General:
+28May08
+kes Add debug code to SD.
+kes Fix renaming a Volume, which used the wrong Volume name.
+26May08
+kes If operator has rewind tape, print warning, release tape and
+ try once more. If tape is positioned somewhere, something went
+ wrong, so mark the tape in error and try once more. Previously
+ this error was fatal, now it produces an error message.
+kes Ensure correct volume name displayed during restore
+kes Ensure that Volume is mounted for restore.
+25May08
+kes Fix a few more Coverity reported problems.
+24May08
+kes Apply Allan Black's status dir job count patch.
+ebl Add information about IMPORT/EXPORT slots in mtx-script.
+kes Enhance a couple of SD debug messages.
+kes Tweak unload flag setting and ensure it is set during swap.
+23May08
+ebl Fix #1091 about bad output in estimate command.
+21May08
+kes Modify autochanger locking to attempt to avoid race
+ conditions.
+kes Make sure device not busy before doing label command.
+kes Display open() errors except when polling. Previously too
+ many were suppressed. This should fix bug #1070.
+kes Fix Win32 reparse points. Bacula will not recurse into any
+ reparse point directory, including mount points, unless the
+ directory is explicitly mentioned at the top level (same as
+ with Unix). A file that is linked to another file will be
+ backed up -- much as Unix does for hardlinked files.
+ This fixes bug #1041.
+20May08
+kes Remove double quotes from ChangeLog and ReleaseNotes
+kes Remove StorageId test when pruning and recycling (Eric's changes).
+kes Remove old form of locking when getting volumes -- causes deadlock.
+kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
+ the name unique and to eliminate compile time error.
+kes Add accurate.o to Win32 FD Makefile
+19May08
+kes Fix cats dll build on Win32 after db_update_job_end_record
+ calling sequence change.
+ebl Switch to tokyo dbm instead of htable in accurate code
+ebl Include tokyo dbm to bacula source tree
+17May08
+kes Fix buffer overruns detected by Coverity.
+13May08
+kes Tweak joblog display.
+12May08
+kes Implement --without-qwt
+kes Fix layout of restore tree dialog
+kes Add configure bat QWT libraries, so that bat can be built
+ with or without the QWT libaries.
+11May08
+ebl Add dummy tape driver for regression tests.
+kes Make sure we unload the right slot when swapping.
+10May08
+kes Add debug times, reduce size of two-pool-changer test
+08May08
+ebl Tweak autoconf scripts for faketape
+07May08
+kes Improve SD reserve debug code.
+kes Testing an improvement to free up volumes no longer in use.
+03May08
+kes Rework SD acquire for read to handle autochanger Volume
+ swapping.
+kes Implement regression that explicitly tests swapping a Volume
+ from one drive to another.
+kes Enhance disk-changer to detect most error conditions.
+kes Fix SD code so that it properly swaps a Volume between drives.
+ This fixes bug #1083.
+02May08
+kes Apply libdbi patch from Joao Freitas for regress and for
+ Bacula trunk. Regress now works with libdbi. Nice.
+kes Apply .nobackup patch from bug #1077 submitted by
+ Edwin Groothuis.
+kes Apply Bastian Friedrich's patch that adds %p to edit the pool
+ name into jobs cloned via the run directive.
+01May08
+kes Prevent a Volume that is being swapped from being freed from
+ the volume list. This will most likely fix, at least partially,
+ bug #1083.
+kes Fix strippath so that it does not get a buffer overrun and crash FD.
+ This fixes bug #1078.
+kes Remove 50 millisec wait in SD that broke debugger.
+ebl Add MaxRunSchedTime option that specifies the maximum allowed time
+ that a job may run, counted from when the job was scheduled.
+ebl Fix MaxWaitTime option that specifies the maximum allowed time that
+ a job may block waiting for a resource, counted from when the job starts
+ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
+kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
+ that implements multiple commands per line in the console when using
+ readline. Modify the default to use a semicolon as the command separator.
+28Apr08
+ebl Fix SQL query in migration code.
+ebl Make accurate mode with hash disk pass regression tests
+27Apr08
+ebl Implement first cut of accurate backup with hash disk.
+19Apr08
+kes Force unload of volume when wrong volume mounted in SD.
+17Apr08
+kes Fix bat seg fault at termination.
+kes Add Bacula generated version to bat about box.
+
+16Apr08
+kes Experiment with allowing multiple read jobs.
+kes Move final volume swapping code to DCR method and
+ call it from acquire_for_read().
+kes When wrong volume is mounted during read, unload_autochanger.
+15Apr08
+kes Integrate the libdbi changes from Joao Henrique Freitas
+14Apr08
+kes Stop searching for Volumes in SD askdir if DIR returns the
+ same volume name twice in a row.
+kes Close bat console windows first to eliminate error message
+ from the notifier.
+13Apr08
+kes Tweak the swap Volume from one drive to another code so that
+ it now seems to work.
+kes Resolve several problems with recycling that broke the new
+ code (these problems are in 2.2.9 as well).
+kes Remove the volume lock when calling the sysop code.
+kes Don't mark a reserved volume with no writers as unused otherwise
+ jobs fail.
+12Apr08
+kes Rework class structures for VOLRES, DCR, and DEVICE to make
+ the method names a bit more logical, and for more logically
+ handling the responsibilities.
+11Apr08
+kes Remove redundant code in terminating the scheduler that just
+ causes a seg fault in many cases.
+kes Cleanup releasing a volume and make it a DCR method.
+kes Improve algorithm for detecting pre-reserved volume and
+ swapping volumes.
+10Apr08
+kes Tweak volume swapping code so it works.
+kes Correct name overloading in mount.c
+kes Replace released flag in VOLRES with reserved and add access
+ methods for the VOLRES class.
+kes Prevent volume from being released while being swapped.
+kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
+ plugin.
+kes Apply Bastial Friedrich's edit pool=%p patch for run clone
+ jobs.
+kes Refactor parts of stored/mount.c
+09Apr08
+ebl Add sanity checks for VolWriteTime and VolReadTime
+ebl Take care of bad clock changes while computing VolWriteTime
+ and VolReadTime. This should fix or limit #1066
+kes Correct error string numbers in dird/catreq.c
+kes Restructure reserving, acquiring, and mounting volumes. Calls to
+ autochanger are deferred for mount.c -- simplifes the code.
+08Apr08
+kes Do not prune any running job. It just fails the job.
+kes Lock the volumes when changing dev->reserved_device and marking
+ the volume unused otherwise the device can get reserved by
+ another job before the volume is released, thus blocking it.
+06Apr08
+kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
+kes Fix bug #1063, reuse of freed ptr in list nextvol.
+kes Release regex compile buffer in filed/job.c
+kes Add proper type of const char in sql_create.c
+kes Turn off debug in daemon termination routines
+kes Move free_volume_list() before devices are freed in stored.c
+kes Fix reference to uninitalized stack variables in bregex.c.
+ This should correct bug #1067.
+04Apr08
+kes Fix possible seg fault in SD when freeing a volume entry.
+03Apr08
+kes Implement unload_dev() before swap device.
+ebl Add statistics prunning with option and menu
+kes Separate unload_dev() from unload_other_device() in autochanger.c
02Apr08
+kes Apply patch from bug #1069 that corrects spurious error messages
+ when ACLs enabled on SGI but no ACL exists.
+ebl Fix small segfault in bacula-sd when debug level is 500
kes Modify run_program() and run_program_full_output() to use
call by reference for the results string. This corrects a long
standing problem where the address of the string may be changed
28Mar08
kes Fix handling of JobMedia records during spooling and when a
Volume is changed without actually writing data to the Volume.
+27Mar08
+kes Rework certain SD locking based on gdb tracebacks of deadlocks
+ sent by Eric. This code now uses only the volume_lock() rather
+ than the reservations lock when at EOM and acquiring a new
+ volume.
+kes Ensure only one exit point in several subroutines.
26Mar08
kes Implement bsock code to permit locking. Use the new code in Verify
in the FD to prevent the heartbeat thread from disrupting the Verify
projects / bacula / bacula / blobdiff