/*
Bacula® - The Network Backup Solution
- Copyright (C) 2001-2009 Free Software Foundation Europe e.V.
+ Copyright (C) 2001-2010 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
+ modify it under the terms of version three of the GNU Affero General Public
License as published by the Free Software Foundation and included
in the file LICENSE.
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Affero General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
*
* Kern Sibbald, May MMI
*
- * Version $Id$
- *
*/
#include "bacula.h"
extern bool init_done;
/* Static variables */
-static char derrmsg[] = "3900 Invalid command\n";
+static char derrmsg[] = "3900 Invalid command:";
static char OKsetdebug[] = "3000 OK setdebug=%d\n";
static char invalid_cmd[] = "3997 Invalid command for a Director with Monitor directive enabled.\n";
static char OK_bootstrap[] = "3000 OK bootstrap\n";
static bool cancel_cmd(JCR *cjcr);
static bool mount_cmd(JCR *jcr);
static bool unmount_cmd(JCR *jcr);
-static bool action_on_purge_cmd(JCR *jcr);
+//static bool action_on_purge_cmd(JCR *jcr);
static bool bootstrap_cmd(JCR *jcr);
static bool changer_cmd(JCR *sjcr);
static bool do_label(JCR *jcr, int relabel);
{"status", status_cmd, 1},
{".status", qstatus_cmd, 1},
{"unmount", unmount_cmd, 0},
- {"action_on_purge", action_on_purge_cmd, 0},
+// {"action_on_purge", action_on_purge_cmd, 0},
{"use storage=", use_cmd, 0},
{"run", run_cmd, 0},
// {"query", query_cmd, 0},
Dmsg1(200, "Do command: %s\n", cmds[i].cmd);
if (!cmds[i].func(jcr)) { /* do command */
quit = true; /* error, get out */
- Dmsg1(190, "Command %s reqeusts quit\n", cmds[i].cmd);
+ Dmsg1(190, "Command %s requests quit\n", cmds[i].cmd);
}
found = true; /* indicate command found */
break;
}
}
if (!found) { /* command not found */
- bs->fsend(derrmsg);
+ POOL_MEM err_msg;
+ Mmsg(err_msg, "%s %s\n", derrmsg, bs->msg);
+ bs->fsend(err_msg.c_str());
break;
}
}
dequeue_messages(jcr); /* send any queued messages */
bs->signal(BNET_TERMINATE);
free_jcr(jcr);
- /* ***FIXME*** remove for production */
- sm_check(__FILE__, __LINE__, true);
return NULL;
}
} else {
oldStatus = jcr->JobStatus;
set_jcr_job_status(jcr, JS_Canceled);
+ Dmsg2(800, "Cancel JobId=%d %p\n", jcr->JobId, jcr);
if (!jcr->authenticated && oldStatus == JS_WaitFD) {
pthread_cond_signal(&jcr->job_start_wait); /* wake waiting thread */
}
if (jcr->file_bsock) {
- bnet_sig(jcr->file_bsock, BNET_TERMINATE);
+ jcr->file_bsock->signal(BNET_TERMINATE);
+ jcr->file_bsock->set_terminated();
+ Dmsg2(800, "Term bsock jid=%d %p\n", jcr->JobId, jcr);
} else {
/* Still waiting for FD to connect, release it */
pthread_cond_signal(&jcr->job_start_wait); /* wake waiting job */
+ Dmsg2(800, "Signal FD connect jid=%d %p\n", jcr->JobId, jcr);
}
/* If thread waiting on mount, wake him */
if (jcr->dcr && jcr->dcr->dev && jcr->dcr->dev->waiting_for_mount()) {
dev->truncating = true; /* let open() know we will truncate it */
}
/* Set old volume name for open if relabeling */
- bstrncpy(dcr->VolCatInfo.VolCatName, volname, sizeof(dcr->VolCatInfo.VolCatName));
+ dcr->setVolCatName(volname);
if (dev->open(dcr, mode) < 0) {
- dir->fsend(_("3910 Unable to open device %s: ERR=%s\n"),
+ dir->fsend(_("3910 Unable to open device \"%s\": ERR=%s\n"),
dev->print_name(), dev->bstrerror());
goto bail_out;
}
label_status = read_dev_volume_label(dcr);
/* Set new volume name */
- bstrncpy(dcr->VolCatInfo.VolCatName, newname, sizeof(dcr->VolCatInfo.VolCatName));
+ dcr->setVolCatName(newname);
switch(label_status) {
case VOL_NAME_ERROR:
case VOL_VERSION_ERROR:
ok = true;
break;
default:
- dir->fsend(_("3902 Cannot mount Volume on Storage Device %s because:\n%s"),
+ dir->fsend(_("3902 Cannot mount Volume on Storage Device \"%s\" because:\n%s"),
dev->print_name(), jcr->errmsg);
ok = false;
break;
}
/* We freed the device, so reopen it and wake any waiting threads */
if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
- dir->fsend(_("3901 Unable to open device %s: ERR=%s\n"),
+ dir->fsend(_("3901 Unable to open device \"%s\": ERR=%s\n"),
dev->print_name(), dev->bstrerror());
if (dev->blocked() == BST_UNMOUNTED) {
/* We blocked the device, so unblock it */
dev->set_blocked(BST_MOUNT);
}
if (dev->is_labeled()) {
- dir->fsend(_("3001 Device %s is mounted with Volume \"%s\"\n"),
+ dir->fsend(_("3001 Device \"%s\" is mounted with Volume \"%s\"\n"),
dev->print_name(), dev->VolHdr.VolumeName);
} else {
- dir->fsend(_("3905 Device %s open but no Bacula volume is mounted.\n"
+ dir->fsend(_("3905 Device \"%s\" open but no Bacula volume is mounted.\n"
"If this is not a blank tape, try unmounting and remounting the Volume.\n"),
dev->print_name());
}
break;
case BST_DOING_ACQUIRE:
- dir->fsend(_("3001 Device %s is doing acquire.\n"),
+ dir->fsend(_("3001 Device \"%s\" is doing acquire.\n"),
dev->print_name());
break;
case BST_WRITING_LABEL:
- dir->fsend(_("3903 Device %s is being labeled.\n"),
+ dir->fsend(_("3903 Device \"%s\" is being labeled.\n"),
dev->print_name());
break;
}
if (dev->is_open()) {
if (dev->is_labeled()) {
- dir->fsend(_("3001 Device %s is mounted with Volume \"%s\"\n"),
+ dir->fsend(_("3001 Device \"%s\" is mounted with Volume \"%s\"\n"),
dev->print_name(), dev->VolHdr.VolumeName);
} else {
- dir->fsend(_("3905 Device %s open but no Bacula volume is mounted.\n"
+ dir->fsend(_("3905 Device \"%s\" open but no Bacula volume is mounted.\n"
"If this is not a blank tape, try unmounting and remounting the Volume.\n"),
dev->print_name());
}
} else if (dev->is_tape()) {
if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
- dir->fsend(_("3901 Unable to open device %s: ERR=%s\n"),
+ dir->fsend(_("3901 Unable to open device \"%s\": ERR=%s\n"),
dev->print_name(), dev->bstrerror());
break;
}
read_label(dcr);
if (dev->is_labeled()) {
- dir->fsend(_("3001 Device %s is already mounted with Volume \"%s\"\n"),
+ dir->fsend(_("3001 Device \"%s\" is already mounted with Volume \"%s\"\n"),
dev->print_name(), dev->VolHdr.VolumeName);
} else {
- dir->fsend(_("3905 Device %s open but no Bacula volume is mounted.\n"
+ dir->fsend(_("3905 Device \"%s\" open but no Bacula volume is mounted.\n"
"If this is not a blank tape, try unmounting and remounting the Volume.\n"),
dev->print_name());
}
} else if (dev->is_unmountable()) {
if (dev->mount(1)) {
- dir->fsend(_("3002 Device %s is mounted.\n"),
- dev->print_name());
+ dir->fsend(_("3002 Device \"%s\" is mounted.\n"), dev->print_name());
} else {
dir->fsend(_("3907 %s"), dev->bstrerror());
}
} else { /* must be file */
- dir->fsend(_("3906 File device %s is always mounted.\n"),
+ dir->fsend(_("3906 File device \"%s\" is always mounted.\n"),
dev->print_name());
+ pthread_cond_broadcast(&dev->wait_next_vol);
+ Dmsg1(100, "JobId=%u broadcast wait_device_release\n", (uint32_t)dcr->jcr->JobId);
+ pthread_cond_broadcast(&wait_device_release);
}
break;
+ case BST_RELEASING:
+ dir->fsend(_("3930 Device \"%s\" is being released.\n"), dev->print_name());
+ break;
+
default:
- dir->fsend(_("3905 Bizarre wait state %d\n"), dev->blocked());
+ dir->fsend(_("3905 Unknown wait state %d\n"), dev->blocked());
break;
}
dev->dunlock();
}
if (dev->is_unmountable()) {
if (dev->unmount(0)) {
- dir->fsend(_("3002 Device %s unmounted.\n"),
+ dir->fsend(_("3002 Device \"%s\" unmounted.\n"),
dev->print_name());
} else {
dir->fsend(_("3907 %s"), dev->bstrerror());
}
} else {
Dmsg0(90, "Device already unmounted\n");
- dir->fsend(_("3901 Device %s is already unmounted.\n"),
+ dir->fsend(_("3901 Device \"%s\" is already unmounted.\n"),
dev->print_name());
}
} else if (dev->blocked() == BST_WAITING_FOR_SYSOP) {
dir->fsend(_("3907 %s"), dev->bstrerror());
} else {
dev->set_blocked(BST_UNMOUNTED_WAITING_FOR_SYSOP);
- dir->fsend(_("3001 Device %s unmounted.\n"),
+ dir->fsend(_("3001 Device \"%s\" unmounted.\n"),
dev->print_name());
}
} else if (dev->blocked() == BST_DOING_ACQUIRE) {
- dir->fsend(_("3902 Device %s is busy in acquire.\n"),
+ dir->fsend(_("3902 Device \"%s\" is busy in acquire.\n"),
dev->print_name());
} else if (dev->blocked() == BST_WRITING_LABEL) {
- dir->fsend(_("3903 Device %s is being labeled.\n"),
+ dir->fsend(_("3903 Device \"%s\" is being labeled.\n"),
dev->print_name());
} else if (dev->is_busy()) {
if (dev->is_unmountable() && !dev->unmount(0)) {
dir->fsend(_("3907 %s"), dev->bstrerror());
} else {
- dir->fsend(_("3002 Device %s unmounted.\n"),
+ dir->fsend(_("3002 Device \"%s\" unmounted.\n"),
dev->print_name());
}
}
return true;
}
+#if 0
/*
* The truncate command will recycle a volume. The director can call this
* after purging a volume so that disk space will not be wasted. Only useful
* for File Storage, of course.
*
+ *
+ * It is currently disabled
*/
static bool action_on_purge_cmd(JCR *jcr)
{
- POOL_MEM devname;
- POOL_MEM volumename;
BSOCK *dir = jcr->dir_bsock;
- DEVICE *dev;
- DCR *dcr;
+
+ char devname[MAX_NAME_LENGTH];
+ char volumename[MAX_NAME_LENGTH];
int action;
- if (sscanf(dir->msg, "action_on_purge %127s vol=%s action=%d",
- devname.c_str(), volumename.c_str(), &action) != 3) {
+ /* TODO: Need to find a free device and ask for slot to the director */
+ if (sscanf(dir->msg,
+ "action_on_purge %127s vol=%127s action=%d",
+ devname, volumename, &action)!= 5)
+ {
dir->fsend(_("3916 Error scanning action_on_purge command\n"));
goto done;
}
- unbash_spaces(volumename.c_str());
-
- /* FIXME: autochanger, drive = 0? how can we avoid that? we only work on
- * files
- */
- if ((dcr = find_device(jcr, devname, 0)) == NULL) {
- dir->fsend(_("3999 Device \"%s\" not found or could not be opened.\n"), devname.c_str());
- goto done;
- }
-
- dev = dcr->dev;
+ unbash_spaces(volumename);
+ unbash_spaces(devname);
- /* Store the VolumeName for opening and re-labeling the volume */
- bstrncpy(dcr->VolumeName, volumename.c_str(), sizeof(dcr->VolumeName));
- bstrncpy(dev->VolHdr.VolumeName, volumename.c_str(), sizeof(dev->VolHdr.VolumeName));
+ /* Check if action is correct */
+ if (action & AOP_TRUNCTATE) {
- /* Re-write the label with the recycle flag */
- if (rewrite_volume_label(dcr, true)) {
- dir->fsend(_("3917 Volume recycled\n"));
- } else {
- dir->fsend(_("3918 Recycle failed\n"));
- }
+ }
+ /* ... */
done:
dir->signal(BNET_EOD);
return true;
}
+#endif
/*
* Release command from Director. This rewinds the device and if
unload_autochanger(dcr, -1);
}
Dmsg0(90, "Device already released\n");
- dir->fsend(_("3921 Device %s already released.\n"),
+ dir->fsend(_("3921 Device \"%s\" already released.\n"),
dev->print_name());
} else if (dev->blocked() == BST_WAITING_FOR_SYSOP) {
Dmsg2(90, "%d waiter dev_block=%d.\n", dev->num_waiting,
dev->blocked());
unload_autochanger(dcr, -1);
- dir->fsend(_("3922 Device %s waiting for sysop.\n"),
+ dir->fsend(_("3922 Device \"%s\" waiting for sysop.\n"),
dev->print_name());
} else if (dev->blocked() == BST_UNMOUNTED_WAITING_FOR_SYSOP) {
Dmsg2(90, "%d waiter dev_block=%d. doing unmount\n", dev->num_waiting,
dev->blocked());
- dir->fsend(_("3922 Device %s waiting for mount.\n"),
+ dir->fsend(_("3922 Device \"%s\" waiting for mount.\n"),
dev->print_name());
} else if (dev->blocked() == BST_DOING_ACQUIRE) {
- dir->fsend(_("3923 Device %s is busy in acquire.\n"),
+ dir->fsend(_("3923 Device \"%s\" is busy in acquire.\n"),
dev->print_name());
} else if (dev->blocked() == BST_WRITING_LABEL) {
- dir->fsend(_("3914 Device %s is being labeled.\n"),
+ dir->fsend(_("3914 Device \"%s\" is being labeled.\n"),
dev->print_name());
} else if (dev->is_busy()) {
} else { /* device not being used */
Dmsg0(90, "Device not in use, releasing\n");
dcr->release_volume();
- dir->fsend(_("3022 Device %s released.\n"),
+ dir->fsend(_("3022 Device \"%s\" released.\n"),
dev->print_name());
}
dev->dunlock();
dev = dcr->dev;
dev->dlock(); /* Use P to avoid indefinite block */
if (!dev->device->changer_res) {
- dir->fsend(_("3995 Device %s is not an autochanger.\n"),
+ dir->fsend(_("3995 Device \"%s\" is not an autochanger.\n"),
dev->print_name());
/* Under certain "safe" conditions, we can steal the lock */
} else if (safe_cmd || !dev->is_open() || dev->can_steal_lock()) {
Dmsg1(100, "Volume: %s\n", dev->VolHdr.VolumeName);
break;
default:
- dir->fsend(_("3902 Cannot mount Volume on Storage Device %s because:\n%s"),
+ dir->fsend(_("3902 Cannot mount Volume on Storage Device \"%s\" because:\n%s"),
dev->print_name(), jcr->errmsg);
break;
}
if (dev->is_blocked()) {
switch (dev->blocked()) {
case BST_UNMOUNTED:
- dir->fsend(_("3931 Device %s is BLOCKED. user unmounted.\n"),
+ dir->fsend(_("3931 Device \"%s\" is BLOCKED. user unmounted.\n"),
dev->print_name());
break;
case BST_UNMOUNTED_WAITING_FOR_SYSOP:
- dir->fsend(_("3932 Device %s is BLOCKED. user unmounted during wait for media/mount.\n"),
+ dir->fsend(_("3932 Device \"%s\" is BLOCKED. user unmounted during wait for media/mount.\n"),
dev->print_name());
break;
case BST_WAITING_FOR_SYSOP:
- dir->fsend(_("3933 Device %s is BLOCKED waiting for media.\n"),
+ dir->fsend(_("3933 Device \"%s\" is BLOCKED waiting for media.\n"),
dev->print_name());
break;
case BST_DOING_ACQUIRE:
- dir->fsend(_("3934 Device %s is being initialized.\n"),
+ dir->fsend(_("3934 Device \"%s\" is being initialized.\n"),
dev->print_name());
break;
case BST_WRITING_LABEL:
- dir->fsend(_("3935 Device %s is blocked labeling a Volume.\n"),
+ dir->fsend(_("3935 Device \"%s\" is blocked labeling a Volume.\n"),
dev->print_name());
break;
default:
- dir->fsend(_("3935 Device %s is blocked for unknown reason.\n"),
+ dir->fsend(_("3935 Device \"%s\" is blocked for unknown reason.\n"),
dev->print_name());
break;
}
} else if (dev->can_read()) {
- dir->fsend(_("3936 Device %s is busy reading.\n"),
+ dir->fsend(_("3936 Device \"%s\" is busy reading.\n"),
dev->print_name());;
} else {
- dir->fsend(_("3937 Device %s is busy with %d writer(s).\n"),
+ dir->fsend(_("3937 Device \"%s\" is busy with %d writer(s).\n"),
dev->print_name(), dev->num_writers);
}
}