/*
*
- * Higher Level Device routines.
- * Knows about Bacula tape labels and such
+ * Higher Level Device routines.
+ * Knows about Bacula tape labels and such
*
* NOTE! In general, subroutines that have the word
* "device" in the name do locking. Subroutines
* yyy_dev(), all is OK, but if xxx_device()
* calls yyy_device(), everything will hang.
* Obviously, no zzz_dev() is allowed to call
- * a www_device() or everything falls apart.
+ * a www_device() or everything falls apart.
*
* Concerning the routines lock_device() and block_device()
* see the end of this module for details. In general,
* blocking a device leaves it in a state where all threads
- * other than the current thread block when they attempt to
+ * other than the current thread block when they attempt to
* lock the device. They remain suspended (blocked) until the device
* is unblocked. So, a device is blocked during an operation
* that takes a long time (initialization, mounting a new
* volume, ...) locking a device is done for an operation
- * that takes a short time such as writing data to the
+ * that takes a short time such as writing data to the
* device.
*
*
* Kern Sibbald, MM, MMI
- *
+ *
* Version $Id$
*/
/*
* Here are a few things to know:
* dcr->VolCatInfo contains the info on the "current" tape for this job.
* dev->VolCatInfo contains the info on the tape in the drive.
- * The tape in the drive could have changed several times since
+ * The tape in the drive could have changed several times since
* the last time the job used it (jcr->VolCatInfo).
* dcr->VolumeName is the name of the current/desired tape in the drive.
*
- * We enter with device locked, and
+ * We enter with device locked, and
* exit with device locked.
*
* Note, we are called only from one place in block.c
unlock_device(dev);
bstrncpy(dev->VolCatInfo.VolCatStatus, "Full", sizeof(dev->VolCatInfo.VolCatStatus));
- Dmsg2(100, "Call update_vol_info Stat=%s Vol=%s\n",
+ Dmsg2(100, "Call update_vol_info Stat=%s Vol=%s\n",
dev->VolCatInfo.VolCatStatus, dev->VolCatInfo.VolCatName);
dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
dcr->block = label_blk;
/* Inform User about end of medium */
- Jmsg(jcr, M_INFO, 0, _("End of medium on Volume \"%s\" Bytes=%s Blocks=%s at %s.\n"),
+ Jmsg(jcr, M_INFO, 0, _("End of medium on Volume \"%s\" Bytes=%s Blocks=%s at %s.\n"),
PrevVolName, edit_uint64_with_commas(dev->VolCatInfo.VolCatBytes, b1),
edit_uint64_with_commas(dev->VolCatInfo.VolCatBlocks, b2),
bstrftime(dt, sizeof(dt), time(NULL)));
Jmsg(jcr, M_INFO, 0, _("New volume \"%s\" mounted on device %s at %s.\n"),
dcr->VolumeName, dev_name(dev), bstrftime(dt, sizeof(dt), time(NULL)));
- /*
+ /*
* If this is a new tape, the label_blk will contain the
* label, so write it now. If this is a previously
* used tape, mount_next_write_volume() will return an
free_block(label_blk);
dcr->block = block;
- /*
- * Walk through all attached jcrs indicating the volume has changed
+ /*
+ * Walk through all attached jcrs indicating the volume has changed
*/
Dmsg1(100, "Walk attached jcrs. Volume=%s\n", dev->VolCatInfo.VolCatName);
// for (JCR *mjcr=NULL; (mjcr=next_attached_jcr(dev, mjcr)); ) {
void set_new_file_parameters(DCR *dcr)
{
DEVICE *dev = dcr->dev;
-
+
/* Set new start/end positions */
if (dev_state(dev, ST_TAPE)) {
dcr->StartBlock = dev->block_num;
/*
- * First Open of the device. Expect dev to already be initialized.
+ * First Open of the device. Expect dev to already be initialized.
*
- * This routine is used only when the Storage daemon starts
+ * This routine is used only when the Storage daemon starts
* and always_open is set, and in the stand-alone utility
* routines such as bextract.
*
* Note, opening of a normal file is deferred to later so
* that we can get the filename; the device_name for
- * a file is the directory only.
+ * a file is the directory only.
*
* Returns: false on failure
* true on success
}
Dmsg0(129, "Opening device.\n");
if (open_dev(dev, NULL, mode) < 0) {
- Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
+ Emsg1(M_FATAL, 0, _("dev open failed: %s\n"), dev->errmsg);
unlock_device(dev);
return false;
}
return true;
}
-/*
- * Make sure device is open, if not do so
+/*
+ * Make sure device is open, if not do so
*/
bool open_device(DCR *dcr)
{
if (open_dev(dev, dcr->VolCatInfo.VolCatName, mode) < 0) {
/* If polling, ignore the error */
if (!dev->poll) {
- Jmsg2(dcr->jcr, M_FATAL, 0, _("Unable to open device %s. ERR=%s\n"),
+ Jmsg2(dcr->jcr, M_FATAL, 0, _("Unable to open device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
}
return false;
}
}
-/*
+/*
* When dev_blocked is set, all threads EXCEPT thread with id no_wait_id
* must wait. The no_wait_id thread is out obtaining a new volume
* and preparing the label.
while (dev->dev_blocked) {
if ((stat = pthread_cond_wait(&dev->wait, &dev->mutex)) != 0) {
V(dev->mutex);
- Emsg1(M_ABORT, 0, _("pthread_cond_wait failure. ERR=%s\n"),
+ Emsg1(M_ABORT, 0, _("pthread_cond_wait failure. ERR=%s\n"),
strerror(stat));
}
}
case BST_UNMOUNTED:
return "user unmounted device";
case BST_WAITING_FOR_SYSOP:
- return "waiting for operator action";
+ return "waiting for operator action";
case BST_DOING_ACQUIRE:
return "opening, validating, or positioning tape";
case BST_WRITING_LABEL:
}
}
-void _unlock_device(const char *file, int line, DEVICE *dev)
+void _unlock_device(const char *file, int line, DEVICE *dev)
{
Dmsg2(500, "unlock from %s:%d\n", file, line);
V(dev->mutex);
}
-/*
+/*
* Block all other threads from using the device
* Device must already be locked. After this call,
* the device is blocked to any thread calling lock_device(),
/*
* Enter with device blocked by us but not locked
- * Exit with device locked, and blocked by previous owner
+ * Exit with device locked, and blocked by previous owner
*/
-void _give_back_device_lock(const char *file, int line, DEVICE *dev, bsteal_lock_t *hold)
+void _give_back_device_lock(const char *file, int line, DEVICE *dev, bsteal_lock_t *hold)
{
- Dmsg4(500, "return lock. old=%d new=%d from %s:%d\n",
+ Dmsg4(500, "return lock. old=%d new=%d from %s:%d\n",
dev->dev_blocked, hold->dev_blocked, file, line);
P(dev->mutex);
dev->dev_blocked = hold->dev_blocked;
projects / bacula / bacula / blobdiff