in lock.c */
void _dunlock(const char *, int); /* in lock.c */
#else
- void r_dlock(); /* in lock.c */
+ void r_dlock(bool locked=false); /* in lock.c */
void r_dunlock() { dunlock(); }
void dlock() { P(m_mutex); }
void dunlock() { V(m_mutex); }
#endif
void dblock(int why); /* in lock.c */
void dunblock(bool locked=false); /* in lock.c */
+ bool is_device_unmounted(); /* in lock.c */
void set_blocked(int block) { m_blocked = block; };
int blocked() const { return m_blocked; };
bool is_blocked() const { return m_blocked != BST_NOT_BLOCKED; };
const char *print_blocked() const; /* in dev.c */
private:
- bool do_mount(int mount, int timeout); /* in dev.c */
- void set_mode(int omode); /* in dev.c */
- void open_tape_device(DCR *dcr, int omode); /* in dev.c */
- void open_file_device(DCR *dcr, int omode); /* in dev.c */
- void open_dvd_device(DCR *dcr, int omode); /* in dev.c */
+ bool do_tape_mount(int mount, int dotimeout); /* in dev.c */
+ bool do_file_mount(int mount, int dotimeout); /* in dev.c */
+ void set_mode(int omode); /* in dev.c */
+ void open_tape_device(DCR *dcr, int omode); /* in dev.c */
+ void open_file_device(DCR *dcr, int omode); /* in dev.c */
};
inline const char *DEVICE::strerror() const { return errmsg; }
* the device. Items in this record are "local" to the Job and
* do not affect other Jobs. Note, a job can have multiple
* DCRs open, each pointing to a different device.
+ * Normally, there is only one JCR thread per DCR. However, the
+ * big and important exception to this is when a Job is being
+ * canceled. At that time, there may be two threads using the
+ * same DCR. Consequently, when creating/attaching/detaching
+ * and freeing the DCR we must lock it (m_mutex).
*/
class DCR {
private:
public:
dlink dev_link; /* link to attach to dev */
JCR *jcr; /* pointer to JCR */
+ bthread_mutex_t m_mutex; /* access control */
DEVICE * volatile dev; /* pointer to device */
DEVRES *device; /* pointer to device resource */
DEV_BLOCK *block; /* pointer to block */
void clear_found_in_use() { m_found_in_use = false; };
bool is_reserved() const { return m_reserved; };
bool is_dev_locked() { return m_dev_locked; }
+#ifdef SD_DEBUG_LOCK
+ void _dlock(const char *, int); /* in lock.c */
+ void _dunlock(const char *, int); /* in lock.c */
+#else
void dlock() { dev->dlock(); m_dev_locked = true; }
void dunlock() { m_dev_locked = false; dev->dunlock(); }
+#endif
void dblock(int why) { dev->dblock(why); }
+ void setVolCatInfo(bool valid) { VolCatInfo.is_valid = valid; };
+ bool haveVolCatInfo() const { return VolCatInfo.is_valid; };
+ void setVolCatName(const char *name) {
+ bstrncpy(VolCatInfo.VolCatName, name, sizeof(VolCatInfo.VolCatName));
+ setVolCatInfo(false);
+ };
+ char *getVolCatName() { return VolCatInfo.VolCatName; };
/* Methods in reserve.c */
void clear_reserved();
void set_reserved();
void unreserve_device();
+
+ /* Methods in vol_mgr.c */
bool can_i_use_volume();
+ bool can_i_write_volume();
/* Methods in mount.c */
bool mount_next_write_volume();
void mark_volume_in_error();
void mark_volume_not_inchanger();
int try_autolabel(bool opened);
+ bool find_a_volume();
bool is_suitable_volume_mounted();
bool is_eod_valid();
int check_volume_label(bool &ask, bool &autochanger);
void release_volume();
- void do_swapping();
+ void do_swapping(bool is_writing);
+ bool do_unload();
+ bool do_load(bool is_writing);
+ bool is_tape_position_ok();
};
/*
class VOLRES {
bool m_swapping; /* set when swapping to another drive */
bool m_in_use; /* set when volume reserved or in use */
+ int32_t m_slot; /* slot of swapping volume */
+ uint32_t m_JobId; /* JobId for read volumes */
public:
dlink link;
char *vol_name; /* Volume name */
bool is_in_use() const { return m_in_use; };
void set_in_use() { m_in_use = true; };
void clear_in_use() { m_in_use = false; };
+ void set_slot(int32_t slot) { m_slot = slot; };
+ void clear_slot() { m_slot = -1; };
+ int32_t get_slot() const { return m_slot; };
+ uint32_t get_jobid() const { return m_JobId; };
+ void set_jobid(uint32_t JobId) { m_JobId = JobId; };
};