jcr->VolFirstFile = jcr->JobFiles; /* first update of Vol FileIndex */
for ( ;; ) {
- int slot = jcr->VolCatInfo.Slot;
-
- /*
- * Handle autoloaders here. If we cannot autoload it, we
- * will fall through to ask the sysop.
- */
- if (dev->capabilities && CAP_AUTOCHANGER && slot <= 0) {
- if (dir_find_next_appendable_volume(jcr)) {
- slot = jcr->VolCatInfo.Slot;
- }
+ autochanger = autoload_device(jcr, dev, 1);
+ if (autochanger) {
+ ask = 0; /* if autochange no need to ask sysop */
}
- Dmsg1(100, "Want changer slot=%d\n", slot);
-
- if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
- uint32_t timeout = jcr->device->max_changer_wait;
- POOLMEM *changer, *results;
- int status, loaded;
-
- results = get_pool_memory(PM_MESSAGE);
- changer = get_pool_memory(PM_FNAME);
- /* Find out what is loaded */
- changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
- "loaded");
- status = run_program(changer, timeout, results);
- if (status == 0) {
- loaded = atoi(results);
- } else {
- loaded = -1; /* force unload */
- }
- Dmsg1(100, "loaded=%s\n", results);
-
- /* If bad status or tape we want is not loaded, load it. */
- if (status != 0 || loaded != slot) {
- if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
- offline_dev(dev);
- }
- /* We are going to load a new tape, so close the device */
- force_close_dev(dev);
- if (loaded != 0) { /* must unload drive */
- Dmsg0(100, "Doing changer unload.\n");
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "unload");
- status = run_program(changer, timeout, NULL);
- Dmsg1(100, "unload status=%d\n", status);
- }
- /*
- * Load the desired cassette
- */
- Dmsg1(100, "Doing changer load slot %d\n", slot);
- Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
- slot);
- changer = edit_device_codes(jcr, changer,
- jcr->device->changer_command, "load");
- status = run_program(changer, timeout, NULL);
- Dmsg2(100, "load slot %d status=%d\n", slot, status);
- }
- free_pool_memory(changer);
- free_pool_memory(results);
- Dmsg1(100, "After changer, status=%d\n", status);
- if (status == 0) { /* did we succeed? */
- ask = 0; /* yes, got vol, no need to ask sysop */
- autochanger = 1; /* tape loaded by changer */
- }
- }
-
if (ask && !dir_ask_sysop_to_mount_next_volume(jcr, dev)) {
return 0; /* error return */
Dmsg1(500, "Vol NAME Error Name=%s\n", jcr->VolumeName);
/* Check if we can accept this as an anonymous volume */
strcpy(jcr->VolumeName, dev->VolHdr.VolName);
- if (!dev->capabilities & CAP_ANONVOLS || !dir_get_volume_info(jcr)) {
+ if (!dev->capabilities & CAP_ANONVOLS || !dir_get_volume_info(jcr, 1)) {
goto mount_next_vol;
}
Dmsg1(200, "want new name=%s\n", jcr->VolumeName);
/* NOTE! Fall-through wanted. */
default:
/* Send error message */
- Jmsg(jcr, M_WARNING, 0, "%s", jcr->errmsg);
+ Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
if (autochanger) {
Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume %s not found in slot %d.\n\
Setting slot to zero in catalog.\n"),
return 0;
}
+/*
+ * Called here to do an autoload using the autochanger, if
+ * configured, and if a Slot has been defined for this Volume.
+ * On success this routine loads the indicated tape, but the
+ * label is not read, so it must be verified.
+ *
+ * Returns: 1 on success
+ * 0 on failure
+ */
+int autoload_device(JCR *jcr, DEVICE *dev, int writing)
+{
+ int slot = jcr->VolCatInfo.Slot;
+ int rtn_stat = 0;
+
+ /*
+ * Handle autoloaders here. If we cannot autoload it, we
+ * will return FALSE to ask the sysop.
+ */
+ if (writing && dev->capabilities && CAP_AUTOCHANGER && slot <= 0) {
+ if (dir_find_next_appendable_volume(jcr)) {
+ slot = jcr->VolCatInfo.Slot;
+ }
+ }
+ Dmsg1(100, "Want changer slot=%d\n", slot);
+
+ if (slot > 0 && jcr->device->changer_name && jcr->device->changer_command) {
+ uint32_t timeout = jcr->device->max_changer_wait;
+ POOLMEM *changer, *results;
+ int status, loaded;
+
+ results = get_pool_memory(PM_MESSAGE);
+ changer = get_pool_memory(PM_FNAME);
+
+ /* Find out what is loaded, zero means device is unloaded */
+ changer = edit_device_codes(jcr, changer, jcr->device->changer_command,
+ "loaded");
+ status = run_program(changer, timeout, results);
+ if (status == 0) {
+ loaded = atoi(results);
+ } else {
+ loaded = -1; /* force unload */
+ }
+ Dmsg1(100, "loaded=%s\n", results);
+
+ /* If bad status or tape we want is not loaded, load it. */
+ if (status != 0 || loaded != slot) {
+ if (dev->capabilities & CAP_OFFLINEUNMOUNT) {
+ offline_dev(dev);
+ }
+ /* We are going to load a new tape, so close the device */
+ force_close_dev(dev);
+ if (loaded != 0) { /* must unload drive */
+ Dmsg0(100, "Doing changer unload.\n");
+ Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"unload\" command.\n"));
+ changer = edit_device_codes(jcr, changer,
+ jcr->device->changer_command, "unload");
+ status = run_program(changer, timeout, NULL);
+ Dmsg1(100, "unload status=%d\n", status);
+ }
+ /*
+ * Load the desired cassette
+ */
+ Dmsg1(100, "Doing changer load slot %d\n", slot);
+ Jmsg(jcr, M_INFO, 0, _("Issuing autochanger \"load slot %d\" command.\n"),
+ slot);
+ changer = edit_device_codes(jcr, changer,
+ jcr->device->changer_command, "load");
+ status = run_program(changer, timeout, NULL);
+ Dmsg2(100, "load slot %d status=%d\n", slot, status);
+ }
+ free_pool_memory(changer);
+ free_pool_memory(results);
+ Dmsg1(100, "After changer, status=%d\n", status);
+ if (status == 0) { /* did we succeed? */
+ rtn_stat = 1; /* tape loaded by changer */
+ }
+ }
+ return rtn_stat;
+}
+
+
/*
* Edit codes into ChangerCommand
projects / bacula / bacula / blobdiff