#
+check_encoding()
+{
+ ${bin}/bacula-dir -d50 -t -c ${conf}/bacula-dir.conf 2>&1 | grep 'Wanted SQL_ASCII, got UTF8' >/dev/null
+ if [ $? = 0 ]; then
+ echo "Found database encoding problem, please modify the database encoding (SQL_ASCII)"
+ exit 1
+ fi
+}
+
start_test()
{
+ check_encoding
# Turn off email
- outf="tmp/sed_tmp"
+ outf="${tmp}/sed_tmp"
echo "s% mail =%# mail = %g" >${outf}
echo "s% operator =%# operator =%g" >>${outf}
- cp bin/bacula-dir.conf tmp/1
- sed -f ${outf} tmp/1 >bin/bacula-dir.conf
+ cp ${conf}/bacula-dir.conf ${tmp}/1
+ sed -f ${outf} ${tmp}/1 > ${conf}/bacula-dir.conf
echo " "
echo " "
echo " === Starting $TestName at `date +%R:%S` ==="
- echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
+ echo " === Starting $TestName at `date +%R:%S` ===" >> ${working}/log
echo " "
+ export TestName
export zstat
+ export estat
+ estat=0
+ zstat=0
+ bstat=0
+ rstat=0
+ dstat=0
}
require_root()
print_debug()
{
+ echo $* | grep ERROR > /dev/null
+ if test $? -eq 0; then
+ echo $* >> $tmp/err.log
+ fi
if test "$debug" -eq 1 ; then
echo $*
fi
fi
}
-check_duration()
+################################################################
+# Get information from logs
+get_mig_info()
{
- LOG=$1
- TIME=$2
- T=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
+ # Prev Backup JobId
+ JOBID=$1
+ LOG=$2
+ RET=`awk -F: "BEGIN { jobid=$JOBID } "'/Prev Backup JobId/ { cjid=$2 } /New Backup JobId/ { if (cjid == jobid) { print $2 } }' $LOG`
+}
- if [ "$T" -gt $TIME ]; then
- print_debug "Expect less than $TIME sec, get $T"
- bstat=2
- fi
+get_duration()
+{
+ LOG=$1
+ RET=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
+}
+
+check_duration()
+{
+ LOG=$1
+ TIME=$2
+ OP=${3-gt}
+
+ get_duration $LOG
+ if [ "$RET" -$OP "$TIME" ]; then
+ print_debug "Expect $OP than $TIME sec, get $RET"
+ bstat=2
+ fi
}
run_bacula()
{
debug_wait
zstat=0
+ estat=0
if test "$debug" -eq 1 ; then
- bin/bacula-ctl-sd start
- bin/bacula-ctl-fd start $1
- bin/bacula-ctl-dir start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ ${scripts}/bacula-ctl-sd start -m
+ ${scripts}/bacula-ctl-fd start -m $1
+ ${scripts}/bacula-ctl-dir start -m
+ cat ${tmp}/bconcmds | ${bin}/bconsole -c ${conf}/bconsole.conf
return $?
else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ ${scripts}/bacula start >/dev/null 2>&1
+ cat ${tmp}/bconcmds | ${bin}/bconsole -c ${conf}/bconsole.conf >/dev/null 2>&1
return $?
fi
}
run_bconsole()
{
+ bconsole_file=${1:-${tmp}/bconcmds}
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ cat $bconsole_file | ${bin}/bconsole -c ${conf}/bconsole.conf
else
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ cat $bconsole_file | ${bin}/bconsole -c ${conf}/bconsole.conf 2>&1 >/dev/null
fi
}
run_btape()
{
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
+ cat ${tmp}/bconcmds | ${bin}/btape -c ${conf}/bacula-sd.conf tape | tee ${tmp}/log1.out
else
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
+ cat ${tmp}/bconcmds | ${bin}/btape -c ${conf}/bacula-sd.conf tape >${tmp}/log1.out 2>&1
fi
}
run_bscan()
{
if test "$debug" -eq 1 ; then
- bin/bscan $* | tee tmp/log.out
+ ${bin}/bscan $* | tee ${tmp}/log.out
else
- bin/bscan $* 2>&1 >/dev/null
+ ${bin}/bscan $* 2>&1 >/dev/null
fi
}
stop_bacula()
{
- bin/bacula stop 2>&1 >/dev/null
+ if test "$debug" -eq 1 ; then
+ ${scripts}/bacula stop
+ else
+ ${scripts}/bacula stop 2>&1 >/dev/null
+ fi
}
check_for_zombie_jobs()
{
- scripts/check_for_zombie_jobs $*
+ ${rscripts}/check_for_zombie_jobs $*
}
change_jobname()
oldname=$1
newname=$2
fi
- rm -f bin/1
- mv bin/bacula-dir.conf bin/1
- echo "s%${oldname}%${newname}%g" >tmp/1
- sed -f tmp/1 bin/1 >bin/bacula-dir.conf
+ rm -f $tmp/1 $tmp/2
+ mv ${conf}/bacula-dir.conf $tmp/1
+ echo "s%${oldname}%${newname}%g" >$tmp/2
+ sed -f $tmp/2 $tmp/1 >$conf/bacula-dir.conf
# echo "Job ${oldname} changed to ${newname}"
}
check_two_logs()
{
- grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
- bstat=${bstat-$?}
- grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null
+ grep "^ Termination: *Backup OK" ${tmp}/log1.out 2>&1 >/dev/null
+ bstat=${bstat:-$?}
+ grep "^ Termination: .*Backup Error" ${tmp}/log1.out 2>&1 >/dev/null
if test $? -eq 0; then
bstat=2
fi
- grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
- rstat=${rstat-$?}
- grep "^ Termination: .*Restore Error" tmp/log2.out 2>&1 >/dev/null
+ grep "^ Termination: *Restore OK" ${tmp}/log2.out 2>&1 >/dev/null
+ rstat=${rstat:-$?}
+ grep "^ Termination: .*Restore Error" ${tmp}/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=2
fi
- grep "^ Termination: *Restore OK -- warning file count mismatch" tmp/log2.out 2>&1 >/dev/null
+ grep "^ Termination: *Restore OK -- warning file count mismatch" ${tmp}/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=3
fi
- grep "^ Termination: .*Verify Differences" tmp/log2.out 2>&1 >/dev/null
+ grep "^ Termination: .*Verify Differences" ${tmp}/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=4
fi
+ grep "Encoding error for database" ${tmp}/log1.out > /dev/null
+ if test $? -eq 0; then
+ print_debug "Found database encoding error"
+ bstat=2
+ fi
}
check_restore_diff()
{
if test "$debug" -eq 1 ; then
- diff -ur build tmp/bacula-restores${cwd}/build
+ $rscripts/diff.pl -s ${src} -d ${tmp}/bacula-restores${src}
+ diff -ur ${src} ${tmp}/bacula-restores${src}
else
- diff -ur build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
+ diff -ur ${src} ${tmp}/bacula-restores${src} 2>&1 >/dev/null
fi
dstat=$?
}
+check_restore_bin_diff()
+{
+ if test "$debug" -eq 1 ; then
+ $rscripts/diff.pl -s ${bin} -d ${tmp}/bacula-restores${bin}
+ diff -ur ${bin} ${tmp}/bacula-restores${bin}
+ else
+ diff -ur ${bin} ${tmp}/bacula-restores${bin} 2>&1 >/dev/null
+ fi
+ dstat=$?
+}
+
+
check_restore_tmp_build_diff()
{
if test "$debug" -eq 1 ; then
- diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build
+ $rscripts/diff.pl -s ${tmpsrc} -d ${tmp}/bacula-restores${tmpsrc}
+ diff -ur ${tmpsrc} ${tmp}/bacula-restores${tmpsrc}
else
- diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
+ diff -ur ${tmpsrc} ${tmp}/bacula-restores${tmpsrc} 2>&1 >/dev/null
fi
dstat=$?
}
+# bstat is backup error
+# dstat is diff difference
+# estat is special error status (shown by print_debug message)
+# rstat is restore status
+# zstat is zombie job(s)
+#
end_test()
{
+ if [ x$notracedump != xyes ]; then
+ cat ${working}/bacula.*.traceback 2>/dev/null
+ cp -f ${working}/bacula.*.traceback ${dumps} 2>/dev/null
+ cat ${working}/*.bactrace 2>/dev/null
+ cp -f ${working}/*.bactrace ${dumps} 2>/dev/null
+ fi
+ if [ -f $tmp/err.log ]; then
+ cat $tmp/err.log
+ fi
+ if [ $estat != 0 ] ; then
+ echo " "
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: estat=$estat zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
+ echo " Status: estat=$estat zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
+ echo " "
+ exit 1
+ fi
if [ $zstat != 0 ] ; then
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
echo " "
echo " "
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
if [ $bstat != 0 -o $rstat != 0 ] ; then
echo " !!!!! Bad termination status !!!!! "
echo " !!!!! Bad termination status !!!!! " >>test.out
fi
echo " Status: backup=$bstat restore=$rstat diff=$dstat"
echo " Status: backup=$bstat restore=$rstat diff=$dstat" >>test.out
+ echo " Test owner of $SITE_NAME is $EMAIL"
+ echo " Test owner of $SITE_NAME is $EMAIL" >>test.out
echo " "
exit 1
else
echo " ===== $TestName OK `date +%R:%S` ===== "
echo " ===== $TestName OK `date +%R:%S` ===== " >>test.out
if test "$debug" -eq 0 ; then
- scripts/cleanup
+ ${rscripts}/cleanup
fi
fi
}
copy_tape_confs()
{
- scripts/copy-tape-confs
- scripts/cleanup-tape
+ ${rscripts}/copy-tape-confs
+ ${rscripts}/cleanup-tape
}
copy_test_confs()
{
- scripts/copy-test-confs
- scripts/cleanup
+ ${rscripts}/copy-test-confs
+ ${rscripts}/cleanup
+}
+
+disable_pluguins()
+{
+ for i in ${conf}/bacula-fd.conf; do
+ sed 's/Plugin/#Plugin/' $i > $tmp/1
+ cp -f $tmp/1 $i
+ done
+}
+
+update_win32()
+{
+ if [ -d $cwd/build/src/win32/release32 \
+ -a -d $cwd/build/src/win32/release64 ] \
+ || [ -d $cwd/release32 -a -d $cwd/release64 ]
+ then
+ echo -ne "Try to upgrade the FileDaemon:\t"
+ wget -qO - "$WIN32_ADDR:8091/install"
+ fi
}
debug_wait()
if test -n "$DRIVE" -a -n "$SLOT"; then
if test ! -c $DRIVE -a ! -b $DRIVE -a x$USE_VTAPE != x ; then
dir=`dirname $DRIVE`
+ if [ ! -d "$dir" ]; then
+ mkdir -p "$dir"
+ fi
touch $dir/slot$SLOT
fi
fi
load_slot1()
{
# Get a tape from slot1
-slot=`bin/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
+slot=`${scripts}/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
case $slot in
0)
- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=$SLOT1
;;
$SLOT1)
;;
*)
rewind_drive ${TAPE_DRIVE}
- bin/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=$SLOT1
;;
esac
rewind_drive ${TAPE_DRIVE}
case $1 in
0)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=1
;;
$SLOT1)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
slot=2
;;
$SLOT2)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ ${scripts}/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=1
;;
*)
esac
}
-
# Save current directory
cwd=`pwd`
if test "x${REGRESS_DEBUG}" = "x1"; then
db_name=${db_name:-"regress"}
db_user=${db_user:-"regress"}
db_password=${db_password:-""}
+working=${working:-"$cwd/working"}
+dumps=${dumps:-"$cwd/dumps"}
+bin=${bin:-"$cwd/bin"}
+
+# Bacula scripts
+scripts=${scripts:-"$cwd/bin"}
+
+# Bacula conf files
+conf=${conf:-"$cwd/bin"}
+
+# Regress scripts
+rscripts=${rscripts:-"$cwd/scripts"}
+
+tmp=${tmp:-"$cwd/tmp"}
+
+# Bacula source directory when copied here
+# also build directory
+src=${src:-"$cwd/build"}
+
+# Temp source directory so we don't mess up $src
+tmpsrc=${tmpsrc:-"$cwd/tmp/build"}
+
+export bin
+export conf
+export working
+export dumps
+export scripts
+export rscripts
+export tmp
+export src
+export tmpsrc
+
+bperl="perl -Mscripts::functions"
+export bperl
+
+mkdir -p ${tmp}
+touch ${tmp}/dir.out ${tmp}/fd.out ${tmp}/sd.out
CLIENT=${HOST}-fd
if [ x$USE_VTAPE = xyes ]; then
- mkdir -p $cwd/working/ach
+ mkdir -p $working/ach
SLOT1=1
SLOT2=2
- TAPE_DRIVE=$cwd/working/ach/drive1
- TAPE_DRIVE1=$cwd/working/ach/drive1
- AUTOCHANGER=$cwd/working/ach/config
+ TAPE_DRIVE=$working/ach/drive0
+ TAPE_DRIVE1=$working/ach/drive1
+ AUTOCHANGER=$working/ach/config
AUTOCHANGER_SCRIPT=disk-changer
DRIVE1=0
DRIVE2=1
+ cp /dev/null $working/ach/slot$SLOT1
+ cp /dev/null $working/ach/slot$SLOT2
cat > $AUTOCHANGER <<EOF
-maxdrive=2
-maxslot=10
+maxdrive=8
+maxslot=80
EOF
fi
AUTOCHANGER_SCRIPT=${AUTOCHANGER_SCRIPT:-mtx-changer}
+LD_LIBRARY_PATH=$bin:$LD_LIBRARY_PATH
+export LD_LIBRARY_PATH