* Version $Id$
*/
/*
- Copyright (C) 2000, 2001, 2002 Kern Sibbald and John Walker
+ Copyright (C) 2000-2003 Kern Sibbald and John Walker
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
#include "stored.h" /* pull in Storage Deamon headers */
/* Forward referenced functions */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd);
/*
{
int recycle, ask, retry = 0, autochanger;
- Dmsg0(190, "Enter mount_next_volume()\n");
+ Dmsg0(100, "Enter mount_next_volume()\n");
mount_next_vol:
if (retry++ > 5) {
- Jmsg(jcr, M_FATAL, 0, _("Too many errors on device %s.\n"), dev_name(dev));
+ Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
+ dev_name(dev));
return 0;
}
- if (job_cancelled(jcr)) {
- Jmsg(jcr, M_FATAL, 0, _("Job cancelled.\n"));
+ if (job_canceled(jcr)) {
+ Jmsg(jcr, M_FATAL, 0, _("Job canceled.\n"));
return 0;
}
recycle = ask = autochanger = 0;
if (release) {
- Dmsg0(500, "mount_next_volume release=1\n");
- /*
- * First erase all memory of the current volume
- */
- dev->block_num = 0;
- dev->file = 0;
- dev->LastBlockNumWritten = 0;
- memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
- memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
- dev->state &= ~ST_LABEL; /* label not yet read */
- jcr->VolumeName[0] = 0;
-
- if (!dev_is_tape(dev) || !(dev->capabilities & CAP_ALWAYSOPEN)) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
- offline_dev(dev);
- }
- close_dev(dev);
- }
-
- /* If we have not closed the device, then at least rewind the tape */
- if (dev->state & ST_OPENED) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
- offline_dev(dev);
- }
- if (!rewind_dev(dev)) {
- Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- }
- }
+ Dmsg0(100, "mount_next_volume release=1\n");
+ release_volume(jcr, dev);
ask = 1; /* ask operator to mount tape */
}
/*
* Get Director's idea of what tape we should have mounted.
*/
- if (!dir_find_next_appendable_volume(jcr)) {
- ask = 1; /* we must ask */
+ if (!dir_find_next_appendable_volume(jcr) &&
+ !dir_ask_sysop_to_mount_next_volume(jcr, dev)) {
+ return 0;
}
Dmsg2(100, "After find_next_append. Vol=%s Slot=%d\n",
- jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
- release = 1; /* release if we "recurse" */
+ jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
/*
* Get next volume and ready it for append
dev->state &= ~(ST_APPEND|ST_READ|ST_EOT|ST_WEOT|ST_EOF);
- jcr->VolFirstFile = jcr->JobFiles; /* first update of Vol FileIndex */
for ( ;; ) {
- autochanger = autoload_device(jcr, dev, 1);
- if (autochanger) {
- ask = 0; /* if autochange no need to ask sysop */
+ int vol_label_status;
+ autochanger = autoload_device(jcr, dev, 1, NULL);
+
+ /*
+ * If we autochanged to correct Volume or (we have not just
+ * released the Volume AND we can automount) we go ahead
+ * and read the label. If there is no tape in the drive,
+ * we will err, recurse and ask the operator the next time.
+ */
+ if (autochanger || (!release && dev_is_tape(dev) && dev_cap(dev, CAP_AUTOMOUNT))) {
+ ask = 0; /* don't ask SYSOP this time */
}
+ release = 1; /* release next time if we "recurse" */
+
+ask_again:
if (ask && !dir_ask_sysop_to_mount_next_volume(jcr, dev)) {
+ Dmsg0(100, "Error return ask_sysop ...\n");
return 0; /* error return */
}
- Dmsg1(200, "want vol=%s\n", jcr->VolumeName);
+ Dmsg1(100, "want vol=%s\n", jcr->VolumeName);
/* Open device */
- for ( ; !(dev->state & ST_OPENED); ) {
- if (open_dev(dev, jcr->VolCatInfo.VolCatName, READ_WRITE) < 0) {
- if (dev->dev_errno == EAGAIN || dev->dev_errno == EBUSY) {
- sleep(30);
- }
+ if (!(dev->state & ST_OPENED)) {
+ int mode;
+ if (dev_cap(dev, CAP_STREAM)) {
+ mode = OPEN_WRITE_ONLY;
+ } else {
+ mode = OPEN_READ_WRITE;
+ }
+ if (open_dev(dev, jcr->VolCatInfo.VolCatName, mode) < 0) {
Jmsg2(jcr, M_FATAL, 0, _("Unable to open device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
return 0;
* Now make sure we have the right tape mounted
*/
read_volume:
- switch (read_dev_volume_label(jcr, dev, block)) {
- case VOL_OK:
- Dmsg1(500, "Vol OK name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
- if (strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0) {
- recycle = 1;
- }
- break; /* got it */
- case VOL_NAME_ERROR:
- Dmsg1(500, "Vol NAME Error Name=%s\n", jcr->VolumeName);
- /* Check if we can accept this as an anonymous volume */
- strcpy(jcr->VolumeName, dev->VolHdr.VolName);
- if (!dev->capabilities & CAP_ANONVOLS || !dir_get_volume_info(jcr, 1)) {
+ /*
+ * If we are writing to a stream device, ASSUME the volume label
+ * is correct.
+ */
+ if (dev_cap(dev, CAP_STREAM)) {
+ vol_label_status = VOL_OK;
+ create_volume_label(dev, jcr->VolumeName);
+ dev->VolHdr.LabelType = PRE_LABEL;
+ } else {
+ vol_label_status = read_dev_volume_label(jcr, dev, block);
+ }
+ /*
+ * At this point, dev->VolCatInfo has what is in the drive, if anything,
+ * and jcr->VolCatInfo has what the Director wants.
+ */
+ switch (vol_label_status) {
+ case VOL_OK:
+ Dmsg1(100, "Vol OK name=%s\n", jcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ if (strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0) {
+ recycle = 1;
+ }
+ break; /* got a Volume */
+ case VOL_NAME_ERROR:
+ VOLUME_CAT_INFO VolCatInfo;
+
+ Dmsg1(100, "Vol NAME Error Name=%s\n", jcr->VolumeName);
+ /*
+ * OK, we got a different volume mounted. First save the
+ * requested Volume info (jcr) structure, then query if
+ * this volume is really OK. If not, put back the desired
+ * volume name and continue.
+ */
+ memcpy(&VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ /* Check if this is a valid Volume in the pool */
+ pm_strcpy(&jcr->VolumeName, dev->VolHdr.VolName);
+ if (!dir_get_volume_info(jcr, GET_VOL_INFO_FOR_WRITE)) {
+ Mmsg(&jcr->errmsg, _("Director wanted Volume \"%s\".\n"
+ " Current Volume \"%s\" not acceptable because:\n"
+ " %s"),
+ VolCatInfo.VolCatName, dev->VolHdr.VolName,
+ jcr->dir_bsock->msg);
+ /* Restore desired volume name, note device info out of sync */
+ memcpy(&jcr->VolCatInfo, &VolCatInfo, sizeof(jcr->VolCatInfo));
+ goto mount_error;
+ }
+ Dmsg1(100, "want new name=%s\n", jcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ break; /* got a Volume */
+
+ case VOL_NO_LABEL:
+ case VOL_IO_ERROR:
+ Dmsg1(500, "Vol NO_LABEL or IO_ERROR name=%s\n", jcr->VolumeName);
+ /* If permitted, create a label */
+ if (dev_cap(dev, CAP_LABEL)) {
+ Dmsg0(100, "Create volume label\n");
+ if (!write_volume_label_to_dev(jcr, (DEVRES *)dev->device, jcr->VolumeName,
+ jcr->pool_name)) {
+ Dmsg0(100, "!write_vol_label\n");
goto mount_next_vol;
}
- Dmsg1(200, "want new name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
- break;
-
- case VOL_NO_LABEL:
- case VOL_IO_ERROR:
- Dmsg1(500, "Vol NO_LABEL or IO_ERROR name=%s\n", jcr->VolumeName);
- /* If permitted, create a label */
- if (dev->capabilities & CAP_LABEL) {
- Dmsg0(190, "Create volume label\n");
- if (!write_volume_label_to_dev(jcr, (DEVRES *)dev->device, jcr->VolumeName,
- jcr->pool_name)) {
- goto mount_next_vol;
- }
- Jmsg(jcr, M_INFO, 0, _("Created Volume label %s on device %s.\n"),
- jcr->VolumeName, dev_name(dev));
- goto read_volume; /* read label we just wrote */
- }
- /* NOTE! Fall-through wanted. */
- default:
- /* Send error message */
- Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
- if (autochanger) {
- Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume %s not found in slot %d.\n\
- Setting slot to zero in catalog.\n"),
- jcr->VolumeName, jcr->VolCatInfo.Slot);
- jcr->VolCatInfo.Slot = 0; /* invalidate slot */
- dir_update_volume_info(jcr, &jcr->VolCatInfo, 1); /* set slot */
- }
- goto mount_next_vol;
+ Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
+ jcr->VolumeName, dev_name(dev));
+ goto read_volume; /* read label we just wrote */
+ }
+ /* NOTE! Fall-through wanted. */
+ default:
+mount_error:
+ /* Send error message */
+ Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
+ Dmsg0(100, "Default\n");
+ ask = 1;
+ goto ask_again;
}
break;
}
dev->VolHdr.LabelType = VOL_LABEL; /* set Volume label */
write_volume_label_to_block(jcr, dev, block);
/*
- * Write the block now to ensure we have write permission.
+ * If we are not dealing with a streaming device,
+ * write the block now to ensure we have write permission.
* It is better to find out now rather than later.
*/
- dev->VolCatInfo.VolCatBytes = 0;
- if (!rewind_dev(dev)) {
- Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- }
- if (recycle) {
- if (!truncate_dev(dev)) {
- Jmsg2(jcr, M_WARNING, 0, _("Truncate error on device %s. ERR=%s\n"),
+ if (!dev_cap(dev, CAP_STREAM)) {
+ dev->VolCatInfo.VolCatBytes = 0;
+ if (!rewind_dev(dev)) {
+ Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
}
+ if (recycle) {
+ if (!truncate_dev(dev)) {
+ Jmsg2(jcr, M_WARNING, 0, _("Truncate error on device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ }
+ }
+ /* Attempt write to check write permission */
+ if (!write_block_to_dev(jcr, dev, block)) {
+ Jmsg2(jcr, M_ERROR, 0, _("Unable to write device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ goto mount_next_vol;
+ }
+ if (!rewind_dev(dev)) {
+ Jmsg2(jcr, M_ERROR, 0, _("Unable to rewind device %s. ERR=%s\n"),
+ dev_name(dev), strerror_dev(dev));
+ goto mount_next_vol;
+ }
+
+ /* Recreate a correct volume label and return it in the block */
+ write_volume_label_to_block(jcr, dev, block);
}
- if (!write_block_to_dev(dev, block)) {
- Jmsg2(jcr, M_ERROR, 0, _("Unable to write device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- goto mount_next_vol;
- }
- if (!rewind_dev(dev)) {
- Jmsg2(jcr, M_ERROR, 0, _("Unable to rewind device %s. ERR=%s\n"),
- dev_name(dev), strerror_dev(dev));
- goto mount_next_vol;
- }
- /* Recreate a correct volume label and return it in the block */
- write_volume_label_to_block(jcr, dev, block);
- dev->VolCatInfo.VolCatJobs = 1;
- dev->VolCatInfo.VolCatFiles = 1;
+ /* Set or reset Volume statistics */
+ dev->VolCatInfo.VolCatJobs = 0;
+ dev->VolCatInfo.VolCatFiles = 0;
dev->VolCatInfo.VolCatErrors = 0;
- dev->VolCatInfo.VolCatBlocks = 1;
+ dev->VolCatInfo.VolCatBlocks = 0;
+ dev->VolCatInfo.VolCatRBytes = 0;
if (recycle) {
dev->VolCatInfo.VolCatMounts++;
dev->VolCatInfo.VolCatRecycles++;
dev->VolCatInfo.VolCatReads = 1;
}
strcpy(dev->VolCatInfo.VolCatStatus, "Append");
- Dmsg0(100, "dir_update_vol_info. Set Append\n");
+ Dmsg0(200, "dir_update_vol_info. Set Append\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 1); /* indicate doing relabel */
if (recycle) {
- Jmsg(jcr, M_INFO, 0, _("Recycled volume %s on device %s, all previous data lost.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Recycled volume \"%s\" on device %s, all previous data lost.\n"),
jcr->VolumeName, dev_name(dev));
} else {
- Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume %s on device %s\n"),
+ Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume \"%s\" on device %s\n"),
jcr->VolumeName, dev_name(dev));
}
* just now putting it into append mode.
*/
Dmsg0(200, "Device previously written, moving to end of data\n");
- Jmsg(jcr, M_INFO, 0, _("Volume %s previously written, moving to end of data.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
jcr->VolumeName);
if (!eod_dev(dev)) {
Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
- Jmsg(jcr, M_INFO, 0, _("Marking Volume %s in Error in Catalog.\n"),
+ Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
jcr->VolumeName);
strcpy(dev->VolCatInfo.VolCatStatus, "Error");
- Dmsg0(100, "dir_update_vol_info. Set Error.\n");
+ Dmsg0(200, "dir_update_vol_info. Set Error.\n");
dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
goto mount_next_vol;
}
/* *****FIXME**** we should do some checking for files too */
if (dev_is_tape(dev)) {
- Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume at file=%d.\n"), dev_file(dev));
/*
* Check if we are positioned on the tape at the same place
* that the database says we should be.
*/
- if (dev->VolCatInfo.VolCatFiles != dev_file(dev) + 1) {
- /* ****FIXME**** this should refuse to write on tape */
- Jmsg(jcr, M_ERROR, 0, _("Hey! Num files mismatch! Volume=%d Catalog=%d\n"),
- dev_file(dev)+1, dev->VolCatInfo.VolCatFiles);
+ if (dev->VolCatInfo.VolCatFiles == dev_file(dev)) {
+ Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume at file=%d.\n"),
+ dev_file(dev));
+ } else {
+ Jmsg(jcr, M_ERROR, 0, _("I canot write on this volume because:\n\
+The number of files mismatch! Volume=%u Catalog=%u\n"),
+ dev_file(dev), dev->VolCatInfo.VolCatFiles);
+ strcpy(dev->VolCatInfo.VolCatStatus, "Error");
+ Dmsg0(200, "dir_update_vol_info. Set Error.\n");
+ dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
+ goto mount_next_vol;
}
}
- /* Update Volume Info -- will be written at end of Job */
dev->VolCatInfo.VolCatMounts++; /* Update mounts */
- dev->VolCatInfo.VolCatJobs++;
+ Dmsg1(200, "update volinfo mounts=%d\n", dev->VolCatInfo.VolCatMounts);
+ dir_update_volume_info(jcr, &dev->VolCatInfo, 0);
/* Return an empty block */
empty_block(block); /* we used it for reading so set for write */
}
* End Of Tape -- mount next Volume (if another specified)
*/
if (jcr->NumVolumes > 1 && jcr->CurVolume < jcr->NumVolumes) {
- VOL_LIST *vol = jcr->VolList;
- /* Find next Volume */
- jcr->CurVolume++;
- for (int i=1; i<jcr->CurVolume; i++) {
- vol = vol->next;
- }
- pm_strcpy(&jcr->VolumeName, vol->VolumeName);
- Dmsg1(400, "There is another volume %s.\n", jcr->VolumeName);
-
close_dev(dev);
dev->state &= ~ST_READ;
if (!acquire_device_for_read(jcr, dev, block)) {
- Emsg2(M_FATAL, 0, "Cannot open Dev=%s, Vol=%s\n", dev_name(dev),
+ Jmsg2(jcr, M_FATAL, 0, "Cannot open Dev=%s, Vol=%s\n", dev_name(dev),
jcr->VolumeName);
return 0;
}
}
/*
- * Called here to do an autoload using the autochanger, if
- * configured, and if a Slot has been defined for this Volume.
- * On success this routine loads the indicated tape, but the
- * label is not read, so it must be verified.
- *
- * Returns: 1 on success
- * 0 on failure
+ * Either because we are going to hang a new volume, or because
+ * of explicit user request, we release the current volume.
*/
-int autoload_device(JCR *jcr, DEVICE *dev, int writing)
+void release_volume(JCR *jcr, DEVICE *dev)
{
- int slot = jcr->VolCatInfo.Slot;
- int rtn_stat = 0;
-
- /*
- * Handle autoloaders here. If we cannot autoload it, we
- * will return FALSE to ask the sysop.
- */
- if (writing && dev->capabilities && CAP_AUTOCHANGER && slot <= 0) {
- if (dir_find_next_appendable_volume(jcr)) {
- slot = jcr->VolCatInfo.Slot;
- }
- }
- Dmsg1(100, "Want changer slot=%d\n", slot);
-
- if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
- uint32_t timeout = jcr->device->max_changer_wait;
- POOLMEM *changer, *results;
- int status, loaded;
-
- results = get_pool_memory(PM_MESSAGE);
- changer = get_pool_memory(PM_FNAME);
- /* Find out what is loaded, zero means device is unloaded */
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
- "loaded");
- status = run_program(changer, timeout, results);
- if (status == 0) {
- loaded = atoi(results);
- } else {
- loaded = -1; /* force unload */
- }
- Dmsg1(100, "loaded=%s\n", results);
-
- /* If bad status or tape we want is not loaded, load it. */
- if (status != 0 || loaded != slot) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
- offline_dev(dev);
- }
- /* We are going to load a new tape, so close the device */
- force_close_dev(dev);
- if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "unload");
- status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
- }
- /*
- * Load the desired cassette
- */
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "load");
- status = run_program(changer, timeout, NULL);
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
- }
- free_pool_memory(changer);
- free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
- if (status == 0) { /* did we succeed? */
- rtn_stat = 1; /* tape loaded by changer */
- }
+ if (jcr->WroteVol) {
+ Jmsg0(jcr, M_ERROR, 0, "Hey!!!!! WroteVol non-zero !!!!!\n");
+ }
+ /*
+ * First erase all memory of the current volume
+ */
+ dev->block_num = dev->file = 0;
+ dev->EndBlock = dev->EndFile = 0;
+ memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
+ memset(&jcr->VolCatInfo, 0, sizeof(jcr->VolCatInfo));
+ memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
+ dev->state &= ~ST_LABEL; /* label not yet read */
+ jcr->VolumeName[0] = 0;
+
+ if (!dev_is_tape(dev) || !dev_cap(dev, CAP_ALWAYSOPEN)) {
+ offline_or_rewind_dev(dev);
+ close_dev(dev);
}
- return rtn_stat;
-}
-
-
-
-/*
- * Edit codes into ChangerCommand
- * %% = %
- * %a = archive device name
- * %c = changer device name
- * %f = Client's name
- * %j = Job name
- * %o = command
- * %s = Slot base 0
- * %S = Slot base 1
- * %v = Volume name
- *
- *
- * omsg = edited output message
- * imsg = input string containing edit codes (%x)
- * cmd = command string (load, unload, ...)
- *
- */
-static char *edit_device_codes(JCR *jcr, char *omsg, char *imsg, char *cmd)
-{
- char *p;
- const char *str;
- char add[20];
-
- *omsg = 0;
- Dmsg1(200, "edit_device_codes: %s\n", imsg);
- for (p=imsg; *p; p++) {
- if (*p == '%') {
- switch (*++p) {
- case '%':
- str = "%";
- break;
- case 'a':
- str = jcr->device->dev->dev_name;
- break;
- case 'c':
- str = NPRT(jcr->device->changer_name);
- break;
- case 'o':
- str = NPRT(cmd);
- break;
- case 's':
- sprintf(add, "%d", jcr->VolCatInfo.Slot - 1);
- str = add;
- break;
- case 'S':
- sprintf(add, "%d", jcr->VolCatInfo.Slot);
- str = add;
- break;
- case 'j': /* Job name */
- str = jcr->Job;
- break;
- case 'v':
- str = NPRT(jcr->VolumeName);
- break;
- case 'f':
- str = NPRT(jcr->client_name);
- break;
- default:
- add[0] = '%';
- add[1] = *p;
- add[2] = 0;
- str = add;
- break;
- }
- } else {
- add[0] = *p;
- add[1] = 0;
- str = add;
- }
- Dmsg1(200, "add_str %s\n", str);
- pm_strcat(&omsg, (char *)str);
- Dmsg1(200, "omsg=%s\n", omsg);
+ /* If we have not closed the device, then at least rewind the tape */
+ if (dev->state & ST_OPENED) {
+ offline_or_rewind_dev(dev);
}
- return omsg;
}
projects / bacula / bacula / blobdiff