#include "bacula.h" /* pull in global headers */
#include "stored.h" /* pull in Storage Deamon headers */
-static bool rewrite_volume_label(DCR *dcr, DEV_BLOCK *block, bool recycle);
+static bool rewrite_volume_label(DCR *dcr, bool recycle);
/*
* impossible to get the requested Volume.
*
*/
-bool mount_next_write_volume(DCR *dcr, DEV_BLOCK *block, bool release)
+bool mount_next_write_volume(DCR *dcr, bool release)
{
int retry = 0;
bool ask = false, recycle, autochanger;
int vol_label_status;
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
+ DEV_BLOCK *block = dcr->block;
Dmsg0(100, "Enter mount_next_volume()\n");
/* Ignore retry if this is poll request */
if (!dev->poll && retry++ > 4) {
/* Last ditch effort before giving up, force operator to respond */
- jcr->VolCatInfo.Slot = 0;
+ dcr->VolCatInfo.Slot = 0;
if (!dir_ask_sysop_to_mount_volume(dcr)) {
Jmsg(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
dev_name(dev));
recycle = false;
if (release) {
Dmsg0(100, "mount_next_volume release=1\n");
- release_volume(jcr, dev);
+ release_volume(dcr);
ask = true; /* ask operator to mount tape */
}
/*
* Get Director's idea of what tape we should have mounted.
- * in jcr->VolCatInfo
+ * in dcr->VolCatInfo
*/
Dmsg0(200, "Before dir_find_next_appendable_volume.\n");
while (!dir_find_next_appendable_volume(dcr)) {
return false;
}
Dmsg2(100, "After find_next_append. Vol=%s Slot=%d\n",
- jcr->VolCatInfo.VolCatName, jcr->VolCatInfo.Slot);
+ dcr->VolCatInfo.VolCatName, dcr->VolCatInfo.Slot);
/*
* Get next volume and ready it for append
ask = false;
} else {
autochanger = false;
- jcr->VolCatInfo.Slot = 0;
+ dcr->VolCatInfo.Slot = 0;
}
Dmsg1(100, "autoload_dev returns %d\n", autochanger);
/*
if (job_canceled(jcr)) {
return false;
}
- Dmsg1(100, "want vol=%s\n", jcr->VolumeName);
+ Dmsg1(100, "want vol=%s\n", dcr->VolumeName);
if (dev->poll && dev_cap(dev, CAP_CLOSEONPOLL)) {
force_close_dev(dev);
}
/* Ensure the device is open */
- if (!open_device(jcr, dev)) {
+ if (!open_device(dcr)) {
if (dev->poll) {
goto mount_next_vol;
} else {
*/
if (dev_cap(dev, CAP_STREAM)) {
vol_label_status = VOL_OK;
- create_volume_label(dev, jcr->VolumeName, "Default");
+ create_volume_label(dev, dcr->VolumeName, "Default");
dev->VolHdr.LabelType = PRE_LABEL;
} else {
- vol_label_status = read_dev_volume_label(jcr->dcr, block);
+ vol_label_status = read_dev_volume_label(dcr);
}
if (job_canceled(jcr)) {
return false;
}
- Dmsg2(100, "dirVol=%s dirStat=%s\n", jcr->VolumeName,
- jcr->VolCatInfo.VolCatStatus);
+ Dmsg2(100, "dirVol=%s dirStat=%s\n", dcr->VolumeName,
+ dcr->VolCatInfo.VolCatStatus);
/*
* At this point, dev->VolCatInfo has what is in the drive, if anything,
- * and jcr->VolCatInfo has what the Director wants.
+ * and dcr->VolCatInfo has what the Director wants.
*/
switch (vol_label_status) {
case VOL_OK:
- Dmsg1(100, "Vol OK name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(jcr->VolCatInfo));
+ Dmsg1(100, "Vol OK name=%s\n", dcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
break; /* got a Volume */
case VOL_NAME_ERROR:
/* If not removable, Volume is broken */
if (!dev_cap(dev, CAP_REM)) {
Jmsg(jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
- jcr->VolumeName, dev_name(dev));
- mark_volume_in_error(jcr, dev);
+ dcr->VolumeName, dev_name(dev));
+ mark_volume_in_error(dcr);
goto mount_next_vol;
}
- Dmsg1(100, "Vol NAME Error Name=%s\n", jcr->VolumeName);
+ Dmsg1(100, "Vol NAME Error Name=%s\n", dcr->VolumeName);
/* If polling and got a previous bad name, ignore it */
if (dev->poll && strcmp(dev->BadVolName, dev->VolHdr.VolName) == 0) {
ask = true;
Dmsg1(200, "Vol Name error supress due to poll. Name=%s\n",
- jcr->VolumeName);
+ dcr->VolumeName);
goto mount_next_vol;
}
/*
* this volume is really OK. If not, put back the desired
* volume name and continue.
*/
- memcpy(&VolCatInfo, &jcr->VolCatInfo, sizeof(VolCatInfo));
+ memcpy(&VolCatInfo, &dcr->VolCatInfo, sizeof(VolCatInfo));
/* Check if this is a valid Volume in the pool */
- pm_strcpy(&jcr->VolumeName, dev->VolHdr.VolName);
+ bstrncpy(dcr->VolumeName, dev->VolHdr.VolName, sizeof(dcr->VolumeName));
if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE)) {
bstrncpy(dev->BadVolName, dev->VolHdr.VolName, sizeof(dev->BadVolName));
Jmsg(jcr, M_WARNING, 0, _("Director wanted Volume \"%s\".\n"
VolCatInfo.VolCatName, dev->VolHdr.VolName,
jcr->dir_bsock->msg);
/* Restore desired volume name, note device info out of sync */
- memcpy(&jcr->VolCatInfo, &VolCatInfo, sizeof(jcr->VolCatInfo));
+ memcpy(&dcr->VolCatInfo, &VolCatInfo, sizeof(dcr->VolCatInfo));
ask = true;
goto mount_next_vol;
}
- Dmsg1(100, "want new name=%s\n", jcr->VolumeName);
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(dev->VolCatInfo));
+ Dmsg1(100, "want new name=%s\n", dcr->VolumeName);
+ memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
recycle = strcmp(dev->VolCatInfo.VolCatStatus, "Recycle") == 0;
break; /* got a Volume */
/*
* blank tape with the same name. For disk, we go ahead and
* label it anyway, because the OS insures that there is only
* one Volume with that name.
- * As noted above, at this point jcr->VolCatInfo has what
+ * As noted above, at this point dcr->VolCatInfo has what
* the Director wants and dev->VolCatInfo has info on the
* previous tape (or nothing).
*/
- if (dev_cap(dev, CAP_LABEL) && (jcr->VolCatInfo.VolCatBytes == 0 ||
- (!dev_is_tape(dev) && strcmp(jcr->VolCatInfo.VolCatStatus,
+ if (dev_cap(dev, CAP_LABEL) && (dcr->VolCatInfo.VolCatBytes == 0 ||
+ (!dev_is_tape(dev) && strcmp(dcr->VolCatInfo.VolCatStatus,
"Recycle") == 0))) {
Dmsg0(100, "Create volume label\n");
/* Create a new Volume label and write it to the device */
- if (!write_new_volume_label_to_dev(jcr->dcr, jcr->VolumeName,
- jcr->pool_name)) {
+ if (!write_new_volume_label_to_dev(dcr, dcr->VolumeName,
+ dcr->pool_name)) {
Dmsg0(100, "!write_vol_label\n");
goto mount_next_vol;
}
Dmsg0(100, "dir_update_vol_info. Set Append\n");
/* Copy Director's info into the device info */
- memcpy(&dev->VolCatInfo, &jcr->VolCatInfo, sizeof(dev->VolCatInfo));
+ memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
dir_update_volume_info(dcr, true); /* indicate tape labeled */
Jmsg(jcr, M_INFO, 0, _("Labeled new Volume \"%s\" on device %s.\n"),
- jcr->VolumeName, dev_name(dev));
+ dcr->VolumeName, dev_name(dev));
goto read_volume; /* read label we just wrote */
}
/* If not removable, Volume is broken */
if (!dev_cap(dev, CAP_REM)) {
Jmsg(jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
- jcr->VolumeName, dev_name(dev));
- mark_volume_in_error(jcr, dev);
+ dcr->VolumeName, dev_name(dev));
+ mark_volume_in_error(dcr);
goto mount_next_vol;
}
/* NOTE! Fall-through wanted. */
* If the tape is marked as Recycle, we rewrite the label.
*/
if (dev->VolHdr.LabelType == PRE_LABEL || recycle) {
- if (!rewrite_volume_label(jcr->dcr, block, recycle)) {
+ if (!rewrite_volume_label(dcr, recycle)) {
goto mount_next_vol;
}
} else {
*/
Dmsg0(200, "Device previously written, moving to end of data\n");
Jmsg(jcr, M_INFO, 0, _("Volume \"%s\" previously written, moving to end of data.\n"),
- jcr->VolumeName);
+ dcr->VolumeName);
if (!eod_dev(dev)) {
Jmsg(jcr, M_ERROR, 0, _("Unable to position to end of data on device \"%s\". ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
- mark_volume_in_error(jcr, dev);
+ mark_volume_in_error(dcr);
goto mount_next_vol;
}
/* *****FIXME**** we should do some checking for files too */
*/
if (dev->VolCatInfo.VolCatFiles == dev_file(dev)) {
Jmsg(jcr, M_INFO, 0, _("Ready to append to end of Volume \"%s\" at file=%d.\n"),
- jcr->VolumeName, dev_file(dev));
+ dcr->VolumeName, dev_file(dev));
} else {
Jmsg(jcr, M_ERROR, 0, _("I canot write on Volume \"%s\" because:\n\
The number of files mismatch! Volume=%u Catalog=%u\n"),
- jcr->VolumeName, dev_file(dev), dev->VolCatInfo.VolCatFiles);
- mark_volume_in_error(jcr, dev);
+ dcr->VolumeName, dev_file(dev), dev->VolCatInfo.VolCatFiles);
+ mark_volume_in_error(dcr);
goto mount_next_vol;
}
}
* Returns: true if OK
* false if unable to write it
*/
-static bool rewrite_volume_label(DCR *dcr, DEV_BLOCK *block, bool recycle)
+static bool rewrite_volume_label(DCR *dcr, bool recycle)
{
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
Dmsg1(190, "ready_for_append found freshly labeled volume. dev=%x\n", dev);
dev->VolHdr.LabelType = VOL_LABEL; /* set Volume label */
- if (!write_volume_label_to_block(dcr, block)) {
+ if (!write_volume_label_to_block(dcr)) {
return false;
}
/*
}
}
/* Attempt write to check write permission */
- if (!write_block_to_dev(dcr, block)) {
+ if (!write_block_to_dev(dcr)) {
Jmsg2(jcr, M_ERROR, 0, _("Unable to write device \"%s\". ERR=%s\n"),
dev_name(dev), strerror_dev(dev));
return false;
dir_update_volume_info(dcr, true); /* indicate doing relabel */
if (recycle) {
Jmsg(jcr, M_INFO, 0, _("Recycled volume \"%s\" on device \"%s\", all previous data lost.\n"),
- jcr->VolumeName, dev_name(dev));
+ dcr->VolumeName, dev_name(dev));
} else {
Jmsg(jcr, M_INFO, 0, _("Wrote label to prelabeled Volume \"%s\" on device \"%s\"\n"),
- jcr->VolumeName, dev_name(dev));
+ dcr->VolumeName, dev_name(dev));
}
/*
* End writing real Volume label (from pre-labeled tape), or recycling
/*
* Mark volume in error in catalog
*/
-void mark_volume_in_error(JCR *jcr, DEVICE *dev)
+void mark_volume_in_error(DCR *dcr)
{
- Jmsg(jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
- jcr->VolumeName);
+ DEVICE *dev = dcr->dev;
+ Jmsg(dcr->jcr, M_INFO, 0, _("Marking Volume \"%s\" in Error in Catalog.\n"),
+ dcr->VolumeName);
bstrncpy(dev->VolCatInfo.VolCatStatus, "Error", sizeof(dev->VolCatInfo.VolCatStatus));
Dmsg0(100, "dir_update_vol_info. Set Error.\n");
- dir_update_volume_info(jcr->dcr, false);
+ dir_update_volume_info(dcr, false);
}
/*
* If we are reading, we come here at the end of the tape
* and see if there are more volumes to be mounted.
*/
-bool mount_next_read_volume(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
+bool mount_next_read_volume(DCR *dcr)
{
+ DEVICE *dev = dcr->dev;
+ JCR *jcr = dcr->jcr;
Dmsg2(90, "NumVolumes=%d CurVolume=%d\n", jcr->NumVolumes, jcr->CurVolume);
/*
* End Of Tape -- mount next Volume (if another specified)
dev->state &= ~ST_READ;
if (!acquire_device_for_read(jcr)) {
Jmsg2(jcr, M_FATAL, 0, "Cannot open Dev=%s, Vol=%s\n", dev_name(dev),
- jcr->VolumeName);
+ dcr->VolumeName);
return false;
}
return true; /* next volume mounted */
* Either because we are going to hang a new volume, or because
* of explicit user request, we release the current volume.
*/
-void release_volume(JCR *jcr, DEVICE *dev)
+void release_volume(DCR *dcr)
{
- if (jcr->dcr->WroteVol) {
+ JCR *jcr = dcr->jcr;
+ DEVICE *dev = dcr->dev;
+ if (dcr->WroteVol) {
Jmsg0(jcr, M_ERROR, 0, "Hey!!!!! WroteVol non-zero !!!!!\n");
}
/*
dev->block_num = dev->file = 0;
dev->EndBlock = dev->EndFile = 0;
memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
- memset(&jcr->VolCatInfo, 0, sizeof(jcr->VolCatInfo));
+ memset(&dcr->VolCatInfo, 0, sizeof(dcr->VolCatInfo));
memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
/* Force re-read of label */
dev->state &= ~(ST_LABEL|ST_READ|ST_APPEND);
- jcr->VolumeName[0] = 0;
+ dcr->VolumeName[0] = 0;
if ((dev->state & ST_OPENED) &&
(!dev_is_tape(dev) || !dev_cap(dev, CAP_ALWAYSOPEN))) {
projects / bacula / bacula / blobdiff