QueryFile = "@scriptdir@/query.sql"
WorkingDirectory = "@working_dir@"
PidDirectory = "@piddir@"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
Password = "pNvX1WiXnwv2C/F7E52LGvw6rKjbbPvu2kyuPa9pVaL3"
Messages = Daemon
FD Connect Timeout = 2min
Job {
Name = "NightlySave"
Type = Backup
- Client=@hostname@-fd
+ Client = @hostname@-fd
FileSet="Full Set"
- Storage = DDS-4
+ Storage = tape
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
+ Max Run Time = 30min
}
-#
-# Note, this client does not exist so the job will
-# fail
-#
+
Job {
- Name = "Offline"
+ Name = "NightlySave1"
Type = Backup
- Client=@hostname@-fd1
+ Client = @hostname@-fd
FileSet="Full Set"
- Storage = DDS-4
+ Storage = tape
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
+ Client Run Before Job = "sleep 5"
+ Max Run Time = 30min
}
-
Job {
- Name = "NightlySave1"
+ Name = "NightlySave2"
Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
+ Client = @hostname@-fd
+ FileSet = "Full Set"
+ Storage = tape
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
- Client Run Before Job = "/bin/sleep 10"
+ Max Run Time = 30min
}
+# Backs up to tape2 which is a remote SD on
+# another machine
Job {
- Name = "NightlySave2"
+ Name = "NightlySave3"
Type = Backup
- Client=@hostname@-fd
- FileSet="Full Set"
- Storage = DDS-4
+ Client = @hostname@-fd
+ FileSet = "Full Set"
+ Storage = tape2
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
+ Max Run Time = 30min
}
Job {
Level = VolumeToCatalog
Client=@hostname@-fd
FileSet="Verify Set"
- Storage = DDS-4
+ Storage = tape
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
+ Max Run Time = 30min
}
Job {
Messages = Standard
Pool = Default
Write Bootstrap = "@working_dir@/NightlySave.bsr"
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
SpoolData = yes
# Prefer Mounted Volumes = no
+ Max Run Time = 30min
}
Type = Restore
Client=@hostname@-fd
FileSet="Full Set"
- Storage = DDS-4
+ Storage = tape
Messages = Standard
Pool = Default
Where = @tmpdir@/bacula-restores
+ Max Run Time = 30min
}
File Retention = 30d # 30 days
Job Retention = 180d # six months
AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
}
-Client {
- Name = @hostname@-fd1
- Address = @hostname@
- FDPort = 1@fdport@ # nothing should be on this port!!!!!
- Catalog = MyCatalog
- Password = "xevrjURYoCHhn26RaJoWbeWXEY/a3VqGKp/37tgWiuHc" # password for FileDaemon
- File Retention = 30d # 30 days
- Job Retention = 180d # six months
- AutoPrune = yes # Prune expired Jobs/Files
- Maximum Concurrent Jobs = 4
+# Definition of File storage device
+Storage {
+ Name = File
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = FileStorage # must be same as Device in Storage daemon
+ Media Type = FileMedia # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
}
-
-# Definition of DDS tape storage device
+# Definition of File2 storage device
Storage {
- Name = DDS-4
+ Name = File2
Address = @hostname@ # N.B. Use a fully qualified name here
SDPort = @sdport@
Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
- Device = DDS-4 # must be same as Device in Storage daemon
- Media Type = DDS-4 # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
-# Autochanger = yes
+ Device = FileStorage # must be same as Device in Storage daemon
+ Media Type = FileMedia2 # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
}
+# Definition of File3 storage device
+Storage {
+ Name = File3
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = FileStorage # must be same as Device in Storage daemon
+ Media Type = FileMedia3 # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+}
-# Definition of File storage device
+# Definition of File4 storage device
Storage {
- Name = File
+ Name = File4
Address = @hostname@ # N.B. Use a fully qualified name here
SDPort = @sdport@
Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
Device = FileStorage # must be same as Device in Storage daemon
- Media Type = FileMedia # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
+ Media Type = FileMedia4 # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
}
+# Definition of DDS tape storage device
+Storage {
+ Name = tape
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = tape # must be same as Device in Storage daemon
+ Media Type = tape # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+# Autochanger = yes
+}
+
+# Definition tape storage device that is on a
+# remote machine
+Storage {
+ Name = tape2
+ Address = @hostname@ # For same machine shstore simulation
+# Address = @remotehostaddr@ # For real two machine setup
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = tape2 # must be same as Device in Storage daemon
+ Media Type = tape # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+# Autochanger = yes
+}
+
+
# Definition of Virtual storage device
Storage {
Name = Virtual
Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
Device = Virtual # must be same as Device in Storage daemon
Media Type = Disk # must be same as MediaType in Storage daemon
- Maximum Concurrent Jobs = 4
+ Maximum Concurrent Jobs = 100
+ Autochanger = yes
+}
+
+Storage {
+ Name = vDrive-1
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = vDrive-1 # must be same as Device in Storage daemon
+ Media Type = Disk # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+ Autochanger = Virtual
+}
+
+Storage {
+ Name = vDrive-2
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = vDrive-2 # must be same as Device in Storage daemon
+ Media Type = Disk # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+ Autochanger = Virtual
}
+Storage {
+ Name = vDrive-3
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = vDrive-3 # must be same as Device in Storage daemon
+ Media Type = Disk # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+ Autochanger = Virtual
+}
+# Definition of Virtual storage device
+Storage {
+ Name = VirtualRestore
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = VirtualRestore # must be same as Device in Storage daemon
+ Media Type = Disk # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+ Autochanger = yes
+}
+
+# Definition of Virtual storage device
+Storage {
+ Name = Virtual2
+ Address = @hostname@ # N.B. Use a fully qualified name here
+ SDPort = @sdport@
+ Password = "ccV3lVTsQRsdIUGyab0N4sMDavui2hOBkmpBU0aQKOr9" # password for Storage daemon
+ Device = Virtual2 # must be same as Device in Storage daemon
+ Media Type = Disk2 # must be same as MediaType in Storage daemon
+ Maximum Concurrent Jobs = 100
+ Autochanger = yes
+}
# Generic catalog service
Catalog {
Name = MyCatalog
@libdbi@
- dbname = regress; user = regress; password = ""
+ dbname = @db_name@; user = @db_user@; password = "@db_password@"
}
# Reasonable message delivery -- send most everything to email address
# also keep all your messages if the scroll off the console.
#
append = "@working_dir@/log" = all, !skipped
+ catalog = all, !skipped
}
#
# mail = @job_email@ = all, !skipped
console = all, !skipped, !saved
append = "@working_dir@/log" = all, !skipped
+ catalog = all, !skipped
}
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365d # one year
+ RecyclePool=Scratch # test forward reference
}
Pool {
Volume Retention = 365d # one year
Recycle Pool = Scratch # recycle back here
}
+
+Pool {
+ Name = PoolA-MCJ1
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ ActionOnPurge = Truncate
+ Volume Retention = 3d
+ Maximum Volume Bytes = 20M
+ Maximum Volume Jobs = 1
+ LabelFormat = "PoolA-MCJ1"
+}
+
+Pool {
+ Name = PoolB-MCJ1
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ ActionOnPurge = Truncate
+ Volume Retention = 3d
+ Maximum Volume Bytes = 20M
+ Maximum Volume Jobs = 1
+ LabelFormat = "PoolB-MCJ1"
+}
+
+Pool {
+ Name = PoolC-MCJ1
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ ActionOnPurge = Truncate
+ Volume Retention = 3d
+ Maximum Volume Bytes = 20M
+ Maximum Volume Jobs = 1
+ LabelFormat = "PoolC-MCJ1"
+}
+
+Pool {
+ Name = PoolD-MCJ1
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ ActionOnPurge = Truncate
+ Volume Retention = 3d
+ Maximum Volume Bytes = 20M
+ Maximum Volume Jobs = 1
+ LabelFormat = "PoolD-MCJ1"
+}
+
+Pool {
+ Name = PoolE-MCJ1
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ ActionOnPurge = Truncate
+ Volume Retention = 3d
+ Maximum Volume Bytes = 20M
+ Maximum Volume Jobs = 1
+ LabelFormat = "PoolE-MCJ1"
+}
+
+Pool {
+ Name = Special
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ Volume Retention = 365d # one year
+ ScratchPool = SpecialScratch
+ Maximum Volume Jobs = 1
+}
+
+Pool {
+ Name = SpecialScratch
+ Pool Type = Backup
+ Recycle = yes # Bacula can automatically recycle Volumes
+ AutoPrune = yes # Prune expired volumes
+ Volume Retention = 365d # one year
+ Recycle Pool = SpecialScratch # recycle back here
+}
projects / bacula / bacula / blobdiff