Move CONFIG_PHY_ADDR to Kconfig

[u-boot] / drivers / net / phy / Kconfig

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index e562a8ac1a77852c4cf7094c6e17e1966bd55bc0..25de3fb2266586bd2b234f81dda702fd68e95a2d 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -7,14 +7,52 @@ config MV88E6352_SWITCH
 
 menuconfig PHYLIB
        bool "Ethernet PHY (physical media interface) support"
+       depends on NET
        help
          Enable Ethernet PHY (physical media interface) support.
 
 if PHYLIB
 
+config PHY_ADDR
+       int "PHY address"
+       default 1 if ARCH_SUNXI
+       default 0
+       help
+         The address of PHY on MII bus. Usually in range of 0 to 31.
+
+config B53_SWITCH
+       bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
+       help
+         Enable support for Broadcom BCM53xx (RoboSwitch) Ethernet switches.
+         This currently supports BCM53125 and similar models.
+
+if B53_SWITCH
+
+config B53_CPU_PORT
+       int "CPU port"
+       default 8
+
+config B53_PHY_PORTS
+       hex "Bitmask of PHY ports"
+
+endif # B53_SWITCH
+
 config MV88E61XX_SWITCH
        bool "Marvel MV88E61xx Ethernet switch PHY support."
 
+if MV88E61XX_SWITCH
+
+config MV88E61XX_CPU_PORT
+       int "CPU Port"
+
+config MV88E61XX_PHY_PORTS
+       hex "Bitmask of PHY Ports"
+
+config MV88E61XX_FIXED_PORTS
+       hex "Bitmask of PHYless serdes Ports"
+
+endif # MV88E61XX_SWITCH
+
 config PHYLIB_10G
        bool "Generic 10G PHY support"
 
@@ -42,8 +80,55 @@ config PHY_LXT
 config PHY_MARVELL
        bool "Marvell Ethernet PHYs support"
 
+config PHY_MESON_GXL
+       bool "Amlogic Meson GXL Internal PHY support"
+
 config PHY_MICREL
        bool "Micrel Ethernet PHYs support"
+       help
+         Enable support for the GbE PHYs manufactured by Micrel (now
+         a part of Microchip). This includes drivers for the KSZ804,
+         KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, KSZ8721
+         either/or KSZ9021 (see the "Micrel KSZ9021 family support"
+         config option for details), and KSZ9031 (if configured).
+
+if PHY_MICREL
+
+config PHY_MICREL_KSZ9021
+       bool
+       select PHY_GIGE
+       select PHY_MICREL_KSZ90X1
+
+config PHY_MICREL_KSZ9031
+       bool
+       select PHY_GIGE
+       select PHY_MICREL_KSZ90X1
+
+config PHY_MICREL_KSZ90X1
+       bool "Micrel KSZ90x1 family support"
+       select PHY_GIGE
+       help
+         Enable support for the Micrel KSZ9021 and KSZ9031 GbE PHYs. If
+         enabled, the extended register read/write for KSZ90x1 PHYs
+         is supported through the 'mdio' command and any RGMII signal
+         delays configured in the device tree will be applied to the
+         PHY during initialization.
+
+         This should not be enabled at the same time with PHY_MICREL_KSZ8XXX
+         as the KSZ9021 and KS8721 share the same ID.
+
+config PHY_MICREL_KSZ8XXX
+       bool "Micrel KSZ8xxx family support"
+       default y if !PHY_MICREL_KSZ90X1
+       help
+         Enable support for the 8000 series GbE PHYs manufactured by Micrel
+         (now a part of Microchip). This includes drivers for the KSZ804,
+         KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, and KSZ8721.
+
+         This should not be enabled at the same time with PHY_MICREL_KSZ90X1
+         as the KSZ9021 and KS8721 share the same ID.
+
+endif # PHY_MICREL
 
 config PHY_MSCC
        bool "Microsemi Corp Ethernet PHYs support"