JCR *jcr = dcr->jcr;
DEV_BLOCK *block = dcr->block;
- Dmsg1(100, "Enter mount_next_volume(release=%d)\n", release);
+ Dmsg1(150, "Enter mount_next_volume(release=%d)\n", release);
init_device_wait_timers(dcr);
}
recycle = false;
if (release) {
- Dmsg0(100, "mount_next_volume release=1\n");
+ Dmsg0(150, "mount_next_volume release=1\n");
release_volume(dcr);
ask = true; /* ask operator to mount tape */
}
if (job_canceled(jcr)) {
return false;
}
- Dmsg3(100, "After find_next_append. Vol=%s Slot=%d Parts=%d\n",
+ Dmsg3(150, "After find_next_append. Vol=%s Slot=%d Parts=%d\n",
dcr->VolCatInfo.VolCatName, dcr->VolCatInfo.Slot, dcr->VolCatInfo.VolCatParts);
/*
autochanger = false;
dcr->VolCatInfo.Slot = 0;
}
- Dmsg1(100, "autoload_dev returns %d\n", autochanger);
+ Dmsg1(200, "autoload_dev returns %d\n", autochanger);
/*
* If we autochanged to correct Volume or (we have not just
* released the Volume AND we can automount) we go ahead
* we will err, recurse and ask the operator the next time.
*/
if (!release && dev->is_tape() && dev_cap(dev, CAP_AUTOMOUNT)) {
- Dmsg0(100, "(1)Ask=0");
+ Dmsg0(150, "(1)Ask=0\n");
ask = false; /* don't ask SYSOP this time */
}
/* Don't ask if not removable */
if (!dev_cap(dev, CAP_REM)) {
- Dmsg0(100, "(2)Ask=0");
+ Dmsg0(150, "(2)Ask=0\n");
ask = false;
}
- Dmsg2(100, "Ask=%d autochanger=%d\n", ask, autochanger);
+ Dmsg2(150, "Ask=%d autochanger=%d\n", ask, autochanger);
release = true; /* release next time if we "recurse" */
if (ask && !dir_ask_sysop_to_mount_volume(dcr)) {
- Dmsg0(100, "Error return ask_sysop ...\n");
+ Dmsg0(150, "Error return ask_sysop ...\n");
return false; /* error return */
}
if (job_canceled(jcr)) {
return false;
}
- Dmsg1(100, "want vol=%s\n", dcr->VolumeName);
+ Dmsg1(150, "want vol=%s\n", dcr->VolumeName);
if (dev->poll && dev_cap(dev, CAP_CLOSEONPOLL)) {
force_close_device(dev);
return false;
}
- Dmsg2(100, "Want dirVol=%s dirStat=%s\n", dcr->VolumeName,
+ Dmsg2(150, "Want dirVol=%s dirStat=%s\n", dcr->VolumeName,
dcr->VolCatInfo.VolCatStatus);
/*
* At this point, dev->VolCatInfo has what is in the drive, if anything,
*/
switch (vol_label_status) {
case VOL_OK:
- Dmsg1(100, "Vol OK name=%s\n", dcr->VolumeName);
+ Dmsg1(150, "Vol OK name=%s\n", dcr->VolumeName);
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
break; /* got a Volume */
goto mount_next_vol;
}
- Dmsg1(100, "Vol NAME Error Name=%s\n", dcr->VolumeName);
+ Dmsg1(150, "Vol NAME Error Name=%s\n", dcr->VolumeName);
/* If polling and got a previous bad name, ignore it */
if (dev->poll && strcmp(dev->BadVolName, dev->VolHdr.VolumeName) == 0) {
ask = true;
/* This was not the volume we expected, but it is OK with
* the Director, so use it.
*/
- Dmsg1(100, "want new name=%s\n", dcr->VolumeName);
+ Dmsg1(150, "want new name=%s\n", dcr->VolumeName);
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
break; /* got a Volume */
if (dev_cap(dev, CAP_LABEL) && (dcr->VolCatInfo.VolCatBytes == 0 ||
(!dev->is_tape() && strcmp(dcr->VolCatInfo.VolCatStatus,
"Recycle") == 0))) {
- Dmsg0(100, "Create volume label\n");
+ Dmsg0(150, "Create volume label\n");
/* Create a new Volume label and write it to the device */
if (!write_new_volume_label_to_dev(dcr, dcr->VolumeName,
dcr->pool_name)) {
- Dmsg0(100, "!write_vol_label\n");
+ Dmsg0(150, "!write_vol_label\n");
mark_volume_in_error(dcr);
goto mount_next_vol;
}
- Dmsg0(100, "dir_update_vol_info. Set Append\n");
+ Dmsg0(150, "dir_update_vol_info. Set Append\n");
/* Copy Director's info into the device info */
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
if (!dir_update_volume_info(dcr, true)) { /* indicate tape labeled */
}
}
dev->VolCatInfo.VolCatMounts++; /* Update mounts */
- Dmsg1(100, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
+ Dmsg1(150, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
if (!dir_update_volume_info(dcr, false)) {
return false;
}
- /* DVD : check if the last part was removed or truncated, or if a written
- * part was overwritten. */
- /* We need to do it after dir_update_volume_info, so we have the EndBlock
+ /*
+ * DVD : check if the last part was removed or truncated, or if a written
+ * part was overwritten.
+ * We need to do it after dir_update_volume_info, so we have the EndBlock
* info. (nb: I don't understand why VolCatFiles is set (used to check
- * tape file number), but not EndBlock) */
- /* Maybe could it be changed "dev->is_file()" (would remove the fixme above) */
-
- /* Disabled: I had problems with this code... (maybe is it related to the seek bug ?) */
- /*if (dev->is_dvd()) {
- Dmsg2(100, "DVD/File sanity check addr=%u vs endblock=%u\n", (unsigned int)dev->file_addr, (unsigned int)dev->VolCatInfo.EndBlock);
+ * tape file number), but not EndBlock)
+ * Maybe could it be changed "dev->is_file()" (would remove the fixme above)
+ *
+ * Disabled: I had problems with this code...
+ * (maybe is it related to the seek bug ?)
+ */
+#ifdef xxx
+ if (dev->is_dvd()) {
+ Dmsg2(150, "DVD/File sanity check addr=%u vs endblock=%u\n", (unsigned int)dev->file_addr, (unsigned int)dev->VolCatInfo.EndBlock);
if (dev->file_addr == dev->VolCatInfo.EndBlock+1) {
Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\" at file address=%u.\n"),
dcr->VolumeName, (unsigned int)dev->file_addr);
mark_volume_in_error(dcr);
goto mount_next_vol;
}
- }*/
+ }
+#endif
/* Return an empty block */
empty_block(block); /* we used it for reading so set for write */
}
dev->set_append();
- Dmsg0(100, "set APPEND, normal return from read_dev_for_append\n");
+ Dmsg0(150, "set APPEND, normal return from read_dev_for_append\n");
return true;
}
dcr->VolumeName);
memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
- Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+ Dmsg0(150, "dir_update_vol_info. Set Error.\n");
dir_update_volume_info(dcr, false);
}
projects / bacula / bacula / blobdiff