#include "stored.h" /* pull in Storage Deamon headers */
/* Forward referenced functions */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd);
/*
dev_name(dev));
return 0;
}
- if (job_cancelled(jcr)) {
- Jmsg(jcr, M_FATAL, 0, _("Job cancelled.\n"));
+ if (job_canceled(jcr)) {
+ Jmsg(jcr, M_FATAL, 0, _("Job canceled.\n"));
return 0;
}
recycle = ask = autochanger = 0;
*/
memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
/* Check if this is a valid Volume in the pool */
- strcpy(jcr->VolumeName, dev->VolHdr.VolName);
+ bstrncpy(jcr->VolumeName, dev->VolHdr.VolName, sizeof(jcr->VolumeName));
if (!dir_get_volume_info(jcr, 1)) {
Mmsg(&jcr->errmsg, _("Wanted Volume \"%s\".\n"
" Actual Volume \"%s\" not acceptable because:\n"
- " %s\n"),
+ " %s"),
dev->VolCatInfo.VolCatName, dev->VolHdr.VolName,
jcr->dir_bsock->msg);
/* Restore desired volume name, note device info out of sync */
Dmsg0(100, "!write_vol_label\n");
goto mount_next_vol;
}
- Jmsg(jcr, M_INFO, 0, _("Created Volume label %s on device %s.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
jcr->VolumeName, dev_name(dev));
goto read_volume; /* read label we just wrote */
}
Dmsg0(200, "dir_update_vol_info. Set Append\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 1); /* indicate doing relabel */
if (recycle) {
- Jmsg(jcr, M_INFO, 0, _("Recycled volume %s on device %s, all previous data lost.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Recycled volume \"%s\" on device %s, all previous data lost.\n"),
jcr->VolumeName, dev_name(dev));
} else {
- Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume %s on device %s\n"),
+ Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume \"%s\" on device %s\n"),
jcr->VolumeName, dev_name(dev));
}
* just now putting it into append mode.
*/
Dmsg0(200, "Device previously written, moving to end of data\n");
- Jmsg(jcr, M_INFO, 0, _("Volume %s previously written, moving to end of data.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
jcr->VolumeName);
if (!eod_dev(dev)) {
Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
- Jmsg(jcr, M_INFO, 0, _("Marking Volume %s in Error in Catalog.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
jcr->VolumeName);
strcpy(dev->VolCatInfo.VolCatStatus, "Error");
Dmsg0(200, "dir_update_vol_info. Set Error.\n");
Dmsg0(90, "End of Device reached.\n");
return 0;
}
-
-/*
- * Called here to do an autoload using the autochanger, if
- * configured, and if a Slot has been defined for this Volume.
- * On success this routine loads the indicated tape, but the
- * label is not read, so it must be verified.
- *
- * Note if dir is not NULL, it is the console requesting the
- * autoload for labeling, so we respond directly to the
- * dir bsock.
- *
- * Returns: 1 on success
- * 0 on failure
- */
-int autoload_device(JCR *jcr, DEVICE *dev, int writing, BSOCK *dir)
-{
- int slot = jcr->VolCatInfo.Slot;
- int rtn_stat = 0;
-
- /*
- * Handle autoloaders here. If we cannot autoload it, we
- * will return FALSE to ask the sysop.
- */
- if (writing && dev_cap(dev, CAP_AUTOCHANGER) && slot <= 0) {
- if (dir) {
- return 0; /* For user, bail out right now */
- }
- if (dir_find_next_appendable_volume(jcr)) {
- slot = jcr->VolCatInfo.Slot;
- }
- }
- Dmsg1(100, "Want changer slot=%d\n", slot);
-
- if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
- uint32_t timeout = jcr->device->max_changer_wait;
- POOLMEM *changer, *results;
- int status, loaded;
-
- results = get_pool_memory(PM_MESSAGE);
- changer = get_pool_memory(PM_FNAME);
-
- /* Find out what is loaded, zero means device is unloaded */
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
- "loaded");
- status = run_program(changer, timeout, results);
- Dmsg3(100, "run_prog: %s stat=%d result=%s\n", changer, status, results);
- if (status == 0) {
- loaded = atoi(results);
- } else {
- loaded = -1; /* force unload */
- }
- Dmsg1(100, "loaded=%s\n", results);
-
- /* If bad status or tape we want is not loaded, load it. */
- if (status != 0 || loaded != slot) {
- if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
- offline_dev(dev);
- }
- /* We are going to load a new tape, so close the device */
- force_close_dev(dev);
- if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- if (dir) {
- bnet_fsend(dir, _("3902 Issuing autochanger \"unload\" command.\n"));
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
- }
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "unload");
- status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
- }
- /*
- * Load the desired cassette
- */
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- if (dir) {
- bnet_fsend(dir, _("3903 Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- } else {
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- }
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "load");
- status = run_program(changer, timeout, NULL);
- if (status == 0) {
- Jmsg(jcr, M_INFO, 0, _("Autochanger \"load slot\" status is OK.\n"));
- } else {
- Jmsg(jcr, M_INFO, 0, _("Bad autochanger \"load slot\" status = %d.\n"),
- status);
- }
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
- }
- free_pool_memory(changer);
- free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
- if (status == 0) { /* did we succeed? */
- rtn_stat = 1; /* tape loaded by changer */
- }
- }
- return rtn_stat;
-}
-
-
-
-/*
- * Edit codes into ChangerCommand
- * %% = %
- * %a = archive device name
- * %c = changer device name
- * %f = Client's name
- * %j = Job name
- * %o = command
- * %s = Slot base 0
- * %S = Slot base 1
- * %v = Volume name
- *
- *
- * omsg = edited output message
- * imsg = input string containing edit codes (%x)
- * cmd = command string (load, unload, ...)
- *
- */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd)
-{
- char *p;
- const char *str;
- char add[20];
-
- *omsg = 0;
- Dmsg1(200, "edit_device_codes: %s\n", imsg);
- for (p=imsg; *p; p++) {
- if (*p == '%') {
- switch (*++p) {
- case '%':
- str = "%";
- break;
- case 'a':
- str = jcr->device->dev->dev_name;
- break;
- case 'c':
- str = NPRT(jcr->device->changer_name);
- break;
- case 'o':
- str = NPRT(cmd);
- break;
- case 's':
- sprintf(add, "%d", jcr->VolCatInfo.Slot - 1);
- str = add;
- break;
- case 'S':
- sprintf(add, "%d", jcr->VolCatInfo.Slot);
- str = add;
- break;
- case 'j': /* Job name */
- str = jcr->Job;
- break;
- case 'v':
- str = NPRT(jcr->VolumeName);
- break;
- case 'f':
- str = NPRT(jcr->client_name);
- break;
-
- default:
- add[0] = '%';
- add[1] = *p;
- add[2] = 0;
- str = add;
- break;
- }
- } else {
- add[0] = *p;
- add[1] = 0;
- str = add;
- }
- Dmsg1(200, "add_str %s\n", str);
- pm_strcat(&omsg, (char *)str);
- Dmsg1(200, "omsg=%s\n", omsg);
- }
- return omsg;
-}