+/*
+ Bacula® - The Network Backup Solution
+
+ Copyright (C) 2002-2008 Free Software Foundation Europe e.V.
+
+ The main author of Bacula is Kern Sibbald, with contributions from
+ many others, a complete list can be found in the file AUTHORS.
+ This program is Free Software; you can redistribute it and/or
+ modify it under the terms of version two of the GNU General Public
+ License as published by the Free Software Foundation and included
+ in the file LICENSE.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+ Bacula® is a registered trademark of Kern Sibbald.
+ The licensor of Bacula is the Free Software Foundation Europe
+ (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
+ Switzerland, email:ftf@fsfeurope.org.
+*/
/*
*
* This routine provides a routine that will handle all
* archive. It uses a callback to pass you each record in turn,
* as well as a callback for mounting the next tape. It takes
* care of reading blocks, applying the bsr, ...
+ * Note, this routine is really the heart of the restore routines,
+ * and we are *really* bit pushing here so be careful about making
+ * any modifications.
*
* Kern E. Sibbald, August MMII
*
* Version $Id$
*/
-/*
- Copyright (C) 2000-2004 Kern Sibbald and John Walker
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
-
- */
#include "bacula.h"
#include "stored.h"
/* Forward referenced functions */
static void handle_session_record(DEVICE *dev, DEV_RECORD *rec, SESSION_LABEL *sessrec);
-static BSR *position_to_first_file(JCR *jcr, DEVICE *dev);
-static int try_repositioning(JCR *jcr, DEV_RECORD *rec, DEVICE *dev);
+static BSR *position_to_first_file(JCR *jcr, DCR *dcr);
+static bool try_repositioning(JCR *jcr, DEV_RECORD *rec, DCR *dcr);
#ifdef DEBUG
static char *rec_state_to_str(DEV_RECORD *rec);
#endif
+static const int dbglvl = 500;
+
+/*
+ * This subroutine reads all the records and passes them back to your
+ * callback routine (also mount routine at EOM).
+ * You must not change any values in the DEV_RECORD packet
+ */
bool read_records(DCR *dcr,
- bool record_cb(JCR *jcr, DEVICE *dev, DEV_BLOCK *block, DEV_RECORD *rec),
- bool mount_cb(JCR *jcr, DEVICE *dev, DEV_BLOCK *block))
+ bool record_cb(DCR *dcr, DEV_RECORD *rec),
+ bool mount_cb(DCR *dcr))
{
JCR *jcr = dcr->jcr;
DEVICE *dev = dcr->dev;
- DEV_BLOCK *block;
+ DEV_BLOCK *block = dcr->block;
DEV_RECORD *rec = NULL;
uint32_t record;
bool ok = true;
bool done = false;
SESSION_LABEL sessrec;
- dlist *recs; /* linked list of rec packets open */
+ dlist *recs; /* linked list of rec packets open */
- block = new_block(dev);
- recs = new dlist(rec, &rec->link);
- position_to_first_file(jcr, dev);
+ recs = New(dlist(rec, &rec->link));
+ position_to_first_file(jcr, dcr);
+ jcr->mount_next_volume = false;
for ( ; ok && !done; ) {
if (job_canceled(jcr)) {
- ok = false;
- break;
+ ok = false;
+ break;
}
- if (!read_block_from_device(dcr, block, CHECK_BLOCK_NUMBERS)) {
- if (dev_state(dev, ST_EOT)) {
- DEV_RECORD *trec = new_record();
-
- Jmsg(jcr, M_INFO, 0, "End of Volume at file %u on device %s, Volume \"%s\"\n",
- dev->file, dev_name(dev), jcr->VolumeName);
- if (!mount_cb(jcr, dev, block)) {
- Jmsg(jcr, M_INFO, 0, "End of all volumes.\n");
- ok = false;
- /*
- * Create EOT Label so that Media record may
- * be properly updated because this is the last
- * tape.
- */
- trec->FileIndex = EOT_LABEL;
- trec->File = dev->file;
- ok = record_cb(jcr, dev, block, trec);
- free_record(trec);
- break;
- }
- /*
- * We just have a new tape up, now read the label (first record)
- * and pass it off to the callback routine, then continue
- * most likely reading the previous record.
- */
- read_block_from_device(dcr, block, NO_BLOCK_NUMBER_CHECK);
- read_record_from_block(block, trec);
- handle_session_record(dev, trec, &sessrec);
- ok = record_cb(jcr, dev, block, trec);
- free_record(trec);
- position_to_first_file(jcr, dev);
- /* After reading label, we must read first data block */
- continue;
+ if (!read_block_from_device(dcr, CHECK_BLOCK_NUMBERS)) {
+ if (dev->at_eot()) {
+ DEV_RECORD *trec = new_record();
+ Jmsg(jcr, M_INFO, 0, _("End of Volume at file %u on device %s, Volume \"%s\"\n"),
+ dev->file, dev->print_name(), dcr->VolumeName);
+ volume_unused(dcr); /* mark volume unused */
+ if (!mount_cb(dcr)) {
+ Jmsg(jcr, M_INFO, 0, _("End of all volumes.\n"));
+ ok = false; /* Stop everything */
+ /*
+ * Create EOT Label so that Media record may
+ * be properly updated because this is the last
+ * tape.
+ */
+ trec->FileIndex = EOT_LABEL;
+ trec->File = dev->file;
+ ok = record_cb(dcr, trec);
+ free_record(trec);
+ if (jcr->mount_next_volume) {
+ jcr->mount_next_volume = false;
+ dev->clear_eot();
+ }
+ break;
+ }
+ jcr->mount_next_volume = false;
+ /*
+ * The Device can change at the end of a tape, so refresh it
+ * and the block from the dcr.
+ */
+ dev = dcr->dev;
+ block = dcr->block;
+ /*
+ * We just have a new tape up, now read the label (first record)
+ * and pass it off to the callback routine, then continue
+ * most likely reading the previous record.
+ */
+ read_block_from_device(dcr, NO_BLOCK_NUMBER_CHECK);
+ read_record_from_block(dcr, block, trec);
+ handle_session_record(dev, trec, &sessrec);
+ ok = record_cb(dcr, trec);
+ free_record(trec);
+ position_to_first_file(jcr, dcr);
+ /* After reading label, we must read first data block */
+ continue;
- } else if (dev_state(dev, ST_EOF)) {
- if (verbose) {
- Jmsg(jcr, M_INFO, 0, "Got EOF at file %u on device %s, Volume \"%s\"\n",
- dev->file, dev_name(dev), jcr->VolumeName);
- }
- Dmsg3(100, "Got EOF at file %u on device %s, Volume \"%s\"\n",
- dev->file, dev_name(dev), jcr->VolumeName);
- continue;
- } else if (dev_state(dev, ST_SHORT)) {
+ } else if (dev->at_eof()) {
+#ifdef neeeded_xxx
+ if (verbose) {
+ char *fp;
+ uint32_t fp_num;
+ if (dev->is_dvd()) {
+ fp = _("part");
+ fp_num = dev->part;
+ } else {
+ fp = _("file");
+ fp_num = dev->file;
+ }
+ Jmsg(jcr, M_INFO, 0, _("End of %s %u on device %s, Volume \"%s\"\n"),
+ fp, fp_num, dev->print_name(), dcr->VolumeName);
+ }
+#endif
+ Dmsg3(200, "End of file %u on device %s, Volume \"%s\"\n",
+ dev->file, dev->print_name(), dcr->VolumeName);
+ continue;
+ } else if (dev->is_short_block()) {
Jmsg1(jcr, M_ERROR, 0, "%s", dev->errmsg);
- continue;
- } else {
- /* I/O error or strange end of tape */
- display_tape_error_status(jcr, dev);
- if (forge_on || jcr->ignore_label_errors) {
- fsr_dev(dev, 1); /* try skipping bad record */
- Dmsg0(000, "Did fsr\n");
- continue; /* try to continue */
- }
- ok = false;
- break;
- }
+ continue;
+ } else {
+ /* I/O error or strange end of tape */
+ display_tape_error_status(jcr, dev);
+ if (forge_on || jcr->ignore_label_errors) {
+ dev->fsr(1); /* try skipping bad record */
+ Pmsg0(000, _("Did fsr in attemp to skip bad record.\n"));
+ continue; /* try to continue */
+ }
+ ok = false; /* stop everything */
+ break;
+ }
}
- Dmsg2(100, "New block at position=(file:block) %d:%d\n", dev->file, dev->block_num);
+ Dmsg2(dbglvl, "Read new block at pos=%u:%u\n", dev->file, dev->block_num);
#ifdef if_and_when_FAST_BLOCK_REJECTION_is_working
/* this does not stop when file/block are too big */
if (!match_bsr_block(jcr->bsr, block)) {
- if (try_repositioning(jcr, rec, dev)) {
- break; /* get next volume */
- }
- continue; /* skip this record */
+ if (try_repositioning(jcr, rec, dcr)) {
+ break; /* get next volume */
+ }
+ continue; /* skip this record */
}
#endif
/*
* Get a new record for each Job as defined by
- * VolSessionId and VolSessionTime
+ * VolSessionId and VolSessionTime
*/
bool found = false;
foreach_dlist(rec, recs) {
- if (rec->VolSessionId == block->VolSessionId &&
- rec->VolSessionTime == block->VolSessionTime) {
- found = true;
- break;
- }
+ if (rec->VolSessionId == block->VolSessionId &&
+ rec->VolSessionTime == block->VolSessionTime) {
+ found = true;
+ break;
+ }
}
if (!found) {
- rec = new_record();
- recs->prepend(rec);
- Dmsg2(100, "New record for SI=%d ST=%d\n",
- block->VolSessionId, block->VolSessionTime);
- } else {
-#ifdef xxx
- if (rec->Block != 0 && (rec->Block+1) != block->BlockNumber) {
- Jmsg(jcr, M_ERROR, 0, _("Invalid block number. Expected %u, got %u\n"),
- rec->Block+1, block->BlockNumber);
- }
-#endif
+ rec = new_record();
+ recs->prepend(rec);
+ Dmsg3(dbglvl, "New record for state=%s SI=%d ST=%d\n",
+ rec_state_to_str(rec),
+ block->VolSessionId, block->VolSessionTime);
}
- Dmsg3(100, "After mount next vol. stat=%s blk=%d rem=%d\n", rec_state_to_str(rec),
- block->BlockNumber, rec->remainder);
+ Dmsg3(dbglvl, "Before read rec loop. stat=%s blk=%d rem=%d\n", rec_state_to_str(rec),
+ block->BlockNumber, rec->remainder);
record = 0;
rec->state = 0;
- Dmsg1(100, "Block empty %d\n", is_block_empty(rec));
- for (rec->state=0; !is_block_empty(rec); ) {
- if (!read_record_from_block(block, rec)) {
- Dmsg3(100, "!read-break. state=%s blk=%d rem=%d\n", rec_state_to_str(rec),
- block->BlockNumber, rec->remainder);
- break;
- }
- Dmsg5(100, "read-OK. state=%s blk=%d rem=%d file:block=%d:%d\n",
- rec_state_to_str(rec), block->BlockNumber, rec->remainder,
- dev->file, dev->block_num);
- /*
- * At this point, we have at least a record header.
- * Now decide if we want this record or not, but remember
- * before accessing the record, we may need to read again to
- * get all the data.
- */
- record++;
- Dmsg6(100, "recno=%d state=%s blk=%d SI=%d ST=%d FI=%d\n", record,
- rec_state_to_str(rec), block->BlockNumber,
- rec->VolSessionId, rec->VolSessionTime, rec->FileIndex);
+ Dmsg1(dbglvl, "Block %s empty\n", is_block_empty(rec)?"is":"NOT");
+ for (rec->state=0; ok && !is_block_empty(rec); ) {
+ if (!read_record_from_block(dcr, block, rec)) {
+ Dmsg3(400, "!read-break. state=%s blk=%d rem=%d\n", rec_state_to_str(rec),
+ block->BlockNumber, rec->remainder);
+ break;
+ }
+ Dmsg5(dbglvl, "read-OK. state=%s blk=%d rem=%d file:block=%u:%u\n",
+ rec_state_to_str(rec), block->BlockNumber, rec->remainder,
+ dev->file, dev->block_num);
+ /*
+ * At this point, we have at least a record header.
+ * Now decide if we want this record or not, but remember
+ * before accessing the record, we may need to read again to
+ * get all the data.
+ */
+ record++;
+ Dmsg6(dbglvl, "recno=%d state=%s blk=%d SI=%d ST=%d FI=%d\n", record,
+ rec_state_to_str(rec), block->BlockNumber,
+ rec->VolSessionId, rec->VolSessionTime, rec->FileIndex);
- if (rec->FileIndex == EOM_LABEL) { /* end of tape? */
+ if (rec->FileIndex == EOM_LABEL) { /* end of tape? */
Dmsg0(40, "Get EOM LABEL\n");
- break; /* yes, get out */
- }
+ break; /* yes, get out */
+ }
- /* Some sort of label? */
- if (rec->FileIndex < 0) {
- handle_session_record(dev, rec, &sessrec);
- ok = record_cb(jcr, dev, block, rec);
- if (rec->FileIndex == EOS_LABEL) {
- Dmsg2(100, "Remove rec. SI=%d ST=%d\n", rec->VolSessionId,
- rec->VolSessionTime);
- recs->remove(rec);
- free_record(rec);
- }
- continue;
- } /* end if label record */
+ /* Some sort of label? */
+ if (rec->FileIndex < 0) {
+ handle_session_record(dev, rec, &sessrec);
+ if (jcr->bsr) {
+ /* We just check block FI and FT not FileIndex */
+ rec->match_stat = match_bsr_block(jcr->bsr, block);
+ } else {
+ rec->match_stat = 0;
+ }
+ /*
+ * Note, we pass *all* labels to the callback routine. If
+ * he wants to know if they matched the bsr, then he must
+ * check the match_stat in the record */
+ ok = record_cb(dcr, rec);
+#ifdef xxx
+ /*
+ * If this is the end of the Session (EOS) for this record
+ * we can remove the record. Note, there is a separate
+ * record to read each session. If a new session is seen
+ * a new record will be created at approx line 157 above.
+ * However, it seg faults in the for line at lineno 196.
+ */
+ if (rec->FileIndex == EOS_LABEL) {
+ Dmsg2(dbglvl, "Remove EOS rec. SI=%d ST=%d\n", rec->VolSessionId,
+ rec->VolSessionTime);
+ recs->remove(rec);
+ free_record(rec);
+ }
+#endif
+ continue;
+ } /* end if label record */
- /*
- * Apply BSR filter
- */
- if (jcr->bsr) {
- int stat = match_bsr(jcr->bsr, rec, &dev->VolHdr, &sessrec);
- if (stat == -1) { /* no more possible matches */
- done = true; /* all items found, stop */
- Dmsg2(100, "All done=(file:block) %d:%d\n", dev->file, dev->block_num);
- break;
- } else if (stat == 0) { /* no match */
- Dmsg4(100, "Clear rem=%d FI=%d before set_eof pos %d:%d\n",
- rec->remainder, rec->FileIndex, dev->file, dev->block_num);
- rec->remainder = 0;
- rec->state &= ~REC_PARTIAL_RECORD;
- if (try_repositioning(jcr, rec, dev)) {
- break;
- }
+ /*
+ * Apply BSR filter
+ */
+ if (jcr->bsr) {
+ rec->match_stat = match_bsr(jcr->bsr, rec, &dev->VolHdr, &sessrec, jcr);
+ if (rec->match_stat == -1) { /* no more possible matches */
+ done = true; /* all items found, stop */
+ Dmsg2(dbglvl, "All done=(file:block) %u:%u\n", dev->file, dev->block_num);
+ break;
+ } else if (rec->match_stat == 0) { /* no match */
+ Dmsg4(dbglvl, "BSR no match: clear rem=%d FI=%d before set_eof pos %u:%u\n",
+ rec->remainder, rec->FileIndex, dev->file, dev->block_num);
+ rec->remainder = 0;
+ rec->state &= ~REC_PARTIAL_RECORD;
+ if (try_repositioning(jcr, rec, dcr)) {
+ break;
+ }
continue; /* we don't want record, read next one */
- }
- }
- if (is_partial_record(rec)) {
- Dmsg6(100, "Partial, break. recno=%d state=%s blk=%d SI=%d ST=%d FI=%d\n", record,
- rec_state_to_str(rec), block->BlockNumber,
- rec->VolSessionId, rec->VolSessionTime, rec->FileIndex);
- break; /* read second part of record */
- }
- ok = record_cb(jcr, dev, block, rec);
- if (rec->Stream == STREAM_MD5_SIGNATURE || rec->Stream == STREAM_SHA1_SIGNATURE) {
- Dmsg3(100, "Done FI=%d before set_eof pos %d:%d\n", rec->FileIndex,
- dev->file, dev->block_num);
- if (match_set_eof(jcr->bsr, rec) && try_repositioning(jcr, rec, dev)) {
- Dmsg2(100, "Break after match_set_eof pos %d:%d\n",
- dev->file, dev->block_num);
- break;
- }
- Dmsg2(100, "After set_eof pos %d:%d\n", dev->file, dev->block_num);
- }
+ }
+ }
+ dcr->VolLastIndex = rec->FileIndex; /* let caller know where we are */
+ if (is_partial_record(rec)) {
+ Dmsg6(dbglvl, "Partial, break. recno=%d state=%s blk=%d SI=%d ST=%d FI=%d\n", record,
+ rec_state_to_str(rec), block->BlockNumber,
+ rec->VolSessionId, rec->VolSessionTime, rec->FileIndex);
+ break; /* read second part of record */
+ }
+
+ Dmsg6(dbglvl, "OK callback. recno=%d state=%s blk=%d SI=%d ST=%d FI=%d\n", record,
+ rec_state_to_str(rec), block->BlockNumber,
+ rec->VolSessionId, rec->VolSessionTime, rec->FileIndex);
+ ok = record_cb(dcr, rec);
+ /*
+ * If we have a digest stream, we check to see if we have
+ * finished the current bsr, and if so, repositioning will
+ * be turned on.
+ */
+ if (crypto_digest_stream_type(rec->Stream) != CRYPTO_DIGEST_NONE) {
+ Dmsg3(dbglvl, "Have digest FI=%u before bsr check pos %u:%u\n", rec->FileIndex,
+ dev->file, dev->block_num);
+ if (is_this_bsr_done(jcr->bsr, rec) && try_repositioning(jcr, rec, dcr)) {
+ Dmsg2(dbglvl, "This bsr done, break pos %u:%u\n",
+ dev->file, dev->block_num);
+ break;
+ }
+ Dmsg2(900, "After is_bsr_done pos %u:%u\n", dev->file, dev->block_num);
+ }
} /* end for loop over records */
- Dmsg2(100, "After end records position=(file:block) %d:%d\n", dev->file, dev->block_num);
+ Dmsg2(dbglvl, "After end recs in block. pos=%u:%u\n", dev->file, dev->block_num);
} /* end for loop over blocks */
-// Dmsg2(100, "Position=(file:block) %d:%d\n", dev->file, dev->block_num);
+// Dmsg2(dbglvl, "Position=(file:block) %u:%u\n", dev->file, dev->block_num);
/* Walk down list and free all remaining allocated recs */
while (!recs->empty()) {
}
delete recs;
print_block_read_errors(jcr, block);
- free_block(block);
return ok;
}
/*
* See if we can reposition.
- * Returns: 1 if at end of volume
- * 0 otherwise
+ * Returns: true if at end of volume
+ * false otherwise
*/
-static int try_repositioning(JCR *jcr, DEV_RECORD *rec, DEVICE *dev)
+static bool try_repositioning(JCR *jcr, DEV_RECORD *rec, DCR *dcr)
{
BSR *bsr;
+ DEVICE *dev = dcr->dev;
+
bsr = find_next_bsr(jcr->bsr, dev);
if (bsr == NULL && jcr->bsr->mount_next_volume) {
- Dmsg0(100, "Would mount next volume here\n");
- Dmsg2(100, "Current postion (file:block) %d:%d\n",
- dev->file, dev->block_num);
+ Dmsg0(dbglvl, "Would mount next volume here\n");
+ Dmsg2(dbglvl, "Current postion (file:block) %u:%u\n",
+ dev->file, dev->block_num);
jcr->bsr->mount_next_volume = false;
- dev->state |= ST_EOT;
+ if (!dev->at_eot()) {
+ /* Set EOT flag to force mount of next Volume */
+ jcr->mount_next_volume = true;
+ dev->set_eot();
+ }
rec->Block = 0;
- return 1;
- }
+ return true;
+ }
if (bsr) {
- if (verbose) {
- Jmsg(jcr, M_INFO, 0, "Reposition from (file:block) %d:%d to %d:%d\n",
- dev->file, dev->block_num, bsr->volfile->sfile,
- bsr->volblock->sblock);
+ /*
+ * ***FIXME*** gross kludge to make disk seeking work. Remove
+ * when find_next_bsr() is fixed not to return a bsr already
+ * completed.
+ */
+ uint32_t block, file;
+ /* TODO: use dev->file_addr ? */
+ uint64_t dev_addr = (((uint64_t) dev->file)<<32) | dev->block_num;
+ uint64_t bsr_addr = get_bsr_start_addr(bsr, &file, &block);
+
+ if (dev_addr > bsr_addr) {
+ return false;
}
- Dmsg4(100, "Try_Reposition from (file:block) %d:%d to %d:%d\n",
- dev->file, dev->block_num, bsr->volfile->sfile,
- bsr->volblock->sblock);
- reposition_dev(dev, bsr->volfile->sfile, bsr->volblock->sblock);
+ Dmsg4(10, "Try_Reposition from (file:block) %u:%u to %u:%u\n",
+ dev->file, dev->block_num, file, block);
+ dev->reposition(dcr, file, block);
rec->Block = 0;
}
- return 0;
+ return false;
}
/*
* Position to the first file on this volume
*/
-static BSR *position_to_first_file(JCR *jcr, DEVICE *dev)
+static BSR *position_to_first_file(JCR *jcr, DCR *dcr)
{
BSR *bsr = NULL;
+ DEVICE *dev = dcr->dev;
+ uint32_t file, block;
/*
- * Now find and position to first file and block
- * on this tape.
+ * Now find and position to first file and block
+ * on this tape.
*/
if (jcr->bsr) {
jcr->bsr->reposition = true; /* force repositioning */
bsr = find_next_bsr(jcr->bsr, dev);
- if (bsr && (bsr->volfile->sfile != 0 || bsr->volblock->sblock != 0)) {
- Jmsg(jcr, M_INFO, 0, _("Forward spacing to file:block %u:%u.\n"),
- bsr->volfile->sfile, bsr->volblock->sblock);
- Dmsg2(100, "Forward spacing to file:block %u:%u.\n",
- bsr->volfile->sfile, bsr->volblock->sblock);
- reposition_dev(dev, bsr->volfile->sfile, bsr->volblock->sblock);
+
+ if (get_bsr_start_addr(bsr, &file, &block) > 0) {
+ Jmsg(jcr, M_INFO, 0, _("Forward spacing Volume \"%s\" to file:block %u:%u.\n"),
+ dev->VolHdr.VolumeName, file, block);
+ dev->reposition(dcr, file, block);
}
}
return bsr;
{
const char *rtype;
char buf[100];
-
+
memset(sessrec, 0, sizeof(sessrec));
switch (rec->FileIndex) {
case PRE_LABEL:
- rtype = "Fresh Volume Label";
+ rtype = _("Fresh Volume Label");
break;
case VOL_LABEL:
- rtype = "Volume Label";
+ rtype = _("Volume Label");
unser_volume_label(dev, rec);
break;
case SOS_LABEL:
- rtype = "Begin Session";
+ rtype = _("Begin Session");
unser_session_label(sessrec, rec);
break;
case EOS_LABEL:
- rtype = "End Session";
+ rtype = _("End Session");
break;
case EOM_LABEL:
- rtype = "End of Media";
+ rtype = _("End of Media");
break;
default:
- bsnprintf(buf, sizeof(buf), "Unknown code %d\n", rec->FileIndex);
+ bsnprintf(buf, sizeof(buf), _("Unknown code %d\n"), rec->FileIndex);
rtype = buf;
break;
}
- Dmsg5(100, "%s Record: VolSessionId=%d VolSessionTime=%d JobId=%d DataLen=%d\n",
- rtype, rec->VolSessionId, rec->VolSessionTime, rec->Stream, rec->data_len);
+ Dmsg5(dbglvl, _("%s Record: VolSessionId=%d VolSessionTime=%d JobId=%d DataLen=%d\n"),
+ rtype, rec->VolSessionId, rec->VolSessionTime, rec->Stream, rec->data_len);
}
#ifdef DEBUG
static char *rec_state_to_str(DEV_RECORD *rec)
{
- static char buf[200];
+ static char buf[200];
buf[0] = 0;
if (rec->state & REC_NO_HEADER) {
bstrncat(buf, "Nohdr,", sizeof(buf));
projects / bacula / bacula / blobdiff