specify here followed by the date and time the job was scheduled for
execution. This directive is required.
-\item [Enabled = \lt{}yes|no\gt{}]
+\item [Enabled = \lt{}yes\vb{}no\gt{}]
\index[dir]{Enable}
\index[dir]{Directive!Enable}
This directive allows you to enable or disable automatic execution
different FileSet.
\item The Job was a Full, Differential, or Incremental backup.
\item The Job terminated normally (i.e. did not fail or was not canceled).
-\item The Job started no longer ago than {\bf Max Full Age}.
+\item The Job started no longer ago than {\bf Max Full Interval}.
\end{itemize}
If all the above conditions do not hold, the Director will upgrade the
different FileSet.
\item The Job was a FULL backup.
\item The Job terminated normally (i.e. did not fail or was not canceled).
-\item The Job started no longer ago than {\bf Max Full Age}.
+\item The Job started no longer ago than {\bf Max Full Interval}.
\end{itemize}
If all the above conditions do not hold, the Director will upgrade the
have been deleted.
\end{description}
-\item [Accurate = \lt{}yes|no\gt{}]
+\item [Accurate = \lt{}yes\vb{}no\gt{}]
\index[dir]{Accurate}
In accurate mode, the File daemon knowns exactly which files were present
after the last backup. So it is able to handle deleted or renamed files.
\addcontentsline{lof}{figure}{Job time control directives}
\includegraphics{\idir different_time.eps}
-\item [Max Full Age = \lt{}time\gt{}]
-\index[dir]{Max Full Age}
-\index[dir]{Directive!Max Full Age}
+\item [Max Full Interval = \lt{}time\gt{}]
+\index[dir]{Max Full Interval}
+\index[dir]{Directive!Max Full Interval}
The time specifies the maximum allowed age (counting from start time) of
the most recent successful Full backup that is required in order to run
Incremental or Differential backup jobs. If the most recent Full backup
considered.
\label{PreferMountedVolumes}
-\item [Prefer Mounted Volumes = \lt{}yes|no\gt{}]
+\item [Prefer Mounted Volumes = \lt{}yes\vb{}no\gt{}]
\index[dir]{Prefer Mounted Volumes}
\index[dir]{Directive!Prefer Mounted Volumes}
If the Prefer Mounted Volumes directive is set to {\bf yes} (default
pools so that Bacula will be forced to mount Volumes from those Pools
on different drives.
-\item [Prune Jobs = \lt{}yes|no\gt{}]
+\item [Prune Jobs = \lt{}yes\vb{}no\gt{}]
\index[dir]{Prune Jobs}
\index[dir]{Directive!Prune Jobs}
Normally, pruning of Jobs from the Catalog is specified on a Client by
default is {\bf no}.
-\item [Prune Files = \lt{}yes|no\gt{}]
+\item [Prune Files = \lt{}yes\vb{}no\gt{}]
\index[dir]{Prune Files}
\index[dir]{Directive!Prune Files}
Normally, pruning of Files from the Catalog is specified on a Client by
yes}, it will override the value specified in the Client resource. The
default is {\bf no}.
-\item [Prune Volumes = \lt{}yes|no\gt{}]
+\item [Prune Volumes = \lt{}yes\vb{}no\gt{}]
\index[dir]{Prune Volumes}
\index[dir]{Directive!Prune Volumes}
Normally, pruning of Volumes from the Catalog is specified on a Client
Note, please see the notes above in {\bf RunScript}
concerning Windows clients.
-\item [Rerun Failed Levels = \lt{}yes|no\gt{}]
+\item [Rerun Failed Levels = \lt{}yes\vb{}no\gt{}]
\index[dir]{Rerun Failed Levels}
\index[dir]{Directive!Rerun Failed Levels}
If this directive is set to {\bf yes} (default no), and Bacula detects that
when checking for failed levels, which means that any FileSet change will
trigger a rerun.
-\item [Spool Data = \lt{}yes|no\gt{}]
+\item [Spool Data = \lt{}yes\vb{}no\gt{}]
\index[dir]{Spool Data}
\index[dir]{Directive!Spool Data}
NOTE: When this directive is set to yes, Spool Attributes is also
automatically set to yes.
-\item [Spool Attributes = \lt{}yes|no\gt{}]
+\item [Spool Attributes = \lt{}yes\vb{}no\gt{}]
\index[dir]{Spool Attributes}
\index[dir]{Directive!Spool Attributes}
\index[dir]{slow}
if the backed up file already exists, Bacula skips restoring this file.
\end{description}
-\item [Prefix Links=\lt{}yes|no\gt{}]
+\item [Prefix Links=\lt{}yes\vb{}no\gt{}]
\index[dir]{Prefix Links}
\index[dir]{Directive!Prefix Links}
If a {\bf Where} path prefix is specified for a recovery job, apply it
documented under \ilink{ Maximum Concurrent Jobs}{DirMaxConJobs} in the
Director's resource.
-\item [Reschedule On Error = \lt{}yes|no\gt{}]
+\item [Reschedule On Error = \lt{}yes\vb{}no\gt{}]
\index[dir]{Reschedule On Error}
\index[dir]{Directive!Reschedule On Error}
If this directive is enabled, and the job terminates in error, the job
correct order, and that your priority scheme will be respected.
\label{AllowMixedPriority}
-\item [Allow Mixed Priority = \lt{}yes|no\gt{}]
+\item [Allow Mixed Priority = \lt{}yes\vb{}no\gt{}]
\index[dir]{Allow Mixed Priority}
This directive is only implemented in version 2.5 and later. When
set to {\bf yes} (default {\bf no}), this job may run even if lower
be run until the priority 5 job has finished.
\label{WritePartAfterJob}
-\item [Write Part After Job = \lt{}yes|no\gt{}]
+\item [Write Part After Job = \lt{}yes\vb{}no\gt{}]
\index[dir]{Write Part After Job}
\index[dir]{Directive!Write Part After Job}
This directive is only implemented in version 1.37 and later.
specifies to use the Pool named {\bf Incremental} if the job is an
incremental backup.
-\item [SpoolData=yes|no]
+\item [SpoolData=yes\vb{}no]
\index[dir]{SpoolData}
\index[dir]{Directive!SpoolData}
tells Bacula to request the Storage daemon to spool data to a disk file
This directive is available only in Bacula version 2.3.5 or
later.
-\item [WritePartAfterJob=yes|no]
+\item [WritePartAfterJob=yes\vb{}no]
\index[dir]{WritePartAfterJob}
\index[dir]{Directive!WritePartAfterJob}
tells Bacula to request the Storage daemon to write the current part
The default is 180 days.
\label{AutoPrune}
-\item [AutoPrune = \lt{}yes|no\gt{}]
+\item [AutoPrune = \lt{}yes\vb{}no\gt{}]
\index[dir]{AutoPrune}
\index[dir]{Directive!AutoPrune}
If AutoPrune is set to {\bf yes} (default), Bacula (version 1.20 or greater)
check so that you don't try to write data for a DLT onto an 8mm device.
\label{Autochanger1}
-\item [Autochanger = \lt{}yes|no\gt{}]
+\item [Autochanger = \lt{}yes\vb{}no\gt{}]
\index[dir]{Autochanger}
\index[dir]{Directive!Autochanger}
If you specify {\bf yes} for this command (the default is {\bf no}),
the Job resource or in the Pool, but it must be specified in
one or the other. If not configuration error will result.
-\item [Use Volume Once = \lt{}yes|no\gt{}]
+\item [Use Volume Once = \lt{}yes\vb{}no\gt{}]
\index[dir]{Use Volume Once}
\index[dir]{Directive!Use Volume Once}
This directive if set to {\bf yes} specifies that each volume is to be
must use the
\ilink{\bf update volume}{UpdateCommand} command in the Console.
-\item [Catalog Files = \lt{}yes|no\gt{}]
+\item [Catalog Files = \lt{}yes\vb{}no\gt{}]
\index[dir]{Catalog Files}
\index[dir]{Directive!Catalog Files}
This directive defines whether or not you want the names of the files
restore} command nor any other command that references File entries.
\label{PoolAutoPrune}
-\item [AutoPrune = \lt{}yes|no\gt{}]
+\item [AutoPrune = \lt{}yes\vb{}no\gt{}]
\index[dir]{AutoPrune}
\index[dir]{Directive!AutoPrune}
If AutoPrune is set to {\bf yes} (default), Bacula (version 1.20 or
\label{PoolRecycle}
-\item [Recycle = \lt{}yes|no\gt{}]
+\item [Recycle = \lt{}yes\vb{}no\gt{}]
\index[dir]{Recycle}
\index[dir]{Directive!Recycle}
This directive specifies whether or not Purged Volumes may be recycled.
\label{RecycleOldest}
-\item [Recycle Oldest Volume = \lt{}yes|no\gt{}]
+\item [Recycle Oldest Volume = \lt{}yes\vb{}no\gt{}]
\index[dir]{Recycle Oldest Volume}
\index[dir]{Directive!Recycle Oldest Volume}
This directive instructs the Director to search for the oldest used
\label{RecycleCurrent}
-\item [Recycle Current Volume = \lt{}yes|no\gt{}]
+\item [Recycle Current Volume = \lt{}yes\vb{}no\gt{}]
\index[dir]{Recycle Current Volume}
\index[dir]{Directive!Recycle Current Volume}
If Bacula needs a new Volume, this directive instructs Bacula to Prune
\label{PurgeOldest}
-\item [Purge Oldest Volume = \lt{}yes|no\gt{}]
+\item [Purge Oldest Volume = \lt{}yes\vb{}no\gt{}]
\index[dir]{Purge Oldest Volume}
\index[dir]{Directive!Purge Oldest Volume}
This directive instructs the Director to search for the oldest used
by MySQL and PostgreSQL and is ignored by SQLite if provided. This
directive is optional.
-%% \item [Multiple Connections = \lt{}yes|no\gt{}]
+%% \item [Multiple Connections = \lt{}yes\vb{}no\gt{}]
%% \index[dir]{Multiple Connections}
%% \index[dir]{Directive!Multiple Connections}
%% By default, this directive is set to no. In that case, each job that uses