if (!dev_is_tape(dev) || !dev_cap(dev, CAP_ALWAYSOPEN)) {
if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
offline_dev(dev);
+ /*
+ * Note, this rewind probably should not be here (it wasn't
+ * in prior versions of Bacula), but on FreeBSD, this is
+ * needed in the case the tape was "frozen" due to an error
+ * such as backspacing after writing and EOF. If it is not
+ * done, all future references to the drive get and I/O error.
+ */
} else if (!rewind_dev(dev)) {
Jmsg2(jcr, M_WARNING, 0, _("Rewind error on device %s. ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
/*
* Get Director's idea of what tape we should have mounted.
*/
- if (!dir_find_next_appendable_volume(jcr)) {
- ask = 1; /* we must ask */
- Dmsg0(100, "did not find next volume. Must ask.\n");
+ if (!dir_find_next_appendable_volume(jcr) &&
+ !dir_ask_sysop_to_mount_next_volume(jcr, dev)) {
+ return 0;
}
Dmsg2(100, "After find_next_append. Vol=%s Slot=%d\n",
jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
} else {
vol_label_status = read_dev_volume_label(jcr, dev, block);
}
+ /*
+ * At this point, dev->VolCatInfo has what is in the drive, if anything,
+ * and jcr->VolCatInfo has what the Director wants.
+ */
switch (vol_label_status) {
- case VOL_OK:
- Dmsg1(100, "Vol OK name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
- if (strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0) {
- recycle = 1;
- }
- break; /* got it */
- case VOL_NAME_ERROR:
- Dmsg1(100, "Vol NAME Error Name=%s\n", jcr->VolumeName);
- /*
- * OK, we got a different volume mounted. First save the
- * requested Volume info in the dev structure, then query if
- * this volume is really OK. If not, put back the desired
- * volume name and continue.
- */
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
- /* Check if this is a valid Volume in the pool */
- pm_strcpy(&jcr->VolumeName, dev->VolHdr.VolName);
- if (!dir_get_volume_info(jcr, 1)) {
- Mmsg(&jcr->errmsg, _("Wanted Volume \"%s\".\n"
- " Current Volume \"%s\" not acceptable because:\n"
- " %s"),
- dev->VolCatInfo.VolCatName, dev->VolHdr.VolName,
- jcr->dir_bsock->msg);
- /* Restore desired volume name, note device info out of sync */
- memcpy(&jcr->VolCatInfo, &dev->VolCatInfo, sizeof(jcr->VolCatInfo));
- goto mount_error;
- }
- Dmsg1(100, "want new name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
- break;
+ case VOL_OK:
+ Dmsg1(100, "Vol OK name=%s\n", jcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ if (strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0) {
+ recycle = 1;
+ }
+ break; /* got a Volume */
+ case VOL_NAME_ERROR:
+ VOLUME_CAT_INFO VolCatInfo;
- case VOL_NO_LABEL:
- case VOL_IO_ERROR:
- Dmsg1(500, "Vol NO_LABEL or IO_ERROR name=%s\n", jcr->VolumeName);
- /* If permitted, create a label */
- if (dev_cap(dev, CAP_LABEL)) {
- Dmsg0(100, "Create volume label\n");
- if (!write_volume_label_to_dev(jcr, (DEVRES *)dev->device, jcr->VolumeName,
- jcr->pool_name)) {
- Dmsg0(100, "!write_vol_label\n");
- goto mount_next_vol;
- }
- Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
- jcr->VolumeName, dev_name(dev));
- goto read_volume; /* read label we just wrote */
- }
- /* NOTE! Fall-through wanted. */
- default:
+ Dmsg1(100, "Vol NAME Error Name=%s\n", jcr->VolumeName);
+ /*
+ * OK, we got a different volume mounted. First save the
+ * requested Volume info (jcr) structure, then query if
+ * this volume is really OK. If not, put back the desired
+ * volume name and continue.
+ */
+ memcpy(&VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ /* Check if this is a valid Volume in the pool */
+ pm_strcpy(&jcr->VolumeName, dev->VolHdr.VolName);
+ if (!dir_get_volume_info(jcr, 1)) {
+ Mmsg(&jcr->errmsg, _("Director wanted Volume \"%s\".\n"
+ " Current Volume \"%s\" not acceptable because:\n"
+ " %s"),
+ VolCatInfo.VolCatName, dev->VolHdr.VolName,
+ jcr->dir_bsock->msg);
+ /* Restore desired volume name, note device info out of sync */
+ memcpy(&jcr->VolCatInfo, &VolCatInfo, sizeof(jcr->VolCatInfo));
+ goto mount_error;
+ }
+ Dmsg1(100, "want new name=%s\n", jcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ break; /* got a Volume */
+
+ case VOL_NO_LABEL:
+ case VOL_IO_ERROR:
+ Dmsg1(500, "Vol NO_LABEL or IO_ERROR name=%s\n", jcr->VolumeName);
+ /* If permitted, create a label */
+ if (dev_cap(dev, CAP_LABEL)) {
+ Dmsg0(100, "Create volume label\n");
+ if (!write_volume_label_to_dev(jcr, (DEVRES *)dev->device, jcr->VolumeName,
+ jcr->pool_name)) {
+ Dmsg0(100, "!write_vol_label\n");
+ goto mount_next_vol;
+ }
+ Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
+ jcr->VolumeName, dev_name(dev));
+ goto read_volume; /* read label we just wrote */
+ }
+ /* NOTE! Fall-through wanted. */
+ default:
mount_error:
- /* Send error message */
- Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
- if (autochanger) {
- Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume \"%s\" not found in slot %d.\n\
+ /* Send error message */
+ Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
+ if (autochanger) {
+ Jmsg(jcr, M_ERROR, 0, _("Autochanger Volume \"%s\" not found in slot %d.\n\
Setting slot to zero in catalog.\n"),
- jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
- jcr->VolCatInfo.Slot = 0; /* invalidate slot */
- Dmsg0(200, "update vol info in mount\n");
- dir_update_volume_info(jcr, &jcr->VolCatInfo, 1); /* set slot */
- }
- Dmsg0(100, "Default\n");
- goto mount_next_vol;
+ jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
+ jcr->VolCatInfo.Slot = 0; /* invalidate slot */
+ Dmsg0(200, "update vol info in mount\n");
+ dir_update_volume_info(jcr, &jcr->VolCatInfo, 1); /* set slot */
+ }
+ Dmsg0(100, "Default\n");
+ goto mount_next_vol;
}
break;
}
projects / bacula / bacula / blobdiff