/*
Bacula® - The Network Backup Solution
- Copyright (C) 2006-2008 Free Software Foundation Europe e.V.
+ Copyright (C) 2006-2010 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
+ modify it under the terms of version three of the GNU Affero General Public
License as published by the Free Software Foundation and included
in the file LICENSE.
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Affero General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
*
* Kern Sibbald, January MMVI
*
- * Version $Id$
*/
#include "bacula.h"
char ec1[50];
DEVICE *dev;
- switch(jcr->get_JobType()) {
+ switch(jcr->getJobType()) {
case JT_MIGRATE:
Type = "Migration";
break;
}
Dmsg2(100, "read_dcr=%p write_dcr=%p\n", jcr->read_dcr, jcr->dcr);
-
- create_restore_volume_list(jcr);
if (jcr->NumReadVolumes == 0) {
Jmsg(jcr, M_FATAL, 0, _("No Volume names found for %s.\n"), Type);
goto bail_out;
jcr->run_time = time(NULL);
set_start_vol_position(jcr->dcr);
+ jcr->JobFiles = 0;
ok = read_records(jcr->read_dcr, record_cb, mount_next_read_volume);
goto ok_out;
if (!ok) {
discard_data_spool(jcr->dcr);
} else {
- /* Note: if commit is OK, the device will remain locked */
+ /* Note: if commit is OK, the device will remain blocked */
commit_data_spool(jcr->dcr);
}
}
}
- free_restore_volume_list(jcr);
-
dir_send_job_status(jcr); /* update director */
-
Dmsg0(30, "Done reading.\n");
jcr->end_time = time(NULL);
dequeue_messages(jcr); /* send any queued messages */
}
generate_daemon_event(jcr, "JobEnd");
dir->fsend(Job_end, jcr->Job, jcr->JobStatus, jcr->JobFiles,
- edit_uint64(jcr->JobBytes, ec1));
+ edit_uint64(jcr->JobBytes, ec1), jcr->JobErrors);
Dmsg4(100, Job_end, jcr->Job, jcr->JobStatus, jcr->JobFiles, ec1);
dir->signal(BNET_EOD); /* send EOD to Director daemon */
JCR *jcr = dcr->jcr;
DEVICE *dev = jcr->dcr->dev;
char buf1[100], buf2[100];
- int32_t stream;
- uint32_t last_VolSessionId = 0;
- uint32_t last_VolSessionTime = 0;
- int32_t last_FileIndex = 0;
+#ifdef xxx
+ Dmsg5(000, "on entry JobId=%d FI=%s SessId=%d Strm=%s len=%d\n",
+ jcr->JobId,
+ FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId,
+ stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
+#endif
/* If label and not for us, discard it */
if (rec->FileIndex < 0 && rec->match_stat <= 0) {
return true;
case EOM_LABEL:
return true; /* don't write vol labels */
}
- /*
- * For normal migration jobs, FileIndex values are sequential because
- * we are dealing with one job. However, for Vbackup (consolidation),
- * we will be getting records from multiple jobs and writing them back
- * out, so we need to ensure that the output FileIndex is sequential.
- * We do so by detecting a FileIndex change and incrementing the
- * JobFiles, which we then use as the output FileIndex.
- */
- if (rec->VolSessionId != last_VolSessionId ||
- rec->VolSessionTime != last_VolSessionTime ||
- (rec->FileIndex > 0 && rec->FileIndex != last_FileIndex)) {
- jcr->JobFiles++;
- last_VolSessionId = rec->VolSessionId;
- last_VolSessionTime = rec->VolSessionTime;
- last_FileIndex = rec->FileIndex;
- rec->FileIndex = jcr->JobFiles; /* set sequential output FileIndex */
- }
+// if (jcr->getJobType() == JT_BACKUP) {
+ /*
+ * For normal migration jobs, FileIndex values are sequential because
+ * we are dealing with one job. However, for Vbackup (consolidation),
+ * we will be getting records from multiple jobs and writing them back
+ * out, so we need to ensure that the output FileIndex is sequential.
+ * We do so by detecting a FileIndex change and incrementing the
+ * JobFiles, which we then use as the output FileIndex.
+ */
+ if (rec->FileIndex >= 0) {
+ /* If something changed, increment FileIndex */
+ if (rec->VolSessionId != rec->last_VolSessionId ||
+ rec->VolSessionTime != rec->last_VolSessionTime ||
+ rec->FileIndex != rec->last_FileIndex) {
+ jcr->JobFiles++;
+ rec->last_VolSessionId = rec->VolSessionId;
+ rec->last_VolSessionTime = rec->VolSessionTime;
+ rec->last_FileIndex = rec->FileIndex;
+ }
+ rec->FileIndex = jcr->JobFiles; /* set sequential output FileIndex */
+ }
+// }
/*
* Modify record SessionId and SessionTime to correspond to
* output.
*/
rec->VolSessionId = jcr->VolSessionId;
rec->VolSessionTime = jcr->VolSessionTime;
- Dmsg5(200, "before write_rec JobId=%d FI=%s SessId=%d Strm=%s len=%d\n",
+ Dmsg5(200, "before write JobId=%d FI=%s SessId=%d Strm=%s len=%d\n",
jcr->JobId,
FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId,
- stream_to_ascii(buf1, rec->Stream,rec->FileIndex), rec->data_len);
-
+ stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
while (!write_record_to_block(jcr->dcr->block, rec)) {
Dmsg4(200, "!write_record_to_block blkpos=%u:%u len=%d rem=%d\n",
dev->file, dev->block_num, rec->data_len, rec->remainder);
}
Dmsg2(200, "===== Wrote block new pos %u:%u\n", dev->file, dev->block_num);
}
- jcr->JobBytes += rec->data_len; /* increment bytes this job */
- if (rec->FileIndex <= 0) {
+ /* Restore packet */
+ rec->VolSessionId = rec->last_VolSessionId;
+ rec->VolSessionTime = rec->last_VolSessionTime;
+ if (rec->FileIndex < 0) {
return true; /* don't send LABELs to Dir */
}
+ jcr->JobBytes += rec->data_len; /* increment bytes this job */
Dmsg5(500, "wrote_record JobId=%d FI=%s SessId=%d Strm=%s len=%d\n",
jcr->JobId,
FI_to_ascii(buf1, rec->FileIndex), rec->VolSessionId,
stream_to_ascii(buf2, rec->Stream, rec->FileIndex), rec->data_len);
- /* Send attributes and digest to Director for Catalog */
- stream = rec->Stream;
- if (stream == STREAM_UNIX_ATTRIBUTES || stream == STREAM_UNIX_ATTRIBUTES_EX ||
- crypto_digest_stream_type(stream) != CRYPTO_DIGEST_NONE) {
- if (!jcr->no_attributes) {
- BSOCK *dir = jcr->dir_bsock;
- if (are_attributes_spooled(jcr)) {
- dir->set_spooling();
- }
- Dmsg0(850, "Send attributes to dir.\n");
- if (!dir_update_file_attributes(jcr->dcr, rec)) {
- dir->clear_spooling();
- Jmsg(jcr, M_FATAL, 0, _("Error updating file attributes. ERR=%s\n"),
- dir->bstrerror());
- return false;
- }
- dir->clear_spooling();
- }
- }
+ send_attrs_to_dir(jcr, rec);
return true;
}