/*
Bacula® - The Network Backup Solution
- Copyright (C) 2002-2007 Free Software Foundation Europe e.V.
+ Copyright (C) 2002-2010 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
- modify it under the terms of version two of the GNU General Public
+ modify it under the terms of version three of the GNU Affero General Public
License as published by the Free Software Foundation and included
in the file LICENSE.
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Affero General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of Kern Sibbald.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
*
* Kern Sibbald, August MMII
*
- * Version $Id$
*/
#include "bacula.h" /* pull in global headers */
#include "stored.h" /* pull in Storage Deamon headers */
-static void mark_volume_not_inchanger(DCR *dcr);
-static int try_autolabel(DCR *dcr, bool opened);
-
enum {
try_next_vol = 1,
try_read_vol,
try_default
};
+enum {
+ check_next_vol = 1,
+ check_ok,
+ check_read_vol,
+ check_error
+};
+
/*
* If release is set, we rewind the current volume,
* which we no longer want, and ask the user (console)
* This routine returns a 0 only if it is REALLY
* impossible to get the requested Volume.
*
+ * This routine is entered with the device blocked, but not
+ * locked.
+ *
*/
-bool mount_next_write_volume(DCR *dcr, bool release)
+bool DCR::mount_next_write_volume()
{
int retry = 0;
bool ask = false, recycle, autochanger;
- int vol_label_status;
- DEVICE *dev = dcr->dev;
- JCR *jcr = dcr->jcr;
- DEV_BLOCK *block = dcr->block;
int mode;
+ DCR *dcr = this;
- Dmsg2(150, "Enter mount_next_volume(release=%d) dev=%s\n", release,
+ Dmsg2(150, "Enter mount_next_volume(release=%d) dev=%s\n", dev->must_unload(),
dev->print_name());
init_device_wait_timers(dcr);
-
+
/*
* Attempt to mount the next volume. If something non-fatal goes
* wrong, we come back here to re-try (new op messages, re-read
* Volume, ...)
*/
+ lock_volumes();
+
mount_next_vol:
Dmsg1(150, "mount_next_vol retry=%d\n", retry);
/* Ignore retry if this is poll request */
- if (!dev->poll && retry++ > 4) {
+ if (retry++ > 4) {
/* Last ditch effort before giving up, force operator to respond */
- dcr->VolCatInfo.Slot = 0;
- if (!dir_ask_sysop_to_mount_volume(dcr)) {
+ VolCatInfo.Slot = 0;
+ unlock_volumes();
+ if (!dir_ask_sysop_to_mount_volume(dcr, ST_APPEND)) {
Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
dev->print_name());
- return false;
+ goto no_lock_bail_out;
}
+ lock_volumes();
+ Dmsg1(150, "Continue after dir_ask_sysop_to_mount. must_load=%d\n", dev->must_load());
}
if (job_canceled(jcr)) {
Jmsg(jcr, M_FATAL, 0, _("Job %d canceled.\n"), jcr->JobId);
- return false;
+ goto bail_out;
}
recycle = false;
- if (release) {
- Dmsg0(150, "mount_next_volume release=1\n");
- release_volume(dcr);
+
+ if (dev->must_unload()) {
ask = true; /* ask operator to mount tape */
}
+ do_unload();
+ do_swapping(true /*is_writing*/);
+ do_load(true /*is_writing*/);
- /*
- * Get Director's idea of what tape we should have mounted.
- * in dcr->VolCatInfo
- */
- Dmsg0(200, "Before dir_find_next_appendable_volume.\n");
- while (!dir_find_next_appendable_volume(dcr)) {
- Dmsg0(200, "not dir_find_next\n");
- if (!dir_ask_sysop_to_create_appendable_volume(dcr)) {
- return false;
- }
- Dmsg0(200, "Again dir_find_next_append...\n");
+ if (!find_a_volume()) {
+ goto bail_out;
}
+
if (job_canceled(jcr)) {
- return false;
+ goto bail_out;
}
Dmsg3(150, "After find_next_append. Vol=%s Slot=%d Parts=%d\n",
- dcr->VolCatInfo.VolCatName, dcr->VolCatInfo.Slot, dcr->VolCatInfo.VolCatParts);
+ getVolCatName(), VolCatInfo.Slot, VolCatInfo.VolCatParts);
/*
* Get next volume and ready it for append
* and move the tape to the end of data.
*
*/
- if (autoload_device(dcr, 1, NULL) > 0) {
+ dcr->setVolCatInfo(false); /* out of date when Vols unlocked */
+ if (autoload_device(dcr, true/*writing*/, NULL) > 0) {
autochanger = true;
ask = false;
} else {
autochanger = false;
- dcr->VolCatInfo.Slot = 0;
+ VolCatInfo.Slot = 0;
+ ask = retry >= 2;
}
- Dmsg1(200, "autoload_dev returns %d\n", autochanger);
+ Dmsg1(150, "autoload_dev returns %d\n", autochanger);
/*
* If we autochanged to correct Volume or (we have not just
* released the Volume AND we can automount) we go ahead
* and read the label. If there is no tape in the drive,
- * we will err, recurse and ask the operator the next time.
+ * we will fail, recurse and ask the operator the next time.
*/
- if (!release && dev->is_tape() && dev->has_cap(CAP_AUTOMOUNT)) {
- Dmsg0(150, "(1)Ask=0\n");
+ if (!dev->must_unload() && dev->is_tape() && dev->has_cap(CAP_AUTOMOUNT)) {
+ Dmsg0(250, "(1)Ask=0\n");
ask = false; /* don't ask SYSOP this time */
}
/* Don't ask if not removable */
if (!dev->is_removable()) {
- Dmsg0(150, "(2)Ask=0\n");
+ Dmsg0(250, "(2)Ask=0\n");
ask = false;
}
- Dmsg2(150, "Ask=%d autochanger=%d\n", ask, autochanger);
- release = true; /* release next time if we "recurse" */
-
- if (ask && !dir_ask_sysop_to_mount_volume(dcr)) {
- Dmsg0(150, "Error return ask_sysop ...\n");
- return false; /* error return */
+ Dmsg2(250, "Ask=%d autochanger=%d\n", ask, autochanger);
+
+ if (ask) {
+ unlock_volumes();
+ dcr->setVolCatInfo(false); /* out of date when Vols unlocked */
+ if (!dir_ask_sysop_to_mount_volume(dcr, ST_APPEND)) {
+ Dmsg0(150, "Error return ask_sysop ...\n");
+ goto no_lock_bail_out;
+ }
+ lock_volumes();
}
if (job_canceled(jcr)) {
- return false;
+ goto bail_out;
}
- Dmsg1(150, "want vol=%s\n", dcr->VolumeName);
+ Dmsg3(150, "want vol=%s devvol=%s dev=%s\n", VolumeName,
+ dev->VolHdr.VolumeName, dev->print_name());
if (dev->poll && dev->has_cap(CAP_CLOSEONPOLL)) {
dev->close();
+ free_volume(dev);
}
/* Ensure the device is open */
}
/* Try autolabel if enabled */
if (dev->open(dcr, mode) < 0) {
- try_autolabel(dcr, false); /* try to create a new volume label */
+ try_autolabel(false); /* try to create a new volume label */
}
while (dev->open(dcr, mode) < 0) {
Dmsg1(150, "open_device failed: ERR=%s\n", dev->bstrerror());
dev->unmount(0);
}
}
- if (try_autolabel(dcr, false) == try_read_vol) {
+ if (try_autolabel(false) == try_read_vol) {
break; /* created a new volume label */
}
- /* If DVD, ignore the error, very often you cannot open the device
- * (when there is no DVD, or when the one inserted is a wrong one) */
- if (dev->poll || dev->is_dvd() || dev->is_removable()) {
+ Jmsg3(jcr, M_WARNING, 0, _("Open device %s Volume \"%s\" failed: ERR=%s\n"),
+ dev->print_name(), dcr->VolumeName, dev->bstrerror());
+ Dmsg0(50, "set_unload\n");
+ dev->set_unload(); /* force ask sysop */
+ ask = true;
+ Dmsg0(150, "goto mount_next_vol\n");
+ goto mount_next_vol;
+ }
+
+ /*
+ * Now check the volume label to make sure we have the right tape mounted
+ */
+read_volume:
+ switch (check_volume_label(ask, autochanger)) {
+ case check_next_vol:
+ Dmsg0(50, "set_unload\n");
+ dev->set_unload(); /* want a different Volume */
+ Dmsg0(150, "goto mount_next_vol\n");
+ goto mount_next_vol;
+ case check_read_vol:
+ goto read_volume;
+ case check_error:
+ goto bail_out;
+ case check_ok:
+ break;
+ }
+ /*
+ * Check that volcatinfo is good
+ */
+ if (!dev->haveVolCatInfo()) {
+ Dmsg0(100, "Do not have volcatinfo\n");
+ if (!find_a_volume()) {
goto mount_next_vol;
- } else {
- Jmsg(jcr, M_ERROR, 0, _("Could not open device %s: ERR=%s\n"),
- dev->print_name(), dev->print_errmsg());
- return false;
}
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
}
/*
- * Now make sure we have the right tape mounted
+ * See if we have a fresh tape or a tape with data.
+ *
+ * Note, if the LabelType is PRE_LABEL, it was labeled
+ * but never written. If so, rewrite the label but set as
+ * VOL_LABEL. We rewind and return the label (reconstructed)
+ * in the block so that in the case of a new tape, data can
+ * be appended just after the block label. If we are writing
+ * a second volume, the calling routine will write the label
+ * before writing the overflow block.
+ *
+ * If the tape is marked as Recycle, we rewrite the label.
*/
-read_volume:
+ recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
+ if (dev->VolHdr.LabelType == PRE_LABEL || recycle) {
+ if (!rewrite_volume_label(dcr, recycle)) {
+ mark_volume_in_error();
+ goto mount_next_vol;
+ }
+ } else {
+ /*
+ * OK, at this point, we have a valid Bacula label, but
+ * we need to position to the end of the volume, since we are
+ * just now putting it into append mode.
+ */
+ Dmsg1(100, "Device previously written, moving to end of data. Expect %lld bytes\n",
+ dev->VolCatInfo.VolCatBytes);
+ Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
+ VolumeName);
+
+ if (!dev->eod(dcr)) {
+ Dmsg2(050, "Unable to position to end of data on device %s: ERR=%s\n",
+ dev->print_name(), dev->bstrerror());
+ Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data on device %s: ERR=%s\n"),
+ dev->print_name(), dev->bstrerror());
+ mark_volume_in_error();
+ goto mount_next_vol;
+ }
+ if (!is_eod_valid()) {
+ Dmsg0(100, "goto mount_next_vol\n");
+ goto mount_next_vol;
+ }
+
+ dev->VolCatInfo.VolCatMounts++; /* Update mounts */
+ Dmsg1(150, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
+ if (!dir_update_volume_info(dcr, false, false)) {
+ goto bail_out;
+ }
+
+ /* Return an empty block */
+ empty_block(block); /* we used it for reading so set for write */
+ }
+ dev->set_append();
+ Dmsg1(150, "set APPEND, normal return from mount_next_write_volume. dev=%s\n",
+ dev->print_name());
+
+ unlock_volumes();
+ return true;
+
+bail_out:
+ unlock_volumes();
+
+no_lock_bail_out:
+ return false;
+}
+
+/*
+ * This routine is meant to be called once the first pass
+ * to ensure that we have a candidate volume to mount.
+ * Otherwise, we ask the sysop to created one.
+ * Note, the the Volumes are locked on entry and exit.
+ */
+bool DCR::find_a_volume()
+{
+ DCR *dcr = this;
+
+ if (!is_suitable_volume_mounted()) {
+ bool have_vol = false;
+ /* Do we have a candidate volume? */
+ if (dev->vol) {
+ bstrncpy(VolumeName, dev->vol->vol_name, sizeof(VolumeName));
+ have_vol = dir_get_volume_info(this, GET_VOL_INFO_FOR_WRITE);
+ }
+ /*
+ * Get Director's idea of what tape we should have mounted.
+ * in dcr->VolCatInfo
+ */
+ if (!have_vol) {
+ Dmsg0(200, "Before dir_find_next_appendable_volume.\n");
+ while (!dir_find_next_appendable_volume(dcr)) {
+ Dmsg0(200, "not dir_find_next\n");
+ if (job_canceled(jcr)) {
+ return false;
+ }
+ unlock_volumes();
+ if (!dir_ask_sysop_to_create_appendable_volume(dcr)) {
+ lock_volumes();
+ return false;
+ }
+ lock_volumes();
+ if (job_canceled(jcr)) {
+ return false;
+ }
+ Dmsg0(150, "Again dir_find_next_append...\n");
+ }
+ }
+ }
+ if (dcr->haveVolCatInfo()) {
+ return true;
+ }
+ return dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE);
+}
+
+int DCR::check_volume_label(bool &ask, bool &autochanger)
+{
+ int vol_label_status;
/*
* If we are writing to a stream device, ASSUME the volume label
* is correct.
*/
if (dev->has_cap(CAP_STREAM)) {
vol_label_status = VOL_OK;
- create_volume_label(dev, dcr->VolumeName, "Default", false /* not DVD */);
+ create_volume_label(dev, VolumeName, "Default", false /* not DVD */);
dev->VolHdr.LabelType = PRE_LABEL;
} else {
- vol_label_status = read_dev_volume_label(dcr);
+ vol_label_status = read_dev_volume_label(this);
}
if (job_canceled(jcr)) {
- return false;
+ goto check_bail_out;
}
- Dmsg2(150, "Want dirVol=%s dirStat=%s\n", dcr->VolumeName,
- dcr->VolCatInfo.VolCatStatus);
+ Dmsg2(150, "Want dirVol=%s dirStat=%s\n", VolumeName,
+ VolCatInfo.VolCatStatus);
+
/*
* At this point, dev->VolCatInfo has what is in the drive, if anything,
* and dcr->VolCatInfo has what the Director wants.
*/
switch (vol_label_status) {
case VOL_OK:
- Dmsg1(150, "Vol OK name=%s\n", dcr->VolumeName);
- dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
- recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
+ Dmsg1(150, "Vol OK name=%s\n", dev->VolHdr.VolumeName);
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
break; /* got a Volume */
case VOL_NAME_ERROR:
VOLUME_CAT_INFO dcrVolCatInfo, devVolCatInfo;
- char VolumeName[MAX_NAME_LENGTH];
+ char saveVolumeName[MAX_NAME_LENGTH];
+
+ Dmsg2(150, "Vol NAME Error Have=%s, want=%s\n", dev->VolHdr.VolumeName, VolumeName);
+ if (dev->is_volume_to_unload()) {
+ ask = true;
+ goto check_next_volume;
+ }
/* If not removable, Volume is broken */
if (!dev->is_removable()) {
Jmsg(jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
- dcr->VolumeName, dev->print_name());
- mark_volume_in_error(dcr);
- goto mount_next_vol;
+ VolumeName, dev->print_name());
+ mark_volume_in_error();
+ goto check_next_volume;
}
- Dmsg1(150, "Vol NAME Error Name=%s\n", dcr->VolumeName);
- /* If polling and got a previous bad name, ignore it */
- if (dev->poll && strcmp(dev->BadVolName, dev->VolHdr.VolumeName) == 0) {
- ask = true;
- Dmsg1(200, "Vol Name error supress due to poll. Name=%s\n", dcr->VolumeName);
- goto mount_next_vol;
- }
/*
* OK, we got a different volume mounted. First save the
* requested Volume info (dcr) structure, then query if
* this volume is really OK. If not, put back the desired
* volume name, mark it not in changer and continue.
*/
- dcrVolCatInfo = dcr->VolCatInfo; /* structure assignment */
+ dcrVolCatInfo = VolCatInfo; /* structure assignment */
devVolCatInfo = dev->VolCatInfo; /* structure assignment */
/* Check if this is a valid Volume in the pool */
- bstrncpy(VolumeName, dcr->VolumeName, sizeof(VolumeName));
- bstrncpy(dcr->VolumeName, dev->VolHdr.VolumeName, sizeof(dcr->VolumeName));
- if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE)) {
+ bstrncpy(saveVolumeName, VolumeName, sizeof(saveVolumeName));
+ bstrncpy(VolumeName, dev->VolHdr.VolumeName, sizeof(VolumeName));
+ if (!dir_get_volume_info(this, GET_VOL_INFO_FOR_WRITE)) {
POOL_MEM vol_info_msg;
pm_strcpy(vol_info_msg, jcr->dir_bsock->msg); /* save error message */
/* Restore desired volume name, note device info out of sync */
/* This gets the info regardless of the Pool */
- bstrncpy(dcr->VolumeName, dev->VolHdr.VolumeName, sizeof(dcr->VolumeName));
- if (autochanger && !dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
+ bstrncpy(VolumeName, dev->VolHdr.VolumeName, sizeof(VolumeName));
+ if (autochanger && !dir_get_volume_info(this, GET_VOL_INFO_FOR_READ)) {
/*
* If we get here, we know we cannot write on the Volume,
* and we know that we cannot read it either, so it
* is not in the autochanger.
*/
- mark_volume_not_inchanger(dcr);
+ mark_volume_not_inchanger();
}
dev->VolCatInfo = devVolCatInfo; /* structure assignment */
- bstrncpy(dev->BadVolName, dev->VolHdr.VolumeName, sizeof(dev->BadVolName));
+ dev->set_unload(); /* unload this volume */
Jmsg(jcr, M_WARNING, 0, _("Director wanted Volume \"%s\".\n"
" Current Volume \"%s\" not acceptable because:\n"
" %s"),
vol_info_msg.c_str());
ask = true;
/* Restore saved DCR before continuing */
- bstrncpy(dcr->VolumeName, VolumeName, sizeof(dcr->VolumeName));
- dcr->VolCatInfo = dcrVolCatInfo; /* structure assignment */
- goto mount_next_vol;
+ bstrncpy(VolumeName, saveVolumeName, sizeof(VolumeName));
+ VolCatInfo = dcrVolCatInfo; /* structure assignment */
+ goto check_next_volume;
}
/*
* This was not the volume we expected, but it is OK with
* the Director, so use it.
*/
- Dmsg1(150, "want new name=%s\n", dcr->VolumeName);
- dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
- recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
+ Dmsg1(150, "Got new Volume name=%s\n", VolumeName);
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
+ Dmsg1(100, "Call reserve_volume=%s\n", dev->VolHdr.VolumeName);
+ if (reserve_volume(this, dev->VolHdr.VolumeName) == NULL) {
+ Jmsg2(jcr, M_WARNING, 0, _("Could not reserve volume %s on %s\n"),
+ dev->VolHdr.VolumeName, dev->print_name());
+ ask = true;
+ dev->setVolCatInfo(false);
+ setVolCatInfo(false);
+ goto check_next_volume;
+ }
break; /* got a Volume */
/*
* At this point, we assume we have a blank tape mounted.
case VOL_IO_ERROR:
if (dev->is_dvd()) {
Jmsg(jcr, M_FATAL, 0, "%s", jcr->errmsg);
- mark_volume_in_error(dcr);
- return false; /* we could not write on DVD */
+ mark_volume_in_error();
+ goto check_bail_out; /* we could not write on DVD */
}
/* Fall through wanted */
case VOL_NO_LABEL:
- switch (try_autolabel(dcr, true)) {
+ switch (try_autolabel(true)) {
case try_next_vol:
- goto mount_next_vol;
+ goto check_next_volume;
case try_read_vol:
- goto read_volume;
+ goto check_read_volume;
case try_error:
- return false;
+ goto check_bail_out;
case try_default:
break;
}
-
/* NOTE! Fall-through wanted. */
case VOL_NO_MEDIA:
default:
/* Needed, so the medium can be changed */
if (dev->requires_mount()) {
dev->close();
+ free_volume(dev);
}
- goto mount_next_vol;
+ goto check_next_volume;
+ }
+ return check_ok;
+
+check_next_volume:
+ dev->setVolCatInfo(false);
+ setVolCatInfo(false);
+ return check_next_vol;
+
+check_bail_out:
+ return check_error;
+
+check_read_volume:
+ return check_read_vol;
+
+}
+
+
+bool DCR::is_suitable_volume_mounted()
+{
+ /* Volume mounted? */
+ if (dev->VolHdr.VolumeName[0] == 0 || dev->swap_dev || dev->must_unload()) {
+ return false; /* no */
+ }
+ bstrncpy(VolumeName, dev->VolHdr.VolumeName, sizeof(VolumeName));
+ return dir_get_volume_info(this, GET_VOL_INFO_FOR_WRITE);
+}
+
+bool DCR::do_unload()
+{
+ if (dev->must_unload()) {
+ Dmsg1(100, "must_unload release %s\n", dev->print_name());
+ release_volume();
+ }
+ return false;
+}
+
+bool DCR::do_load(bool is_writing)
+{
+ if (dev->must_load()) {
+ Dmsg1(100, "Must load %s\n", dev->print_name());
+ if (autoload_device(this, is_writing, NULL) > 0) {
+ dev->clear_load();
+ return true;
+ }
+ return false;
}
+ return true;
+}
+void DCR::do_swapping(bool is_writing)
+{
/*
- * See if we have a fresh tape or a tape with data.
- *
- * Note, if the LabelType is PRE_LABEL, it was labeled
- * but never written. If so, rewrite the label but set as
- * VOL_LABEL. We rewind and return the label (reconstructed)
- * in the block so that in the case of a new tape, data can
- * be appended just after the block label. If we are writing
- * a second volume, the calling routine will write the label
- * before writing the overflow block.
- *
- * If the tape is marked as Recycle, we rewrite the label.
+ * See if we are asked to swap the Volume from another device
+ * if so, unload the other device here, and attach the
+ * volume to our drive.
*/
- if (dev->VolHdr.LabelType == PRE_LABEL || recycle) {
- if (!rewrite_volume_label(dcr, recycle)) {
- mark_volume_in_error(dcr);
- goto mount_next_vol;
+ if (dev->swap_dev) {
+ if (dev->swap_dev->must_unload()) {
+ if (dev->vol) {
+ dev->swap_dev->set_slot(dev->vol->get_slot());
+ }
+ Dmsg2(100, "Swap unloading slot=%d %s\n", dev->swap_dev->get_slot(),
+ dev->swap_dev->print_name());
+ unload_dev(this, dev->swap_dev);
}
- } else {
- /*
- * OK, at this point, we have a valid Bacula label, but
- * we need to position to the end of the volume, since we are
- * just now putting it into append mode.
- */
- Dmsg0(200, "Device previously written, moving to end of data\n");
- Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
- dcr->VolumeName);
- if (!dev->eod(dcr)) {
- Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data on device %s: ERR=%s\n"),
- dev->print_name(), dev->bstrerror());
- mark_volume_in_error(dcr);
- goto mount_next_vol;
+ if (dev->vol) {
+ dev->vol->clear_swapping();
+ Dmsg1(100, "=== set in_use vol=%s\n", dev->vol->vol_name);
+ dev->vol->set_in_use();
+ dev->VolHdr.VolumeName[0] = 0; /* don't yet have right Volume */
+ } else {
+ Dmsg1(100, "No vol on dev=%s\n", dev->print_name());
}
- if (dev->is_dvd()) {
- char ed1[50], ed2[50];
- if (dev->VolCatInfo.VolCatBytes == dev->part_start + dev->part_size) {
- Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\""
- " part=%d size=%s\n"), dcr->VolumeName,
- dev->part, edit_uint64(dev->VolCatInfo.VolCatBytes,ed1));
- } else {
- Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on DVD Volume \"%s\" because: "
- "The sizes do not match! Volume=%s Catalog=%s\n"),
- dcr->VolumeName,
- edit_uint64(dev->part_start + dev->part_size, ed1),
- edit_uint64(dev->VolCatInfo.VolCatBytes, ed2));
- mark_volume_in_error(dcr);
- goto mount_next_vol;
- }
- } else if (dev->is_tape()) {
- /*
- * Check if we are positioned on the tape at the same place
- * that the database says we should be.
- */
- if (dev->VolCatInfo.VolCatFiles == dev->get_file()) {
- Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\" at file=%d.\n"),
- dcr->VolumeName, dev->get_file());
- } else {
- Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on tape Volume \"%s\" because:\n"
- "The number of files mismatch! Volume=%u Catalog=%u\n"),
- dcr->VolumeName, dev->get_file(), dev->VolCatInfo.VolCatFiles);
- mark_volume_in_error(dcr);
- goto mount_next_vol;
- }
- } else if (dev->is_file()) {
- char ed1[50], ed2[50];
- boffset_t pos;
- pos = dev->lseek(dcr, (boffset_t)0, SEEK_END);
- if (dev->VolCatInfo.VolCatBytes == (uint64_t)pos) {
- Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\""
- " size=%s\n"), dcr->VolumeName,
- edit_uint64(dev->VolCatInfo.VolCatBytes, ed1));
- } else {
- Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on disk Volume \"%s\" because: "
- "The sizes do not match! Volume=%s Catalog=%s\n"),
- dcr->VolumeName,
- edit_uint64(pos, ed1),
- edit_uint64(dev->VolCatInfo.VolCatBytes, ed2));
- mark_volume_in_error(dcr);
- goto mount_next_vol;
- }
+ if (dev->swap_dev->vol) {
+ Dmsg2(100, "Vol=%s on dev=%s\n", dev->swap_dev->vol->vol_name,
+ dev->swap_dev->print_name());
}
- dev->VolCatInfo.VolCatMounts++; /* Update mounts */
- Dmsg1(150, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
- if (!dir_update_volume_info(dcr, false)) {
+ dev->swap_dev = NULL;
+ }
+}
+
+
+/*
+ * Check if the current position on the volume corresponds to
+ * what is in the catalog.
+ */
+bool DCR::is_eod_valid()
+{
+ if (dev->is_dvd()) {
+ char ed1[50], ed2[50];
+ if (dev->VolCatInfo.VolCatBytes == dev->part_start + dev->part_size) {
+ Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\""
+ " part=%d size=%s\n"), VolumeName,
+ dev->part, edit_uint64(dev->VolCatInfo.VolCatBytes,ed1));
+ } else {
+ Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on DVD Volume \"%s\" because: "
+ "The sizes do not match! Volume=%s Catalog=%s\n"),
+ VolumeName,
+ edit_uint64(dev->part_start + dev->part_size, ed1),
+ edit_uint64(dev->VolCatInfo.VolCatBytes, ed2));
+ mark_volume_in_error();
return false;
}
-
+ } else if (dev->is_tape()) {
/*
- * DVD : check if the last part was removed or truncated, or if a written
- * part was overwritten.
- * We need to do it after dir_update_volume_info, so we have the EndBlock
- * info. (nb: I don't understand why VolCatFiles is set (used to check
- * tape file number), but not EndBlock)
- * Maybe could it be changed "dev->is_file()" (would remove the fixme above)
- *
- * Disabled: I had problems with this code...
- * (maybe is it related to the seek bug ?)
+ * Check if we are positioned on the tape at the same place
+ * that the database says we should be.
*/
-#ifdef xxx
- if (dev->is_dvd()) {
- Dmsg2(150, "DVD/File sanity check addr=%u vs endblock=%u\n", (unsigned int)dev->file_addr, (unsigned int)dev->VolCatInfo.EndBlock);
- if (dev->file_addr == dev->VolCatInfo.EndBlock+1) {
- Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\" at file address=%u.\n"),
- dcr->VolumeName, (unsigned int)dev->file_addr);
+ if (dev->VolCatInfo.VolCatFiles == dev->get_file()) {
+ Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\" at file=%d.\n"),
+ VolumeName, dev->get_file());
+ } else if (dev->get_file() > dev->VolCatInfo.VolCatFiles) {
+ Jmsg(jcr, M_WARNING, 0, _("For Volume \"%s\":\n"
+ "The number of files mismatch! Volume=%u Catalog=%u\n"
+ "Correcting Catalog\n"),
+ VolumeName, dev->get_file(), dev->VolCatInfo.VolCatFiles);
+ dev->VolCatInfo.VolCatFiles = dev->get_file();
+ dev->VolCatInfo.VolCatBlocks = dev->get_block_num();
+ if (!dir_update_volume_info(this, false, true)) {
+ Jmsg(jcr, M_WARNING, 0, _("Error updating Catalog\n"));
+ mark_volume_in_error();
+ return false;
}
- else {
- Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on Volume \"%s\" because:\n"
- "The EOD file address is wrong: Volume file address=%u != Catalog Endblock=%u(+1)\n"
- "Perhaps You removed the DVD last part in spool directory.\n"),
- dcr->VolumeName, (unsigned int)dev->file_addr, (unsigned int)dev->VolCatInfo.EndBlock);
- mark_volume_in_error(dcr);
- goto mount_next_vol;
+ } else {
+ Jmsg(jcr, M_ERROR, 0, _("Bacula cannot write on tape Volume \"%s\" because:\n"
+ "The number of files mismatch! Volume=%u Catalog=%u\n"),
+ VolumeName, dev->get_file(), dev->VolCatInfo.VolCatFiles);
+ mark_volume_in_error();
+ return false;
+ }
+ } else if (dev->is_file()) {
+ char ed1[50], ed2[50];
+ boffset_t pos;
+ pos = dev->lseek(this, (boffset_t)0, SEEK_END);
+ if (dev->VolCatInfo.VolCatBytes == (uint64_t)pos) {
+ Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\""
+ " size=%s\n"), VolumeName,
+ edit_uint64(dev->VolCatInfo.VolCatBytes, ed1));
+ } else if ((uint64_t)pos > dev->VolCatInfo.VolCatBytes) {
+ Jmsg(jcr, M_WARNING, 0, _("For Volume \"%s\":\n"
+ "The sizes do not match! Volume=%s Catalog=%s\n"
+ "Correcting Catalog\n"),
+ VolumeName, edit_uint64(pos, ed1),
+ edit_uint64(dev->VolCatInfo.VolCatBytes, ed2));
+ dev->VolCatInfo.VolCatBytes = (uint64_t)pos;
+ dev->VolCatInfo.VolCatFiles = (uint32_t)(pos >> 32);
+ if (!dir_update_volume_info(this, false, true)) {
+ Jmsg(jcr, M_WARNING, 0, _("Error updating Catalog\n"));
+ mark_volume_in_error();
+ return false;
}
+ } else {
+ Mmsg(jcr->errmsg, _("Bacula cannot write on disk Volume \"%s\" because: "
+ "The sizes do not match! Volume=%s Catalog=%s\n"),
+ VolumeName,
+ edit_uint64(pos, ed1),
+ edit_uint64(dev->VolCatInfo.VolCatBytes, ed2));
+ Jmsg(jcr, M_ERROR, 0, jcr->errmsg);
+ Dmsg0(050, jcr->errmsg);
+ mark_volume_in_error();
+ return false;
}
-#endif
-
- /* Return an empty block */
- empty_block(block); /* we used it for reading so set for write */
}
- dev->set_append();
- Dmsg1(150, "set APPEND, normal return from mount_next_write_volume. dev=%s\n",
- dev->print_name());
-
return true;
}
+
/*
* If permitted, we label the device, make sure we can do
* it by checking that the VolCatBytes is zero => not labeled,
* try_error hard error (catalog update)
* try_default I couldn't do anything
*/
-static int try_autolabel(DCR *dcr, bool opened)
+int DCR::try_autolabel(bool opened)
{
- DEVICE *dev = dcr->dev;
+ DCR *dcr = this;
if (dev->poll && !dev->is_tape()) {
return try_default; /* if polling, don't try to create new labels */
if (!opened && dev->is_tape()) {
return try_default;
}
- if (dev->has_cap(CAP_LABEL) && (dcr->VolCatInfo.VolCatBytes == 0 ||
- (!dev->is_tape() && strcmp(dcr->VolCatInfo.VolCatStatus,
+ if (dev->has_cap(CAP_LABEL) && (VolCatInfo.VolCatBytes == 0 ||
+ (!dev->is_tape() && strcmp(VolCatInfo.VolCatStatus,
"Recycle") == 0))) {
Dmsg0(150, "Create volume label\n");
/* Create a new Volume label and write it to the device */
- if (!write_new_volume_label_to_dev(dcr, dcr->VolumeName,
- dcr->pool_name, false, /* no relabel */ false /* defer DVD label */)) {
- Dmsg0(150, "!write_vol_label\n");
+ if (!write_new_volume_label_to_dev(dcr, VolumeName,
+ pool_name, false, /* no relabel */ false /* defer DVD label */)) {
+ Dmsg2(150, "write_vol_label failed. vol=%s, pool=%s\n",
+ VolumeName, pool_name);
if (opened) {
- mark_volume_in_error(dcr);
+ mark_volume_in_error();
}
return try_next_vol;
}
Dmsg0(150, "dir_update_vol_info. Set Append\n");
/* Copy Director's info into the device info */
- dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
- if (!dir_update_volume_info(dcr, true)) { /* indicate tape labeled */
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
+ if (!dir_update_volume_info(dcr, true, true)) { /* indicate tape labeled */
return try_error;
}
Jmsg(dcr->jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
- dcr->VolumeName, dev->print_name());
+ VolumeName, dev->print_name());
return try_read_vol; /* read label we just wrote */
}
- if (!dev->has_cap(CAP_LABEL) && dcr->VolCatInfo.VolCatBytes == 0) {
- Jmsg(dcr->jcr, M_WARNING, 0, _("Device %s not configured to autolabel Volumes.\n"),
+ if (!dev->has_cap(CAP_LABEL) && VolCatInfo.VolCatBytes == 0) {
+ Jmsg(jcr, M_WARNING, 0, _("Device %s not configured to autolabel Volumes.\n"),
dev->print_name());
}
/* If not removable, Volume is broken */
if (!dev->is_removable()) {
- Jmsg(dcr->jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
- dcr->VolumeName, dev->print_name());
- mark_volume_in_error(dcr);
+ Jmsg(jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
+ VolumeName, dev->print_name());
+ mark_volume_in_error();
return try_next_vol;
}
return try_default;
/*
* Mark volume in error in catalog
*/
-void mark_volume_in_error(DCR *dcr)
+void DCR::mark_volume_in_error()
{
- DEVICE *dev = dcr->dev;
- Jmsg(dcr->jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
- dcr->VolumeName);
- dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
+ Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
+ VolumeName);
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
Dmsg0(150, "dir_update_vol_info. Set Error.\n");
- dir_update_volume_info(dcr, false);
+ dir_update_volume_info(this, false, false);
+ volume_unused(this);
+ Dmsg0(50, "set_unload\n");
+ dev->set_unload(); /* must get a new volume */
}
/*
* The Volume is not in the correct slot, so mark this
* Volume as not being in the Changer.
*/
-static void mark_volume_not_inchanger(DCR *dcr)
+void DCR::mark_volume_not_inchanger()
{
- JCR *jcr = dcr->jcr;
- DEVICE *dev = dcr->dev;
Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume \"%s\" not found in slot %d.\n"
" Setting InChanger to zero in catalog.\n"),
- dcr->VolCatInfo.VolCatName, dcr->VolCatInfo.Slot);
- dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
- dcr->VolCatInfo.InChanger = false;
+ getVolCatName(), VolCatInfo.Slot);
+ dev->VolCatInfo = VolCatInfo; /* structure assignment */
+ VolCatInfo.InChanger = false;
dev->VolCatInfo.InChanger = false;
Dmsg0(400, "update vol info in mount\n");
- dir_update_volume_info(dcr, true); /* set new status */
+ dir_update_volume_info(this, true, false); /* set new status */
}
/*
* Either because we are going to hang a new volume, or because
* of explicit user request, we release the current volume.
*/
-void release_volume(DCR *dcr)
+void DCR::release_volume()
{
- JCR *jcr = dcr->jcr;
- DEVICE *dev = dcr->dev;
- if (dcr->WroteVol) {
+ unload_autochanger(this, -1);
+
+ if (WroteVol) {
Jmsg0(jcr, M_ERROR, 0, _("Hey!!!!! WroteVol non-zero !!!!!\n"));
- Dmsg0(190, "Hey!!!!! WroteVol non-zero !!!!!\n");
+ Pmsg0(190, "Hey!!!!! WroteVol non-zero !!!!!\n");
}
/*
* First erase all memory of the current volume
dev->block_num = dev->file = 0;
dev->EndBlock = dev->EndFile = 0;
memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
- memset(&dcr->VolCatInfo, 0, sizeof(dcr->VolCatInfo));
dev->clear_volhdr();
/* Force re-read of label */
dev->clear_labeled();
dev->clear_read();
dev->clear_append();
dev->label_type = B_BACULA_LABEL;
- dcr->VolumeName[0] = 0;
+ VolumeName[0] = 0;
if (dev->is_open() && (!dev->is_tape() || !dev->has_cap(CAP_ALWAYSOPEN))) {
dev->close();
Dmsg0(190, "release_volume\n");
}
+/*
+ * Insanity check
+ *
+ * Check to see if the tape position as defined by the OS is
+ * the same as our concept. If it is not,
+ * it means the user has probably manually rewound the tape.
+ * Note, we check only if num_writers == 0, but this code will
+ * also work fine for any number of writers. If num_writers > 0,
+ * we probably should cancel all jobs using this device, or
+ * perhaps even abort the SD, or at a minimum, mark the tape
+ * in error. Another strategy with num_writers == 0, would be
+ * to rewind the tape and do a new eod() request.
+ */
+bool DCR::is_tape_position_ok()
+{
+ if (dev->is_tape() && dev->num_writers == 0) {
+ int32_t file = dev->get_os_tape_file();
+ if (file >= 0 && file != (int32_t)dev->get_file()) {
+ Jmsg(jcr, M_ERROR, 0, _("Invalid tape position on volume \"%s\""
+ " on device %s. Expected %d, got %d\n"),
+ dev->VolHdr.VolumeName, dev->print_name(), dev->get_file(), file);
+ /*
+ * If the current file is greater than zero, it means we probably
+ * have some bad count of EOF marks, so mark tape in error. Otherwise
+ * the operator might have moved the tape, so we just release it
+ * and try again.
+ */
+ if (file > 0) {
+ mark_volume_in_error();
+ }
+ release_volume();
+ return false;
+ }
+ }
+ return true;
+}
+
+
/*
* If we are reading, we come here at the end of the tape
* and see if there are more volumes to be mounted.
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
Dmsg2(90, "NumReadVolumes=%d CurReadVolume=%d\n", jcr->NumReadVolumes, jcr->CurReadVolume);
+
+ volume_unused(dcr); /* release current volume */
/*
* End Of Tape -- mount next Volume (if another specified)
*/
projects / bacula / bacula / blobdiff