-/*
- * Drive reservation functions for Storage Daemon
- *
- * Kern Sibbald, MM
- *
- * Split from job.c and acquire.c June 2005
- *
- * Version $Id$
- *
- */
/*
Bacula® - The Network Backup Solution
- Copyright (C) 2000-2006 Free Software Foundation Europe e.V.
+ Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
This program is Free Software; you can redistribute it and/or
modify it under the terms of version two of the GNU General Public
- License as published by the Free Software Foundation plus additions
- that are listed in the file LICENSE.
+ License as published by the Free Software Foundation and included
+ in the file LICENSE.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
*/
+/*
+ * Drive reservation functions for Storage Daemon
+ *
+ * Kern Sibbald, MM
+ *
+ * Split from job.c and acquire.c June 2005
+ *
+ * Version $Id$
+ *
+ */
#include "bacula.h"
#include "stored.h"
+#define jid() ((int)get_jobid_from_tid())
+
+const int dbglvl = 50;
+
static dlist *vol_list = NULL;
-static pthread_mutex_t vol_list_lock = PTHREAD_MUTEX_INITIALIZER;
+static brwlock_t reservation_lock;
+static brwlock_t vol_list_lock;
/* Forward referenced functions */
static int can_reserve_drive(DCR *dcr, RCTX &rctx);
static bool reserve_device_for_append(DCR *dcr, RCTX &rctx);
static bool use_storage_cmd(JCR *jcr);
static void queue_reserve_message(JCR *jcr);
+static void pop_reserve_messages(JCR *jcr);
+//void switch_device(DCR *dcr, DEVICE *dev);
/* Requests from the Director daemon */
static char use_storage[] = "use storage=%127s media_type=%127s "
return strcmp(((VOLRES *)item1)->vol_name, ((VOLRES *)item2)->vol_name);
}
-static brwlock_t reservation_lock;
-
+/*
+ * This allows a given thread to recursively call lock_reservations.
+ * It must, of course, call unlock_... the same number of times.
+ */
void init_reservations_lock()
{
int errstat;
if ((errstat=rwl_init(&reservation_lock)) != 0) {
berrno be;
Emsg1(M_ABORT, 0, _("Unable to initialize reservation lock. ERR=%s\n"),
- be.strerror(errstat));
+ be.bstrerror(errstat));
}
+ if ((errstat=rwl_init(&vol_list_lock)) != 0) {
+ berrno be;
+ Emsg1(M_ABORT, 0, _("Unable to initialize volume list lock. ERR=%s\n"),
+ be.bstrerror(errstat));
+ }
}
void term_reservations_lock()
{
rwl_destroy(&reservation_lock);
+ rwl_destroy(&vol_list_lock);
}
+int reservations_lock_count = 0;
+
/* This applies to a drive and to Volumes */
-void lock_reservations()
+void _lock_reservations()
{
int errstat;
+ reservations_lock_count++;
if ((errstat=rwl_writelock(&reservation_lock)) != 0) {
berrno be;
Emsg2(M_ABORT, 0, "rwl_writelock failure. stat=%d: ERR=%s\n",
- errstat, be.strerror(errstat));
+ errstat, be.bstrerror(errstat));
}
}
-void unlock_reservations()
+void _unlock_reservations()
{
int errstat;
+ reservations_lock_count--;
if ((errstat=rwl_writeunlock(&reservation_lock)) != 0) {
berrno be;
Emsg2(M_ABORT, 0, "rwl_writeunlock failure. stat=%d: ERR=%s\n",
- errstat, be.strerror(errstat));
+ errstat, be.bstrerror(errstat));
+ }
+}
+
+int vol_list_lock_count = 0;
+
+/*
+ * This allows a given thread to recursively call to lock_volumes()
+ */
+void _lock_volumes()
+{
+ int errstat;
+ vol_list_lock_count++;
+ if ((errstat=rwl_writelock(&vol_list_lock)) != 0) {
+ berrno be;
+ Emsg2(M_ABORT, 0, "rwl_writelock failure. stat=%d: ERR=%s\n",
+ errstat, be.bstrerror(errstat));
+ }
+}
+
+void _unlock_volumes()
+{
+ int errstat;
+ vol_list_lock_count--;
+ if ((errstat=rwl_writeunlock(&vol_list_lock)) != 0) {
+ berrno be;
+ Emsg2(M_ABORT, 0, "rwl_writeunlock failure. stat=%d: ERR=%s\n",
+ errstat, be.bstrerror(errstat));
}
}
+/*
+ * List Volumes -- this should be moved to status.c
+ */
+enum {
+ debug_lock = true,
+ debug_nolock = false
+};
+
+static void debug_list_volumes(const char *imsg)
+{
+ VOLRES *vol;
+ POOL_MEM msg(PM_MESSAGE);
+
+ lock_volumes();
+ foreach_dlist(vol, vol_list) {
+ if (vol->dev) {
+ Mmsg(msg, "List %s: %s in_use=%d on device %s\n", imsg,
+ vol->vol_name, vol->is_in_use(), vol->dev->print_name());
+ } else {
+ Mmsg(msg, "List %s: %s in_use=%d no dev\n", imsg, vol->vol_name,
+ vol->is_in_use());
+ }
+ Dmsg2(dbglvl, "jid=%u %s", jid(), msg.c_str());
+ }
+
+#ifdef xxx
+ DEVICE *dev = NULL;
+ foreach_dlist(vol, vol_list) {
+ if (vol->dev == dev) {
+ Dmsg0(dbglvl, "Two Volumes on same device.\n");
+ ASSERT(0);
+ dev = vol->dev;
+ }
+ }
+#endif
+
+ unlock_volumes();
+}
+
+
+/*
+ * List Volumes -- this should be moved to status.c
+ */
+void list_volumes(void sendit(const char *msg, int len, void *sarg), void *arg)
+{
+ VOLRES *vol;
+ POOL_MEM msg(PM_MESSAGE);
+ int len;
+
+ lock_volumes();
+ foreach_dlist(vol, vol_list) {
+ DEVICE *dev = vol->dev;
+ if (dev) {
+ len = Mmsg(msg, "%s on device %s\n", vol->vol_name, dev->print_name());
+ sendit(msg.c_str(), len, arg);
+ len = Mmsg(msg, " Reader=%d writers=%d devres=%d volinuse=%d\n",
+ dev->can_read()?1:0, dev->num_writers, dev->num_reserved(),
+ vol->is_in_use());
+ sendit(msg.c_str(), len, arg);
+ } else {
+ len = Mmsg(msg, "%s no device. volinuse= %d\n", vol->vol_name,
+ vol->is_in_use());
+ sendit(msg.c_str(), len, arg);
+ }
+ }
+ unlock_volumes();
+}
+
+/*
+ * Create a Volume item to put in the Volume list
+ * Ensure that the device points to it.
+ */
+static VOLRES *new_vol_item(DCR *dcr, const char *VolumeName)
+{
+ VOLRES *vol;
+ vol = (VOLRES *)malloc(sizeof(VOLRES));
+ memset(vol, 0, sizeof(VOLRES));
+ vol->vol_name = bstrdup(VolumeName);
+ vol->dev = dcr->dev;
+ Dmsg4(dbglvl, "jid=%u new Vol=%s at %p dev=%s\n", (int)dcr->jcr->JobId,
+ VolumeName, vol->vol_name, vol->dev->print_name());
+ return vol;
+}
+
+static void free_vol_item(VOLRES *vol)
+{
+ DEVICE *dev = NULL;
+
+ free(vol->vol_name);
+ if (vol->dev) {
+ dev = vol->dev;
+ }
+ free(vol);
+ if (dev) {
+ dev->vol = NULL;
+ }
+}
+
/*
* Put a new Volume entry in the Volume list. This
* effectively reserves the volume so that it will
* not be mounted again.
*
+ * If the device has any current volume associated with it,
+ * and it is a different Volume, and the device is not busy,
+ * we release the old Volume item and insert the new one.
+ *
+ * It is assumed that the device is free and locked so that
+ * we can change the device structure.
+ *
+ * Some details of the Volume list handling:
+ *
+ * 1. The Volume list entry must be attached to the drive (rather than
+ * attached to a job as it currently is. I.e. the drive that "owns"
+ * the volume (in use, mounted)
+ * must point to the volume (still to be maintained in a list).
+ *
+ * 2. The Volume is entered in the list when a drive is reserved.
+ *
+ * 3. When a drive is in use, the device code must appropriately update the
+ * volume name as it changes (currently the list is static -- an entry is
+ * removed when the Volume is no longer reserved, in use or mounted).
+ * The new code must keep the same list entry as long as the drive
+ * has any volume associated with it but the volume name in the list
+ * must be updated when the drive has a different volume mounted.
+ *
+ * 4. A job that has reserved a volume, can un-reserve the volume, and if the
+ * volume is not mounted, and not reserved, and not in use, it will be
+ * removed from the list.
+ *
+ * 5. If a job wants to reserve a drive with a different Volume from the one on
+ * the drive, it can re-use the drive for the new Volume.
+ *
+ * 6. If a job wants a Volume that is in a different drive, it can either use the
+ * other drive or take the volume, only if the other drive is not in use or
+ * not reserved.
+ *
+ * One nice aspect of this is that the reserve use count and the writer use count
+ * already exist and are correctly programmed and will need no changes -- use
+ * counts are always very tricky.
+ *
+ * The old code had a concept of "reserving" a Volume, but was changed
+ * to reserving and using a drive. A volume is must be attached to (owned by) a
+ * drive and can move from drive to drive or be unused given certain specific
+ * conditions of the drive. The key is that the drive must "own" the Volume.
+ * The old code had the job (dcr) owning the volume (more or less). The job was
+ * to change the insertion and removal of the volumes from the list to be based
+ * on the drive rather than the job.
+ *
* Return: VOLRES entry on success
- * NULL if the Volume is already in the list
+ * NULL volume busy on another drive
*/
-VOLRES *new_volume(DCR *dcr, const char *VolumeName)
+VOLRES *reserve_volume(DCR *dcr, const char *VolumeName)
{
VOLRES *vol, *nvol;
+ DEVICE * volatile dev = dcr->dev;
+
+ ASSERT(dev != NULL);
- Dmsg1(400, "new_volume %s\n", VolumeName);
+ Dmsg3(dbglvl, "jid=%u enter reserve_volume=%s drive=%s\n", jid(), VolumeName,
+ dcr->dev->print_name());
/*
* We lock the reservations system here to ensure
* when adding a new volume that no newly scheduled
* job can reserve it.
*/
- lock_reservations();
- P(vol_list_lock);
- if (dcr->dev) {
-again:
- foreach_dlist(vol, vol_list) {
- if (vol && vol->dev == dcr->dev) {
- vol_list->remove(vol);
- if (vol->vol_name) {
- free(vol->vol_name);
- }
- free(vol);
- goto again;
+ lock_volumes();
+ debug_list_volumes("begin reserve_volume");
+ /*
+ * First, remove any old volume attached to this device as it
+ * is no longer used.
+ */
+ if (dev->vol) {
+ vol = dev->vol;
+ Dmsg5(dbglvl, "jid=%u Vol attached=%s, newvol=%s volinuse=%d on %s\n",
+ jid(), vol->vol_name, VolumeName, vol->is_in_use(), dev->print_name());
+ /*
+ * Make sure we don't remove the current volume we are inserting
+ * because it was probably inserted by another job, or it
+ * is not being used and is marked as not reserved.
+ */
+ if (strcmp(vol->vol_name, VolumeName) == 0) {
+ Dmsg3(dbglvl, "jid=%u === set reserved vol=%s dev=%s\n", jid(), VolumeName,
+ vol->dev->print_name());
+ vol->set_in_use(); /* retake vol if released previously */
+ dcr->reserved_volume = true; /* reserved volume */
+ goto get_out; /* Volume already on this device */
+ } else {
+ /* Don't release a volume if it was reserved by someone other than us */
+ if (vol->is_in_use() && !dcr->reserved_volume) {
+ Dmsg2(dbglvl, "jid=%u Cannot free vol=%s. It is reserved.\n", jid(), vol->vol_name);
+ vol = NULL; /* vol in use */
+ goto get_out;
}
+ Dmsg3(dbglvl, "jid=%u reserve_vol free vol=%s at %p\n", jid(), vol->vol_name, vol->vol_name);
+ free_volume(dev);
+ dev->set_unload(); /* have to unload current volume */
+ debug_list_volumes("reserve_vol free");
}
}
- vol = (VOLRES *)malloc(sizeof(VOLRES));
- memset(vol, 0, sizeof(VOLRES));
- vol->vol_name = bstrdup(VolumeName);
- vol->dev = dcr->dev;
- vol->dcr = dcr;
- Dmsg2(100, "New Vol=%s dev=%s\n", VolumeName, dcr->dev->print_name());
- nvol = (VOLRES *)vol_list->binary_insert(vol, my_compare);
- if (nvol != vol) {
- free(vol->vol_name);
- free(vol);
- vol = NULL;
- if (dcr->dev) {
- DEVICE *dev = nvol->dev;
- if (!dev->is_busy()) {
- Dmsg3(100, "Swap vol=%s from dev=%s to %s\n", VolumeName,
- dev->print_name(), dcr->dev->print_name());
- nvol->dev = dcr->dev;
- dev->VolHdr.VolumeName[0] = 0;
+
+ /* Create a new Volume entry */
+ nvol = new_vol_item(dcr, VolumeName);
+
+ /*
+ * Now try to insert the new Volume
+ */
+ vol = (VOLRES *)vol_list->binary_insert(nvol, my_compare);
+ if (vol != nvol) {
+ Dmsg3(dbglvl, "jid=%u Found vol=%s dev-same=%d\n", jid(), vol->vol_name, dev==vol->dev);
+ /*
+ * At this point, a Volume with this name already is in the list,
+ * so we simply release our new Volume entry. Note, this should
+ * only happen if we are moving the volume from one drive to another.
+ */
+ Dmsg3(dbglvl, "jid=%u reserve_vol free-tmp vol=%s at %p\n",
+ (int)dcr->jcr->JobId, vol->vol_name, vol->vol_name);
+ /*
+ * Clear dev pointer so that free_vol_item() doesn't
+ * take away our volume.
+ */
+ nvol->dev = NULL; /* don't zap dev entry */
+ free_vol_item(nvol);
+
+ /*
+ * Check if we are trying to use the Volume on a different drive
+ * dev is our device
+ * vol->dev is where the Volume we want is
+ */
+ if (dev != vol->dev) {
+ /* Caller wants to switch Volume to another device */
+ if (!vol->dev->is_busy() && !vol->is_swapping()) {
+ Dmsg4(dbglvl, "==== jid=%u Swap vol=%s from dev=%s to %s\n", jid(),
+ VolumeName, vol->dev->print_name(), dev->print_name());
+ free_volume(dev); /* free any volume attached to our drive */
+ vol->dev->set_unload(); /* unload the other drive */
+ vol->set_swapping(); /* swap from other drive */
+ dev->swap_dev = vol->dev; /* remember to get this vol */
+ vol->dev->set_load(); /* then reload on our drive */
+ vol->dev->vol = NULL; /* remove volume from other drive */
+ vol->dev = dev; /* point the Volume at our drive */
+ dev->vol = vol; /* point our drive at the Volume */
} else {
- Dmsg3(100, "!!!! could not swap vol=%s from dev=%s to %s\n", VolumeName,
- dev->print_name(), dcr->dev->print_name());
+ Dmsg4(dbglvl, "jid=%u ==== Swap not possible Vol busy vol=%s from dev=%s to %s\n", jid(),
+ VolumeName, vol->dev->print_name(), dev->print_name());
+ vol = NULL; /* device busy */
+ goto get_out;
}
+ } else {
+ dev->vol = vol;
}
+ } else {
+ dev->vol = vol; /* point to newly inserted volume */
+ }
+
+get_out:
+ if (vol) {
+ Dmsg3(dbglvl, "jid=%u === set in_use. vol=%s dev=%s\n", jid(), vol->vol_name,
+ vol->dev->print_name());
+ vol->set_in_use();
+ dcr->reserved_volume = true;
}
- V(vol_list_lock);
- unlock_reservations();
+ debug_list_volumes("end new volume");
+ unlock_volumes();
return vol;
}
+/*
+ * Switch from current device to given device
+ * (not yet used)
+ */
+#ifdef xxx
+void switch_device(DCR *dcr, DEVICE *dev)
+{
+ DCR save_dcr;
+
+ dev->dlock();
+ memcpy(&save_dcr, dcr, sizeof(save_dcr));
+ clean_device(dcr); /* clean up the dcr */
+
+ dcr->dev = dev; /* get new device pointer */
+ Jmsg(dcr->jcr, M_INFO, 0, _("Device switch. New device %s chosen.\n"),
+ dcr->dev->print_name());
+
+ bstrncpy(dcr->VolumeName, save_dcr.VolumeName, sizeof(dcr->VolumeName));
+ bstrncpy(dcr->media_type, save_dcr.media_type, sizeof(dcr->media_type));
+ dcr->VolCatInfo.Slot = save_dcr.VolCatInfo.Slot;
+ bstrncpy(dcr->pool_name, save_dcr.pool_name, sizeof(dcr->pool_name));
+ bstrncpy(dcr->pool_type, save_dcr.pool_type, sizeof(dcr->pool_type));
+ bstrncpy(dcr->dev_name, dev->dev_name, sizeof(dcr->dev_name));
+
+// dcr->set_reserved();
+
+ dev->dunlock();
+}
+#endif
+
/*
* Search for a Volume name in the Volume list.
*
* Returns: VOLRES entry on success
* NULL if the Volume is not in the list
*/
-VOLRES *find_volume(const char *VolumeName)
+VOLRES *find_volume(const char *VolumeName)
{
VOLRES vol, *fvol;
/* Do not lock reservations here */
- P(vol_list_lock);
+ lock_volumes();
vol.vol_name = bstrdup(VolumeName);
fvol = (VOLRES *)vol_list->binary_search(&vol, my_compare);
free(vol.vol_name);
- V(vol_list_lock);
+ Dmsg3(dbglvl, "jid=%u find_vol=%s found=%d\n", jid(), VolumeName, fvol!=NULL);
+ debug_list_volumes("find_volume");
+ unlock_volumes();
return fvol;
}
+void DCR::set_reserved()
+{
+ m_reserved = true;
+ Dmsg2(dbglvl, "Inc reserve=%d dev=%s\n", dev->num_reserved(), dev->print_name());
+ dev->inc_reserved();
+}
+
+void DCR::clear_reserved()
+{
+ if (m_reserved) {
+ m_reserved = false;
+ dev->dec_reserved();
+ Dmsg2(dbglvl, "Dec reserve=%d dev=%s\n", dev->num_reserved(), dev->print_name());
+ }
+}
+
+/*
+ * Remove any reservation from a drive and tell the system
+ * that the volume is unused at least by us.
+ */
+void DCR::unreserve_device()
+{
+ lock_volumes();
+ if (is_reserved()) {
+ clear_reserved();
+ reserved_volume = false;
+ /* If we set read mode in reserving, remove it */
+ if (dev->can_read()) {
+ dev->clear_read();
+ }
+ if (dev->num_writers < 0) {
+ Jmsg1(jcr, M_ERROR, 0, _("Hey! num_writers=%d!!!!\n"), dev->num_writers);
+ dev->num_writers = 0;
+ }
+ if (dev->num_reserved() == 0 && dev->num_writers == 0) {
+ volume_unused(this);
+ }
+ }
+ unlock_volumes();
+}
+
/*
- * Free a Volume from the Volume list
+ * Free a Volume from the Volume list if it is no longer used
+ * Note, for tape drives we want to remember where the Volume
+ * was when last used, so rather than free the volume entry,
+ * we simply mark it "not reserved" so when the drive is really
+ * needed for another volume, we can reuse it.
*
- * Returns: true if the Volume found and removed from the list
- * false if the Volume is not in the list
+ * Returns: true if the Volume found and "removed" from the list
+ * false if the Volume is not in the list or is in use
*/
-bool free_volume(DEVICE *dev)
+bool volume_unused(DCR *dcr)
{
- VOLRES vol, *fvol;
+ DEVICE *dev = dcr->dev;
- P(vol_list_lock);
- if (dev->VolHdr.VolumeName[0] == 0) {
- Dmsg1(100, "free_volume: no vol on dev %s\n", dev->print_name());
- /*
- * Our device has no VolumeName listed, but
- * search the list for any Volume attached to
- * this device and remove it.
- */
- foreach_dlist(fvol, vol_list) {
- if (fvol && fvol->dev == dev) {
- vol_list->remove(fvol);
- if (fvol->vol_name) {
- Dmsg2(100, "free_volume %s dev=%s\n", fvol->vol_name, dev->print_name());
- free(fvol->vol_name);
- }
- free(fvol);
- break;
- }
- }
- goto bail_out;
+ if (!dev->vol) {
+ Dmsg2(dbglvl, "jid=%u vol_unused: no vol on %s\n", (int)dcr->jcr->JobId, dev->print_name());
+ debug_list_volumes("null vol cannot unreserve_volume");
+ return false;
}
- Dmsg1(400, "free_volume %s\n", dev->VolHdr.VolumeName);
- vol.vol_name = bstrdup(dev->VolHdr.VolumeName);
- fvol = (VOLRES *)vol_list->binary_search(&vol, my_compare);
- if (fvol) {
- vol_list->remove(fvol);
- Dmsg2(100, "free_volume %s dev=%s\n", fvol->vol_name, dev->print_name());
- free(fvol->vol_name);
- free(fvol);
+ if (dev->vol->is_swapping()) {
+ Dmsg1(dbglvl, "vol_unused: vol being swapped on %s\n", dev->print_name());
+ debug_list_volumes("swapping vol cannot unreserve_volume");
+ return false;
}
- free(vol.vol_name);
- dev->VolHdr.VolumeName[0] = 0;
-bail_out:
- V(vol_list_lock);
- return fvol != NULL;
-}
-/* Free volume reserved by this dcr but not attached to a dev */
-void free_unused_volume(DCR *dcr)
-{
- VOLRES *vol;
+#ifdef xxx
+ if (dev->is_busy()) {
+ Dmsg2(dbglvl, "jid=%u vol_unused: busy on %s\n", (int)dcr->jcr->JobId, dev->print_name());
+ debug_list_volumes("dev busy cannot unreserve_volume");
+ return false;
+ }
+#endif
+#ifdef xxx
+ if (dev->num_writers > 0 || dev->num_reserved() > 0) {
+ ASSERT(0);
+ }
+#endif
- P(vol_list_lock);
- for (vol=(VOLRES *)vol_list->first(); vol; vol=(VOLRES *)vol_list->next(vol)) {
- if (vol->dcr == dcr && (vol->dev == NULL ||
- strcmp(vol->vol_name, vol->dev->VolHdr.VolumeName) != 0)) {
- vol_list->remove(vol);
- Dmsg1(100, "free_unused_volume %s\n", vol->vol_name);
- free(vol->vol_name);
- free(vol);
- break;
- }
+ /*
+ * If this is a tape, we do not free the volume, rather we wait
+ * until the autoloader unloads it, or until another tape is
+ * explicitly read in this drive. This allows the SD to remember
+ * where the tapes are or last were.
+ */
+ Dmsg5(dbglvl, "jid=%u === set not reserved vol=%s num_writers=%d dev_reserved=%d dev=%s\n",
+ jid(), dev->vol->vol_name, dev->num_writers, dev->num_reserved(), dev->print_name());
+ dev->vol->clear_in_use();
+ if (dev->is_tape() || dev->is_autochanger()) {
+ return true;
+ } else {
+ /*
+ * Note, this frees the volume reservation entry, but the
+ * file descriptor remains open with the OS.
+ */
+ return free_volume(dev);
}
- V(vol_list_lock);
}
/*
- * List Volumes -- this should be moved to status.c
+ * Unconditionally release the volume entry
*/
-void list_volumes(void sendit(const char *msg, int len, void *sarg), void *arg)
+bool free_volume(DEVICE *dev)
{
VOLRES *vol;
- char *msg;
- int len;
-
- msg = (char *)get_pool_memory(PM_MESSAGE);
- P(vol_list_lock);
- for (vol=(VOLRES *)vol_list->first(); vol; vol=(VOLRES *)vol_list->next(vol)) {
- if (vol->dev) {
- len = Mmsg(msg, "%s on device %s\n", vol->vol_name, vol->dev->print_name());
- sendit(msg, len, arg);
- } else {
- len = Mmsg(msg, "%s\n", vol->vol_name);
- sendit(msg, len, arg);
- }
+ if (dev->vol == NULL) {
+ Dmsg2(dbglvl, "jid=%u No vol on dev %s\n", jid(), dev->print_name());
+ return false;
}
- V(vol_list_lock);
-
- free_pool_memory(msg);
+ lock_volumes();
+ vol = dev->vol;
+ /* Don't free a volume while it is being swapped */
+ if (!vol->is_swapping()) {
+ dev->vol = NULL;
+ vol_list->remove(vol);
+ Dmsg3(dbglvl, "jid=%u === free_volume %s dev=%s\n", jid(), vol->vol_name, dev->print_name());
+ free_vol_item(vol);
+ debug_list_volumes("free_volume");
+ }
+ unlock_volumes();
+ return true;
}
+
/* Create the Volume list */
void create_volume_list()
{
- VOLRES *dummy = NULL;
+ VOLRES *vol = NULL;
if (vol_list == NULL) {
- vol_list = New(dlist(dummy, &dummy->link));
+ vol_list = New(dlist(vol, &vol->link));
}
}
if (!vol_list) {
return;
}
- P(vol_list_lock);
- for (vol=(VOLRES *)vol_list->first(); vol; vol=(VOLRES *)vol_list->next(vol)) {
- Dmsg3(000, "Unreleased Volume=%s dcr=0x%x dev=0x%x\n", vol->vol_name,
- vol->dcr, vol->dev);
+ lock_volumes();
+ foreach_dlist(vol, vol_list) {
+ if (vol->dev) {
+ Dmsg3(dbglvl, "jid=%u free vol_list Volume=%s dev=%s\n", jid(),
+ vol->vol_name, vol->dev->print_name());
+ } else {
+ Dmsg3(dbglvl, "jid=%u free vol_list Volume=%s dev=%p\n", jid(),
+ vol->vol_name, vol->dev);
+ }
+ free(vol->vol_name);
+ vol->vol_name = NULL;
}
delete vol_list;
vol_list = NULL;
- V(vol_list_lock);
+ unlock_volumes();
}
-bool is_volume_in_use(DCR *dcr)
+bool DCR::can_i_use_volume()
{
- VOLRES *vol = find_volume(dcr->VolumeName);
+ bool rtn = true;
+ VOLRES *vol;
+
+ lock_volumes();
+ vol = find_volume(VolumeName);
if (!vol) {
- Dmsg1(100, "Vol=%s not in use.\n", dcr->VolumeName);
- return false; /* vol not in list */
- }
- if (!vol->dev) { /* vol not attached to device */
- Dmsg1(100, "Vol=%s has no dev.\n", dcr->VolumeName);
- return false;
+ Dmsg2(dbglvl, "jid=%u Vol=%s not in use.\n", jid(), VolumeName);
+ goto get_out; /* vol not in list */
}
- if (dcr->dev == vol->dev) { /* same device OK */
- Dmsg1(100, "Vol=%s on same dev.\n", dcr->VolumeName);
- return false;
+ ASSERT(vol->dev != NULL);
+
+ if (dev == vol->dev) { /* same device OK */
+ Dmsg2(dbglvl, "jid=%u Vol=%s on same dev.\n", jid(), VolumeName);
+ goto get_out;
+ } else {
+ Dmsg4(dbglvl, "jid=%u Vol=%s on %s we have %s\n", jid(), VolumeName,
+ vol->dev->print_name(), dev->print_name());
}
+ /* ***FIXME*** check this ... */
if (!vol->dev->is_busy()) {
- Dmsg2(100, "Vol=%s dev=%s not busy.\n", dcr->VolumeName, vol->dev->print_name());
- return false;
+ Dmsg3(dbglvl, "jid=%u Vol=%s dev=%s not busy.\n", jid(), VolumeName, vol->dev->print_name());
+ goto get_out;
+ } else {
+ Dmsg3(dbglvl, "jid=%u Vol=%s dev=%s busy.\n", jid(), VolumeName, vol->dev->print_name());
}
- Dmsg2(100, "Vol=%s used by %s.\n", dcr->VolumeName, vol->dev->print_name());
- return true;
+ Dmsg3(dbglvl, "jid=%u Vol=%s in use by %s.\n", jid(), VolumeName, vol->dev->print_name());
+ rtn = false;
+
+get_out:
+ unlock_volumes();
+ return rtn;
+
}
int Copy, Stripe;
DIRSTORE *store;
RCTX rctx;
- char *msg;
- alist *msgs;
alist *dirstore;
memset(&rctx, 0, sizeof(RCTX));
* use_device for each device that it wants to use.
*/
dirstore = New(alist(10, not_owned_by_alist));
-// Dmsg2(000, "dirstore=%p JobId=%u\n", dirstore, jcr->JobId);
- msgs = jcr->reserve_msgs = New(alist(10, not_owned_by_alist));
+ jcr->reserve_msgs = New(alist(10, not_owned_by_alist));
do {
- Dmsg1(100, "<dird: %s", dir->msg);
+ Dmsg2(dbglvl, "jid=%u <dird: %s", jid(), dir->msg);
ok = sscanf(dir->msg, use_storage, store_name.c_str(),
media_type.c_str(), pool_name.c_str(),
pool_type.c_str(), &append, &Copy, &Stripe) == 7;
store->append = append;
/* Now get all devices */
- while (bnet_recv(dir) >= 0) {
- Dmsg1(100, "<dird device: %s", dir->msg);
+ while (dir->recv() >= 0) {
+ Dmsg2(dbglvl, "jid=%u <dird device: %s", jid(), dir->msg);
ok = sscanf(dir->msg, use_device, dev_name.c_str()) == 1;
if (!ok) {
break;
unbash_spaces(dev_name);
store->device->append(bstrdup(dev_name.c_str()));
}
- } while (ok && bnet_recv(dir) >= 0);
+ } while (ok && dir->recv() >= 0);
-#ifdef DEVELOPER
- /* This loop is debug code and can be removed */
- /* ***FIXME**** remove after 1.38 release */
+ /* Developer debug code */
char *device_name;
- foreach_alist(store, dirstore) {
- Dmsg5(110, "Storage=%s media_type=%s pool=%s pool_type=%s append=%d\n",
- store->name, store->media_type, store->pool_name,
- store->pool_type, store->append);
- foreach_alist(device_name, store->device) {
- Dmsg1(110, " Device=%s\n", device_name);
+ if (debug_level >= dbglvl) {
+ foreach_alist(store, dirstore) {
+ Dmsg6(dbglvl, "jid=%u Storage=%s media_type=%s pool=%s pool_type=%s append=%d\n",
+ (int)rctx.jcr->JobId,
+ store->name, store->media_type, store->pool_name,
+ store->pool_type, store->append);
+ foreach_alist(device_name, store->device) {
+ Dmsg2(dbglvl, "jid=%u Device=%s\n", jid(), device_name);
+ }
}
}
-#endif
init_jcr_device_wait_timers(jcr);
+ jcr->dcr = new_dcr(jcr, NULL, NULL); /* get a dcr */
+ if (!jcr->dcr) {
+ BSOCK *dir = jcr->dir_bsock;
+ dir->fsend(_("3939 Could not get dcr\n"));
+ Dmsg1(dbglvl, ">dird: %s", dir->msg);
+ ok = false;
+ }
/*
* At this point, we have a list of all the Director's Storage
* resources indicated for this Job, which include Pool, PoolType,
* Wiffle through them and find one that can do the backup.
*/
if (ok) {
- bool first = true; /* print wait message once */
+ int wait_for_device_retries = 0;
+ int repeat = 0;
bool fail = false;
rctx.notify_dir = true;
+
lock_reservations();
for ( ; !fail && !job_canceled(jcr); ) {
- while ((msg = (char *)msgs->pop())) {
- free(msg);
- }
+ pop_reserve_messages(jcr);
rctx.suitable_device = false;
rctx.have_volume = false;
+ rctx.VolumeName[0] = 0;
rctx.any_drive = false;
if (!jcr->PreferMountedVols) {
- /* Look for unused drives in autochangers */
+ /*
+ * Here we try to find a drive that is not used.
+ * This will maximize the use of available drives.
+ *
+ */
rctx.num_writers = 20000000; /* start with impossible number */
rctx.low_use_drive = NULL;
rctx.PreferMountedVols = false;
rctx.exact_match = false;
rctx.autochanger_only = true;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
rctx.try_low_use_drive = false;
}
rctx.autochanger_only = false;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
}
- /* Look for an exact match all drives */
+ /*
+ * Now we look for a drive that may or may not be in
+ * use.
+ */
+ /* Look for an exact Volume match all drives */
rctx.PreferMountedVols = true;
rctx.exact_match = true;
rctx.autochanger_only = false;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/* Look for any mounted drive */
rctx.exact_match = false;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/* Try any drive */
rctx.any_drive = true;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/* Keep reservations locked *except* during wait_for_device() */
unlock_reservations();
- if (!rctx.suitable_device || !wait_for_device(jcr, first)) {
- Dmsg0(100, "Fail. !suitable_device || !wait_for_device\n");
+ /*
+ * The idea of looping on repeat a few times it to ensure
+ * that if there is some subtle timing problem between two
+ * jobs, we will simply try again, and most likely succeed.
+ * This can happen if one job reserves a drive or finishes using
+ * a drive at the same time a second job wants it.
+ */
+ if (repeat++ > 1) { /* try algorithm 3 times */
+ bmicrosleep(30, 0); /* wait a bit */
+ Dmsg1(dbglvl, "jid=%u repeat reserve algorithm\n", (int)rctx.jcr->JobId);
+ } else if (!rctx.suitable_device || !wait_for_device(jcr, wait_for_device_retries)) {
+ Dmsg1(dbglvl, "jid=%u Fail. !suitable_device || !wait_for_device\n",
+ (int)rctx.jcr->JobId);
fail = true;
}
lock_reservations();
- first = false;
- bnet_sig(dir, BNET_HEARTBEAT); /* Inform Dir that we are alive */
+ dir->signal(BNET_HEARTBEAT); /* Inform Dir that we are alive */
}
unlock_reservations();
if (!ok) {
Jmsg(jcr, M_FATAL, 0, _("\n"
" Device \"%s\" with MediaType \"%s\" requested by DIR not found in SD Device resources.\n"),
dev_name.c_str(), media_type.c_str());
- bnet_fsend(dir, NO_device, dev_name.c_str());
+ dir->fsend(NO_device, dev_name.c_str());
- Dmsg1(100, ">dird: %s", dir->msg);
+ Dmsg2(dbglvl, "jid=%u >dird: %s", jid(), dir->msg);
}
} else {
unbash_spaces(dir->msg);
pm_strcpy(jcr->errmsg, dir->msg);
Jmsg(jcr, M_FATAL, 0, _("Failed command: %s\n"), jcr->errmsg);
- bnet_fsend(dir, BAD_use, jcr->errmsg);
- Dmsg1(100, ">dird: %s", dir->msg);
+ dir->fsend(BAD_use, jcr->errmsg);
+ Dmsg2(dbglvl, "jid=%u >dird: %s", jid(), dir->msg);
}
- release_msgs(jcr);
+ release_reserve_messages(jcr);
return ok;
}
-void release_msgs(JCR *jcr)
+
+/*
+ * Walk through the autochanger resources and check if
+ * the volume is in one of them.
+ *
+ * Returns: true if volume is in device
+ * false otherwise
+ */
+static bool is_vol_in_autochanger(RCTX &rctx, VOLRES *vol)
{
- alist *msgs = jcr->reserve_msgs;
- char *msg;
+ AUTOCHANGER *changer = vol->dev->device->changer_res;
- if (!msgs) {
- return;
- }
- lock_reservations();
- while ((msg = (char *)msgs->pop())) {
- free(msg);
- }
- delete msgs;
- jcr->reserve_msgs = NULL;
- unlock_reservations();
+ /* Find resource, and make sure we were able to open it */
+ if (strcmp(rctx.device_name, changer->hdr.name) == 0) {
+ Dmsg2(dbglvl, "jid=%u Found changer device %s\n", (int)rctx.jcr->JobId, vol->dev->device->hdr.name);
+ return true;
+ }
+ Dmsg2(dbglvl, "jid=%u Incorrect changer device %s\n", (int)rctx.jcr->JobId, changer->hdr.name);
+ return false;
}
/*
* Search for a device suitable for this job.
+ * Note, this routine sets sets rctx.suitable_device if any
+ * device exists within the SD. The device may not be actually
+ * useable.
+ * It also returns if it finds a useable device.
*/
bool find_suitable_device_for_job(JCR *jcr, RCTX &rctx)
{
- bool ok;
+ bool ok = false;
DIRSTORE *store;
char *device_name;
alist *dirstore;
+ DCR *dcr = jcr->dcr;
if (rctx.append) {
dirstore = jcr->write_store;
} else {
dirstore = jcr->read_store;
}
+ Dmsg5(dbglvl, "jid=%u PrefMnt=%d exact=%d suitable=%d chgronly=%d\n",
+ (int)rctx.jcr->JobId,
+ rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
+ rctx.autochanger_only);
+
/*
+ * If the appropriate conditions of this if are met, namely that
+ * we are appending and the user wants mounted drive (or we
+ * force try a mounted drive because they are all busy), we
+ * start by looking at all the Volumes in the volume list.
+ */
+ if (!vol_list->empty() && rctx.append && rctx.PreferMountedVols) {
+ dlist *temp_vol_list, *save_vol_list;
+ VOLRES *vol = NULL;
+ lock_volumes();
+ Dmsg0(dbglvl, "lock volumes\n");
+
+ /*
+ * Create a temporary copy of the volume list. We do this,
+ * to avoid having the volume list locked during the
+ * call to reserve_device(), which would cause a deadlock.
+ * Note, we may want to add an update counter on the vol_list
+ * so that if it is modified while we are traversing the copy
+ * we can take note and act accordingly (probably redo the
+ * search at least a few times).
+ */
+ Dmsg1(dbglvl, "jid=%u duplicate vol list\n", (int)rctx.jcr->JobId);
+ temp_vol_list = New(dlist(vol, &vol->link));
+ foreach_dlist(vol, vol_list) {
+ VOLRES *nvol;
+ VOLRES *tvol = (VOLRES *)malloc(sizeof(VOLRES));
+ memset(tvol, 0, sizeof(VOLRES));
+ tvol->vol_name = bstrdup(vol->vol_name);
+ tvol->dev = vol->dev;
+ nvol = (VOLRES *)temp_vol_list->binary_insert(tvol, my_compare);
+ if (tvol != nvol) {
+ tvol->dev = NULL; /* don't zap dev entry */
+ free_vol_item(tvol);
+ Pmsg0(000, "Logic error. Duplicating vol list hit duplicate.\n");
+ Jmsg(jcr, M_WARNING, 0, "Logic error. Duplicating vol list hit duplicate.\n");
+ }
+ }
+ unlock_volumes();
+
+ /* Look through reserved volumes for one we can use */
+ Dmsg1(dbglvl, "jid=%u look for vol in vol list\n", (int)rctx.jcr->JobId);
+ foreach_dlist(vol, temp_vol_list) {
+ if (!vol->dev) {
+ Dmsg2(dbglvl, "jid=%u vol=%s no dev\n", (int)rctx.jcr->JobId, vol->vol_name);
+ continue;
+ }
+ /* Check with Director if this Volume is OK */
+ bstrncpy(dcr->VolumeName, vol->vol_name, sizeof(dcr->VolumeName));
+ if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE)) {
+ continue;
+ }
+
+ Dmsg2(dbglvl, "jid=%u vol=%s OK for this job\n", (int)rctx.jcr->JobId, vol->vol_name);
+ foreach_alist(store, dirstore) {
+ int stat;
+ rctx.store = store;
+ foreach_alist(device_name, store->device) {
+ /* Found a device, try to use it */
+ rctx.device_name = device_name;
+ rctx.device = vol->dev->device;
+
+ if (vol->dev->is_autochanger()) {
+ Dmsg2(dbglvl, "jid=%u vol=%s is in changer\n", (int)rctx.jcr->JobId,
+ vol->vol_name);
+ if (!is_vol_in_autochanger(rctx, vol)) {
+ continue;
+ }
+ } else if (strcmp(device_name, vol->dev->device->hdr.name) != 0) {
+ Dmsg3(dbglvl, "jid=%u device=%s not suitable want %s\n", (int)rctx.jcr->JobId,
+ vol->dev->device->hdr.name, device_name);
+ continue;
+ }
+
+ bstrncpy(rctx.VolumeName, vol->vol_name, sizeof(rctx.VolumeName));
+ rctx.have_volume = true;
+ /* Try reserving this device and volume */
+ Dmsg3(dbglvl, "jid=%u try vol=%s on device=%s\n", (int)rctx.jcr->JobId,
+ rctx.VolumeName, device_name);
+ stat = reserve_device(rctx);
+ if (stat == 1) { /* found available device */
+ Dmsg2(dbglvl, "jid=%u Suitable device found=%s\n", (int)rctx.jcr->JobId,
+ device_name);
+ ok = true;
+ break;
+ } else if (stat == 0) { /* device busy */
+ Dmsg2(dbglvl, "jid=%u Suitable device=%s, busy: not use\n",
+ (int)rctx.jcr->JobId, device_name);
+ } else {
+ /* otherwise error */
+ Dmsg1(dbglvl, "jid=%u No suitable device found.\n", (int)rctx.jcr->JobId);
+ }
+ rctx.have_volume = false;
+ rctx.VolumeName[0] = 0;
+ }
+ if (ok) {
+ break;
+ }
+ }
+ if (ok) {
+ break;
+ }
+ } /* end for loop over reserved volumes */
+
+ Dmsg1(dbglvl, "%u lock volumes\n", jid());
+ lock_volumes();
+ save_vol_list = vol_list;
+ vol_list = temp_vol_list;
+ free_volume_list(); /* release temp_vol_list */
+ vol_list = save_vol_list;
+ Dmsg1(dbglvl, "jid=%u deleted temp vol list\n", (int)rctx.jcr->JobId);
+ Dmsg1(dbglvl, "jid=%u unlock volumes\n", (int)rctx.jcr->JobId);
+ unlock_volumes();
+ }
+ if (ok) {
+ Dmsg2(dbglvl, "jid=%u got vol %s from in-use vols list\n", (int)rctx.jcr->JobId,
+ rctx.VolumeName);
+ return true;
+ }
+
+ /*
+ * No reserved volume we can use, so now search for an available device.
+ *
* For each storage device that the user specified, we
* search and see if there is a resource for that device.
*/
- Dmsg4(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only);
- ok = false;
foreach_alist(store, dirstore) {
rctx.store = store;
foreach_alist(device_name, store->device) {
rctx.device_name = device_name;
stat = search_res_for_device(rctx);
if (stat == 1) { /* found available device */
- Dmsg1(100, "Suitable device found=%s\n", device_name);
+ Dmsg2(dbglvl, "jid=%u available device found=%s\n", (int)rctx.jcr->JobId,device_name);
ok = true;
break;
} else if (stat == 0) { /* device busy */
- Dmsg1(110, "Suitable device found=%s, not used: busy\n", device_name);
+ Dmsg2(dbglvl, "jid=%u No usable device=%s, busy: not use\n", (int)rctx.jcr->JobId,device_name);
} else {
/* otherwise error */
- Dmsg0(110, "No suitable device found.\n");
+ Dmsg1(dbglvl, "jid=%u No usable device found.\n", (int)rctx.jcr->JobId);
}
}
if (ok) {
break;
}
}
-
+ if (ok) {
+ Dmsg1(dbglvl, "OK dev found. Vol=%s\n", rctx.VolumeName);
+ } else {
+ Dmsg0(dbglvl, "Leave find_suit_dev: no dev found.\n");
+ }
return ok;
}
int search_res_for_device(RCTX &rctx)
{
AUTOCHANGER *changer;
- BSOCK *dir = rctx.jcr->dir_bsock;
- bool ok;
int stat;
- Dmsg1(110, "Search res for %s\n", rctx.device_name);
+ Dmsg2(dbglvl, "jid=%u search res for %s\n", (int)rctx.jcr->JobId, rctx.device_name);
/* Look through Autochangers first */
foreach_res(changer, R_AUTOCHANGER) {
- Dmsg1(150, "Try match changer res=%s\n", changer->hdr.name);
+ Dmsg2(dbglvl, "jid=%u Try match changer res=%s\n", (int)rctx.jcr->JobId, changer->hdr.name);
/* Find resource, and make sure we were able to open it */
- if (fnmatch(rctx.device_name, changer->hdr.name, 0) == 0) {
+ if (strcmp(rctx.device_name, changer->hdr.name) == 0) {
/* Try each device in this AutoChanger */
foreach_alist(rctx.device, changer->device) {
- Dmsg1(110, "Try changer device %s\n", rctx.device->hdr.name);
+ Dmsg2(dbglvl, "jid=%u Try changer device %s\n", (int)rctx.jcr->JobId,
+ rctx.device->hdr.name);
stat = reserve_device(rctx);
if (stat != 1) { /* try another device */
continue;
}
- POOL_MEM dev_name;
+ /* Debug code */
if (rctx.store->append == SD_APPEND) {
- Dmsg2(100, "Device %s reserved=%d for append.\n", rctx.device->hdr.name,
- rctx.jcr->dcr->dev->reserved_device);
- } else {
- Dmsg2(100, "Device %s reserved=%d for read.\n", rctx.device->hdr.name,
- rctx.jcr->read_dcr->dev->reserved_device);
- }
- if (rctx.notify_dir) {
- pm_strcpy(dev_name, rctx.device->hdr.name);
- bash_spaces(dev_name);
- ok = bnet_fsend(dir, OK_device, dev_name.c_str()); /* Return real device name */
- Dmsg1(100, ">dird changer: %s", dir->msg);
+ Dmsg3(dbglvl, "jid=%u Device %s reserved=%d for append.\n",
+ (int)rctx.jcr->JobId, rctx.device->hdr.name,
+ rctx.jcr->dcr->dev->num_reserved());
} else {
- ok = true;
+ Dmsg3(dbglvl, "jid=%u Device %s reserved=%d for read.\n",
+ (int)rctx.jcr->JobId, rctx.device->hdr.name,
+ rctx.jcr->read_dcr->dev->num_reserved());
}
- return ok ? 1 : -1;
+ return stat;
}
}
}
/* Now if requested look through regular devices */
if (!rctx.autochanger_only) {
foreach_res(rctx.device, R_DEVICE) {
- Dmsg1(150, "Try match res=%s\n", rctx.device->hdr.name);
+ Dmsg2(dbglvl, "jid=%u Try match res=%s\n", (int)rctx.jcr->JobId, rctx.device->hdr.name);
/* Find resource, and make sure we were able to open it */
- if (fnmatch(rctx.device_name, rctx.device->hdr.name, 0) == 0) {
+ if (strcmp(rctx.device_name, rctx.device->hdr.name) == 0) {
stat = reserve_device(rctx);
- if (stat != 1) {
- return stat;
+ if (stat != 1) { /* try another device */
+ continue;
}
- if (rctx.notify_dir) {
- bash_spaces(rctx.device_name);
- ok = bnet_fsend(dir, OK_device, rctx.device_name);
- Dmsg1(100, ">dird dev: %s", dir->msg);
+ /* Debug code */
+ if (rctx.store->append == SD_APPEND) {
+ Dmsg3(dbglvl, "jid=%u Device %s reserved=%d for append.\n",
+ (int)rctx.jcr->JobId, rctx.device->hdr.name,
+ rctx.jcr->dcr->dev->num_reserved());
} else {
- ok = true;
+ Dmsg3(dbglvl, "jid=%u Device %s reserved=%d for read.\n",
+ (int)rctx.jcr->JobId, rctx.device->hdr.name,
+ rctx.jcr->read_dcr->dev->num_reserved());
}
- return ok ? 1 : -1;
+ return stat;
}
}
}
const int name_len = MAX_NAME_LENGTH;
/* Make sure MediaType is OK */
- Dmsg2(110, "MediaType device=%s request=%s\n",
+ Dmsg3(dbglvl, "jid=%u chk MediaType device=%s request=%s\n",
+ (int)rctx.jcr->JobId,
rctx.device->media_type, rctx.store->media_type);
if (strcmp(rctx.device->media_type, rctx.store->media_type) != 0) {
return -1;
}
rctx.suitable_device = true;
- Dmsg2(110, "Try reserve %s JobId=%u\n", rctx.device->hdr.name,
- rctx.jcr->JobId);
- dcr = new_dcr(rctx.jcr, rctx.device->dev);
+ Dmsg1(dbglvl, "try reserve %s\n", rctx.device->hdr.name);
+ rctx.jcr->dcr = dcr = new_dcr(rctx.jcr, rctx.jcr->dcr, rctx.device->dev);
if (!dcr) {
BSOCK *dir = rctx.jcr->dir_bsock;
- bnet_fsend(dir, _("3926 Could not get dcr for device: %s\n"), rctx.device_name);
- Dmsg1(100, ">dird: %s", dir->msg);
+ dir->fsend(_("3926 Could not get dcr for device: %s\n"), rctx.device_name);
+ Dmsg1(dbglvl, ">dird: %s", dir->msg);
return -1;
}
bstrncpy(dcr->pool_name, rctx.store->pool_name, name_len);
bstrncpy(dcr->media_type, rctx.store->media_type, name_len);
bstrncpy(dcr->dev_name, rctx.device_name, name_len);
if (rctx.store->append == SD_APPEND) {
- if (rctx.exact_match && !rctx.have_volume) {
+ Dmsg3(dbglvl, "jid=%u have_vol=%d vol=%s\n", (int)rctx.jcr->JobId,
+ rctx.have_volume, rctx.VolumeName);
+ ok = reserve_device_for_append(dcr, rctx);
+ if (!ok) {
+ goto bail_out;
+ }
+
+ rctx.jcr->dcr = dcr;
+ Dmsg6(dbglvl, "jid=%u Reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
+ (int)rctx.jcr->JobId,
+ dcr->dev->num_reserved(),
+ dcr->dev_name, dcr->media_type, dcr->pool_name, ok);
+ if (rctx.have_volume) {
+ if (reserve_volume(dcr, rctx.VolumeName)) {
+ Dmsg2(dbglvl, "jid=%u Reserved vol=%s\n", jid(), rctx.VolumeName);
+ } else {
+ Dmsg2(dbglvl, "jid=%u Could not reserve vol=%s\n", jid(), rctx.VolumeName);
+ goto bail_out;
+ }
+ } else {
dcr->any_volume = true;
if (dir_find_next_appendable_volume(dcr)) {
bstrncpy(rctx.VolumeName, dcr->VolumeName, sizeof(rctx.VolumeName));
- Dmsg2(100, "JobId=%u looking for Volume=%s\n", rctx.jcr->JobId, rctx.VolumeName);
+ Dmsg2(dbglvl, "jid=%u looking for Volume=%s\n", (int)rctx.jcr->JobId, rctx.VolumeName);
rctx.have_volume = true;
} else {
- Dmsg0(100, "No next volume found\n");
+ Dmsg1(dbglvl, "jid=%u No next volume found\n", (int)rctx.jcr->JobId);
+ rctx.have_volume = false;
rctx.VolumeName[0] = 0;
- }
- }
- ok = reserve_device_for_append(dcr, rctx);
- if (ok) {
- rctx.jcr->dcr = dcr;
- Dmsg5(100, "Reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
- dcr->dev->reserved_device,
- dcr->dev_name, dcr->media_type, dcr->pool_name, ok);
+ /*
+ * If there is at least one volume that is valid and in use,
+ * but we get here, check if we are running with prefers
+ * non-mounted drives. In that case, we have selected a
+ * non-used drive and our one and only volume is mounted
+ * elsewhere, so we bail out and retry using that drive.
+ */
+ if (dcr->found_in_use() && !rctx.PreferMountedVols) {
+ rctx.PreferMountedVols = true;
+ if (dcr->VolumeName[0]) {
+ dcr->unreserve_device();
+ }
+ goto bail_out;
+ }
+ /*
+ * Note. Under some circumstances, the Director can hand us
+ * a Volume name that is not the same as the one on the current
+ * drive, and in that case, the call above to find the next
+ * volume will fail because in attempting to reserve the Volume
+ * the code will realize that we already have a tape mounted,
+ * and it will fail. This *should* only happen if there are
+ * writers, thus the following test. In that case, we simply
+ * bail out, and continue waiting, rather than plunging on
+ * and hoping that the operator can resolve the problem.
+ */
+ if (dcr->dev->num_writers != 0) {
+ if (dcr->VolumeName[0]) {
+ dcr->unreserve_device();
+ }
+ goto bail_out;
+ }
+ }
}
} else {
ok = reserve_device_for_read(dcr);
if (ok) {
rctx.jcr->read_dcr = dcr;
- Dmsg5(100, "Read reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
- dcr->dev->reserved_device,
+ Dmsg6(dbglvl, "jid=%u Read reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
+ (int)rctx.jcr->JobId,
+ dcr->dev->num_reserved(),
dcr->dev_name, dcr->media_type, dcr->pool_name, ok);
}
}
if (!ok) {
- free_dcr(dcr);
- Dmsg0(110, "Not OK.\n");
- return 0;
+ goto bail_out;
}
- return 1;
+
+ if (rctx.notify_dir) {
+ POOL_MEM dev_name;
+ BSOCK *dir = rctx.jcr->dir_bsock;
+ pm_strcpy(dev_name, rctx.device->hdr.name);
+ bash_spaces(dev_name);
+ ok = dir->fsend(OK_device, dev_name.c_str()); /* Return real device name */
+ Dmsg2(dbglvl, "jid=%u >dird changer: %s", jid(), dir->msg);
+ } else {
+ ok = true;
+ }
+ return ok ? 1 : -1;
+
+bail_out:
+ rctx.have_volume = false;
+ Dmsg1(dbglvl, "jid=%u Not OK.\n", (int)rctx.jcr->JobId);
+ rctx.VolumeName[0] = 0;
+ return 0;
}
/*
ASSERT(dcr);
- /* Get locks in correct order */
- unlock_reservations();
- P(dev->mutex);
- lock_reservations();
+ dev->dlock();
if (is_device_unmounted(dev)) {
- Dmsg1(200, "Device %s is BLOCKED due to user unmount.\n", dev->print_name());
+ Dmsg2(dbglvl, "jid=%u Device %s is BLOCKED due to user unmount.\n",
+ (int)jcr->JobId, dev->print_name());
Mmsg(jcr->errmsg, _("3601 JobId=%u device %s is BLOCKED due to user unmount.\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
}
if (dev->is_busy()) {
- Dmsg4(200, "Device %s is busy ST_READ=%d num_writers=%d reserved=%d.\n", dev->print_name(),
- dev->state & ST_READ?1:0, dev->num_writers, dev->reserved_device);
+ Dmsg5(dbglvl, "jid=%u Device %s is busy ST_READ=%d num_writers=%d reserved=%d.\n",
+ (int)jcr->JobId, dev->print_name(),
+ dev->state & ST_READ?1:0, dev->num_writers, dev->num_reserved());
Mmsg(jcr->errmsg, _("3602 JobId=%u device %s is busy (already reading/writing).\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
dev->clear_append();
dev->set_read();
ok = true;
- dev->reserved_device++;
- Dmsg3(100, "Inc reserve=%d dev=%s %p\n", dev->reserved_device,
- dev->print_name(), dev);
- dcr->reserved_device = true;
+ dcr->set_reserved();
bail_out:
- V(dev->mutex);
+ dev->dunlock();
return ok;
}
/*
* We reserve the device for appending by incrementing the
- * reserved_device. We do virtually all the same work that
+ * num_reserved(). We do virtually all the same work that
* is done in acquire_device_for_append(), but we do
* not attempt to mount the device. This routine allows
* the DIR to reserve multiple devices before *really*
ASSERT(dcr);
- /* Get locks in correct order */
- unlock_reservations();
- P(dev->mutex);
- lock_reservations();
+ dev->dlock();
/* If device is being read, we cannot write it */
if (dev->can_read()) {
Mmsg(jcr->errmsg, _("3603 JobId=%u device %s is busy reading.\n"),
jcr->JobId, dev->print_name());
- Dmsg1(110, "%s", jcr->errmsg);
+ Dmsg2(dbglvl, "jid=%u %s", jid(), jcr->errmsg);
queue_reserve_message(jcr);
goto bail_out;
}
if (is_device_unmounted(dev)) {
Mmsg(jcr->errmsg, _("3604 JobId=%u device %s is BLOCKED due to user unmount.\n"),
jcr->JobId, dev->print_name());
- Dmsg1(110, "%s", jcr->errmsg);
+ Dmsg2(dbglvl, "jid=%u %s", jid(), jcr->errmsg);
queue_reserve_message(jcr);
goto bail_out;
}
- Dmsg1(110, "reserve_append device is %s\n", dev->is_tape()?"tape":"disk");
+ Dmsg2(dbglvl, "jid=%u reserve_append device is %s\n", jid(), dev->print_name());
/* Now do detailed tests ... */
if (can_reserve_drive(dcr, rctx) != 1) {
- Dmsg0(110, "can_reserve_drive!=1\n");
+ Dmsg1(dbglvl, "jid=%u can_reserve_drive!=1\n", (int)jcr->JobId);
goto bail_out;
}
- dev->reserved_device++;
- Dmsg3(100, "Inc reserve=%d dev=%s %p\n", dev->reserved_device,
- dev->print_name(), dev);
- dcr->reserved_device = true;
+ dcr->set_reserved();
ok = true;
bail_out:
- V(dev->mutex);
+ dev->dunlock();
return ok;
}
+static int is_pool_ok(DCR *dcr)
+{
+ DEVICE *dev = dcr->dev;
+ JCR *jcr = dcr->jcr;
+
+ /* Now check if we want the same Pool and pool type */
+ if (strcmp(dev->pool_name, dcr->pool_name) == 0 &&
+ strcmp(dev->pool_type, dcr->pool_type) == 0) {
+ /* OK, compatible device */
+ Dmsg1(dbglvl, "OK dev: %s num_writers=0, reserved, pool matches\n", dev->print_name());
+ return 1;
+ } else {
+ /* Drive Pool not suitable for us */
+ Mmsg(jcr->errmsg, _(
+"3608 JobId=%u wants Pool=\"%s\" but have Pool=\"%s\" nreserve=%d on drive %s.\n"),
+ (uint32_t)jcr->JobId, dcr->pool_name, dev->pool_name,
+ dev->num_reserved(), dev->print_name());
+ queue_reserve_message(jcr);
+ Dmsg2(dbglvl, "failed: busy num_writers=0, reserved, pool=%s wanted=%s\n",
+ dev->pool_name, dcr->pool_name);
+ }
+ return 0;
+}
+
+static bool is_max_jobs_ok(DCR *dcr)
+{
+ DEVICE *dev = dcr->dev;
+ JCR *jcr = dcr->jcr;
+
+ Dmsg5(dbglvl, "MaxJobs=%d Jobs=%d reserves=%d Status=%s Vol=%s\n",
+ dcr->VolCatInfo.VolCatMaxJobs,
+ dcr->VolCatInfo.VolCatJobs, dev->num_reserved(),
+ dcr->VolCatInfo.VolCatStatus,
+ dcr->VolumeName);
+ if (strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") == 0) {
+ return true;
+ }
+ if (dcr->VolCatInfo.VolCatMaxJobs > 0 && dcr->VolCatInfo.VolCatMaxJobs <=
+ (dcr->VolCatInfo.VolCatJobs + dev->num_reserved())) {
+ /* Max Job Vols depassed or already reserved */
+ Mmsg(jcr->errmsg, _("3610 JobId=%u Volume max jobs exceeded on drive %s.\n"),
+ (uint32_t)jcr->JobId, dev->print_name());
+ queue_reserve_message(jcr);
+ Dmsg1(dbglvl, "reserve dev failed: %s", jcr->errmsg);
+ return false; /* wait */
+ }
+ return true;
+}
+
/*
* Returns: 1 if drive can be reserved
* 0 if we should wait
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
- Dmsg5(110, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
+ Dmsg6(dbglvl, "jid=%u PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
+ (int)jcr->JobId,
rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
rctx.autochanger_only, rctx.any_drive);
+ /* Check for max jobs on this Volume */
+ if (!is_max_jobs_ok(dcr)) {
+ return 0;
+ }
+
/* setting any_drive overrides PreferMountedVols flag */
if (!rctx.any_drive) {
/*
* helps spread the load to the least used drives.
*/
if (rctx.try_low_use_drive && dev == rctx.low_use_drive) {
- Dmsg3(110, "OK dev=%s == low_drive=%s. JobId=%u\n",
- dev->print_name(), rctx.low_use_drive->print_name(), jcr->JobId);
+ Dmsg3(dbglvl, "jid=%u OK dev=%s == low_drive=%s.\n",
+ jcr->JobId, dev->print_name(), rctx.low_use_drive->print_name());
return 1;
}
/* If he wants a free drive, but this one is busy, no go */
if (!rctx.PreferMountedVols && dev->is_busy()) {
/* Save least used drive */
- if ((dev->num_writers + dev->reserved_device) < rctx.num_writers) {
- rctx.num_writers = dev->num_writers + dev->reserved_device;
+ if ((dev->num_writers + dev->num_reserved()) < rctx.num_writers) {
+ rctx.num_writers = dev->num_writers + dev->num_reserved();
rctx.low_use_drive = dev;
- Dmsg2(110, "set low use drive=%s num_writers=%d\n", dev->print_name(),
- rctx.num_writers);
+ Dmsg3(dbglvl, "jid=%u set low use drive=%s num_writers=%d\n",
+ (int)jcr->JobId, dev->print_name(), rctx.num_writers);
} else {
- Dmsg1(110, "not low use num_writers=%d\n", dev->num_writers+
- dev->reserved_device);
+ Dmsg2(dbglvl, "jid=%u not low use num_writers=%d\n",
+ (int)jcr->JobId, dev->num_writers+dev->num_reserved());
}
- Dmsg1(110, "failed: !prefMnt && busy. JobId=%u\n", jcr->JobId);
+ Dmsg1(dbglvl, "jid=%u failed: !prefMnt && busy.\n", jcr->JobId);
Mmsg(jcr->errmsg, _("3605 JobId=%u wants free drive but device %s is busy.\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
}
/* Check for prefer mounted volumes */
- if (rctx.PreferMountedVols && !dev->VolHdr.VolumeName[0] && dev->is_tape()) {
+ if (rctx.PreferMountedVols && !dev->vol && dev->is_tape()) {
Mmsg(jcr->errmsg, _("3606 JobId=%u prefers mounted drives, but drive %s has no Volume.\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
- Dmsg1(110, "failed: want mounted -- no vol JobId=%u\n", jcr->JobId);
+ Dmsg1(dbglvl, "jid=%u failed: want mounted -- no vol\n", (uint32_t)jcr->JobId);
return 0; /* No volume mounted */
}
/* Check for exact Volume name match */
- if (rctx.exact_match && rctx.have_volume &&
- strcmp(dev->VolHdr.VolumeName, rctx.VolumeName) != 0) {
- Mmsg(jcr->errmsg, _("3607 JobId=%u wants Vol=\"%s\" drive has Vol=\"%s\" on drive %s.\n"),
- jcr->JobId, rctx.VolumeName, dev->VolHdr.VolumeName,
- dev->print_name());
- queue_reserve_message(jcr);
- Dmsg2(110, "failed: Not exact match have=%s want=%s\n",
- dev->VolHdr.VolumeName, rctx.VolumeName);
- return 0;
+ /* ***FIXME*** for Disk, we can accept any volume that goes with this
+ * drive.
+ */
+ if (rctx.exact_match && rctx.have_volume) {
+ bool ok;
+ Dmsg6(dbglvl, "jid=%u PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
+ (int)jcr->JobId,
+ rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
+ rctx.autochanger_only, rctx.any_drive);
+ Dmsg5(dbglvl, "jid=%u have_vol=%d have=%s resvol=%s want=%s\n",
+ (int)jcr->JobId, rctx.have_volume, dev->VolHdr.VolumeName,
+ dev->vol?dev->vol->vol_name:"*none*", rctx.VolumeName);
+ ok = strcmp(dev->VolHdr.VolumeName, rctx.VolumeName) == 0 ||
+ (dev->vol && strcmp(dev->vol->vol_name, rctx.VolumeName) == 0);
+ if (!ok) {
+ Mmsg(jcr->errmsg, _("3607 JobId=%u wants Vol=\"%s\" drive has Vol=\"%s\" on drive %s.\n"),
+ jcr->JobId, rctx.VolumeName, dev->VolHdr.VolumeName,
+ dev->print_name());
+ queue_reserve_message(jcr);
+ Dmsg4(dbglvl, "jid=%u not OK: dev have=%s resvol=%s want=%s\n", (int)jcr->JobId,
+ dev->VolHdr.VolumeName, dev->vol?dev->vol->vol_name:"*none*", rctx.VolumeName);
+ return 0;
+ }
+ if (!dcr->can_i_use_volume()) {
+ return 0; /* fail if volume on another drive */
+ }
}
}
/* Check for unused autochanger drive */
- if (rctx.autochanger_only && dev->num_writers == 0 &&
+ if (rctx.autochanger_only && !dev->is_busy() &&
dev->VolHdr.VolumeName[0] == 0) {
/* Device is available but not yet reserved, reserve it for us */
- Dmsg2(100, "OK Res Unused autochanger %s JobId=%u.\n",
- dev->print_name(), jcr->JobId);
+ Dmsg2(dbglvl, "jid=%u OK Res Unused autochanger %s.\n",
+ jcr->JobId, dev->print_name());
bstrncpy(dev->pool_name, dcr->pool_name, sizeof(dev->pool_name));
bstrncpy(dev->pool_type, dcr->pool_type, sizeof(dev->pool_type));
return 1; /* reserve drive */
*/
if (dev->num_writers == 0) {
/* Now check if there are any reservations on the drive */
- if (dev->reserved_device) {
- /* Now check if we want the same Pool and pool type */
- if (strcmp(dev->pool_name, dcr->pool_name) == 0 &&
- strcmp(dev->pool_type, dcr->pool_type) == 0) {
- /* OK, compatible device */
- Dmsg2(100, "OK dev: %s num_writers=0, reserved, pool matches JobId=%u\n",
- dev->print_name(), jcr->JobId);
- return 1;
- } else {
- /* Drive Pool not suitable for us */
- Mmsg(jcr->errmsg, _("3608 JobId=%u wants Pool=\"%s\" but have Pool=\"%s\" on drive %s.\n"),
- jcr->JobId, dcr->pool_name, dev->pool_name, dev->print_name());
- queue_reserve_message(jcr);
- Dmsg2(110, "failed: busy num_writers=0, reserved, pool=%s wanted=%s\n",
- dev->pool_name, dcr->pool_name);
- return 0; /* wait */
- }
+ if (dev->num_reserved()) {
+ return is_pool_ok(dcr);
} else if (dev->can_append()) {
- /* Device in append mode, check if changing pool */
- if (strcmp(dev->pool_name, dcr->pool_name) == 0 &&
- strcmp(dev->pool_type, dcr->pool_type) == 0) {
- Dmsg2(100, "OK dev: %s num_writers=0, can_append, pool matches. JobId=%u\n",
- dev->print_name(), jcr->JobId);
- /* OK, compatible device */
- return 1;
+ if (is_pool_ok(dcr)) {
+ return 1;
} else {
/* Changing pool, unload old tape if any in drive */
- Dmsg0(100, "OK dev: num_writers=0, not reserved, pool change, unload changer\n");
+ Dmsg1(dbglvl, "jid=%u OK dev: num_writers=0, not reserved, pool change, unload changer\n", (int)jcr->JobId);
+ /* ***FIXME*** use set_unload() */
unload_autochanger(dcr, 0);
}
}
/* Device is available but not yet reserved, reserve it for us */
- Dmsg2(100, "OK Dev avail reserved %s JobId=%u\n", dev->print_name(),
- jcr->JobId);
+ Dmsg2(dbglvl, "jid=%u OK Dev avail reserved %s\n", (int)jcr->JobId, dev->print_name());
bstrncpy(dev->pool_name, dcr->pool_name, sizeof(dev->pool_name));
bstrncpy(dev->pool_type, dcr->pool_type, sizeof(dev->pool_type));
return 1; /* reserve drive */
* available if pool is the same).
*/
if (dev->can_append() || dev->num_writers > 0) {
- /* Yes, now check if we want the same Pool and pool type */
- if (strcmp(dev->pool_name, dcr->pool_name) == 0 &&
- strcmp(dev->pool_type, dcr->pool_type) == 0) {
- Dmsg2(100, "OK dev: %s num_writers>=0, can_append, pool matches. JobId=%u\n",
- dev->print_name(), jcr->JobId);
- /* OK, compatible device */
- return 1;
- } else {
- /* Drive Pool not suitable for us */
- Mmsg(jcr->errmsg, _("3609 JobId=%u wants Pool=\"%s\" but has Pool=\"%s\" on drive %s.\n"),
- jcr->JobId, dcr->pool_name, dev->pool_name, dev->print_name());
- queue_reserve_message(jcr);
- Dmsg2(110, "failed: busy num_writers>0, can_append, pool=%s wanted=%s\n",
- dev->pool_name, dcr->pool_name);
- return 0; /* wait */
- }
+ return is_pool_ok(dcr);
} else {
- Pmsg0(000, _("Logic error!!!! Should not get here.\n"));
+ Pmsg1(000, _("Logic error!!!! JobId=%u Should not get here.\n"), (int)jcr->JobId);
Mmsg(jcr->errmsg, _("3910 JobId=%u Logic error!!!! drive %s Should not get here.\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
Mmsg(jcr->errmsg, _("3911 JobId=%u failed reserve drive %s.\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
- Dmsg2(110, "failed: No reserve %s JobId=%u\n", dev->print_name(), jcr->JobId);
+ Dmsg2(dbglvl, "jid=%u failed: No reserve %s\n", jcr->JobId, dev->print_name());
return 0;
}
+
+
+
/*
- * search_lock is already set on entering this routine
+ * Queue a reservation error or failure message for this jcr
*/
static void queue_reserve_message(JCR *jcr)
{
int i;
- alist *msgs = jcr->reserve_msgs;
+ alist *msgs;
char *msg;
+ jcr->lock();
+
+ msgs = jcr->reserve_msgs;
if (!msgs) {
- return;
+ goto bail_out;
}
/*
* Look for duplicate message. If found, do
for (i=msgs->size()-1; i >= 0; i--) {
msg = (char *)msgs->get(i);
if (!msg) {
- return;
+ goto bail_out;
}
/* Comparison based on 4 digit message number */
if (strncmp(msg, jcr->errmsg, 4) == 0) {
- return;
+ goto bail_out;
}
}
/* Message unique, so insert it */
jcr->reserve_msgs->push(bstrdup(jcr->errmsg));
+
+bail_out:
+ jcr->unlock();
}
/*
alist *msgs;
char *msg;
- lock_reservations();
+ jcr->lock();
msgs = jcr->reserve_msgs;
if (!msgs || msgs->size() == 0) {
- unlock_reservations();
- return;
+ goto bail_out;
}
for (i=msgs->size()-1; i >= 0; i--) {
msg = (char *)msgs->get(i);
break;
}
}
- unlock_reservations();
+
+bail_out:
+ jcr->unlock();
+}
+
+/*
+ * Pop and release any reservations messages
+ */
+static void pop_reserve_messages(JCR *jcr)
+{
+ alist *msgs;
+ char *msg;
+
+ jcr->lock();
+ msgs = jcr->reserve_msgs;
+ if (!msgs) {
+ goto bail_out;
+ }
+ while ((msg = (char *)msgs->pop())) {
+ free(msg);
+ }
+bail_out:
+ jcr->unlock();
+}
+
+/*
+ * Also called from acquire.c
+ */
+void release_reserve_messages(JCR *jcr)
+{
+ pop_reserve_messages(jcr);
+ jcr->lock();
+ if (!jcr->reserve_msgs) {
+ goto bail_out;
+ }
+ delete jcr->reserve_msgs;
+ jcr->reserve_msgs = NULL;
+
+bail_out:
+ jcr->unlock();
}