* Version $Id$
*/
/*
- Copyright (C) 2000, 2001, 2002 Kern Sibbald and John Walker
+ Copyright (C) 2000-2003 Kern Sibbald and John Walker
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
#include "stored.h" /* pull in Storage Deamon headers */
/* Forward referenced functions */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd);
/*
mount_next_vol:
if (retry++ > 5) {
- Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"), dev_name(dev));
+ Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
+ dev_name(dev));
return 0;
}
- if (job_cancelled(jcr)) {
- Jmsg(jcr, M_FATAL, 0, _("Job cancelled.\n"));
+ if (job_canceled(jcr)) {
+ Jmsg(jcr, M_FATAL, 0, _("Job canceled.\n"));
return 0;
}
recycle = ask = autochanger = 0;
/*
* First erase all memory of the current volume
*/
- dev->block_num = 0;
- dev->file = 0;
- dev->LastBlockNumWritten = 0;
+ dev->block_num = dev->file = 0;
+ dev->EndBlock = dev->EndFile = 0;
memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
memset(&jcr->VolCatInfo, 0, sizeof(jcr->VolCatInfo));
memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
dev->state &= ~ST_LABEL; /* label not yet read */
jcr->VolumeName[0] = 0;
- if (!dev_is_tape(dev) || !(dev->capabilities & CAP_ALWAYSOPEN)) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
+ if (!dev_is_tape(dev) || !dev_cap(dev, CAP_ALWAYSOPEN)) {
+ if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
offline_dev(dev);
}
close_dev(dev);
/* If we have not closed the device, then at least rewind the tape */
if (dev->state & ST_OPENED) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
+ if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
offline_dev(dev);
}
if (!rewind_dev(dev)) {
Dmsg0(100, "did not find next volume. Must ask.\n");
}
Dmsg2(100, "After find_next_append. Vol=%s Slot=%d\n",
- jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
+ jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
release = 1; /* release if we "recurse" */
/*
jcr->VolFirstFile = jcr->JobFiles; /* first update of Vol FileIndex */
for ( ;; ) {
+ int vol_label_status;
autochanger = autoload_device(jcr, dev, 1, NULL);
if (autochanger) {
ask = 0; /* if autochange no need to ask sysop */
/* Open device */
for ( ; !(dev->state & ST_OPENED); ) {
- if (open_dev(dev, jcr->VolCatInfo.VolCatName, READ_WRITE) < 0) {
- if (dev->dev_errno == EAGAIN || dev->dev_errno == EBUSY) {
- sleep(30);
- }
+ int mode;
+ if (dev_cap(dev, CAP_STREAM)) {
+ mode = OPEN_WRITE_ONLY;
+ } else {
+ mode = OPEN_READ_WRITE;
+ }
+ if (open_dev(dev, jcr->VolCatInfo.VolCatName, mode) < 0) {
Jmsg2(jcr, M_FATAL, 0, _("Unable to open device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
return 0;
* Now make sure we have the right tape mounted
*/
read_volume:
- switch (read_dev_volume_label(jcr, dev, block)) {
+ /*
+ * If we are writing to a stream device, ASSUME the volume label
+ * is correct.
+ */
+ if (dev_cap(dev, CAP_STREAM)) {
+ vol_label_status = VOL_OK;
+ create_volume_label(dev, jcr->VolumeName);
+ dev->VolHdr.LabelType = PRE_LABEL;
+ } else {
+ vol_label_status = read_dev_volume_label(jcr, dev, block);
+ }
+ switch (vol_label_status) {
case VOL_OK:
Dmsg1(100, "Vol OK name=%s\n", jcr->VolumeName);
memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
*/
memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
/* Check if this is a valid Volume in the pool */
- strcpy(jcr->VolumeName, dev->VolHdr.VolName);
+ bstrncpy(jcr->VolumeName, dev->VolHdr.VolName, sizeof(jcr->VolumeName));
if (!dir_get_volume_info(jcr, 1)) {
- Mmsg(&jcr->errmsg, _("Wanted Volume \"%s\".\n\
- Actual Volume \"%s\" not acceptable.\n"),
- dev->VolCatInfo.VolCatName, dev->VolHdr.VolName);
+ Mmsg(&jcr->errmsg, _("Wanted Volume \"%s\".\n"
+ " Actual Volume \"%s\" not acceptable because:\n"
+ " %s"),
+ dev->VolCatInfo.VolCatName, dev->VolHdr.VolName,
+ jcr->dir_bsock->msg);
/* Restore desired volume name, note device info out of sync */
memcpy(&jcr->VolCatInfo, &dev->VolCatInfo, sizeof(jcr->VolCatInfo));
goto mount_error;
case VOL_IO_ERROR:
Dmsg1(500, "Vol NO_LABEL or IO_ERROR name=%s\n", jcr->VolumeName);
/* If permitted, create a label */
- if (dev->capabilities & CAP_LABEL) {
+ if (dev_cap(dev, CAP_LABEL)) {
Dmsg0(100, "Create volume label\n");
if (!write_volume_label_to_dev(jcr, (DEVRES *)dev->device, jcr->VolumeName,
jcr->pool_name)) {
Dmsg0(100, "!write_vol_label\n");
goto mount_next_vol;
}
- Jmsg(jcr, M_INFO, 0, _("Created Volume label %s on device %s.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
jcr->VolumeName, dev_name(dev));
goto read_volume; /* read label we just wrote */
}
Setting slot to zero in catalog.\n"),
jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
jcr->VolCatInfo.Slot = 0; /* invalidate slot */
+ Dmsg0(200, "update vol info in mount\n");
dir_update_volume_info(jcr, &jcr->VolCatInfo, 1); /* set slot */
}
Dmsg0(100, "Default\n");
dev->VolHdr.LabelType = VOL_LABEL; /* set Volume label */
write_volume_label_to_block(jcr, dev, block);
/*
- * Write the block now to ensure we have write permission.
+ * If we are not dealing with a streaming device,
+ * write the block now to ensure we have write permission.
* It is better to find out now rather than later.
*/
- dev->VolCatInfo.VolCatBytes = 0;
- if (!rewind_dev(dev)) {
- Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- }
- if (recycle) {
- if (!truncate_dev(dev)) {
- Jmsg2(jcr, M_WARNING, 0, _("Truncate error on device %s. ERR=%s\n"),
+ if (!dev_cap(dev, CAP_STREAM)) {
+ dev->VolCatInfo.VolCatBytes = 0;
+ if (!rewind_dev(dev)) {
+ Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
}
+ if (recycle) {
+ if (!truncate_dev(dev)) {
+ Jmsg2(jcr, M_WARNING, 0, _("Truncate error on device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ }
+ }
+ /* Attempt write to check write permission */
+ if (!write_block_to_dev(jcr, dev, block)) {
+ Jmsg2(jcr, M_ERROR, 0, _("Unable to write device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ goto mount_next_vol;
+ }
+ if (!rewind_dev(dev)) {
+ Jmsg2(jcr, M_ERROR, 0, _("Unable to rewind device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ goto mount_next_vol;
+ }
+
+ /* Recreate a correct volume label and return it in the block */
+ write_volume_label_to_block(jcr, dev, block);
}
- if (!write_block_to_dev(dev, block)) {
- Jmsg2(jcr, M_ERROR, 0, _("Unable to write device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- goto mount_next_vol;
- }
- if (!rewind_dev(dev)) {
- Jmsg2(jcr, M_ERROR, 0, _("Unable to rewind device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- goto mount_next_vol;
- }
- /* Recreate a correct volume label and return it in the block */
- write_volume_label_to_block(jcr, dev, block);
/* Set or reset Volume statistics */
- dev->VolCatInfo.VolCatJobs = 1;
- dev->VolCatInfo.VolCatFiles = 1;
+ dev->VolCatInfo.VolCatJobs = 0;
+ dev->VolCatInfo.VolCatFiles = 0;
dev->VolCatInfo.VolCatErrors = 0;
- dev->VolCatInfo.VolCatBlocks = 1;
+ dev->VolCatInfo.VolCatBlocks = 0;
if (recycle) {
dev->VolCatInfo.VolCatMounts++;
dev->VolCatInfo.VolCatRecycles++;
dev->VolCatInfo.VolCatReads = 1;
}
strcpy(dev->VolCatInfo.VolCatStatus, "Append");
- Dmsg0(100, "dir_update_vol_info. Set Append\n");
+ Dmsg0(200, "dir_update_vol_info. Set Append\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 1); /* indicate doing relabel */
if (recycle) {
- Jmsg(jcr, M_INFO, 0, _("Recycled volume %s on device %s, all previous data lost.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Recycled volume \"%s\" on device %s, all previous data lost.\n"),
jcr->VolumeName, dev_name(dev));
} else {
- Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume %s on device %s\n"),
+ Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume \"%s\" on device %s\n"),
jcr->VolumeName, dev_name(dev));
}
* just now putting it into append mode.
*/
Dmsg0(200, "Device previously written, moving to end of data\n");
- Jmsg(jcr, M_INFO, 0, _("Volume %s previously written, moving to end of data.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
jcr->VolumeName);
if (!eod_dev(dev)) {
Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
- Jmsg(jcr, M_INFO, 0, _("Marking Volume %s in Error in Catalog.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
jcr->VolumeName);
strcpy(dev->VolCatInfo.VolCatStatus, "Error");
- Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+ Dmsg0(200, "dir_update_vol_info. Set Error.\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
goto mount_next_vol;
}
* Check if we are positioned on the tape at the same place
* that the database says we should be.
*/
- if (dev->VolCatInfo.VolCatFiles == dev_file(dev) + 1) {
+ if (dev->VolCatInfo.VolCatFiles == dev_file(dev)) {
Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume at file=%d.\n"),
dev_file(dev));
} else {
Jmsg(jcr, M_ERROR, 0, _("I canot write on this volume because:\n\
The number of files mismatch! Volume=%d Catalog=%d\n"),
- dev_file(dev)+1, dev->VolCatInfo.VolCatFiles);
+ dev_file(dev), dev->VolCatInfo.VolCatFiles);
strcpy(dev->VolCatInfo.VolCatStatus, "Error");
- Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+ Dmsg0(200, "dir_update_vol_info. Set Error.\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
goto mount_next_vol;
}
}
dev->VolCatInfo.VolCatMounts++; /* Update mounts */
+ Dmsg1(200, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
/* Return an empty block */
empty_block(block); /* we used it for reading so set for write */
Dmsg0(90, "End of Device reached.\n");
return 0;
}
-
-/*
- * Called here to do an autoload using the autochanger, if
- * configured, and if a Slot has been defined for this Volume.
- * On success this routine loads the indicated tape, but the
- * label is not read, so it must be verified.
- *
- * Note if dir is not NULL, it is the console requesting the
- * autoload for labeling, so we respond directly to the
- * dir bsock.
- *
- * Returns: 1 on success
- * 0 on failure
- */
-int autoload_device(JCR *jcr, DEVICE *dev, int writing, BSOCK *dir)
-{
- int slot = jcr->VolCatInfo.Slot;
- int rtn_stat = 0;
-
- /*
- * Handle autoloaders here. If we cannot autoload it, we
- * will return FALSE to ask the sysop.
- */
- if (writing && dev->capabilities && CAP_AUTOCHANGER && slot <= 0) {
- if (dir) {
- return 0; /* For user, bail out right now */
- }
- if (dir_find_next_appendable_volume(jcr)) {
- slot = jcr->VolCatInfo.Slot;
- }
- }
- Dmsg1(100, "Want changer slot=%d\n", slot);
-
- if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
- uint32_t timeout = jcr->device->max_changer_wait;
- POOLMEM *changer, *results;
- int status, loaded;
-
- results = get_pool_memory(PM_MESSAGE);
- changer = get_pool_memory(PM_FNAME);
-
- /* Find out what is loaded, zero means device is unloaded */
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
- "loaded");
- status = run_program(changer, timeout, results);
- if (status == 0) {
- loaded = atoi(results);
- } else {
- loaded = -1; /* force unload */
- }
- Dmsg1(100, "loaded=%s\n", results);
-
- /* If bad status or tape we want is not loaded, load it. */
- if (status != 0 || loaded != slot) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
- offline_dev(dev);
- }
- /* We are going to load a new tape, so close the device */
- force_close_dev(dev);
- if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- if (dir) {
- bnet_fsend(dir, _("3902 Issuing autochanger \"unload\" command.\n"));
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
- }
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "unload");
- status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
- }
- /*
- * Load the desired cassette
- */
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- if (dir) {
- bnet_fsend(dir, _("3903 Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- }
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "load");
- status = run_program(changer, timeout, NULL);
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
- }
- free_pool_memory(changer);
- free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
- if (status == 0) { /* did we succeed? */
- rtn_stat = 1; /* tape loaded by changer */
- }
- }
- return rtn_stat;
-}
-
-
-
-/*
- * Edit codes into ChangerCommand
- * %% = %
- * %a = archive device name
- * %c = changer device name
- * %f = Client's name
- * %j = Job name
- * %o = command
- * %s = Slot base 0
- * %S = Slot base 1
- * %v = Volume name
- *
- *
- * omsg = edited output message
- * imsg = input string containing edit codes (%x)
- * cmd = command string (load, unload, ...)
- *
- */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd)
-{
- char *p;
- const char *str;
- char add[20];
-
- *omsg = 0;
- Dmsg1(200, "edit_device_codes: %s\n", imsg);
- for (p=imsg; *p; p++) {
- if (*p == '%') {
- switch (*++p) {
- case '%':
- str = "%";
- break;
- case 'a':
- str = jcr->device->dev->dev_name;
- break;
- case 'c':
- str = NPRT(jcr->device->changer_name);
- break;
- case 'o':
- str = NPRT(cmd);
- break;
- case 's':
- sprintf(add, "%d", jcr->VolCatInfo.Slot - 1);
- str = add;
- break;
- case 'S':
- sprintf(add, "%d", jcr->VolCatInfo.Slot);
- str = add;
- break;
- case 'j': /* Job name */
- str = jcr->Job;
- break;
- case 'v':
- str = NPRT(jcr->VolumeName);
- break;
- case 'f':
- str = NPRT(jcr->client_name);
- break;
-
- default:
- add[0] = '%';
- add[1] = *p;
- add[2] = 0;
- str = add;
- break;
- }
- } else {
- add[0] = *p;
- add[1] = 0;
- str = add;
- }
- Dmsg1(200, "add_str %s\n", str);
- pm_strcat(&omsg, (char *)str);
- Dmsg1(200, "omsg=%s\n", omsg);
- }
- return omsg;
-}