# A set of useful functions to be sourced in each test
#
+
start_test()
{
# Turn off email
echo "s% mail =%# mail = %g" >${outf}
echo "s% operator =%# operator =%g" >>${outf}
cp bin/bacula-dir.conf tmp/1
- sed -f ${outf} tmp/1 >bin/bacula-dir.conf
+ sed -f ${outf} tmp/1 > bin/bacula-dir.conf
echo " "
echo " "
echo " === Starting $TestName at `date +%R:%S` ==="
- echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
+ echo " === Starting $TestName at `date +%R:%S` ===" >> working/log
echo " "
export zstat
}
fi
}
+require_vtape()
+{
+if test x${USE_VTAPE} = x ; then
+ echo "$TestName test needs the vtape driver."
+ exit 0
+fi
+}
+
+require_linux()
+{
+os=`uname`
+if [ $os != 'Linux' ]; then
+ echo "This test $TestName runs only on Linux"
+ exit 0
+fi
+}
skip_if_no_autochanger()
{
fi
}
+check_files_written()
+{
+ LOG=$1
+ NB=$2
+ FILES=`awk '/FD Files Written:/ { last=$4 } END { print last }' $LOG`
+
+ if [ "$NB" != "$FILES" ]; then
+ print_debug "Expect $NB files, get $FILES"
+ bstat=2
+ fi
+}
+
+################################################################
+# Get information from logs
+get_mig_info()
+{
+ # Prev Backup JobId
+ JOBID=$1
+ LOG=$2
+ RET=`awk -F: "BEGIN { jobid=$JOBID } "'/Prev Backup JobId/ { cjid=$2 } /New Backup JobId/ { if (cjid == jobid) { print $2 } }' $LOG`
+}
+
+get_duration()
+{
+ LOG=$1
+ RET=`awk 'BEGIN {t["secs"]=1;t["sec"]=1;t["min"]=60;t["mins"]=60}; /Elapsed time:/ { last=$3*t[$4] } END { print last }' $LOG`
+}
+
+check_duration()
+{
+ LOG=$1
+ TIME=$2
+ OP=${3-gt}
+
+ get_duration $LOG
+ if [ "$RET" -$OP "$TIME" ]; then
+ print_debug "Expect $OP than $TIME sec, get $RET"
+ bstat=2
+ fi
+}
+
run_bacula()
{
debug_wait
zstat=0
if test "$debug" -eq 1 ; then
bin/bacula-ctl-sd start
- bin/bacula-ctl-fd start
+ bin/bacula-ctl-fd start $1
bin/bacula-ctl-dir start
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ cat tmp/bconcmds | $bin/bconsole -c bin/bconsole.conf
+ return $?
else
- bin/bacula start 2>&1 >/dev/null
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ bin/bacula start >/dev/null 2>&1
+ cat tmp/bconcmds | $bin/bconsole -c bin/bconsole.conf >/dev/null 2>&1
+ return $?
fi
}
run_bconsole()
{
+ bconsole_file=${1:-tmp/bconcmds}
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
+ cat $bconsole_file | $bin/bconsole -c bin/bconsole.conf
else
- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
+ cat $bconsole_file | $bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null
fi
}
run_btape()
{
if test "$debug" -eq 1 ; then
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
+ cat tmp/bconcmds | $bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
else
- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
+ cat tmp/bconcmds | $bin/btape -c bin/bacula-sd.conf DDS-4 >tmp/log1.out 2>&1
fi
}
run_bscan()
{
if test "$debug" -eq 1 ; then
- bin/bscan $* | tee tmp/log.out
+ $bin/bscan $* | tee tmp/log.out
else
- bin/bscan $* 2>&1 >/dev/null
+ $bin/bscan $* 2>&1 >/dev/null
fi
}
+bscan_libdbi()
+{
+ B=`echo $LIBDBI | sed 's/;//' | sed 's/;//g'`
+ B_D=`echo $B | awk '{print $3}'`
+ B_t=`echo $B | awk '{print $6}'`
+ B_p=`echo $B | awk '{print $9}'`
+
+ BSCANLIBDBI="${LIBDBI:+1}"
+
+ if test "$BSCANLIBDBI" = "1" ; then
+ BSCANLIBDBI="-D $B_D -h $B_t -t $B_p"
+ else
+ BSCANLIBDBI=" "
+ fi
+}
stop_bacula()
{
bin/bacula stop 2>&1 >/dev/null
+ zstat=0
+ bstat=0
+ rstat=0
+ dstat=0
}
check_for_zombie_jobs()
check_two_logs()
{
grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
- bstat=$?
+ bstat=${bstat:-$?}
grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null
if test $? -eq 0; then
bstat=2
fi
grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
- rstat=$?
- grep "^ Termination: *Restore OK -- warning file count mismatch" tmp/log2.out 2>&1 >/dev/null
+ rstat=${rstat:-$?}
+ grep "^ Termination: .*Restore Error" tmp/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=2
fi
- grep "^ Termination: .*Verify Differences" tmp/log2.out 2>&1 >/dev/null
+ grep "^ Termination: *Restore OK -- warning file count mismatch" tmp/log2.out 2>&1 >/dev/null
if test $? -eq 0; then
rstat=3
fi
+ grep "^ Termination: .*Verify Differences" tmp/log2.out 2>&1 >/dev/null
+ if test $? -eq 0; then
+ rstat=4
+ fi
+ grep "Encoding error for database" tmp/log1.out > /dev/null
+ if test $? -eq 0; then
+ print_debug "Found database encoding error"
+ bstat=2
+ fi
}
check_restore_diff()
{
- diff -r build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
+ if test "$debug" -eq 1 ; then
+ diff -ur build tmp/bacula-restores${cwd}/build
+ else
+ diff -ur build tmp/bacula-restores${cwd}/build 2>&1 >/dev/null
+ fi
dstat=$?
}
check_restore_tmp_build_diff()
{
- diff -r tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
+ if test "$debug" -eq 1 ; then
+ diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build
+ else
+ diff -ur tmp/build tmp/bacula-restores${cwd}/tmp/build 2>&1 >/dev/null
+ fi
dstat=$?
}
if [ $zstat != 0 ] ; then
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
echo " "
echo " "
echo " "
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat"
echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
if [ $bstat != 0 -o $rstat != 0 ] ; then
echo " !!!!! Bad termination status !!!!! "
echo " !!!!! Bad termination status !!!!! " >>test.out
fi
}
+init_slot()
+{
+ DRIVE=$1
+ SLOT=$2
+ if test -n "$DRIVE" -a -n "$SLOT"; then
+ if test ! -c $DRIVE -a ! -b $DRIVE -a x$USE_VTAPE != x ; then
+ dir=`dirname $DRIVE`
+ touch $dir/slot$SLOT
+ fi
+ fi
+}
+
+init_drive()
+{
+ if test a$USE_VTAPE = a; then
+ mt -f $1 rewind
+ mt -f $1 weof
+ else
+ cp /dev/null $1
+ fi
+}
+
+rewind_drive()
+{
+ if test a$USE_VTAPE = a; then
+ mt -f $1 rewind
+ fi
+}
+
+load_slot1()
+{
+# Get a tape from slot1
+slot=`$scripts/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1`
+case $slot in
+ 0)
+ $scripts/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ slot=$SLOT1
+ ;;
+ $SLOT1)
+ slot=$SLOT1
+ ;;
+ *)
+ rewind_drive ${TAPE_DRIVE}
+ $scripts/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1
+ $scripts/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ slot=$SLOT1
+ ;;
+esac
+}
+
+#
+# $1 has currently loaded slot, load the other one i.e. if 1, load 2;
+# if 2, load 1; if 0 load 1
+#
+load_other_slot()
+{
+rewind_drive ${TAPE_DRIVE}
+case $1 in
+ 0)
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ slot=1
+ ;;
+ $SLOT1)
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1
+ slot=2
+ ;;
+ $SLOT2)
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1
+ $scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1
+ slot=1
+ ;;
+ *)
+ echo "Something went wrong. Expected $SLOT1 or $SLOT2, got $1"
+ exit 1
+ ;;
+esac
+}
+
# Save current directory
cwd=`pwd`
if test "x${REGRESS_DEBUG}" = "x1"; then
# Source the configuration variables
. ${cwd}/config
+
+db_name=${db_name:-"regress"}
+db_user=${db_user:-"regress"}
+db_password=${db_password:-""}
+working=${working:-"$cwd/working"}
+bin=${bin:-"$cwd/bin"}
+scripts=${scripts:-"$bin"}
+
+export bin
+export working
+export scripts
+
+CLIENT=${HOST}-fd
+
+if [ x$USE_VTAPE = xyes ]; then
+ mkdir -p $working/ach
+ SLOT1=1
+ SLOT2=2
+ TAPE_DRIVE=$working/ach/drive1
+ TAPE_DRIVE1=$working/ach/drive1
+ AUTOCHANGER=$working/ach/config
+ AUTOCHANGER_SCRIPT=disk-changer
+ DRIVE1=0
+ DRIVE2=1
+ cat > $AUTOCHANGER <<EOF
+maxdrive=2
+maxslot=10
+EOF
+fi
+
+AUTOCHANGER_SCRIPT=${AUTOCHANGER_SCRIPT:-mtx-changer}
+LD_LIBRARY_PATH=$bin:$LD_LIBRARY_PATH
+export LD_LIBRARY_PATH