/*
Bacula® - The Network Backup Solution
- Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
+ Copyright (C) 2000-2009 Free Software Foundation Europe e.V.
The main author of Bacula is Kern Sibbald, with contributions from
many others, a complete list can be found in the file AUTHORS.
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
- Bacula® is a registered trademark of John Walker.
+ Bacula® is a registered trademark of Kern Sibbald.
The licensor of Bacula is the Free Software Foundation Europe
(FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
Switzerland, email:ftf@fsfeurope.org.
#include "bacula.h"
#include "stored.h"
-const int dbglvl = 50;
+const int dbglvl = 150;
-static dlist *vol_list = NULL;
static brwlock_t reservation_lock;
-static brwlock_t vol_list_lock;
/* Forward referenced functions */
static int can_reserve_drive(DCR *dcr, RCTX &rctx);
return true;
}
-static int my_compare(void *item1, void *item2)
-{
- return strcmp(((VOLRES *)item1)->vol_name, ((VOLRES *)item2)->vol_name);
-}
-
/*
* This allows a given thread to recursively call lock_reservations.
* It must, of course, call unlock_... the same number of times.
be.bstrerror(errstat));
}
- if ((errstat=rwl_init(&vol_list_lock)) != 0) {
- berrno be;
- Emsg1(M_ABORT, 0, _("Unable to initialize volume list lock. ERR=%s\n"),
- be.bstrerror(errstat));
- }
+ init_vol_list_lock();
}
void term_reservations_lock()
{
rwl_destroy(&reservation_lock);
- rwl_destroy(&vol_list_lock);
+ term_vol_list_lock();
}
int reservations_lock_count = 0;
}
}
-int vol_list_lock_count = 0;
-
-/*
- * This allows a given thread to recursively call to lock_volumes()
- */
-void _lock_volumes()
-{
- int errstat;
- vol_list_lock_count++;
- if ((errstat=rwl_writelock(&vol_list_lock)) != 0) {
- berrno be;
- Emsg2(M_ABORT, 0, "rwl_writelock failure. stat=%d: ERR=%s\n",
- errstat, be.bstrerror(errstat));
- }
-}
-
-void _unlock_volumes()
-{
- int errstat;
- vol_list_lock_count--;
- if ((errstat=rwl_writeunlock(&vol_list_lock)) != 0) {
- berrno be;
- Emsg2(M_ABORT, 0, "rwl_writeunlock failure. stat=%d: ERR=%s\n",
- errstat, be.bstrerror(errstat));
- }
-}
-
-
-/*
- * List Volumes -- this should be moved to status.c
- */
-enum {
- debug_lock = true,
- debug_nolock = false
-};
-
-static void debug_list_volumes(const char *imsg)
-{
- VOLRES *vol;
- POOL_MEM msg(PM_MESSAGE);
-
- lock_volumes();
- foreach_dlist(vol, vol_list) {
- if (vol->dev) {
- Mmsg(msg, "List %s: %s in_use=%d on device %s\n", imsg,
- vol->vol_name, vol->is_in_use(), vol->dev->print_name());
- } else {
- Mmsg(msg, "List %s: %s in_use=%d no dev\n", imsg, vol->vol_name,
- vol->is_in_use());
- }
- Dmsg1(dbglvl, "%s", msg.c_str());
- }
-
-#ifdef xxx
- DEVICE *dev = NULL;
- foreach_dlist(vol, vol_list) {
- if (vol->dev == dev) {
- Dmsg0(dbglvl, "Two Volumes on same device.\n");
- ASSERT(0);
- dev = vol->dev;
- }
- }
-#endif
-
- unlock_volumes();
-}
-
-
-/*
- * List Volumes -- this should be moved to status.c
- */
-void list_volumes(void sendit(const char *msg, int len, void *sarg), void *arg)
-{
- VOLRES *vol;
- POOL_MEM msg(PM_MESSAGE);
- int len;
-
- lock_volumes();
- foreach_dlist(vol, vol_list) {
- DEVICE *dev = vol->dev;
- if (dev) {
- len = Mmsg(msg, "%s on device %s\n", vol->vol_name, dev->print_name());
- sendit(msg.c_str(), len, arg);
- len = Mmsg(msg, " Reader=%d writers=%d devres=%d volinuse=%d\n",
- dev->can_read()?1:0, dev->num_writers, dev->num_reserved(),
- vol->is_in_use());
- sendit(msg.c_str(), len, arg);
- } else {
- len = Mmsg(msg, "%s no device. volinuse= %d\n", vol->vol_name,
- vol->is_in_use());
- sendit(msg.c_str(), len, arg);
- }
- }
- unlock_volumes();
-}
-
-/*
- * Create a Volume item to put in the Volume list
- * Ensure that the device points to it.
- */
-static VOLRES *new_vol_item(DCR *dcr, const char *VolumeName)
-{
- VOLRES *vol;
- vol = (VOLRES *)malloc(sizeof(VOLRES));
- memset(vol, 0, sizeof(VOLRES));
- vol->vol_name = bstrdup(VolumeName);
- vol->dev = dcr->dev;
- Dmsg3(dbglvl, "new Vol=%s at %p dev=%s\n",
- VolumeName, vol->vol_name, vol->dev->print_name());
- return vol;
-}
-
-static void free_vol_item(VOLRES *vol)
-{
- DEVICE *dev = NULL;
-
- free(vol->vol_name);
- if (vol->dev) {
- dev = vol->dev;
- }
- free(vol);
- if (dev) {
- dev->vol = NULL;
- }
-}
-
-/*
- * Put a new Volume entry in the Volume list. This
- * effectively reserves the volume so that it will
- * not be mounted again.
- *
- * If the device has any current volume associated with it,
- * and it is a different Volume, and the device is not busy,
- * we release the old Volume item and insert the new one.
- *
- * It is assumed that the device is free and locked so that
- * we can change the device structure.
- *
- * Some details of the Volume list handling:
- *
- * 1. The Volume list entry must be attached to the drive (rather than
- * attached to a job as it currently is. I.e. the drive that "owns"
- * the volume (in use, mounted)
- * must point to the volume (still to be maintained in a list).
- *
- * 2. The Volume is entered in the list when a drive is reserved.
- *
- * 3. When a drive is in use, the device code must appropriately update the
- * volume name as it changes (currently the list is static -- an entry is
- * removed when the Volume is no longer reserved, in use or mounted).
- * The new code must keep the same list entry as long as the drive
- * has any volume associated with it but the volume name in the list
- * must be updated when the drive has a different volume mounted.
- *
- * 4. A job that has reserved a volume, can un-reserve the volume, and if the
- * volume is not mounted, and not reserved, and not in use, it will be
- * removed from the list.
- *
- * 5. If a job wants to reserve a drive with a different Volume from the one on
- * the drive, it can re-use the drive for the new Volume.
- *
- * 6. If a job wants a Volume that is in a different drive, it can either use the
- * other drive or take the volume, only if the other drive is not in use or
- * not reserved.
- *
- * One nice aspect of this is that the reserve use count and the writer use count
- * already exist and are correctly programmed and will need no changes -- use
- * counts are always very tricky.
- *
- * The old code had a concept of "reserving" a Volume, but was changed
- * to reserving and using a drive. A volume is must be attached to (owned by) a
- * drive and can move from drive to drive or be unused given certain specific
- * conditions of the drive. The key is that the drive must "own" the Volume.
- * The old code had the job (dcr) owning the volume (more or less). The job was
- * to change the insertion and removal of the volumes from the list to be based
- * on the drive rather than the job.
- *
- * Return: VOLRES entry on success
- * NULL volume busy on another drive
- */
-VOLRES *reserve_volume(DCR *dcr, const char *VolumeName)
-{
- VOLRES *vol, *nvol;
- DEVICE * volatile dev = dcr->dev;
-
- ASSERT(dev != NULL);
-
- Dmsg2(dbglvl, "enter reserve_volume=%s drive=%s\n", VolumeName,
- dcr->dev->print_name());
- /*
- * We lock the reservations system here to ensure
- * when adding a new volume that no newly scheduled
- * job can reserve it.
- */
- lock_volumes();
- debug_list_volumes("begin reserve_volume");
- /*
- * First, remove any old volume attached to this device as it
- * is no longer used.
- */
- if (dev->vol) {
- vol = dev->vol;
- Dmsg4(dbglvl, "Vol attached=%s, newvol=%s volinuse=%d on %s\n",
- vol->vol_name, VolumeName, vol->is_in_use(), dev->print_name());
- /*
- * Make sure we don't remove the current volume we are inserting
- * because it was probably inserted by another job, or it
- * is not being used and is marked as not reserved.
- */
- if (strcmp(vol->vol_name, VolumeName) == 0) {
- Dmsg2(dbglvl, "=== set reserved vol=%s dev=%s\n", VolumeName,
- vol->dev->print_name());
- vol->set_in_use(); /* retake vol if released previously */
- dcr->reserved_volume = true; /* reserved volume */
- goto get_out; /* Volume already on this device */
- } else {
- /* Don't release a volume if it was reserved by someone other than us */
- if (vol->is_in_use() && !dcr->reserved_volume) {
- Dmsg1(dbglvl, "Cannot free vol=%s. It is reserved.\n", vol->vol_name);
- vol = NULL; /* vol in use */
- goto get_out;
- }
- Dmsg2(dbglvl, "reserve_vol free vol=%s at %p\n", vol->vol_name, vol->vol_name);
- free_volume(dev);
- dev->set_unload(); /* have to unload current volume */
- debug_list_volumes("reserve_vol free");
- }
- }
-
- /* Create a new Volume entry */
- nvol = new_vol_item(dcr, VolumeName);
-
- /*
- * Now try to insert the new Volume
- */
- vol = (VOLRES *)vol_list->binary_insert(nvol, my_compare);
- if (vol != nvol) {
- Dmsg2(dbglvl, "Found vol=%s dev-same=%d\n", vol->vol_name, dev==vol->dev);
- /*
- * At this point, a Volume with this name already is in the list,
- * so we simply release our new Volume entry. Note, this should
- * only happen if we are moving the volume from one drive to another.
- */
- Dmsg2(dbglvl, "reserve_vol free-tmp vol=%s at %p\n",
- vol->vol_name, vol->vol_name);
- /*
- * Clear dev pointer so that free_vol_item() doesn't
- * take away our volume.
- */
- nvol->dev = NULL; /* don't zap dev entry */
- free_vol_item(nvol);
-
- /*
- * Check if we are trying to use the Volume on a different drive
- * dev is our device
- * vol->dev is where the Volume we want is
- */
- if (dev != vol->dev) {
- /* Caller wants to switch Volume to another device */
- if (!vol->dev->is_busy() && !vol->is_swapping()) {
- int32_t slot;
- Dmsg3(dbglvl, "==== Swap vol=%s from dev=%s to %s\n",
- VolumeName, vol->dev->print_name(), dev->print_name());
- free_volume(dev); /* free any volume attached to our drive */
- dcr->dev = vol->dev; /* temp point to other dev */
- slot = get_autochanger_loaded_slot(dcr); /* get slot */
- dcr->dev = dev; /* restore dev */
- vol->set_slot(slot); /* save slot */
- vol->dev->set_unload(); /* unload the other drive */
- vol->set_swapping(); /* swap from other drive */
- dev->swap_dev = vol->dev; /* remember to get this vol */
- dev->set_load(); /* then reload on our drive */
- vol->dev->vol = NULL; /* remove volume from other drive */
- vol->dev = dev; /* point the Volume at our drive */
- dev->vol = vol; /* point our drive at the Volume */
- } else {
- Dmsg3(dbglvl, "==== Swap not possible Vol busy vol=%s from dev=%s to %s\n",
- VolumeName, vol->dev->print_name(), dev->print_name());
- vol = NULL; /* device busy */
- goto get_out;
- }
- } else {
- dev->vol = vol;
- }
- } else {
- dev->vol = vol; /* point to newly inserted volume */
- }
-
-get_out:
- if (vol) {
- Dmsg2(dbglvl, "=== set in_use. vol=%s dev=%s\n", vol->vol_name,
- vol->dev->print_name());
- vol->set_in_use();
- dcr->reserved_volume = true;
- }
- debug_list_volumes("end new volume");
- unlock_volumes();
- return vol;
-}
-
-/*
- * Switch from current device to given device
- * (not yet used)
- */
-#ifdef xxx
-void switch_device(DCR *dcr, DEVICE *dev)
-{
- DCR save_dcr;
-
- dev->dlock();
- memcpy(&save_dcr, dcr, sizeof(save_dcr));
- clean_device(dcr); /* clean up the dcr */
-
- dcr->dev = dev; /* get new device pointer */
- Jmsg(dcr->jcr, M_INFO, 0, _("Device switch. New device %s chosen.\n"),
- dcr->dev->print_name());
-
- bstrncpy(dcr->VolumeName, save_dcr.VolumeName, sizeof(dcr->VolumeName));
- bstrncpy(dcr->media_type, save_dcr.media_type, sizeof(dcr->media_type));
- dcr->VolCatInfo.Slot = save_dcr.VolCatInfo.Slot;
- bstrncpy(dcr->pool_name, save_dcr.pool_name, sizeof(dcr->pool_name));
- bstrncpy(dcr->pool_type, save_dcr.pool_type, sizeof(dcr->pool_type));
- bstrncpy(dcr->dev_name, dev->dev_name, sizeof(dcr->dev_name));
-
-// dcr->set_reserved();
-
- dev->dunlock();
-}
-#endif
-
-/*
- * Search for a Volume name in the Volume list.
- *
- * Returns: VOLRES entry on success
- * NULL if the Volume is not in the list
- */
-VOLRES *find_volume(const char *VolumeName)
-{
- VOLRES vol, *fvol;
- /* Do not lock reservations here */
- lock_volumes();
- vol.vol_name = bstrdup(VolumeName);
- fvol = (VOLRES *)vol_list->binary_search(&vol, my_compare);
- free(vol.vol_name);
- Dmsg2(dbglvl, "find_vol=%s found=%d\n", VolumeName, fvol!=NULL);
- debug_list_volumes("find_volume");
- unlock_volumes();
- return fvol;
-}
-
void DCR::set_reserved()
{
m_reserved = true;
unlock_volumes();
}
-/*
- * Free a Volume from the Volume list if it is no longer used
- * Note, for tape drives we want to remember where the Volume
- * was when last used, so rather than free the volume entry,
- * we simply mark it "not reserved" so when the drive is really
- * needed for another volume, we can reuse it.
- *
- * Returns: true if the Volume found and "removed" from the list
- * false if the Volume is not in the list or is in use
- */
-bool volume_unused(DCR *dcr)
-{
- DEVICE *dev = dcr->dev;
-
- if (!dev->vol) {
- Dmsg1(dbglvl, "vol_unused: no vol on %s\n", dev->print_name());
- debug_list_volumes("null vol cannot unreserve_volume");
- return false;
- }
- if (dev->vol->is_swapping()) {
- Dmsg1(dbglvl, "vol_unused: vol being swapped on %s\n", dev->print_name());
- debug_list_volumes("swapping vol cannot unreserve_volume");
- return false;
- }
-
-#ifdef xxx
- if (dev->is_busy()) {
- Dmsg1(dbglvl, "vol_unused: busy on %s\n", dev->print_name());
- debug_list_volumes("dev busy cannot unreserve_volume");
- return false;
- }
-#endif
-#ifdef xxx
- if (dev->num_writers > 0 || dev->num_reserved() > 0) {
- ASSERT(0);
- }
-#endif
-
- /*
- * If this is a tape, we do not free the volume, rather we wait
- * until the autoloader unloads it, or until another tape is
- * explicitly read in this drive. This allows the SD to remember
- * where the tapes are or last were.
- */
- Dmsg4(dbglvl, "=== set not reserved vol=%s num_writers=%d dev_reserved=%d dev=%s\n",
- dev->vol->vol_name, dev->num_writers, dev->num_reserved(), dev->print_name());
- dev->vol->clear_in_use();
- if (dev->is_tape() || dev->is_autochanger()) {
- return true;
- } else {
- /*
- * Note, this frees the volume reservation entry, but the
- * file descriptor remains open with the OS.
- */
- return free_volume(dev);
- }
-}
-
-/*
- * Unconditionally release the volume entry
- */
-bool free_volume(DEVICE *dev)
-{
- VOLRES *vol;
-
- if (dev->vol == NULL) {
- Dmsg1(dbglvl, "No vol on dev %s\n", dev->print_name());
- return false;
- }
- lock_volumes();
- vol = dev->vol;
- /* Don't free a volume while it is being swapped */
- if (!vol->is_swapping()) {
- dev->vol = NULL;
- vol_list->remove(vol);
- Dmsg2(dbglvl, "=== free_volume %s dev=%s\n", vol->vol_name, dev->print_name());
- free_vol_item(vol);
- debug_list_volumes("free_volume");
- }
- unlock_volumes();
- return true;
-}
-
-
-/* Create the Volume list */
-void create_volume_list()
-{
- VOLRES *vol = NULL;
- if (vol_list == NULL) {
- vol_list = New(dlist(vol, &vol->link));
- }
-}
-
-/* Release all Volumes from the list */
-void free_volume_list()
-{
- VOLRES *vol;
- if (!vol_list) {
- return;
- }
- lock_volumes();
- foreach_dlist(vol, vol_list) {
- if (vol->dev) {
- Dmsg2(dbglvl, "free vol_list Volume=%s dev=%s\n", vol->vol_name, vol->dev->print_name());
- } else {
- Dmsg1(dbglvl, "free vol_list Volume=%s No dev\n", vol->vol_name);
- }
- free(vol->vol_name);
- vol->vol_name = NULL;
- }
- delete vol_list;
- vol_list = NULL;
- unlock_volumes();
-}
-
-bool DCR::can_i_use_volume()
-{
- bool rtn = true;
- VOLRES *vol;
-
- lock_volumes();
- vol = find_volume(VolumeName);
- if (!vol) {
- Dmsg1(dbglvl, "Vol=%s not in use.\n", VolumeName);
- goto get_out; /* vol not in list */
- }
- ASSERT(vol->dev != NULL);
-
- if (dev == vol->dev) { /* same device OK */
- Dmsg1(dbglvl, "Vol=%s on same dev.\n", VolumeName);
- goto get_out;
- } else {
- Dmsg3(dbglvl, "Vol=%s on %s we have %s\n", VolumeName,
- vol->dev->print_name(), dev->print_name());
- }
- /* ***FIXME*** check this ... */
- if (!vol->dev->is_busy()) {
- Dmsg2(dbglvl, "Vol=%s dev=%s not busy.\n", VolumeName, vol->dev->print_name());
- goto get_out;
- } else {
- Dmsg2(dbglvl, "Vol=%s dev=%s busy.\n", VolumeName, vol->dev->print_name());
- }
- Dmsg2(dbglvl, "Vol=%s in use by %s.\n", VolumeName, vol->dev->print_name());
- rtn = false;
-
-get_out:
- unlock_volumes();
- return rtn;
-
-}
-
-
/*
* We get the following type of information:
*
*/
unbash_spaces(dir->msg);
pm_strcpy(jcr->errmsg, dir->msg);
- Jmsg(jcr, M_INFO, 0, _("Failed command: %s\n"), jcr->errmsg);
- Jmsg(jcr, M_FATAL, 0, _("\n"
- " Device \"%s\" with MediaType \"%s\" requested by DIR not found in SD Device resources.\n"),
- dev_name.c_str(), media_type.c_str());
+ Jmsg(jcr, M_FATAL, 0, _("Device reservation failed for JobId=%d: %s\n"),
+ jcr->JobId, jcr->errmsg);
dir->fsend(NO_device, dev_name.c_str());
Dmsg1(dbglvl, ">dird: %s", dir->msg);
* force try a mounted drive because they are all busy), we
* start by looking at all the Volumes in the volume list.
*/
- if (!vol_list->empty() && rctx.append && rctx.PreferMountedVols) {
- dlist *temp_vol_list, *save_vol_list;
+ if (!is_vol_list_empty() && rctx.append && rctx.PreferMountedVols) {
+ dlist *temp_vol_list;
VOLRES *vol = NULL;
- lock_volumes();
- Dmsg0(dbglvl, "lock volumes\n");
-
- /*
- * Create a temporary copy of the volume list. We do this,
- * to avoid having the volume list locked during the
- * call to reserve_device(), which would cause a deadlock.
- * Note, we may want to add an update counter on the vol_list
- * so that if it is modified while we are traversing the copy
- * we can take note and act accordingly (probably redo the
- * search at least a few times).
- */
- Dmsg0(dbglvl, "duplicate vol list\n");
- temp_vol_list = New(dlist(vol, &vol->link));
- foreach_dlist(vol, vol_list) {
- VOLRES *nvol;
- VOLRES *tvol = (VOLRES *)malloc(sizeof(VOLRES));
- memset(tvol, 0, sizeof(VOLRES));
- tvol->vol_name = bstrdup(vol->vol_name);
- tvol->dev = vol->dev;
- nvol = (VOLRES *)temp_vol_list->binary_insert(tvol, my_compare);
- if (tvol != nvol) {
- tvol->dev = NULL; /* don't zap dev entry */
- free_vol_item(tvol);
- Pmsg0(000, "Logic error. Duplicating vol list hit duplicate.\n");
- Jmsg(jcr, M_WARNING, 0, "Logic error. Duplicating vol list hit duplicate.\n");
- }
- }
- Dmsg0(dbglvl, "unlock volumes\n");
- unlock_volumes();
+ temp_vol_list = dup_vol_list(jcr);
/* Look through reserved volumes for one we can use */
Dmsg0(dbglvl, "look for vol in vol list\n");
} /* end for loop over reserved volumes */
Dmsg0(dbglvl, "lock volumes\n");
- lock_volumes();
- save_vol_list = vol_list;
- vol_list = temp_vol_list;
- free_volume_list(); /* release temp_vol_list */
- vol_list = save_vol_list;
- Dmsg0(dbglvl, "deleted temp vol list\n");
- Dmsg0(dbglvl, "unlock volumes\n");
- unlock_volumes();
- debug_list_volumes("=== After free temp table\n");
+ free_temp_vol_list(temp_vol_list);
}
if (ok) {
Dmsg1(dbglvl, "OK dev found. Vol=%s from in-use vols list\n", rctx.VolumeName);
/* Try each device in this AutoChanger */
foreach_alist(rctx.device, changer->device) {
Dmsg1(dbglvl, "Try changer device %s\n", rctx.device->hdr.name);
+ if (!rctx.device->autoselect) {
+ Dmsg1(100, "Device %s not autoselect skipped.\n",
+ rctx.device->hdr.name);
+ continue; /* device is not available */
+ }
stat = reserve_device(rctx);
if (stat != 1) { /* try another device */
continue;
rctx.suitable_device = true;
Dmsg1(dbglvl, "try reserve %s\n", rctx.device->hdr.name);
- rctx.jcr->dcr = dcr = new_dcr(rctx.jcr, rctx.jcr->dcr, rctx.device->dev);
+ if (rctx.store->append) {
+ dcr = new_dcr(rctx.jcr, rctx.jcr->dcr, rctx.device->dev);
+ } else {
+ dcr = new_dcr(rctx.jcr, rctx.jcr->read_dcr, rctx.device->dev);
+ }
if (!dcr) {
BSOCK *dir = rctx.jcr->dir_bsock;
dir->fsend(_("3926 Could not get dcr for device: %s\n"), rctx.device_name);
bool ok = false;
ASSERT(dcr);
+ if (job_canceled(jcr)) {
+ return false;
+ }
dev->dlock();
- if (is_device_unmounted(dev)) {
+ if (dev->is_device_unmounted()) {
Dmsg1(dbglvl, "Device %s is BLOCKED due to user unmount.\n", dev->print_name());
Mmsg(jcr->errmsg, _("3601 JobId=%u device %s is BLOCKED due to user unmount.\n"),
jcr->JobId, dev->print_name());
bool ok = false;
ASSERT(dcr);
+ if (job_canceled(jcr)) {
+ return false;
+ }
dev->dlock();
}
/* If device is unmounted, we are out of luck */
- if (is_device_unmounted(dev)) {
+ if (dev->is_device_unmounted()) {
Mmsg(jcr->errmsg, _("3604 JobId=%u device %s is BLOCKED due to user unmount.\n"),
jcr->JobId, dev->print_name());
Dmsg1(dbglvl, "%s", jcr->errmsg);
dcr->VolCatInfo.VolCatJobs, dev->num_reserved(),
dcr->VolCatInfo.VolCatStatus,
dcr->VolumeName);
+ /* Limit max concurrent jobs on this drive */
+ if (dev->max_concurrent_jobs > 0 && dev->max_concurrent_jobs <=
+ (uint32_t)(dev->num_writers + dev->num_reserved())) {
+ /* Max Concurrent Jobs depassed or already reserved */
+ Mmsg(jcr->errmsg, _("3609 JobId=%u Max concurrent jobs exceeded on drive %s.\n"),
+ (uint32_t)jcr->JobId, dev->print_name());
+ queue_reserve_message(jcr);
+ Dmsg1(dbglvl, "reserve dev failed: %s", jcr->errmsg);
+ return false;
+ }
if (strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") == 0) {
return true;
}
/* Changing pool, unload old tape if any in drive */
Dmsg0(dbglvl, "OK dev: num_writers=0, not reserved, pool change, unload changer\n");
/* ***FIXME*** use set_unload() */
- unload_autochanger(dcr, 0);
+ unload_autochanger(dcr, -1);
}
}
/* Device is available but not yet reserved, reserve it for us */
projects / bacula / bacula / blobdiff