start_test()
{
+ # Turn off email
+ outf="tmp/sed_tmp"
+ echo "s% mail =%# mail = %g" >${outf}
+ echo "s% operator =%# operator =%g" >>${outf}
+ cp bin/bacula-dir.conf tmp/1
+ sed -f ${outf} tmp/1 >bin/bacula-dir.conf
echo " "
echo " "
echo " === Starting $TestName at `date +%R:%S` ==="
echo " === Starting $TestName at `date +%R:%S` ===" >>working/log
echo " "
+ export zstat
+}
+
+require_root()
+{
+MUID=`/usr/bin/id | awk -F= '{print $2}' | awk -F\( '{print $1}'`
+if [ $MUID != 0 ] ; then
+ echo " "
+ echo "You must be root to run this test."
+ echo " ===== !!!! $TestName not run at `date +%R:%S` ==="
+ echo " ===== !!!! $TestName not run at `date +%R:%S` !!!! ===== " >>test.out
+ echo " "
+ exit 1
+fi
+}
+
+require_tape_drive()
+{
+if test x${TAPE_DRIVE} = x/dev/null ; then
+ echo "$TestName test needs a tape drive, but has none."
+ exit 1
+fi
+}
+
+require_second_drive()
+{
+if test x${TAPE_DRIVE1} = x/dev/null ; then
+ echo "$JobName needs second drive, but has none."
+ exit 1
+fi
+}
+
+require_autochanger()
+{
+if test x${AUTOCHANGER} = x/dev/null ; then
+ echo "$TestName needs an autochanger, but has none."
+ exit 1
+fi
+}
+
+
+skip_if_no_autochanger()
+{
+if test x${AUTOCHANGER} = x/dev/null ; then
+ echo "$TestName test skipped. No autochanger."
+ exit
+fi
}
set_debug()
fi
}
+print_debug()
+{
+ if test "$debug" -eq 1 ; then
+ echo $*
+ fi
+}
+
run_bacula()
{
+ debug_wait
+ zstat=0
if test "$debug" -eq 1 ; then
- bin/bacula start
+ bin/bacula-ctl-sd start
+ bin/bacula-ctl-fd start
+ bin/bacula-ctl-dir start
cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf
else
bin/bacula start 2>&1 >/dev/null
fi
}
+run_btape()
+{
+ if test "$debug" -eq 1 ; then
+ cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out
+ else
+ cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out
+ fi
+}
+
+run_bscan()
+{
+ if test "$debug" -eq 1 ; then
+ bin/bscan $* | tee tmp/log.out
+ else
+ bin/bscan $* 2>&1 >/dev/null
+ fi
+}
+
+bscan_libdbi()
+{
+ B=`echo $LIBDBI | sed 's/;//' | sed 's/;//g'`
+ B_D=`echo $B | awk '{print $3}'`
+ B_t=`echo $B | awk '{print $6}'`
+ B_p=`echo $B | awk '{print $9}'`
+
+ BSCANLIBDBI="${LIBDBI:+1}"
+
+ if test "$BSCANLIBDBI" = "1" ; then
+ BSCANLIBDBI="-D $B_D -h $B_t -t $B_p"
+ else
+ BSCANLIBDBI=" "
+ fi
+}
+
stop_bacula()
{
bin/bacula stop 2>&1 >/dev/null
check_for_zombie_jobs()
{
- scripts/check_for_zombie_jobs $1
+ scripts/check_for_zombie_jobs $*
}
change_jobname()
{
+ if test $# -eq 1; then
+ oldname=NightlySave
+ newname=$1
+ else
+ oldname=$1
+ newname=$2
+ fi
rm -f bin/1
mv bin/bacula-dir.conf bin/1
- echo "s%NightlySave%$1%g" >/tmp/1
- sed -f /tmp/1 bin/1 >bin/bacula-dir.conf
+ echo "s%${oldname}%${newname}%g" >tmp/1
+ sed -f tmp/1 bin/1 >bin/bacula-dir.conf
+# echo "Job ${oldname} changed to ${newname}"
}
check_two_logs()
{
grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null
bstat=$?
+ grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null
+ if test $? -eq 0; then
+ bstat=2
+ fi
grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null
rstat=$?
+ grep "^ Termination: *Restore OK -- warning file count mismatch" tmp/log2.out 2>&1 >/dev/null
+ if test $? -eq 0; then
+ rstat=2
+ fi
+ grep "^ Termination: .*Verify Differences" tmp/log2.out 2>&1 >/dev/null
+ if test $? -eq 0; then
+ rstat=3
+ fi
}
check_restore_diff()
end_test()
{
+ if [ $zstat != 0 ] ; then
+ echo " "
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
+ echo " Status: zombie=$zstat backup=$bstat restore=$rstat diff=$dstat" >>test.out
+ echo " "
+ exit 1
+ fi
if [ $dstat != 0 -o $bstat != 0 -o $rstat != 0 ] ; then
echo " "
echo " "
- echo " !!!!! $TestName Bacula source failed!!! !!!!! "
- echo " !!!!! $TestName failed!!! !!!!! " >>test.out
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! "
+ echo " !!!!! $TestName failed!!! `date +%R:%S` !!!!! " >>test.out
if [ $bstat != 0 -o $rstat != 0 ] ; then
- echo " !!!!! Bad Job termination status !!!!! "
- echo " !!!!! Bad Job termination status !!!!! " >>test.out
+ echo " !!!!! Bad termination status !!!!! "
+ echo " !!!!! Bad termination status !!!!! " >>test.out
else
echo " !!!!! Restored files differ !!!!! "
echo " !!!!! Restored files differ !!!!! " >>test.out
fi
+ echo " Status: backup=$bstat restore=$rstat diff=$dstat"
+ echo " Status: backup=$bstat restore=$rstat diff=$dstat" >>test.out
echo " "
+ exit 1
else
- echo " ===== $TestName Bacula source OK `date +%R:%S` ===== "
+ echo " ===== $TestName OK `date +%R:%S` ===== "
echo " ===== $TestName OK `date +%R:%S` ===== " >>test.out
- scripts/cleanup
+ if test "$debug" -eq 0 ; then
+ scripts/cleanup
+ fi
fi
}
+
+copy_tape_confs()
+{
+ scripts/copy-tape-confs
+ scripts/cleanup-tape
+}
+
+copy_test_confs()
+{
+ scripts/copy-test-confs
+ scripts/cleanup
+}
+
+debug_wait()
+{
+ if test "x${REGRESS_WAIT}" = "x1"; then
+ echo "Start Bacula under debugger and enter anything when ready ..."
+ read a
+ fi
+}
+
+init_drive()
+{
+ if test a$USE_FAKETAPE = a; then
+ mt -f $1 rewind
+ mt -f $1 weof
+ else
+ cp /dev/null $1
+ fi
+}
+
+# Save current directory
+cwd=`pwd`
+if test "x${REGRESS_DEBUG}" = "x1"; then
+ set_debug 1
+else
+ set_debug 0
+fi
+
+# Source the configuration variables
+. ${cwd}/config
projects / bacula / bacula / blobdiff