static bool use_storage_cmd(JCR *jcr);
static void queue_reserve_message(JCR *jcr);
static void pop_reserve_messages(JCR *jcr);
+//void switch_device(DCR *dcr, DEVICE *dev);
/* Requests from the Director daemon */
static char use_storage[] = "use storage=%127s media_type=%127s "
lock_volumes();
foreach_dlist(vol, vol_list) {
if (vol->dev) {
- Mmsg(msg, "List %s: %s rel=%d on device %s\n", imsg,
- vol->vol_name, vol->released, vol->dev->print_name());
+ Mmsg(msg, "List %s: %s in_use=%d on device %s\n", imsg,
+ vol->vol_name, vol->is_in_use(), vol->dev->print_name());
} else {
- Mmsg(msg, "List %s: %s rel=%d no dev\n", imsg, vol->vol_name, vol->released);
+ Mmsg(msg, "List %s: %s in_use=%d no dev\n", imsg, vol->vol_name,
+ vol->is_in_use());
}
Dmsg1(dbglvl, "%s", msg.c_str());
}
}
#endif
-// Dmsg2(dbglvl, "List from %s: %d volumes\n", imsg, count);
unlock_volumes();
}
if (dev) {
len = Mmsg(msg, "%s on device %s\n", vol->vol_name, dev->print_name());
sendit(msg.c_str(), len, arg);
- len = Mmsg(msg, " Reader=%d writers=%d reserved=%d released=%d\n",
- dev->can_read()?1:0, dev->num_writers, dev->reserved_device, vol->released);
+ len = Mmsg(msg, " Reader=%d writers=%d devres=%d volinuse=%d\n",
+ dev->can_read()?1:0, dev->num_writers, dev->num_reserved(),
+ vol->is_in_use());
sendit(msg.c_str(), len, arg);
} else {
- len = Mmsg(msg, "%s no device. released=%d\n", vol->vol_name, vol->released);
+ len = Mmsg(msg, "%s no device. volinuse= %d\n", vol->vol_name,
+ vol->is_in_use());
sendit(msg.c_str(), len, arg);
}
}
static void free_vol_item(VOLRES *vol)
{
+ DEVICE *dev = NULL;
+
free(vol->vol_name);
if (vol->dev) {
- vol->dev->vol = NULL;
+ dev = vol->dev;
}
free(vol);
+ if (dev) {
+ dev->vol = NULL;
+ }
}
-
/*
* Put a new Volume entry in the Volume list. This
* effectively reserves the volume so that it will
*
* 1. The Volume list entry must be attached to the drive (rather than
* attached to a job as it currently is. I.e. the drive that "owns"
- * the volume (reserved, in use, mounted)
+ * the volume (in use, mounted)
* must point to the volume (still to be maintained in a list).
*
* 2. The Volume is entered in the list when a drive is reserved.
VOLRES *reserve_volume(DCR *dcr, const char *VolumeName)
{
VOLRES *vol, *nvol;
- DEVICE *dev = dcr->dev;
+ DEVICE * volatile dev = dcr->dev;
ASSERT(dev != NULL);
- Dmsg1(dbglvl, "enter reserve_volume %s\n", VolumeName);
+ Dmsg2(dbglvl, "enter reserve_volume=%s drive=%s\n", VolumeName,
+ dcr->dev->print_name());
/*
* We lock the reservations system here to ensure
* when adding a new volume that no newly scheduled
*/
if (dev->vol) {
vol = dev->vol;
- Dmsg4(dbglvl, "Vol attached=%s, newvol=%s release=%d on %s\n",
- vol->vol_name, VolumeName, vol->released, dev->print_name());
+ Dmsg4(dbglvl, "Vol attached=%s, newvol=%s volinuse=%d on %s\n",
+ vol->vol_name, VolumeName, vol->is_in_use(), dev->print_name());
/*
* Make sure we don't remove the current volume we are inserting
* because it was probably inserted by another job, or it
- * is not being used and is marked as released.
+ * is not being used and is marked as not reserved.
*/
if (strcmp(vol->vol_name, VolumeName) == 0) {
- Dmsg1(dbglvl, "=== OK, vol=%s on device. set not released.\n", VolumeName);
+ Dmsg2(dbglvl, "=== set reserved vol=%s dev=%s\n", VolumeName,
+ vol->dev->print_name());
+ vol->set_in_use(); /* retake vol if released previously */
+ dcr->reserved_volume = true; /* reserved volume */
goto get_out; /* Volume already on this device */
} else {
+ /* Don't release a volume if it was reserved by someone other than us */
+ if (vol->is_in_use() && !dcr->reserved_volume) {
+ Dmsg1(dbglvl, "Cannot free vol=%s. It is reserved.\n", vol->vol_name);
+ vol = NULL; /* vol in use */
+ goto get_out;
+ }
Dmsg2(dbglvl, "reserve_vol free vol=%s at %p\n", vol->vol_name, vol->vol_name);
- unload_autochanger(dcr, -1); /* unload the volume */
free_volume(dev);
+ dev->set_unload(); /* have to unload current volume */
debug_list_volumes("reserve_vol free");
}
}
* Clear dev pointer so that free_vol_item() doesn't
* take away our volume.
*/
- nvol->dev = NULL; /* don't zap dev entry */
+ nvol->dev = NULL; /* don't zap dev entry */
free_vol_item(nvol);
/* Check if we are trying to use the Volume on a different drive */
if (dev != vol->dev) {
/* Caller wants to switch Volume to another device */
- if (!vol->dev->is_busy()) {
- /* OK to move it -- I'm not sure this will work */
- Dmsg3(dbglvl, "==== Swap vol=%s from dev=%s to %s\n", VolumeName,
- vol->dev->print_name(), dev->print_name());
- vol->dev->vol = NULL; /* take vol from old drive */
- vol->dev->VolHdr.VolumeName[0] = 0;
- vol->dev = dev; /* point vol at new drive */
- dev->vol = vol; /* point dev at vol */
- dev->VolHdr.VolumeName[0] = 0;
+ if (!vol->dev->is_busy() && !vol->is_swapping()) {
+ Dmsg3(dbglvl, "==== Swap vol=%s from dev=%s to %s\n",
+ VolumeName, vol->dev->print_name(), dev->print_name());
+ free_volume(dev); /* free any volume attached to our drive */
+ vol->dev->set_unload(); /* unload our drive */
+ vol->set_swapping(); /* swap from other drive */
+ dev->swap_dev = vol->dev; /* remember to get this vol */
+ vol->dev->set_load(); /* then reload on our drive */
+ vol->dev->vol = NULL; /* remove volume from other drive */
+ vol->dev = dev; /* point it at our drive */
+ dev->vol = vol; /* point our drive at it */
+ Dmsg3(dbglvl, "==== Swap vol=%s from dev=%s to %s\n",
+ VolumeName, vol->dev->print_name(), dev->print_name());
} else {
- Dmsg3(dbglvl, "Volume busy could not swap vol=%s from dev=%s to %s\n",
+ Dmsg3(dbglvl, "==== Swap not possible Vol busy vol=%s from dev=%s to %s\n",
VolumeName, vol->dev->print_name(), dev->print_name());
- vol = NULL; /* device busy */
+ vol = NULL; /* device busy */
goto get_out;
}
+ } else {
+ dev->vol = vol;
}
+ } else {
+ dev->vol = vol; /* point to newly inserted volume */
}
- dev->vol = vol;
get_out:
if (vol) {
- Dmsg1(dbglvl, "=== set not released. vol=%s\n", vol->vol_name);
- vol->released = false;
+ Dmsg2(dbglvl, "=== set in_use. vol=%s dev=%s\n", vol->vol_name,
+ vol->dev->print_name());
+ vol->set_in_use();
+ dcr->reserved_volume = true;
}
debug_list_volumes("end new volume");
unlock_volumes();
* Switch from current device to given device
* (not yet used)
*/
+#ifdef xxx
void switch_device(DCR *dcr, DEVICE *dev)
{
- // lock_reservations();
DCR save_dcr;
dev->dlock();
dcr->VolCatInfo.Slot = save_dcr.VolCatInfo.Slot;
bstrncpy(dcr->pool_name, save_dcr.pool_name, sizeof(dcr->pool_name));
bstrncpy(dcr->pool_type, save_dcr.pool_type, sizeof(dcr->pool_type));
- bstrncpy(dcr->dev_name, save_dcr.dev_name, sizeof(dcr->dev_name));
+ bstrncpy(dcr->dev_name, dev->dev_name, sizeof(dcr->dev_name));
- dev->reserved_device++;
- dcr->reserved_device = true;
+// dcr->set_reserved();
dev->dunlock();
}
+#endif
/*
* Search for a Volume name in the Volume list.
* Returns: VOLRES entry on success
* NULL if the Volume is not in the list
*/
-VOLRES *find_volume(DCR *dcr)
+VOLRES *find_volume(const char *VolumeName)
{
VOLRES vol, *fvol;
/* Do not lock reservations here */
lock_volumes();
- vol.vol_name = bstrdup(dcr->VolumeName);
+ vol.vol_name = bstrdup(VolumeName);
fvol = (VOLRES *)vol_list->binary_search(&vol, my_compare);
free(vol.vol_name);
- Dmsg2(dbglvl, "find_vol=%s found=%d\n", dcr->VolumeName, fvol!=NULL);
+ Dmsg2(dbglvl, "find_vol=%s found=%d\n", VolumeName, fvol!=NULL);
debug_list_volumes("find_volume");
unlock_volumes();
return fvol;
}
+void DCR::set_reserved()
+{
+ m_reserved = true;
+ Dmsg2(dbglvl, "Inc reserve=%d dev=%s\n", dev->num_reserved(), dev->print_name());
+ dev->inc_reserved();
+}
+
+void DCR::clear_reserved()
+{
+ if (m_reserved) {
+ m_reserved = false;
+ dev->dec_reserved();
+ Dmsg2(dbglvl, "Dec reserve=%d dev=%s\n", dev->num_reserved(), dev->print_name());
+ }
+}
+
/*
* Remove any reservation from a drive and tell the system
* that the volume is unused at least by us.
*/
-void unreserve_device(DCR *dcr)
+void DCR::unreserve_device()
{
- DEVICE *dev = dcr->dev;
- if (dcr->reserved_device) {
- dcr->reserved_device = false;
- dev->reserved_device--;
- Dmsg2(dbglvl, "Dec reserve=%d dev=%s\n", dev->reserved_device, dev->print_name());
- dcr->reserved_device = false;
+ lock_volumes();
+ if (is_reserved()) {
+ clear_reserved();
+ reserved_volume = false;
/* If we set read mode in reserving, remove it */
if (dev->can_read()) {
dev->clear_read();
}
if (dev->num_writers < 0) {
- Jmsg1(dcr->jcr, M_ERROR, 0, _("Hey! num_writers=%d!!!!\n"), dev->num_writers);
+ Jmsg1(jcr, M_ERROR, 0, _("Hey! num_writers=%d!!!!\n"), dev->num_writers);
dev->num_writers = 0;
}
+ if (dev->num_reserved() == 0 && dev->num_writers == 0) {
+ volume_unused(this);
+ }
}
-
- volume_unused(dcr);
+ unlock_volumes();
}
/*
* Free a Volume from the Volume list if it is no longer used
* Note, for tape drives we want to remember where the Volume
* was when last used, so rather than free the volume entry,
- * we simply mark it "released" so when the drive is really
+ * we simply mark it "not reserved" so when the drive is really
* needed for another volume, we can reuse it.
*
* Returns: true if the Volume found and "removed" from the list
{
DEVICE *dev = dcr->dev;
- if (dev->vol == NULL) {
+ if (!dev->vol) {
Dmsg1(dbglvl, "vol_unused: no vol on %s\n", dev->print_name());
debug_list_volumes("null vol cannot unreserve_volume");
return false;
}
+ if (dev->vol->is_swapping()) {
+ Dmsg1(dbglvl, "vol_unused: vol being swapped on %s\n", dev->print_name());
+ debug_list_volumes("swapping vol cannot unreserve_volume");
+ return false;
+ }
+#ifdef xxx
if (dev->is_busy()) {
Dmsg1(dbglvl, "vol_unused: busy on %s\n", dev->print_name());
debug_list_volumes("dev busy cannot unreserve_volume");
return false;
}
+#endif
#ifdef xxx
- if (dev->num_writers > 0 || dev->reserved_device > 0) {
+ if (dev->num_writers > 0 || dev->num_reserved() > 0) {
ASSERT(0);
}
#endif
* explicitly read in this drive. This allows the SD to remember
* where the tapes are or last were.
*/
- Dmsg3(dbglvl, "=== mark released vol=%s num_writers=%d reserved=%d\n",
- dev->vol->vol_name, dev->num_writers, dev->reserved_device);
- dev->vol->released = true;
+ Dmsg4(dbglvl, "=== set not reserved vol=%s num_writers=%d dev_reserved=%d dev=%s\n",
+ dev->vol->vol_name, dev->num_writers, dev->num_reserved(), dev->print_name());
+ dev->vol->clear_in_use();
if (dev->is_tape() || dev->is_autochanger()) {
return true;
} else {
free_vol_item(vol);
debug_list_volumes("free_volume");
unlock_volumes();
- return vol != NULL;
+ return true;
}
unlock_volumes();
}
-bool is_volume_in_use(DCR *dcr)
+bool DCR::can_i_use_volume()
{
- VOLRES *vol = find_volume(dcr);
+ bool rtn = true;
+ VOLRES *vol;
+
+ lock_volumes();
+ vol = find_volume(VolumeName);
if (!vol) {
- Dmsg1(dbglvl, "Vol=%s not in use.\n", dcr->VolumeName);
- return false; /* vol not in list */
+ Dmsg1(dbglvl, "Vol=%s not in use.\n", VolumeName);
+ goto get_out; /* vol not in list */
}
ASSERT(vol->dev != NULL);
- if (dcr->dev == vol->dev) { /* same device OK */
- Dmsg1(dbglvl, "Vol=%s on same dev.\n", dcr->VolumeName);
- return false;
+ if (dev == vol->dev) { /* same device OK */
+ Dmsg1(dbglvl, "Vol=%s on same dev.\n", VolumeName);
+ goto get_out;
} else {
- Dmsg3(dbglvl, "Vol=%s on %s we have %s\n", dcr->VolumeName,
- vol->dev->print_name(), dcr->dev->print_name());
+ Dmsg3(dbglvl, "Vol=%s on %s we have %s\n", VolumeName,
+ vol->dev->print_name(), dev->print_name());
}
+ /* ***FIXME*** check this ... */
if (!vol->dev->is_busy()) {
- Dmsg2(dbglvl, "Vol=%s dev=%s not busy.\n", dcr->VolumeName, vol->dev->print_name());
- return false;
+ Dmsg2(dbglvl, "Vol=%s dev=%s not busy.\n", VolumeName, vol->dev->print_name());
+ goto get_out;
} else {
- Dmsg2(dbglvl, "Vol=%s dev=%s busy.\n", dcr->VolumeName, vol->dev->print_name());
+ Dmsg2(dbglvl, "Vol=%s dev=%s busy.\n", VolumeName, vol->dev->print_name());
}
- Dmsg2(dbglvl, "Vol=%s in use by %s.\n", dcr->VolumeName, vol->dev->print_name());
- return true;
+ Dmsg2(dbglvl, "Vol=%s in use by %s.\n", VolumeName, vol->dev->print_name());
+ rtn = false;
+
+get_out:
+ unlock_volumes();
+ return rtn;
+
}
rctx.PreferMountedVols = false;
rctx.exact_match = false;
rctx.autochanger_only = true;
- Dmsg5(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
rctx.try_low_use_drive = false;
}
rctx.autochanger_only = false;
- Dmsg5(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
rctx.PreferMountedVols = true;
rctx.exact_match = true;
rctx.autochanger_only = false;
- Dmsg5(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/* Look for any mounted drive */
rctx.exact_match = false;
- Dmsg5(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/* Try any drive */
rctx.any_drive = true;
- Dmsg5(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only, rctx.any_drive);
if ((ok = find_suitable_device_for_job(jcr, rctx))) {
break;
}
/*
* Search for a device suitable for this job.
+ * Note, this routine sets sets rctx.suitable_device if any
+ * device exists within the SD. The device may not be actually
+ * useable.
+ * It also returns if it finds a useable device.
*/
bool find_suitable_device_for_job(JCR *jcr, RCTX &rctx)
{
} else {
dirstore = jcr->read_store;
}
- Dmsg4(dbglvl, "PrefMnt=%d exact=%d suitable=%d chgronly=%d\n",
- rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
- rctx.autochanger_only);
+ Dmsg5(dbglvl, "Start find_suit_dev PrefMnt=%d exact=%d suitable=%d chgronly=%d any=%d\n",
+ rctx.PreferMountedVols, rctx.exact_match, rctx.suitable_device,
+ rctx.autochanger_only, rctx.any_drive);
/*
* If the appropriate conditions of this if are met, namely that
debug_list_volumes("=== After free temp table\n");
}
if (ok) {
- Dmsg1(dbglvl, "got vol %s from in-use vols list\n", rctx.VolumeName);
+ Dmsg1(dbglvl, "OK dev found. Vol=%s from in-use vols list\n", rctx.VolumeName);
return true;
}
ok = true;
break;
} else if (stat == 0) { /* device busy */
- Dmsg1(dbglvl, "Suitable device=%s, busy: not use\n", device_name);
+ Dmsg1(dbglvl, "No usable device=%s, busy: not use\n", device_name);
} else {
/* otherwise error */
- Dmsg0(dbglvl, "No suitable device found.\n");
+ Dmsg0(dbglvl, "No usable device found.\n");
}
}
if (ok) {
break;
}
}
+ if (ok) {
+ Dmsg1(dbglvl, "OK dev found. Vol=%s\n", rctx.VolumeName);
+ } else {
+ Dmsg0(dbglvl, "Leave find_suit_dev: no dev found.\n");
+ }
return ok;
}
/* Debug code */
if (rctx.store->append == SD_APPEND) {
Dmsg2(dbglvl, "Device %s reserved=%d for append.\n",
- rctx.device->hdr.name, rctx.jcr->dcr->dev->reserved_device);
+ rctx.device->hdr.name, rctx.jcr->dcr->dev->num_reserved());
} else {
Dmsg2(dbglvl, "Device %s reserved=%d for read.\n",
- rctx.device->hdr.name, rctx.jcr->read_dcr->dev->reserved_device);
+ rctx.device->hdr.name, rctx.jcr->read_dcr->dev->num_reserved());
}
return stat;
}
/* Debug code */
if (rctx.store->append == SD_APPEND) {
Dmsg2(dbglvl, "Device %s reserved=%d for append.\n",
- rctx.device->hdr.name, rctx.jcr->dcr->dev->reserved_device);
+ rctx.device->hdr.name, rctx.jcr->dcr->dev->num_reserved());
} else {
Dmsg2(dbglvl, "Device %s reserved=%d for read.\n",
- rctx.device->hdr.name, rctx.jcr->read_dcr->dev->reserved_device);
+ rctx.device->hdr.name, rctx.jcr->read_dcr->dev->num_reserved());
}
return stat;
}
rctx.jcr->dcr = dcr;
Dmsg5(dbglvl, "Reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
- dcr->dev->reserved_device,
+ dcr->dev->num_reserved(),
dcr->dev_name, dcr->media_type, dcr->pool_name, ok);
Dmsg3(dbglvl, "Vol=%s num_writers=%d, have_vol=%d\n",
rctx.VolumeName, dcr->dev->num_writers, rctx.have_volume);
- if (!rctx.have_volume) {
+ if (rctx.have_volume) {
+ Dmsg0(dbglvl, "Call reserve_volume\n");
+ if (reserve_volume(dcr, rctx.VolumeName)) {
+ Dmsg1(dbglvl, "Reserved vol=%s\n", rctx.VolumeName);
+ } else {
+ Dmsg1(dbglvl, "Could not reserve vol=%s\n", rctx.VolumeName);
+ goto bail_out;
+ }
+ } else {
dcr->any_volume = true;
Dmsg0(dbglvl, "no vol, call find_next_appendable_vol.\n");
if (dir_find_next_appendable_volume(dcr)) {
Dmsg1(dbglvl, "looking for Volume=%s\n", rctx.VolumeName);
} else {
Dmsg0(dbglvl, "No next volume found\n");
+ rctx.have_volume = false;
+ rctx.VolumeName[0] = 0;
/*
* If there is at least one volume that is valid and in use,
* but we get here, check if we are running with prefers
* non-used drive and our one and only volume is mounted
* elsewhere, so we bail out and retry using that drive.
*/
- if (dcr->volume_in_use && !rctx.PreferMountedVols) {
+ if (dcr->found_in_use() && !rctx.PreferMountedVols) {
rctx.PreferMountedVols = true;
if (dcr->VolumeName[0]) {
- volume_unused(dcr);
+ dcr->unreserve_device();
}
goto bail_out;
}
/*
* Note. Under some circumstances, the Director can hand us
- * a Volume name that is no the same as the one on the current
+ * a Volume name that is not the same as the one on the current
* drive, and in that case, the call above to find the next
* volume will fail because in attempting to reserve the Volume
* the code will realize that we already have a tape mounted,
*/
if (dcr->dev->num_writers != 0) {
if (dcr->VolumeName[0]) {
- volume_unused(dcr);
+ dcr->unreserve_device();
}
goto bail_out;
}
- rctx.have_volume = false;
- rctx.VolumeName[0] = 0;
}
}
} else {
if (ok) {
rctx.jcr->read_dcr = dcr;
Dmsg5(dbglvl, "Read reserved=%d dev_name=%s mediatype=%s pool=%s ok=%d\n",
- dcr->dev->reserved_device,
+ dcr->dev->num_reserved(),
dcr->dev_name, dcr->media_type, dcr->pool_name, ok);
}
}
bail_out:
rctx.have_volume = false;
rctx.VolumeName[0] = 0;
-// free_dcr(dcr);
Dmsg0(dbglvl, "Not OK.\n");
return 0;
}
if (dev->is_busy()) {
Dmsg4(dbglvl, "Device %s is busy ST_READ=%d num_writers=%d reserved=%d.\n",
dev->print_name(),
- dev->state & ST_READ?1:0, dev->num_writers, dev->reserved_device);
+ dev->state & ST_READ?1:0, dev->num_writers, dev->num_reserved());
Mmsg(jcr->errmsg, _("3602 JobId=%u device %s is busy (already reading/writing).\n"),
jcr->JobId, dev->print_name());
queue_reserve_message(jcr);
dev->clear_append();
dev->set_read();
ok = true;
- dev->reserved_device++;
- Dmsg3(dbglvl, "Inc reserve=%d dev=%s %p\n", dev->reserved_device, dev->print_name(), dev);
- dcr->reserved_device = true;
+ dcr->set_reserved();
bail_out:
dev->dunlock();
goto bail_out;
}
- dev->reserved_device++;
- Dmsg3(dbglvl, "Inc reserve=%d dev=%s %p\n", dev->reserved_device,
- dev->print_name(), dev);
- dcr->reserved_device = true;
+ dcr->set_reserved();
ok = true;
bail_out:
Mmsg(jcr->errmsg, _(
"3608 JobId=%u wants Pool=\"%s\" but have Pool=\"%s\" nreserve=%d on drive %s.\n"),
(uint32_t)jcr->JobId, dcr->pool_name, dev->pool_name,
- dev->reserved_device, dev->print_name());
+ dev->num_reserved(), dev->print_name());
queue_reserve_message(jcr);
Dmsg2(dbglvl, "failed: busy num_writers=0, reserved, pool=%s wanted=%s\n",
dev->pool_name, dcr->pool_name);
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
- Dmsg4(dbglvl, "MaxJobs=%d Jobs=%d reserves=%d Vol=%s\n",
+ Dmsg5(dbglvl, "MaxJobs=%d Jobs=%d reserves=%d Status=%s Vol=%s\n",
dcr->VolCatInfo.VolCatMaxJobs,
- dcr->VolCatInfo.VolCatJobs, dev->reserved_device,
+ dcr->VolCatInfo.VolCatJobs, dev->num_reserved(),
+ dcr->VolCatInfo.VolCatStatus,
dcr->VolumeName);
+ if (strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") == 0) {
+ return true;
+ }
if (dcr->VolCatInfo.VolCatMaxJobs > 0 && dcr->VolCatInfo.VolCatMaxJobs <=
- (dcr->VolCatInfo.VolCatJobs + dev->reserved_device)) {
+ (dcr->VolCatInfo.VolCatJobs + dev->num_reserved())) {
/* Max Job Vols depassed or already reserved */
Mmsg(jcr->errmsg, _("3610 JobId=%u Volume max jobs exceeded on drive %s.\n"),
(uint32_t)jcr->JobId, dev->print_name());
/* If he wants a free drive, but this one is busy, no go */
if (!rctx.PreferMountedVols && dev->is_busy()) {
/* Save least used drive */
- if ((dev->num_writers + dev->reserved_device) < rctx.num_writers) {
- rctx.num_writers = dev->num_writers + dev->reserved_device;
+ if ((dev->num_writers + dev->num_reserved()) < rctx.num_writers) {
+ rctx.num_writers = dev->num_writers + dev->num_reserved();
rctx.low_use_drive = dev;
Dmsg2(dbglvl, "set low use drive=%s num_writers=%d\n",
dev->print_name(), rctx.num_writers);
} else {
- Dmsg1(dbglvl, "not low use num_writers=%d\n", dev->num_writers+dev->reserved_device);
+ Dmsg1(dbglvl, "not low use num_writers=%d\n", dev->num_writers+dev->num_reserved());
}
Dmsg0(dbglvl, "failed: !prefMnt && busy.\n");
Mmsg(jcr->errmsg, _("3605 JobId=%u wants free drive but device %s is busy.\n"),
dev->VolHdr.VolumeName, dev->vol?dev->vol->vol_name:"*none*", rctx.VolumeName);
return 0;
}
- if (is_volume_in_use(dcr)) {
+ if (!dcr->can_i_use_volume()) {
return 0; /* fail if volume on another drive */
}
}
*/
if (dev->num_writers == 0) {
/* Now check if there are any reservations on the drive */
- if (dev->reserved_device) {
+ if (dev->num_reserved()) {
return is_pool_ok(dcr);
} else if (dev->can_append()) {
if (is_pool_ok(dcr)) {
} else {
/* Changing pool, unload old tape if any in drive */
Dmsg0(dbglvl, "OK dev: num_writers=0, not reserved, pool change, unload changer\n");
+ /* ***FIXME*** use set_unload() */
unload_autochanger(dcr, 0);
}
}