This is Bacula's regression script directory.
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+Warning!!!! Make sure not to run it on the same system
+with your production Catalog because the tables will all
+be cleared. You can run it on the your production system
+if you use a different database. E.g. if your production
+system uses MySQL, you can use SQLite here.
+!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+
To set it up, create your personal configuration file, by
copying prototype.conf to xxx.conf or simply editing prototype.conf
directly.
a real example, look at kern.conf, but please don't use my
email address!
-Make sure that depkgs is pre-built if it isn't
-already: (cd your-depkgs; make sqlite).
+If you are using SQLite, make sure that depkgs is pre-built if it
+isn't already: (cd your-depkgs; make sqlite).
+
+Note, if you use any database other than SQLite, be sure it is not
+your production database because Bacula will delete all the tables
+and recreate them. With SQLite, a new different database is created,
+so it will not affect your production system.
+
Using the .conf file, you can now select between any Catalog type:
SQLite, SQLite3, MySQL, or PostgreSQL. Be aware, however, if you
use an installed database on a production server, running these
test. Aside from the required "make setup", each test is totally
self-initalizing and should clean up after itself.
-Not all the tests yet report OK. This is simply because there are
-some spurious differences that I haven't yet taken the time to
-eliminate. The working scrips as of 24 Apr 03 are (this is
-way out of date!):
-
-backup-bacula-test
-sparse-test
-compressed-test
-sparse-compressed-test
-two-jobs-test
-wierd-files-test
-verify-vol-test
-
-The tests expect you to execute them from the main regress
+All the tests expect you to execute them from the main regress
directory!
You can run all the disk based tests by doing:
./do_file
+The disk based tests are totally separate from any production
+system, provided you have configured the database appropriately
+as noted above.
+
You can run all the disk and most of the tape tests by doing:
./do_all
+======== Important !!! ============
+When running the tape tests, Bacula will write on any tape that
+is in the tape drive that you have configured. If it is a production
+Bacula tape, it will be destroyed. If you have configured an Autochanger,
+Bacula will write on the tapes in slots 1 and 2 thus destroying any
+information on those tapes, even if they are Bacula production tapes.
+===================================
+
Each of the above calls one or more scripts. By looking at the
scripts available in this directory, you can see that there are a number
of options for running tests.
make sed
Debugging failed tests:
-The simplest thing to do is to edit tests/xxxx where xxxx is the name of
-the test, and change the line "debug=0" to "debug=1". If the test has
-not been updated to have the debug variable, please notify Kern, and I
-will be happy to fix it -- I am upgrading them one at a time.
+Prior versions required editing the tests/xxxx and changing a debug flag.
+However, that has been replaced by two environment variables:
+
+ REGRESS_DEBUG
+ REGRESS_WAIT
+
+If you define REGRESS_DEBUG, e.g.
+
+ REGRESS_DEBUG=1
+ export REGRESS_DEBUG
+
+then run a test, it will display the job and debug output.
+
+If you define REGRESS_WAIT, the script will stop and request:
+
+Start Bacula under debugger and enter anything when ready ...
+
+At this point, you can start any of the daemons under the debugger,
+then answer the message by entering any character. The script will
+then continue. For any daemon or daemons that you have manually started,
+you will see an error message when the script attempts to run a second
+copy, but those messages can be ignored. This makes it reasonably easy
+to run any component or components under the debugger if necessary.
+
+Explicit example:
+
+In shell window 1.
+
+cd regress
+export REGRESS_DEBUG=1
+export REGRESS_WAIT=1
+tests/name-of-script-test
+(wait until it tells you to start the debugger)
+
+In shell window 2
+
+cd regress/bin
+gdb bacula-xx (where xx is the component you want to debug).
+(possibly set a break point -- normally not)
+run -s -f
+(wait for the output to stop)
+
+In shell window 1
+(enter any character or simply a return)
+(ignore the error message it prints complaining that the daemon
+you are debugging is already running, which is in fact the case).
+
+
+That is all there is to it. The debugger window will get some
+output and will stop waiting for input if anything goes wrong
+like a seg fault. At that point, you can enter commands.
+
+The procedure avoids modifying the test scripts and trying to
+find pids and the such. If you want less debug output when
+debugging, don't set REGRESS_DEBUG=1.
+
+===
+
+Also, if you run from time to time on a computer that is not connected
+to the network, please be sure that "hostname" is set to "localhost",
+otherwise, your tests may fail because the hostname used by Bacula's
+./configure cannot be properly resolved.
+
+Anyway, you can debug where it is happening in the source code using the
+following example. For example, here I get the following backtrace:
+
+======= Backtrace: =========
+/lib/libc.so.6[0xb7b9d6e1]
+/lib/libc.so.6(cfree+0x89)[0xb7b9ed79]
+/home/kern/bacula/regress/bin/bacula-fd[0x8082ae5]
+/home/kern/bacula/regress/bin/bacula-fd[0x8082d58]
+/home/kern/bacula/regress/bin/bacula-fd[0x80838ac]
+/home/kern/bacula/regress/bin/bacula-fd[0x807aa3f]
+/home/kern/bacula/regress/bin/bacula-fd[0x807ac29]
+/home/kern/bacula/regress/bin/bacula-fd[0x804d188]
+/lib/libc.so.6(__libc_start_main+0xdc)[0xb7b4ef9c]
+/home/kern/bacula/regress/bin/bacula-fd[0x804cd21]
+
+Now to convert this into something more meaningful, kill off any hung Bacula
+processes. Note the one that was running -- above you see that it was
+bacula-fd, then bring the same binary up in the debugger. Then start at the
+first bacula-fd line, and feed the hex number to gdb as follows:
+
+info symbol 0x8082ae5
+free_addresses(dlist*) + 53 in section .text
+
+info symbol 0x8082d58
+add_address(dlist**, IPADDR::i_type, unsigned short, int, char const*, char
+const*, char**) + 568 in section .text
projects / bacula / bacula / blobdiff