+/*
+ Bacula(R) - The Network Backup Solution
+
+ Copyright (C) 2000-2017 Kern Sibbald
+
+ The original author of Bacula is Kern Sibbald, with contributions
+ from many others, a complete list can be found in the file AUTHORS.
+
+ You may use this file and others of this release according to the
+ license defined in the LICENSE file, which includes the Affero General
+ Public License, v3.0 ("AGPLv3") and some additional permissions and
+ terms pursuant to its AGPLv3 Section 7.
+
+ This notice must be preserved when any source code is
+ conveyed and/or propagated.
+
+ Bacula(R) is a registered trademark of Kern Sibbald.
+*/
/*
*
* Higher Level Device routines.
* Obviously, no zzz_dev() is allowed to call
* a www_device() or everything falls apart.
*
- * Concerning the routines lock_device() and block_device()
+ * Concerning the routines dev->rLock()() and block_device()
* see the end of this module for details. In general,
* blocking a device leaves it in a state where all threads
* other than the current thread block when they attempt to
*
* Kern Sibbald, MM, MMI
*
- * Version $Id$
- */
-/*
- Copyright (C) 2000-2005 Kern Sibbald
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
-
*/
#include "bacula.h" /* pull in global headers */
/* Forward referenced functions */
-extern char my_name[];
-extern int debug_level;
-
/*
* This is the dreaded moment. We either have an end of
* medium condition or worse, and error condition.
* We enter with device locked, and
* exit with device locked.
*
- * Note, we are called only from one place in block.c
+ * Note, we are called only from one place in block.c for the daemons.
+ * The btape utility calls it from btape.c.
*
* Returns: true on success
* false on failure
*/
-bool fixup_device_block_write_error(DCR *dcr)
+bool fixup_device_block_write_error(DCR *dcr, int retries)
{
- uint32_t stat;
char PrevVolName[MAX_NAME_LENGTH];
- DEV_BLOCK *label_blk;
DEV_BLOCK *block = dcr->block;
+ DEV_BLOCK *ameta_block = dcr->ameta_block;
+ DEV_BLOCK *adata_block = dcr->adata_block;
char b1[30], b2[30];
time_t wait_time;
char dt[MAX_TIME_LENGTH];
JCR *jcr = dcr->jcr;
- DEVICE *dev = dcr->dev;
-
- wait_time = time(NULL);
- stat = status_dev(dev);
- if (!(stat & BMT_EOD)) {
- return false; /* this really shouldn't happen */
+ DEVICE *dev;
+ int blocked; /* save any previous blocked status */
+ bool ok = false;
+ bool save_adata = dcr->dev->adata;
+
+ Enter(100);
+ if (save_adata) {
+ dcr->set_ameta(); /* switch to working with ameta */
}
+ dev = dcr->dev;
+ blocked = dev->blocked();
- Dmsg0(100, "======= Got EOD ========\n");
+ wait_time = time(NULL);
+ /*
+ * If we are blocked at entry, unblock it, and set our own block status
+ */
+ if (blocked != BST_NOT_BLOCKED) {
+ unblock_device(dev);
+ }
block_device(dev, BST_DOING_ACQUIRE);
- /* Unlock, but leave BLOCKED */
- unlock_device(dev);
- bstrncpy(PrevVolName, dev->VolCatInfo.VolCatName, sizeof(PrevVolName));
- bstrncpy(dev->VolHdr.PrevVolName, PrevVolName, sizeof(dev->VolHdr.PrevVolName));
+ /* Continue unlocked, but leave BLOCKED */
+ dev->Unlock();
+
+ bstrncpy(PrevVolName, dev->getVolCatName(), sizeof(PrevVolName));
+ bstrncpy(dev->VolHdr.PrevVolumeName, PrevVolName, sizeof(dev->VolHdr.PrevVolumeName));
- label_blk = new_block(dev);
- dcr->block = label_blk;
+ dev->new_dcr_blocks(dcr);
/* Inform User about end of medium */
Jmsg(jcr, M_INFO, 0, _("End of medium on Volume \"%s\" Bytes=%s Blocks=%s at %s.\n"),
edit_uint64_with_commas(dev->VolCatInfo.VolCatBlocks, b2),
bstrftime(dt, sizeof(dt), time(NULL)));
- if (!mount_next_write_volume(dcr, 1)) {
- free_block(label_blk);
+ Dmsg1(150, "set_unload dev=%s\n", dev->print_name());
+ dev->set_unload();
+
+ /* Clear DCR Start/End Block/File positions */
+ dcr->VolFirstIndex = dcr->VolLastIndex = 0;
+ dcr->StartAddr = dcr->EndAddr = 0;
+ dcr->VolMediaId = 0;
+ dcr->WroteVol = false;
+
+ if (!dcr->mount_next_write_volume()) {
+ dev->free_dcr_blocks(dcr);
dcr->block = block;
- P(dev->mutex);
- unblock_device(dev);
- return false; /* device locked */
+ dcr->ameta_block = ameta_block;
+ dcr->adata_block = adata_block;
+ dev->Lock();
+ goto bail_out;
+ }
+ Dmsg2(150, "must_unload=%d dev=%s\n", dev->must_unload(), dev->print_name());
+
+ dev->notify_newvol_in_attached_dcrs(dcr->VolumeName);
+ dev->Lock(); /* lock again */
+
+ dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
+ if (!dir_update_volume_info(dcr, false, false)) { /* send Volume info to Director */
+ goto bail_out;
}
- P(dev->mutex); /* lock again */
Jmsg(jcr, M_INFO, 0, _("New volume \"%s\" mounted on device %s at %s.\n"),
dcr->VolumeName, dev->print_name(), bstrftime(dt, sizeof(dt), time(NULL)));
* empty label_blk, and nothing will be written.
*/
Dmsg0(190, "write label block to dev\n");
- if (!write_block_to_dev(dcr)) {
+ if (!dcr->write_block_to_dev()) {
berrno be;
- Pmsg1(0, "write_block_to_device Volume label failed. ERR=%s",
- be.strerror(dev->dev_errno));
- free_block(label_blk);
+ Pmsg1(0, _("write_block_to_device Volume label failed. ERR=%s"),
+ be.bstrerror(dev->dev_errno));
+ dev->free_dcr_blocks(dcr);
dcr->block = block;
- unblock_device(dev);
- return false; /* device locked */
+ dcr->ameta_block = ameta_block;
+ dcr->adata_block = adata_block;
+ goto bail_out;
}
- free_block(label_blk);
+ dev->free_dcr_blocks(dcr);
dcr->block = block;
-
- /*
- * Walk through all attached jcrs indicating the volume has changed
- */
- Dmsg1(100, "Walk attached jcrs. Volume=%s\n", dev->VolCatInfo.VolCatName);
-// for (JCR *mjcr=NULL; (mjcr=next_attached_jcr(dev, mjcr)); ) {
- DCR *mdcr;
- foreach_dlist(mdcr, dev->attached_dcrs) {
- JCR *mjcr = mdcr->jcr;
- if (mjcr->JobId == 0) {
- continue; /* ignore console */
- }
- mdcr->NewVol = true;
- if (jcr != mjcr) {
- bstrncpy(mdcr->VolumeName, dcr->VolumeName, sizeof(mdcr->VolumeName));
- }
- }
+ dcr->ameta_block = ameta_block;
+ dcr->adata_block = adata_block;
/* Clear NewVol now because dir_get_volume_info() already done */
jcr->dcr->NewVol = false;
/* Write overflow block to device */
Dmsg0(190, "Write overflow block to dev\n");
- if (!write_block_to_dev(dcr)) {
+ if (save_adata) {
+ dcr->set_adata(); /* try to write block we entered with */
+ }
+ if (!dcr->write_block_to_dev()) {
berrno be;
- Pmsg1(0, "write_block_to_device overflow block failed. ERR=%s",
- be.strerror(dev->dev_errno));
- unblock_device(dev);
- return false; /* device locked */
+ Dmsg1(0, _("write_block_to_device overflow block failed. ERR=%s"),
+ be.bstrerror(dev->dev_errno));
+ /* Note: recursive call */
+ if (retries-- <= 0 || !fixup_device_block_write_error(dcr, retries)) {
+ Jmsg2(jcr, M_FATAL, 0,
+ _("Catastrophic error. Cannot write overflow block to device %s. ERR=%s"),
+ dev->print_name(), be.bstrerror(dev->dev_errno));
+ goto bail_out;
+ }
}
+ ok = true;
+bail_out:
+ if (save_adata) {
+ dcr->set_ameta(); /* Do unblock ... on ameta */
+ }
+ /*
+ * At this point, the device is locked and blocked.
+ * Unblock the device, restore any entry blocked condition, then
+ * return leaving the device locked (as it was on entry).
+ */
unblock_device(dev);
- return true; /* device locked */
+ if (blocked != BST_NOT_BLOCKED) {
+ block_device(dev, blocked);
+ }
+ if (save_adata) {
+ dcr->set_adata(); /* switch back to what we entered with */
+ }
+ return ok; /* device locked */
+}
+
+void set_start_vol_position(DCR *dcr)
+{
+ DEVICE *dev = dcr->dev;
+ /* Set new start position */
+ if (dev->is_tape()) {
+ dcr->StartAddr = dcr->EndAddr = dev->get_full_addr();
+ } else {
+ if (dev->adata) {
+ dev = dcr->ameta_dev;
+ }
+ /*
+ * Note: we only update the DCR values for ameta blocks
+ * because all the indexing (JobMedia) is done with
+ * ameta blocks/records, which may point to adata.
+ */
+ dcr->StartAddr = dcr->EndAddr = dev->get_full_addr();
+ }
}
/*
void set_new_volume_parameters(DCR *dcr)
{
JCR *jcr = dcr->jcr;
- DEVICE *dev = dcr->dev;
- if (dcr->NewVol && !dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE)) {
- Jmsg1(jcr, M_ERROR, 0, "%s", jcr->errmsg);
- }
- /* Set new start/end positions */
- if (dev_state(dev, ST_TAPE)) {
- dcr->StartBlock = dev->block_num;
- dcr->StartFile = dev->file;
- } else {
- dcr->StartBlock = (uint32_t)dev->file_addr;
- dcr->StartFile = (uint32_t)(dev->file_addr >> 32);
+ Dmsg1(40, "set_new_volume_parameters dev=%s\n", dcr->dev->print_name());
+ if (dcr->NewVol) {
+ while (dcr->VolumeName[0] == 0) {
+ int retries = 5;
+ wait_for_device(dcr, retries);
+ }
+ if (dir_get_volume_info(dcr, dcr->VolumeName, GET_VOL_INFO_FOR_WRITE)) {
+ dcr->dev->clear_wait();
+ } else {
+ Dmsg1(40, "getvolinfo failed. No new Vol: %s", jcr->errmsg);
+ }
}
- /* Reset indicies */
- dcr->VolFirstIndex = 0;
- dcr->VolLastIndex = 0;
- jcr->NumVolumes++;
+ set_new_file_parameters(dcr);
+ jcr->NumWriteVolumes++;
dcr->NewVol = false;
- dcr->WroteVol = false;
}
/*
*/
void set_new_file_parameters(DCR *dcr)
{
- DEVICE *dev = dcr->dev;
+ set_start_vol_position(dcr);
- /* Set new start/end positions */
- if (dev_state(dev, ST_TAPE)) {
- dcr->StartBlock = dev->block_num;
- dcr->StartFile = dev->file;
- } else {
- dcr->StartBlock = (uint32_t)dev->file_addr;
- dcr->StartFile = (uint32_t)(dev->file_addr >> 32);
- }
/* Reset indicies */
+ Dmsg3(1000, "Reset indices Vol=%s were: FI=%d LI=%d\n", dcr->VolumeName,
+ dcr->VolFirstIndex, dcr->VolLastIndex);
dcr->VolFirstIndex = 0;
dcr->VolLastIndex = 0;
dcr->NewFile = false;
* Returns: false on failure
* true on success
*/
-bool first_open_device(DEVICE *dev)
+bool first_open_device(DCR *dcr)
{
+ DEVICE *dev = dcr->dev;
+ bool ok = true;
+
Dmsg0(120, "start open_output_device()\n");
if (!dev) {
return false;
}
- lock_device(dev);
+ dev->rLock(false);
/* Defer opening files */
if (!dev->is_tape()) {
Dmsg0(129, "Device is file, deferring open.\n");
- unlock_device(dev);
- return true;
+ goto bail_out;
}
- int mode;
- if (dev_cap(dev, CAP_STREAM)) {
- mode = OPEN_WRITE_ONLY;
- } else {
- mode = OPEN_READ_WRITE;
- }
Dmsg0(129, "Opening device.\n");
- dev->open_nowait = true;
- if (open_dev(dev, NULL, mode) < 0) {
- Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
- dev->open_nowait = false;
- unlock_device(dev);
- return false;
- }
- Dmsg1(129, "open_dev %s OK\n", dev->print_name());
- dev->open_nowait = false;
- unlock_device(dev);
- return true;
-}
-
-/*
- * Make sure device is open, if not do so
- */
-bool open_device(DCR *dcr)
-{
- DEVICE *dev = dcr->dev;
- /* Open device */
- int mode;
- if (dev_cap(dev, CAP_STREAM)) {
- mode = OPEN_WRITE_ONLY;
- } else {
- mode = OPEN_READ_WRITE;
- }
- if (open_dev(dev, dcr->VolCatInfo.VolCatName, mode) < 0) {
- /* If polling, ignore the error */
- if (!dev->poll) {
- Jmsg2(dcr->jcr, M_FATAL, 0, _("Unable to open device %s: ERR=%s\n"),
- dev->print_name(), strerror_dev(dev));
- Pmsg2(000, "Unable to open archive %s: ERR=%s\n",
- dev->print_name(), strerror_dev(dev));
- }
- return false;
- }
- return true;
-}
-
-void dev_lock(DEVICE *dev)
-{
- int errstat;
- if ((errstat=rwl_writelock(&dev->lock))) {
- Emsg1(M_ABORT, 0, "Device write lock failure. ERR=%s\n", strerror(errstat));
- }
-}
-
-void dev_unlock(DEVICE *dev)
-{
- int errstat;
- if ((errstat=rwl_writeunlock(&dev->lock))) {
- Emsg1(M_ABORT, 0, "Device write unlock failure. ERR=%s\n", strerror(errstat));
- }
-}
-
-/*
- * When dev_blocked is set, all threads EXCEPT thread with id no_wait_id
- * must wait. The no_wait_id thread is out obtaining a new volume
- * and preparing the label.
- */
-void _lock_device(const char *file, int line, DEVICE *dev)
-{
- int stat;
- Dmsg3(500, "lock %d from %s:%d\n", dev->dev_blocked, file, line);
- P(dev->mutex);
- if (dev->dev_blocked && !pthread_equal(dev->no_wait_id, pthread_self())) {
- dev->num_waiting++; /* indicate that I am waiting */
- while (dev->dev_blocked) {
- if ((stat = pthread_cond_wait(&dev->wait, &dev->mutex)) != 0) {
- V(dev->mutex);
- Emsg1(M_ABORT, 0, _("pthread_cond_wait failure. ERR=%s\n"),
- strerror(stat));
- }
- }
- dev->num_waiting--; /* no longer waiting */
+ if (!dev->open_device(dcr, OPEN_READ_ONLY)) {
+ Jmsg1(NULL, M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
+ ok = false;
+ goto bail_out;
}
-}
+ Dmsg1(129, "open dev %s OK\n", dev->print_name());
-/*
- * Check if the device is blocked or not
- */
-bool device_is_unmounted(DEVICE *dev)
-{
- bool stat;
- int blocked = dev->dev_blocked;
- stat = (blocked == BST_UNMOUNTED) ||
- (blocked == BST_UNMOUNTED_WAITING_FOR_SYSOP);
- return stat;
-}
-
-const char *edit_blocked_reason(DEVICE *dev)
-{
- switch (dev->dev_blocked) {
- case BST_NOT_BLOCKED:
- return "not blocked";
- case BST_UNMOUNTED:
- return "user unmounted device";
- case BST_WAITING_FOR_SYSOP:
- return "waiting for operator action";
- case BST_DOING_ACQUIRE:
- return "opening, validating, or positioning tape";
- case BST_WRITING_LABEL:
- return "labeling tape";
- case BST_UNMOUNTED_WAITING_FOR_SYSOP:
- return "closed by user during mount request";
- case BST_MOUNT:
- return "mount request";
- default:
- return "unknown blocked code";
- }
-}
-
-void _unlock_device(const char *file, int line, DEVICE *dev)
-{
- Dmsg2(500, "unlock from %s:%d\n", file, line);
- V(dev->mutex);
-}
-
-/*
- * Block all other threads from using the device
- * Device must already be locked. After this call,
- * the device is blocked to any thread calling lock_device(),
- * but the device is not locked (i.e. no P on device). Also,
- * the current thread can do slip through the lock_device()
- * calls without blocking.
- */
-void _block_device(const char *file, int line, DEVICE *dev, int state)
-{
- Dmsg3(500, "block set %d from %s:%d\n", state, file, line);
- ASSERT(dev->dev_blocked == BST_NOT_BLOCKED);
- dev->dev_blocked = state; /* make other threads wait */
- dev->no_wait_id = pthread_self(); /* allow us to continue */
-}
-
-
-
-/*
- * Unblock the device, and wake up anyone who went to sleep.
- */
-void _unblock_device(const char *file, int line, DEVICE *dev)
-{
- Dmsg3(500, "unblock %d from %s:%d\n", dev->dev_blocked, file, line);
- ASSERT(dev->dev_blocked);
- dev->dev_blocked = BST_NOT_BLOCKED;
- dev->no_wait_id = 0;
- if (dev->num_waiting > 0) {
- pthread_cond_broadcast(&dev->wait); /* wake them up */
- }
-}
-
-/*
- * Enter with device locked and blocked
- * Exit with device unlocked and blocked by us.
- */
-void _steal_device_lock(const char *file, int line, DEVICE *dev, bsteal_lock_t *hold, int state)
-{
- Dmsg4(500, "steal lock. old=%d new=%d from %s:%d\n", dev->dev_blocked, state,
- file, line);
- hold->dev_blocked = dev->dev_blocked;
- hold->dev_prev_blocked = dev->dev_prev_blocked;
- hold->no_wait_id = dev->no_wait_id;
- dev->dev_blocked = state;
- dev->no_wait_id = pthread_self();
- V(dev->mutex);
-}
-
-/*
- * Enter with device blocked by us but not locked
- * Exit with device locked, and blocked by previous owner
- */
-void _give_back_device_lock(const char *file, int line, DEVICE *dev, bsteal_lock_t *hold)
-{
- Dmsg4(500, "return lock. old=%d new=%d from %s:%d\n",
- dev->dev_blocked, hold->dev_blocked, file, line);
- P(dev->mutex);
- dev->dev_blocked = hold->dev_blocked;
- dev->dev_prev_blocked = hold->dev_prev_blocked;
- dev->no_wait_id = hold->no_wait_id;
- if (dev->dev_blocked == BST_NOT_BLOCKED && dev->num_waiting > 0) {
- pthread_cond_broadcast(&dev->wait); /* wake them up */
- }
+bail_out:
+ dev->rUnlock();
+ return ok;
}
projects / bacula / bacula / blobdiff