echo "s% mail =%# mail = %g" >${outf}
echo "s% operator =%# operator =%g" >>${outf}
cp bin/bacula-dir.conf tmp/1
- sed -f ${outf} tmp/1 >bin/bacula-dir.conf
+ sed -f ${outf} tmp/1 > bin/bacula-dir.conf
echo " "
echo " "
echo " === Starting $TestName at `date +%R:%S` ==="
- echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
+ echo " === Starting $TestName at `date +%R:%S` ===" >> working/log
echo " "
export zstat
}
fi
}
+################################################################
+# Get information from logs
+get_mig_info()
+{
+ # Prev Backup JobId
+ JOBID=$1
+ LOG=$2
+ RET=`awk -F: "BEGIN { jobid=$JOBID } "'/Prev Backup JobId/ { cjid=$2 } /New Backup JobId/ { if (cjid == jobid) { print $2 } }' $LOG`
+}
+
get_duration()
{
-# LOG=$1
-# T=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
-# echo $T
+ LOG=$1
+ RET=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
}
check_duration()
{
- LOG=$1
- TIME=$2
- OP=${3-gt}
-
-# T=$(get_duration $LOG)
-# if [ "$T" -$OP "$TIME" ]; then
-# print_debug "Expect $OP than $TIME sec, get $T"
-# bstat=2
-# fi
+ LOG=$1
+ TIME=$2
+ OP=${3-gt}
+
+ get_duration $LOG
+ if [ "$RET" -$OP "$TIME" ]; then
+ print_debug "Expect $OP than $TIME sec, get $RET"
+ bstat=2
+ fi
}
run_bacula()
bin/bacula-ctl-sd start
bin/bacula-ctl-fd start $1
bin/bacula-ctl-dir start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ cat tmp/bconcmds | $bin/bconsole -c bin/bconsole.conf
return $?
else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ bin/bacula start >/dev/null 2>&1
+ cat tmp/bconcmds | $bin/bconsole -c bin/bconsole.conf >/dev/null 2>&1
return $?
fi
}
run_bconsole()
{
+ bconsole_file=${1:-tmp/bconcmds}
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ cat $bconsole_file | $bin/bconsole -c bin/bconsole.conf
else
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ cat $bconsole_file | $bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
fi
}
run_btape()
{
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
+ cat tmp/bconcmds | $bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
else
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
+ cat tmp/bconcmds | $bin/btape -c bin/bacula-sd.conf DDS-4 >tmp/log1.out 2>&1
fi
}
run_bscan()
{
if test "$debug" -eq 1 ; then
- bin/bscan $* | tee tmp/log.out
+ $bin/bscan $* | tee tmp/log.out
else
- bin/bscan $* 2>&1 >/dev/null
+ $bin/bscan $* 2>&1 >/dev/null
fi
}
stop_bacula()
{
bin/bacula stop 2>&1 >/dev/null
+ zstat=0
+ bstat=0
+ rstat=0
+ dstat=0
}
check_for_zombie_jobs()
check_two_logs()
{
grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
- bstat=${bstat-$?}
+ bstat=${bstat:-$?}
grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null
if test $? -eq 0; then
bstat=2
fi
grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
- rstat=${rstat-$?}
+ rstat=${rstat:-$?}
grep "^ Termination: .*Restore Error" tmp/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=2
if test $? -eq 0; then
rstat=4
fi
+ grep "Encoding error for database" tmp/log1.out > /dev/null
+ if test $? -eq 0; then
+ print_debug "Found database encoding error"
+ bstat=2
+ fi
}
check_restore_diff()
if [ $zstat != 0 ] ; then
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
echo " "
echo " "
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
if [ $bstat != 0 -o $rstat != 0 ] ; then
echo " !!!!! Bad termination status !!!!! "
echo " !!!!! Bad termination status !!!!! " >>test.out
load_slot1()
{
# Get a tape from slot1
-slot=`bin/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
+slot=`$scripts/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
case $slot in
0)
- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=$SLOT1
;;
$SLOT1)
;;
*)
rewind_drive ${TAPE_DRIVE}
- bin/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
+ $scripts/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=$SLOT1
;;
esac
rewind_drive ${TAPE_DRIVE}
case $1 in
0)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=1
;;
$SLOT1)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
slot=2
;;
$SLOT2)
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
slot=1
;;
*)
esac
}
-
# Save current directory
cwd=`pwd`
if test "x${REGRESS_DEBUG}" = "x1"; then
db_name=${db_name:-"regress"}
db_user=${db_user:-"regress"}
db_password=${db_password:-""}
+working=${working:-"$cwd/working"}
+bin=${bin:-"$cwd/bin"}
+scripts=${scripts:-"$bin"}
+
+export bin
+export working
+export scripts
CLIENT=${HOST}-fd
if [ x$USE_VTAPE = xyes ]; then
- mkdir -p $cwd/working/ach
+ mkdir -p $working/ach
SLOT1=1
SLOT2=2
- TAPE_DRIVE=$cwd/working/ach/drive1
- TAPE_DRIVE1=$cwd/working/ach/drive1
- AUTOCHANGER=$cwd/working/ach/config
+ TAPE_DRIVE=$working/ach/drive1
+ TAPE_DRIVE1=$working/ach/drive1
+ AUTOCHANGER=$working/ach/config
AUTOCHANGER_SCRIPT=disk-changer
DRIVE1=0
DRIVE2=1
fi
AUTOCHANGER_SCRIPT=${AUTOCHANGER_SCRIPT:-mtx-changer}
+LD_LIBRARY_PATH=$bin:$LD_LIBRARY_PATH
+export LD_LIBRARY_PATH