\section{LZO Compression}
-LZO compression was added in the Unix File Daemon. From the user point of view,
+LZO compression has been to the File daemon. From the user's point of view,
it works like the GZIP compression (just replace {\bf compression=GZIP} with
{\bf compression=LZO}).
}
\end{verbatim}
-LZO provides much faster compression and decompression speed but lower
+LZO provides a much faster compression and decompression speed but lower
compression ratio than GZIP. It is a good option when you backup to disk. For
-tape, the built-in compression may be a better option.
+tape, the hardware compression is almost always a better option.
-LZO is a good altenative for GZIP1 when you don't want to slow down your
-backup. On a modern CPU it should be able to run almost as fast as:
+LZO is a good alternative for GZIP1 when you don't want to slow down your
+backup. With a modern CPU it should be able to run almost as fast as:
\begin{itemize}
\item your client can read data from disk. Unless you have very fast disks like
a 1Gb/s link.
\end{itemize}
-Note that bacula only use one compression level LZO1X-1.
+Note, Bacula uses compression level LZO1X-1.
\medskip
The code for this feature was contributed by Laurent Papier.
\medskip
-This project was submited by Dunlap Blake; testing and documentation was funded
+This project was submitted by Dunlap Blake; testing and documentation was funded
by Bacula Systems.
\section{Changes in Bvfs (Bacula Virtual FileSystem)}
\caption{Bat Brestore Panel}
\end{figure}
-\texttt{Important}, the Bvfs module does not yet work correctly with BaseJobs,
-Copy and Migration jobs.
+the Bvfs module works correctly with BaseJobs, Copy and Migration jobs.
\medskip
This project was funded by Bacula Systems.
can contribute new faster SQL queries we will be happy, else don't complain
about speed.
\item The cache creation is dependent of the number of directories. As Bvfs
- shares information accross jobs, the first creation can be slow
+ shares information across jobs, the first creation can be slow
\item All fields are separated by a tab
-\item Due to potential encoding problem, it's advised to allways use pathid in
+\item Due to potential encoding problem, it's advised to always use pathid in
queries.
\end{itemize}
To include a directory (with \texttt{dirid}), Bvfs needs to run a query to
select all files. This query could be time consuming.
-\texttt{hardlink} list is always composed of a serie of two numbers (jobid,
+\texttt{hardlink} list is always composed of a series of two numbers (jobid,
fileindex). This information can be found in the LinkFI field of the LStat
packet.
.bvfs_cleanup path=b20001
\end{verbatim}
+\subsection*{Clearing the BVFS Cache}
+
+To clear the BVFS cache, you can use the \texttt{.bvfs\_clear\_cache} command.
+
+\begin{verbatim}
+.bvfs_clear_cache yes
+OK
+\end{verbatim}
+
\section{Changes in the Pruning Algorithm}
We rewrote the job pruning algorithm in this version. Previously, in some users
or files matched by the rather simple fnmatch mechanism.
See below for information on doing wild-card and regex excludes.
+\item [NewPreInclude] can be called to create a new Include block. This
+ block will be added after the current defined Include block. This
+ function can be called multiple times, but each time, it will create
+ a new Include section (not normally needed). This function should
+ be called only if you want to add an entirely new Include block.
+
\item [NewInclude] can be called to create a new Include block. This
block will be added before any user defined Include blocks. This
function can be called multiple times, but each time, it will create
\end{description}
\item [AddRegex] adds a regex expression to the current Options block.
- The fillowing options are permitted:
+ The following options are permitted:
\begin{description}
\item [ ] (a blank) regex applies to whole path and filename.
\item [F] regex applies only to the filename (directory or path stripped).
\end{description}
\item [AddWild] adds a wildcard expression to the current Options block.
- The fillowing options are permitted:
+ The following options are permitted:
\begin{description}
\item [ ] (a blank) regex applies to whole path and filename.
\item [F] regex applies only to the filename (directory or path stripped).
\begin{description}
\item [bEventCancelCommand] is called whenever the currently
- running Job is cancelled */
+ running Job is canceled */
\item [bEventVssBackupAddComponents]
\item Fix for acl storage on OSX
\item Cleanup of configure checks for ACL detection, now configure only
tests for a certain interface type based on the operating system
- this should give less false possitives on detection. Also when acls
+ this should give less false positives on detection. Also when ACLs
are detected no other acl checks are performed anymore.
\end{itemize}
debug.
\item Cleanup of configure checks for XATTR detection, now configure only
tests for a certain interface type based on the operating system
- this should give less false possitives on detection. Also when xattrs
+ this should give less false positives on detection. Also when xattrs
are detected no other xattr checks are performed anymore.
\end{itemize}
All current database backend drivers for catalog information are rewritten
to use a set of multi inherited C++ classes which abstract the specific
database specific internals and make sure we have a more stable generic
-interface with the rest of sql code. From now on there is a strict
-boundery between the SQL code and the low-level database functions. This
+interface with the rest of SQL code. From now on there is a strict
+boundary between the SQL code and the low-level database functions. This
new interface should also make it easier to add a new backend for a
currently unsupported database. As part of the rewrite the SQLite 2 code
was removed (e.g. only SQLite 3 is now supported). An extra bonus of the
\chapter{Release Version 5.0.3}
There are no new features in version 5.0.2. This version simply fixes a
-number of bugs found in version 5.0.1 during the onging development
+number of bugs found in version 5.0.1 during the ongoing development
process.
\chapter{Release Version 5.0.2}
There are no new features in version 5.0.2. This version simply fixes a
-number of bugs found in version 5.0.1 during the onging development
+number of bugs found in version 5.0.1 during the ongoing development
process.
%%
This chapter presents the new features that are in the released Bacula version
5.0.1. This version mainly fixes a number of bugs found in version 5.0.0 during
-the onging development process.
+the ongoing development process.
\section{Truncate Volume after Purge}
\label{sec:actiononpurge}
\section{Allow Higher Duplicates}
This directive did not work correctly and has been depreciated
(disabled) in version 5.0.1. Please remove it from your bacula-dir.conf
-file as it will be removed in a future rlease.
+file as it will be removed in a future release.
\section{Cancel Lower Level Duplicates}
This directive was added in Bacula version 5.0.1. It compares the
It seems obvious to us, but apparently not to some users, that given the
definition above that the Pool File and Job Retention periods is a global
-override for the normal Client based prunning, which means that when the
-Job is prunned, the prunning will apply globally to that particular Job.
+override for the normal Client based pruning, which means that when the
+Job is pruned, the pruning will apply globally to that particular Job.
Currently, there is a bug in the implementation that causes any Pool
retention periods specified to apply to {\bf all} Pools for that
When using compression, the random test will give your the minimum throughput
of your drive . The test using constant string will give you the maximum speed
-of your hardware chain. (cpu, memory, scsi card, cable, drive, tape).
+of your hardware chain. (CPU, memory, SCSI card, cable, drive, tape).
You can change the block size in the Storage Daemon configuration file.
We have ported {\bf bat} to Windows and it is now installed
by default when the installer is run. It works quite well
on Win32, but has not had a lot of testing there, so your
-feedback would be welcome. Unfortunately, eventhough it is
+feedback would be welcome. Unfortunately, even though it is
installed by default, it does not yet work on 64 bit Windows
operating systems.
\item The \texttt{Device Poll Interval} is now 5 minutes. (previously did not
poll by default).
\item Virtually all the features of {\bf mtx-changer} have
- now been parameterized, which allows you to configure
+ now been parametrized, which allows you to configure
mtx-changer without changing it. There is a new configuration file {\bf mtx-changer.conf}
that contains variables that you can set to configure mtx-changer.
This configuration file will not be overwritten during upgrades.
We encourage you to submit any changes
- that are made to mtx-changer and to parameterize it all in
+ that are made to mtx-changer and to parametrize it all in
mtx-changer.conf so that all configuration will be done by
changing only mtx-changer.conf.
\item The new \texttt{mtx-changer} script has two new options, \texttt{listall}
\chapter{Released Version 3.0.3 and 3.0.3a}
There are no new features in version 3.0.3. This version simply fixes a
-number of bugs found in version 3.0.2 during the onging development
+number of bugs found in version 3.0.2 during the ongoing development
process.
\chapter{New Features in Released Version 3.0.2}
\index[general]{Accurate Backup}
As with most other backup programs, by default Bacula decides what files to
-backup for Incremental and Differental backup by comparing the change
+backup for Incremental and Differential backup by comparing the change
(st\_ctime) and modification (st\_mtime) times of the file to the time the last
backup completed. If one of those two times is later than the last backup
time, then the file will be backed up. This does not, however, permit tracking
allow certain platform specific ACL streams to be decoded and restored on the
same platform that they were created on. The old code allowed to restore ACL
cross platform but the comments already mention that not being to wise. For
-backward compatability the new code will accept the two old ACL streams and
+backward compatibility the new code will accept the two old ACL streams and
handle those with the platform specific handler. But for all new backups it
will save the ACLs using the new streams.
\end{itemize}
In future versions we might support conversion functions from one type of acl
-into an other for types that are either the same or easily convertable. For now
-the streams are seperate and restoring them on a platform that doesn't
+into an other for types that are either the same or easily convertible. For now
+the streams are separate and restoring them on a platform that doesn't
recognize them will give you a warning.
\section{Extended Attributes}
Something that was on the project list for some time is now implemented for
platforms that support a similar kind of interface. Its the support for backup
and restore of so called extended attributes. As extended attributes are so
-platform specific these attributes are saved in seperate streams for each
+platform specific these attributes are saved in separate streams for each
platform. Restores of the extended attributes can only be performed on the
same platform the backup was done. There is support for all types of extended
attributes, but restoring from one type of filesystem onto an other type of
-filesystem on the same platform may lead to supprises. As extended attributes
+filesystem on the same platform may lead to surprises. As extended attributes
can contain any type of data they are stored as a series of so called
value-pairs. This data must be seen as mostly binary and is stored as such.
As security labels from selinux are also extended attributes this option also
\item {\bf NetBSD}
\end{itemize}
-On linux acls are also extended attributes, as such when you enable ACLs on a
+On Linux acls are also extended attributes, as such when you enable ACLs on a
Linux platform it will NOT save the same data twice e.g. it will save the ACLs
-and not the same exteneded attribute.
+and not the same extended attribute.
To enable the backup of extended attributes please add the following to your
fileset definition.
If {\bf Allow Duplicate Jobs} is set to {\bf no} and two jobs
are present and none of the three directives given below permit
- cancelling a job, then the current job (the second one started)
- will be cancelled.
+ Canceling a job, then the current job (the second one started)
+ will be canceled.
\subsection{Allow Higher Duplicates = \lt{}yes\vb{}no\gt{}}
\index[general]{Allow Higher Duplicates}
\subsection{Plugin Options}
\index[general]{Plugin Options}
The {\bf Plugin Options} directive takes a quoted string
-arguement (after the equal sign) and may be specified in the
+argument (after the equal sign) and may be specified in the
Job resource. The options specified will be passed to all plugins
when they are run. This each plugin must know what it is looking
for. The value defined in the Job resource can be modified
done, and may also truncate log files incorrectly. It is important,
therefore, that the Exchange database files be excluded from the backup,
although the folders the files are in should be included, or they will
-have to be recreated manually if a baremetal restore is done.
+have to be recreated manually if a bare metal restore is done.
\begin{verbatim}
FileSet {
\subsection{Restoring on Microsoft Server 2007}
Apparently the {\bf Exmerge} program no longer exists in Microsoft Server
-2007, and henc you use a new proceedure for recovering a single mail box.
-This procedure is ducomented by Microsoft at:
+2007, and hence you use a new procedure for recovering a single mail box.
+This procedure is documented by Microsoft at:
\elink{http://technet.microsoft.com/en-us/library/aa997694.aspx}{http://technet.microsoft.com/en-us/library/aa997694.aspx},
and involves using the {\bf Restore-Mailbox} and {\bf
-Get-MailboxStatistics} shell commands.
+Get-Mailbox Statistics} shell commands.
\subsection{Caveats}
This plugin is still being developed, so you should consider it
projects / bacula / docs / blobdiff